Data point values on charts

How can I display data point values on the chart? They show
on hover but I need them on a printed version.

Use the dataLabelStyle attribute of cfchartseries.
For example:
dataLabelStyle = "value"
See:
http://livedocs.macromedia.com/coldfusion/7/htmldocs/00000228.htm

Similar Messages

How to add more data point in Pie chart

The default data point for Pie chart is 5, how could I add more data point, I notice that I can do assign the cell to the value under data in General tab property of chart pie, but, in the sample drill down, there is no value for that value, and it still has 6 data point.

Hi DFW
The sample file has got the spreadsheet range missing thats all. Just add the range you need to your pie chart.
Regards
Charles

Cant add more data points to numbers chart

I have a 2 axis 2D graph. I would guess i have about 150 data points along the y axis for both lines on the chart. I have been updating the chart each week no probem with new data points. However today, i can only seem to add a few more points - when i try to add past a certain amount of data points, the last 20 or so data points are removed from the series?
It simply will not allow me to add more data?
Any help on this matter would be greatly appreciated as the charts are for use in my business

Hi Jerrold, thanks for the reply.
I dont have category labels. I have a 2 axis 2D chart, with a line series and an area series on the chart. I add new data to the chart each week by clicking on either the line or the area series on the chart, then going to my data table beside the chart, and by holding apple command button and clicking on the relevant cells to add to the charts. As of this weeks adding, it starts of as usual, adding the cells to the line and area series, and thus adding data onto the existing chart and extending it out to the right, as it normally would. However, i can only add a certain amount of new cells (data points) to either the line or area series. When i go to add more, a very strange thing happens. The series switches from all the cells that are highlighted blue, to another table i have on the same document??? If i look at the Inspector in the Data box under the series tab, the data goes from the typical 'Table 1 :: D18', (highlighted in blue, to the following weird data point : 'D38,SFTGlobalID_CB7D88F601784CAC8DD283ECA59CFB41 :'
Its worth noting that although i an working on a brand new macbook pro, numbers has crashed on me a number of times when adding large amounts of data to the chart The table has 1,120 rows, and 11 columns. Only 1 in every 5 or so rows are plotted (on y axis), so roughly 200 or so data points for both line and area chart are plotted. And only 1 column is used for each chart. Thus i have 11 charts on the one numbers document. Is it a case of too much for numbers to handle?
I have just deleted all the y axis data for the area series for one chart, and added all the data from the whole table again, (rather than just adding this weeks to last weeks, which is where i saw the problem in the first place) to see if it made a difference. But none. Once i got to a certain point, if i add one more cell data point to the chart, the exact same thing happened as above - the highlighted data switched from what i had been highlighting the whole way down the table, to an entirely different table in the same workbook.
Any ideas would be greatly appreciated.

Data point in area chart

Hello,
I have an area chart where month from Jan to Dec is displayed in x-axis and values are on y-axis. When user hover over first data point which should be jan, it dispalys Feb. Jan data point is not dispalying in hover over. Also area chart does not start from
(0,0) coordinate. There is the s0me gap in x-axis and then Jan starts.
Can you help please?

Hi 1234alex,
Per my understanding that you have design an area chart but the first data point which show the Jan didn't show but start with Feb, right?
I have tested on my local environment and can reproduce the issue, the issue can be caused by you have set the "hide first and last labels along this axis" in the "Horizontal Axis Properties".
Details informaion below for your reference:
Right click the X chart axis and select the "Horizontal Axis Properties" and click the "Labels" on the left to check you haven't check the "hide first and last labels along this axis"
If you haven't check it but still can't see the Jan shown, please check the sorting expression(If you have added to order the month in the x-axis, please provide it) to see if it is correct.
I have add some sample data below and create area chart and also area chart combined with line chart, preview result as below, works fine:
If your problem still exists, please try yo provide some sample data of the table and also the snapshot of the chart, if you have using some expression or setting, please also provide them.
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Can you add the data information to the data points in a chart

I am trying to add the data information to the data points in a line chart. can this be done?

You can add Value labels to the series to show the numerical value at each data point. The control is in the Series section of the Chart Inspector (see green arrow).
If you are asking about text labels, such as the "Test 1", "Test 2", etc. in column A of the table, You can add these by copy/paste into a text box placed in front of the chart, or use a formula ( =Table 1::A1 ) to transfer the text into a single cell table placed appropriately on the chart.
Using single cell tables will allow automatic updating of the label if the content of the Table 1 cell(s) changes. Neither method will automatically reposition the label if there's a change in the data feed to the chart.
Regards,
Barry

Data point Values

By default, Keynote displays the values on each Data Point. Is there anyway I can only put the value on the last Data Point?

Use the dataLabelStyle attribute of cfchartseries.
For example:
dataLabelStyle = "value"
See:
http://livedocs.macromedia.com/coldfusion/7/htmldocs/00000228.htm

Web Application Designer (Line Charts-Data Points)

Hi
I have to display the query in WEB as a Line Chart
The Query is on Cal Day Vs Mean Value
The user enter the Cal Day (From/To)..the Line chart is supposed to display mean Value on No of Cal Days users choosed.
In query created variable for Cal Day..but how can i define the Data Points for the chart in the Web designer.
Bydefault we have to specift no of data points we required..how can i change that to be based on the range user entered
Than ks

Hi Krishna,
When you define a chart, you define a number of series, but when you run the WAD, it takes the number of series it has the query.
Regards,
Diego

Help with Capturing Business Graphics data point

Hi,
I created a BusinessGraphics UI element with SimpleSeries and assigned eventId for the categories and data points. I am able to get the series that is clicked through the event but I would like to know which point (value) is clicked as well.
The steps I followed are
1. Created BG UI element, category and SimpleSeries
2. Assigned eventIDs
3. Created an action class and mapped it to the UI element
4. Code in wdDoModifyView is
     if (firstTime)
       IWDBusinessGraphics chart = (IWDBusinessGraphics) view.getElement("bgCSB");
       chart.mappingOfOnAction().addSourceMapping("id", "pointID");
5. Implemented action class with one parameter (pointID) and able to get the value.
Can someone help me to get the data point values from the user click.
Appreciate your help.
Thanks,
Kalyan

You have done everything right, except I don't think you can do this with simple series.
Create something like this:
in the context:
series-> (this node can be with 1..1 cardinality and 1..1 selection)
   points->
       label (string)
       value (int)
       pointId (string)
in the business graphics:
create one series (not simple one) and add to it one point of numeric type.
in the properties of business graphics bind seriesSource to series context.
Series: bined poitSource to series.points
Series_points: bind eventId to series.points.pointId
                        bind label to series.points.label
                        bind valueSource to series.points
Values (these are the numeric values): bind value to series.points.value
in wdDoModify method do the same thing as you have done already.
Now, when you click on a point you will receive in your event in pointId variable the pointId context attribute value.
Best regards,
Anton

Customize Mouse over values when hovering on a chart data point

Hi
Can someone please help me here? I have a dashboard which displays 4 series in a combinational chart. Along with the numeric values, I have another column which displays the commentary / justification of a data point on a particular date.
I want to show this as a mouse over value to change when user hovers over different dates.
Is it possible?

Isakov,
Here you go...
http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html
-Anil

How to show data value labels in the charts without moving my mouse on the data point?

Sometimes I need to show a chart with data value labels which is not necessary to move my mouse on the data points. However, it seems Xcelsius does not support this simple feature. Any alternative ways?
Many thanks!

Currently, Xcelsius does not support display of labels at data points. It would be difficult to move and update labels on a chart with dynamically updated data. However, a work around for a static chart would be to add a Label component in the desired location. This can be done for multiple static charts by using dynamic visibility.

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

How to remove values data points from Apex3 Flash Chart

Hi
I am using a Apex 3.2 and I have to put Flash Charts in my application. But since the charts have are smaller in size, I do not want to have the data points coming up in the chart. I have planned to show them using hints. But unfortunately, I am not able to hide the Data Points. Can you please help. Thanks Sahcin. Here is my custom XML.
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<root>
     <type>
          <chart type="Stacked Horizontal 2DColumn">
               <animation enabled="no"/>
               <hints enabled='yes' auto_size='no' width='200' height='20' horizontal_position='left' vertical_position='top'>
                    <text><![CDATA[{NAME}, {VALUE}]]></text>
                    <font type="Verdana" size="10" color="black"/>
                    <background color="0xF4F4F4"/>
               </hints>
               <arguments show="no"/>
               <names show='yes' position='top'/>
               <values show="no" prefix="$" postfix="" decimal_separator="." thousand_separator=',' decimal_places="2"/>
               <column_chart column_space='20' block_space='20' left_space='0' right_space='0' up_space='0' down_space='0' round_radius='0'>
                    <border enabled="no"/>
                    <block_names enabled="yes" placement="chart" rotation="45" x_offset="0" position="left">
                         <font type="verdana_embed_tf" size="8" color="0x000000"/>
                    </block_names>
                    <background type="gradient" gradient_type="linear">
                         <alphas>
                              <alpha>100</alpha>
                              <alpha>100</alpha>
                              <alpha>100</alpha>
                         </alphas>
                         <ratios>
                              <ratio>0</ratio>
                              <ratio>120</ratio>
                              <ratio>0xFF</ratio>
                         </ratios>
                    </background>
               </column_chart>
          </chart>
          <workspace>
               <background enabled="yes" type="solid" color="0xF4F4F4" alpha="0"/>
               <base_area enabled="no"/>
               <chart_area enabled="yes" x="100" y="50" width="600" height="300" deep="0">
                    <background enabled="yes" type="solid" color="0xCCFF99"/>
                    <border enabled="yes" size="1"/>
               </chart_area>
               <x_axis name="Region" smart="yes" position="left_center">
                    <font type="Verdana" size="10" color="0x000000" bold="no" align="center"/>
               </x_axis>
               <y_axis name="Booking Amount (kUSD)" smart="yes" position="center_bottom">
                    <font type="Verdana" size="10" color="0x000000" bold="no" align="center"/>
               </y_axis>
               <grid>
                    <values>
                         <lines size='1' color='0x15771A' alpha='100'/>
                    </values>
               </grid>
          </workspace>
          <legend enabled="yes" x="0" y="0" rows="2" rows_auto_count="no">
               <names width='80' enabled='yes'/>
          </legend>
     </type>
     #DATA#
</root>Edited by: user779712 on Nov 3, 2009 4:45 PM
Edited by: user779712 on Nov 3, 2009 4:46 PM

Well going in point by point and deleting is certainly one way of going about it. Of course that would defeat the entire purpose of having this great programming enviroment that is capable of doing that kind of thing for us.
Is your text file small enough to upload? Obviously you know what the criteria are for judging whether or not a data point is acceptable so it should be simple enough to program. Give us a bit more information and I can assure you there will be a race between LabVIEW experts to see who can post the cleanest, simplest, and fastest piece of code that will do what you need. My wager is on altenbach, but there are a few others here that are almost as impressive.

Chart - Reading series value but not from data point

Hi All,
I have a single line series on my chart, values on Y axis,
hours along X. I have values for each hour of the day for 24 hours,
e.g. 25 data points.
First value is say 200 at 0000 UTC
Next value is say 300 at 0100 UTC
Next value is say 900 at 0200 UTC
etc. etc.
Now I have this chart loaded, on screen etc. How would I then
find out what the value of the series is when the time (X axis) is
0130 UTC, or 0115 UTC etc. etc.
I.e. I want to be able to say at any time on the X axis, give
me the Y value of the line on chart.
Any pointers gratefully received.
Cheers
Ian

I wouldn't go reading some external app's (proprietary-format) config file - you're just setting yourself up for a fragile app if that other app ever changes the layout of that file.

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

How can I connect dots across missing data points in a line chart?

Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1              Column 2      Column 3
Aug 16, 2011         87.1             15.4
Aug 17, 2011         86.6
Aug 18, 2011         86.1
Aug 19, 2011
Aug 20, 2011         85.7             14.6
Aug 21, 2011         85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!

Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Data point values on charts

Similar Messages

Maybe you are looking for