Data points not visible on xy chart

I am trying create an xy chart (a scatter plot) in staroffice (.sxc) using two sets of data:
Data 1:
-0.15
-0.1
0.04
0
-0.1
0.18
-0.05
0.08
0
Data 2:
5
50
80
70
80
80
50
90
80
After having selected my data, axis specifications, etc, when I click "create" , the chart is created, but no data points are visible. I have created another chart with different data where the data points are visible
I have not modified the axes scale.
The data points will display on any other type of chart except the scatter plot, which is the one I need. Has anybody experienced this problem/know how to deal with it?

Where, for example, the first point is (-0.15, 5) where -0.15 in Data 1 is equivalent to 5 in Data 2

Similar Messages

BIP 11.1.1.7 - Stacked Bar chart data label not visible in pdf

Hi all,
I have a report built with the online editor. This contains a stacked bar chart with percentage values in a repeating section and I made the property DataVisible=true.
When I view the report in interactive mode it all works: I can see the data label for every value of the parameter but when I view in any other format (PDF, PPT, ecc..) the data labels are visible in the first chart (for the first value of the parameter) while in the other charts they aren't. This doesn't happens for other types of chart, for example with a pie chart.
Can someone help me or tell if it is a bug?
Thanks,
Micaela

Hi Mitalee,
Would you please check the PAM at https://websmp108.sap-ag.de/~sapidb/012002523100018972812014E
On page 11 it says 64 bit IE11 is not supported; is your IE11 32 bit or 64 bit?

Date Types not visible in CRM Service Request

Dear Friends,
I am implementing Service Requests in CRM 7.0 in our project
I have configured the Date Types and assigned them to the Date profile
The Date profile i have assigned it to the Transaction Type
But when creating the new Service Request Transaction Type the dates are not appearing
Can you help me by directing me to any missing config
Regards,
Raj

Hi,
check if you have set the screen assignments in the date profile. When you assign the date type, in the left navigation area, one level below, you have to set the visibility of the date type.
Regards, Toine

Data series property not visible in the chart properties

Hi Experts,
We are using BI 7.0 and I am trying to open the data series property so that i could use a trend line in my bar chart in WAD.
But when i double click on the chart web item, it doesn't open the chart wizard. And it doesn't have the data series property in the properties of the chart item.
I wonder what the problem is.
Any help is appreciated and rewarded with points.
cheers,
Sri

Thanks Matthias. When i try to select edit by right clicking on the chart item or click on this edit button in the parameters screen, i get an error.
The error says:
An unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the appln will be shut down immediately.
The Specified module could not be found.
If i click continue, nothing happens and i dont find this data series property in the parameters screen.
Thanks,
Sri

Multi Resource Scheduling (MRS) - resources not visible on Gantt chart mode

I need your expertise help to resolve this issue.
We are on MRSS 7.0 and ECC 6.0.
When I run transaction /MRSS/PLBOORG, I am able to see the demands show up.
However from resources point of view, I can see them on a table based planning but not able to see the resources in the Gantt chart mode.
The user interface profile (for layout) is set up for 'Planning board for DPD Gantt' as well as for 'Planning board for Resources'.
Reports to transfer the resources from ECC to MRS have been executed.
Any help to fix this issue would be greatly appreciated.
Thanks
Venky

Hi Mark,
Check the following:
1) You have run the report /MRSS/HCM_RPTWFMIF with transfer qualifications as checked. I guess (from your other post) this data is going in own HR box instead of MRS box (due to RFC issue)
Check the table: /MRS/D_BAS_REQ
If you solve the RFC problem, this should get solved automatically.
2) When you created a Requirement profile, you need to attach it on the "Internal" tab of the operation
Now check following:
1) Right click on demand and select "Required Qualifications" -- It should show the qualifications
2) Right click on Resource and select "Qualifications" -- It should show skills of resource
If 1 fails - Order Qualifications are not transferred !!
If 2 fails - Resource qualifications are not transferred - RFC issue (may be)
If both are there then the suitable resource should work.
If both 1 and 2 are not there then 100 % result is correct -- Because from the demand side no skill is required so each resource is qualified to do the job...
Regards
Varun

Power View Created Using Excel Data are not visible in BI Docs

I have created a Excel sheet with data and Then I added a Power View for that data set. I added this Excel Sheet to the Power BI Docs in Office 365 share-point Online. But when I open this uploaded Excel file.
There is only the Datasheet but no pages of Power Views of that data. How can I make this power Views visible in the Excel sheet.
Thanks

Normally, when you open an excel file, using excel online, (not on phone or tablette, just by using your laptop) the report will appear correctly.
I was in your case when i didn't have right access in Power BI in Office 365, so make sure that your account have right access in Power BI in Office 365. (you can talk to the administrator of Office 365 for more information).

Custom Infotype - Data entered not visible afterwards

Hi,
I am new to ABAP HR and created infotype first time ever. Now the data which I am entering on the screen gets saved after clicking on SAVE. But it should be later visible when we want to see it using Change or Display mode which is not happening.
Do we have to code in the infotype as we do in screen. Can SET/GET Parameter id used?

- Did you follow the rule of a guide like [Developing an Infotype|http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/a8774f977f17b5e10000000a1553f6/frameset.htm] ?
- Can you "see" your data with SE16n browser ?
Regards,
Raymond

Description data is not visible in Reports

Hi,
I have master, its description is parted in 2 parts, due to length greater than 60. When I try to see data in report, it does not show description1 for few Materials but description 2 is visible , even description1 is present in Data Target.

Hi,
Is the report based on master data or any other infoprovider like cube/ODS?
Check the report in RSRT also check in LISTCUBE with simialr conditions. If it is there in the data target, and the material is appearing in the report then it should be visible in the report.
Regards,
Ramesh

Data Source not visible in Data Source Tree in 7.0 System

Hi Experts
I have a CO_PA Data-Source that I have brought into our Development System from an other R/3 System via RSDS and that all worked fine. Trying to get it into the System via "Replicate Data Source" of the Source System didn't work even do the System showed me in the System_line on the bottom, that it was saving Data-Source etc, while replicating.
The thing is now, that even do I managed to activate my Data Source via RSDS, build a Transformation, and fetcht the Data out of the Source System into PSA, my Data-Source-Tree just show's me a Top-Node called "NEW_HIER_ROOT" for this Source-System but not my Data-Source underneath !!
Can anybody help me on this behaviour of the Data Source Tree ?
Thank you
Armin

Worked perfect
Thank you very much Simon !
Best regards
Armin
Edited by: Armin Baggenstos on Feb 25, 2010 1:23 PM

In ipad,excel text data is not visible for Java developed WebApplication

I have been struggling to fix this critical production defect from quite long time. Any help is appreciated.
I have generated .xlsx file using custom web application. The generated excel is working fine in windows system but not in iPad. Not sure of what exactly the problem was.On openings the same with iPad safari browser, The excel is showing cells for ‘date and numbers’ but not for text content.
If the downloaded excel is opened using ‘quick office’ then it is showing everything.
I have coded in java as below:
response.setContentType("application/vnd.openxmlformats-officedocument.spreadshe etml.sheet");
response.setContentLength((int) file.length());
            String fileName = "abc.xlsx;"
           response setHeader("Content-Disposition", "attachment; filename=" + fileName);
response.setHeader("Pragma", "public");
           response setHeader("Cache-control", "no-transform");
            input = new BufferedInputStream(new FileInputStream(file));
            output = new BufferedOutputStream(ServletActionContext.getResponse().getOutputStream());
         byte[] buffer = new byte[8192];
         for (int length = 0; (length = input.read(buffer)) > 0;) {
             output.write(buffer, 0, length);
            output.flush();
Let me know if you need more info.
Regards,
Surya

You would do much better to post your question in the developers' forum, where your fellow techies can be found. We tend to be just simple users here.

Access Point not visible in UMS server for Application using UMS adapter

Email Driver Properties for email is configured in UMS and works fine which means its able to poll for any incoming Email from the Configured Account.
Now i am builiding a soa Composite application and and using UMS adapter to receive that incoming mail and process it further.
I have succesfully deployed that application in my soa server but it doesn't show any access point for that application.
I have followed oracle Documentation (section 11.2.3.3)
http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/ums_adapter.htm
how to get that Access point configured for application ?
Please Help.
Thanks in Advance
Divyanshu

Thanks for the reply.
I had readded the access points after phone reset, so they are available under internet destination but none of the apps are able to see them.
I also saw 3-4 processes listed under panic tab in KillMe application, not sure if being inside panic tab means that the processes crashed, i hope it's not a hardware related problem.

Entry Point not visible in Navigation

Hello,
we have a strange behaviour in the portal. We created a role and assigned Worksets, Pages and iViews to the role. The role is defined as an entry point.
So long everything worked fine.
We transported the whole package to an other system. On this system we assigned the role to a group xxx-all. nearly every portal user is member of this group. Now the following behaviour occured:
-Not every user can see this role, even it is assigned to the user (via the group)
-A user who was not able to see the entry point became able to see the entry point after assigning him to an other group (the admin role is assigned to this group)
-After assigning the role to a single user directly the user was still not able to see the entry point.
My first question is: Is it possible that the portal content permissions on the role have impact, whether the role can be seen or not. In my opinion those settings have no impact.
Or is there an other place in the portal where permissions can be set that maybe cause this behaviour?
Any other ideas?
Kind regards,
dominik

Hello,
thanks for your help...
in the link above the following is described:
<i>The availability of roles at runtime in the navigation iViews (top-level navigation and detailed navigation) is determined by the users, groups, and roles assigned to a role principle in the Role Assignment tool. <b>The end user permission setting on role objects has no effect on the runtime availability of roles in the portal navigation.</b></i>
This means that the setting of permissions has no impact on the availibility of a role as long as the role is assigned to a user... Or do I understand something wrong?
Kind regards,
dominik

Data flow not visible while creating remote cube.

Hi SDN,
I am working on a remote cube. I need to link the infosource to remote cube. I have selected the source system and assigned.
I have done, like--Remote cube --> Context Menu --> Show Data flow , and I wanted to see the source system , Info source and the remote cube, but could not find them .
Guide me what I've missed /went wrong.
Thanks in Advance
Ankit

Hi,
Remote cube is technology where you report on data which is stored in the source system. While creating the Infocube you have to select Remote Infocube Radiobutton and in the next screen it will ask you for the infosource.
In that infosource you can assign the datasource in the infosource menu.
Now you see the data flow.
Hope it works,
Regards,
Sasi

Enhanced Data Type not visible in SPROXY

Hello experts,
I've enhanced my personal data type with some extra fields...
I activated this and the change can be seen in the Message Type and the Service Interface.
Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
What's wrong? Please advice.
Thanks a lot!
Dimitri

Hi Dimitri,
There should not any problem while generating proxyies again please chek two things in your case
1.Wether the Activation is done prperly or not.
2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
Thread:
Re: Simple questions about proxy
Configutaion guide for checking Proxy connections
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thanks,
Ram.

Unloading Point & Receiving Point Not Visible in Invoice.

Hi All,
I have one condition type YFRT which is get updated on Unloading Point & Receiving Point.
I want to update it in Invoice but in invoice nowhere i can see Unloading Point & Receiving Point.
ie. which gets copied from SO.
Now its showing Unloading Point & Receiving Point missing when i update the condition in Invoice.
Condition record is maintained on Unloading Point & Receiving Point.
How to proceed?
Reg,
Antaa21

Hi
Does it get populated in your sales order ? THe reason I ask is that if you calculate the condition in the order and do not recalculate it at the time of invoicing you should get the condition copied as-is.
Anyway, if you need to fill the shipping point in the pricing structure, KOMK, you can use exit RV60AFZZ. Here you can add a logic telling the system where to find the value and set it in the invoice pricing.
Does it help you ?
best regards
Michael

Data points not visible on xy chart

Similar Messages

Maybe you are looking for