Data Protection Verification Stuck on Iomega StorCenter ix2-200

Anybody can kindly advise how to handle this issue?
When logging into the storage web management UI 2 weeks back, I saw below message:
Verifying data protection configuration. Verification is 1% complete.
Now it is still 1% only, so I am thinking something must be wrong even though my NAS looks still working fine.
May I know how to deal with it?
Thanks in advance!

My device is ok now. The '...1%' message has gone after being stuck for weeks. There had been another data protection verification activity afterwards which completed quickly.
From event log I could only see very brief info like:
"9029","2014-08-29 10:49:37","","INFORMATION","Verifying storage data protection."
but it does not provide any value...

Similar Messages

  • Iomega StorCenter ix2-200 ver 2.1.44.30050

    Help me...
    Hope there is someone who can help me
    I bought 2 x 3tg WD HD and nestled in my Iomega StorCenter ix2-200
    2.1.44.30050 ..
    How do I get it to work ??
    I hope son body help me

    Hello AllanUrup
    What is the issue you are having when trying to use the ix2-200?
    Have you already checked the ix2-200 Knowledge Base regarding the issue?
    If you are having issues using the WD 3 TB disks with the unit, be sure that you followed the upgrade guide from here.
    Also just a heads up, the ix2-200 did not ship with disd larger than 2 TB.  Some users have been able to use larger disks, however it usually ends up causing RAID instability.  
    The ix2-200 Cloud Edition and higher support disks larger than 2 TB officially. 
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Iomega StorCenter ix2-200 version 2.1.48.30125 - can't browse folders

    Hi, I have a Iomega StorCenter ix2-200.  Everything is working fine, I can browse and access folders using windows explorer.  BUT, as soon as I added it to our domain, if I access it from explorer using \\192.168.3.15\ it will prompt me for a password, and no password is working....so I cannot see any folder. I would like it to work as any NAS do, meaning I would like to see the folders and then set permissions on them. I do not want it to prompt for a password.  What am I doing wrong?  thank you!

    Hello lorenzo_phse,
    Are there any local users stored on the NAS?
    Those credentials should work.
    Have you tried mapping one of the shares from a Domain machine?
    It might also be worthy to note here that the firmware version is fairly old and it is possible that there may just be a compatibility issue.
    Here is a link to the support page for the ix2-200:
    https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1071

  • Iomega - StorCenter iX2-200 - TUTORIAL

    How do I set up the Airport Extreme so that it works well with the Iomega StorCenter ix2-200. I would not think any tutorial for theAirport settings in which the manual says Iomega.
    Regards,

    My best advise to you would be to return the unit if at all possible. I have had nothing but trouble with mine and iomega support is dreadful.
    Currently on the 2nd unit. Had a hard drive fail on this one 2 weeks ago, they have still not authorised a replacement drive and today the 2nd drive has also failed. Another dead unit.
    Run a mile

  • Iomega StorCenter ix2-200 device fails when powered. Best way to retrieve data

    Hi, I'm new here because until now I've been lucky enough to experience no issues with my NAS.
    Unfortunately, as of this morning when I power on the ix2 the '!' light blinks red. I can't connect to it through my computer and the desktop Iomega program, under 'dashboard' everything seems as usual except the pie chart showing space usage is not there. But it does still say the device is operating normally. However, when I click on Users or Shared Storage it says 'Disks Not Ready. The selected function is not available due to the state of the disks. Visit the dashboard for details.'
    Can anyone advise me what to do from here? I keep a backup elsewhere but I would like to get a few little things of that have been added since my last backup if possible though, it's not the end of the world if it's not.
    Many thanks, James.

    Can you create new shares? Some users have been able to retrieve their data by adding the shares back by the same name. Not sure if it will be the same case here. A Linux-based device should be able to read from the drives, so there may be an error on the drive or a bad sector possibly. You may need to use a data recovery service to retrieve the data.
    You could try one other thing by accessing the hidden support page.
    Follow the instructions here: http://www.vmcutlip.com/index.php/2013/04/howto-enable-ssh-root-level-access-on-an-iomega-storcenter...
    Select "Recover Disks". I would only do this as a last resort and are not concerned with losing the data.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Iomega StorCenter ix2-200 - Harddrive failure.

    Hi, I own a Iomega ix2-200. It's the 2x2 GB Device with firmware version: 2.1.42.18967A few weeks ago the red-LED started to blink in front of the device.
    I check the Iomega system manager and it says.
    "The Iomega StorCenter device is degraded and data protection is at risk".So I check the log.It says:10/07/2013 8:05 pm Drive number 1 cannot be detected.10/07/2013 8:05 pm Data is available, but a failure has been detected. My question is. How do I know what drive is "Drive number 1" and how do I know what type of drive I need to replace the old one with?I really would prefer if I could fix this problem myself rather than to send the whole device for repairs when it's only a drive that's broken. Thanks for your time // Max B

    Hi Africa13 Yeah they should do fine, are either of your current disks operational?  When you replace the drives, the Iomega software is actually stored on the existing drives, not the enclosures built in memory. So when replacing, it will need a drive with the software on it. You basically replace one drive at a time and then allow the new drive to build. Once its complete, you replace the other and allow it to build then the same way. I had no issues with my two WD 2TB 3.5" SATA-600 IntelliPower 64MB Caviar Red that I put in, so you should be fine. Kind Regards Buckweed

  • Iomega StorCenter ix2-200 - Max HDD

    Hello I have the iomega storcenrt ix2 and like to know what is the max hdd suportted 4T?6T?8T?

    Hello rsfneo
    There are several ix2 models so I will list them with the different maximum supported drive size.
    ix2 (original) 1TB disks
    ix2-200 (non-cloud edition) - 2TB disks
    ix2-200 CE - 3TB disks
    ix2-ng/dl - 6TB disks HDDs approved for use with ix2-ng and ix2-dl
     

  • Сетевой накопитель Iomega StorCenter ix2-200

    Есть сторцентр iOmega, полетел 1 винт, второй как бы живой. Сигейты.
    Заменил винт на WD, один, второй рабочий Сигейт. И хранилище вообще не грузитцоо. Курил  iXBT.comhttp://forum.ixbt.com/topic.cgi?id=11:42027-10, и множество других форумов, пробовал прошивать с флешки и поверцикл делать, ничего не помогает WLoD и все. Белый диод мигает, и ничего не загружается, по DHCP не видится.
    Пробовал как с одим винтом, так и с двумя, на Оф сайте
    https://lenovo-eu-ru.custhelp.com/app/a … a_id/30406
    ничего путнего не нашел, все что предлагается не работает.
    У меня 2*1Tb

    При загрузке DHCP выделяет адрес, он пингуется, но не telnet, ни FTP не работает. Соединение отвергается.
    Через минут 10 обрывается и пинг.

  • Iomega Storcenter ix2 stops working

    I have an Iomega Storcenter ix2 4TB (on the bottom it says ix2-NG, there is no USB port on the front). It is a basic set up, I just use it as a 2TB in morrored raid and use it for backup. I often connect through finder on OSX 10.9, clickon the drive it asks to connect, I connect as guest. I then often use it to watch films that are stored on the NAS. One night after makig no changes (that I know of) I was watching a film and it stopped. 
    Now what happens is clicking on Ix2 in finder no longer works, but I can get in through connect to server. But after about 20 mins both lights on the front are constantly lit and teh NAS no longer works. Its not detected by my computer, neither MAC nor PC, the power button will no longer work, the reset does nothing. If I unplug and plug it back in again, it works ok for about 20-30 mins but then hangs again and become completely unresponsive.
    If anyone has an idea what happened and how to fix it I would be really greatful

    Here is a link to support for your area. You should contact them so they can help with the diagnostics and assist with any replacement parts if needed.
    Contact Us — Europe
    You can also email the registration group to update your warranty status if needed. They will need the proof of purchase and contact info.
    Product Registration Information

  • StorCenter ix2-200 Cloud Edition 6TB disk supported?

    Hi Community,
    I have a 2x1TB StorCenter ix2-200 and I would like to upgrade the disks to bigger size. I see that WD RED 4TB is supported, but I would like to buy two 6TB at same value/GB. But will it work? I know it's not officially compatible (yet), but 1,2,3,4 TB are already approved.
    System says it's up-to-date on the firmware.
    Regards
    Jonas

    It is a matter of hardware/software compatibility and limitations.
    The hard drives in your Iomega ix2-200, ix4-200d, ix4-200r, px12-350r and ix12-300r can only be replaced with the specific model and capacity of drive that Iomega has qualified for each device.
    Using other disks won't work, could cause operating system damage, and may void your warranty.
    Here is a compatibility list and any drives 3TB or lower should work.
    HDDs approved for use with ix2 and ix2-dl
    Also see:
    Upgrading the storage capacity for an ix-series network storage device

  • StorCenter ix2-200 disrupts network switch

    I have an Iomega StoreCenter IX2-200 that is connected via ethernet to a Netgear GS105 Gigabit ethernet switch along with other devices such as my laptop, printer and a different/older Iomega StorCenter.  Then the switch itself is connected to a Netgear router (through another switch that services the rest of my home).  Everythying has worked fine for a few years.  Now I am suddenly unable to connect to my NAS devices.  And the lights on the Netgear switch will cycle between all lights on all ports blink together, then the lighs for each port with light in order.  Then it repeats.  I discovered if I unplug my IX2-200 from the switch, all activity returns to normal (all other devices, including my older StorCenter work fine).  I tried plugging it in to different ports on the switch and get the same issue regardless where I plug it in.  Does it sound like my IX2-200 enclosure (and the internal network adapter) need to be replaced?  The lights on the IX2-200 seem to be indicate normal functioning and I can hear the disks spinning normally when I restart it.  Any ideas how to diagnose what the problem is?  I am hoping I can just find another NAS enclosure that supports SATA II disks and switch enclosures.  But don't want to waste my money if that's not the issue.  Any help is appreciated.

    UPDATE: I connected the ix2-200 directly to my router and it appears to work. I cannot connect to it to use the management utility via Internet Explorer (certificate issues, then won't connect) but can get to it via Chrome. Oh well, so there is still something buggy with my configuration somewhere but at least the ix2-200 is working,

  • Iomega StoreCenter ix2-200, Poolstatus nicht verfügbar

    Hallo,
    Ich habe ein gebrauchtes StoreCenter ix2-200 gekauft und die Firmware 3.2.8.30031 installiert.
    Zusätzlich verwende ich Windows 8 und den Lenovo EMC Storage Manager.
    Leider kann ich auf der ix2 keine Freigaben einrichten, da die Fehlermeldung:
    Die ausgewählte Funktion ist auf Grund des Poolstatus nicht verfügbar.
    Habe ich eine falsche Software geladen?

    If you are not using Gigabit Ethernet but are using 10/100 Ethernet then expect slows as molasses performance. Gigabit Ethernet is roughly as fast as using a basic USB drive for backup. 100 Mb/s Ethernet is 10 times slower.

  • Iomega StorCenter ix2 white LED blinking after fw update

    Hi,
    today I tried to update the firmware of my ix2, don't know if it is the ix2 dl as the case looks like this http://shop.lenovo.com/de/de/servers/network-stora​ge/lenovoemc/ix2/ but with StorCenter instead of ix2-dl written on the front. As Version 3.3.2.24208 was installed, I manually uploaded ix2-ng-3.3.2.29823.tgz as a first update step to be able to update to 4.0.6.19294  in the next step as recommended in the FAQ. 
    see https://lenovo-eu-en.custhelp.com/app/answers/deta​il/a_id/31178
    But after successfully deploying the new firmware and the automatically reboot, the device sticks to a glowing blue HDD LED and a blinking white power LED. I read about the chance to boot from an USB flash drive but I can't find the image to prepare the USB flash drive.
    Can you please provide me with this image or tell me what I can do to access my device again?
    Thanks.

    You can put the serial number in the box under "Find Your Product" to see if it is in warranty still. If you still have the original purchase receipt, you can contact technical support and they will update the warranty if it is still within the warranty period. Unfortunately, only technical support can provide the link for the imager as you have to sign a non-disclosure agreement.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Slow startup after installing on my StorCenter ix2-200 CE the latest firmware version 3.2.10.30101

    Hi,
    After installing some weeks ago the new firmware version 3.2.10.30101, the startup of my device is taking consistently around 45-60 minutes to be full operative, accessing to its web interface or being mapped and available the different disk units that i have configured.
    What about the corresponding warranty that should have the new firmware? If it has being published and recommended by Lenovo, it should have the corresponding period of warranty.
    So:
    1.- Has the root cause been detected? Should we have a new firmware version solving it? Because it seems downgrade to previous firware version is not possible.
    2.- Could you confirm a possible workaround? Disconnect network cable and startup device till consisten white led...?
    3.- For an alternative solution, can it help to rewrite this firmware version? How is the procedure?
    4.- Does full factory reset help? If yes, i can look for making a backup, and try it.
    Waiting for your suggestion of next steps.
    Thanks for your support.
    Javi

    Hello jdehoyosr
    My answer is still the same.  You would not have been able to factory reset the unit and retain your data without backing up the data first.  I have already clearly explained that the backup and restore feature could have allowed you to backup your settings/configurations to be restored after the factory reset.  You would have still needed to restore your data from the backup after the factory reset regardless if you had used the configuration backup and restore option for your settings.  
    The configuration backup and restore would not have been able to the firmware glitch that you were experiencing.  If would have had a previous backup file, it would only have applied settings that you had previously backed up. Depending on which restore option was picked it could have also wiped your data.  
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Iomega Storcenter The operation couldn't be completed. (OSStatus error 2.)

    Hi - I sure hope someone is able to help?
    I have just purchased an Iomega Storcenter IX2-200 4TB NAS device.
    I have tried to use it as a TimeMachine device but when I select the TimeMachine disk from the preferences panel I receive the error 'The operation couldn’t be completed. (OSStatus error 2.)'
    I have not created any users etc, the device is as it came out of the box. The TimeMachine disk automatically appeared in the Finder when I connected the IX2
    Is there a 'special' userid/pw I should be using for the TimeMachine? When prompted for those details from the TM preferences I use admin/<password> and receive the above error - any other entry results in a message stating that the userid/password info is incorrect.
    I don't want to return it because I see it as a useful device to back up my three Macs.
    If anyone is able to help they will be my friend for life!!
    Kind regards,
    Dave.

    I have an idea this is going to take some working out.
    What IP is the upstairs TC and what IP is the downstairs one?
    Can you ping them both please by name and by IP address?
    Can you manually mount the share you will use for time machine in the iMac upstairs..
    In finder go, connect to server.
    Type in the name AFP://user@TCname
    You will then be asked for the password and it should be able to be stored in the keychain. Then select that for TM.. if TM still carries on, reset it and try again. See A4 here.
    http://pondini.org/TM/Troubleshooting.html
    The double entry and refusing to join the right disk is a Mountain Lion trait.

Maybe you are looking for