Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist

Hi all,
We are trying to implement HR renewal.After installation we got the landing page for ESS and MSS. But when trying to expand chips I am getting below error message
'Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist' in the /iwfnd/error_log transaction.
The chips are are still blank.What could be the issue? Any one has an idea?
Regards,
Jay

Hello,
Are you using a Gateway Hub deployment? Check the setting in the "Assign SAP system Aliases to ODATA Services", and see if the services catalog service to the hub server which has LOCAL as alias and checked the default value.
If so deactivate Default System fiag then test again.
You can check this in SPRO:
Regards,
David

Similar Messages

SSL client default does not exist

Hi,
I had newly installed XI system on one of our server.
when i am creating RFC destination INTEGRATION_DIRECTORY_HMI, i am getting the following error on logon /security tab.
"SSL client default does not exist"
and it is not even permitting to go furthur!
any suggestions will be appreciated highly.
Thanks,
Ravi

Hi Ravi
Check if your SSL provider is running.
Go to visual admin--instanceservernodeservices----SSL provider.Start the SSL service and check for the configuration.
Follow the same steps for the dispatcher node.
Go to visual admin--instancedispatchernodeservices----SSL provider

I enter about.config in my address bar and a page from SearchAssist - Landing appears with this message: "As a courtesy, your ISP provided this page because "about.config" does not exist or is unavailable." How can I reach about.config?

Details in original question above - maybe that's why response was that this question had not been asked before. I use very slow dial-up (DSL not available in my area) and I have a lot of computer problems as a result. So I'm not sure if this is because of my computer or if the page really is no longer available. Last time I reinstalled the OS I was able to access it and make changes (May 13-14). I need to reinstall the OS again but, if I can't access about.config, I won't be able to get the computer back to working the way I want (status bar at bottom of screen, etc.). Is there some other way I can try to access the about.config page?

about''':'''config - with a colon, not a period

SSDT - Using a SharePoint list data feed as source - "column does not exist in the rowset" error

Hey guys!
So, I want to use a SharePoint list data to create a cube/tabular model, in order to make a complex analysis in PPS using MDX.
To create the tabular model, I'm using the SS Data Tools, and importing a feed from the respective SharePoint list (using the _vti_bin/listdata.svcextension and then selecting the list(s) I wanna to import).
Everything looks fine and smooth, I can select and preview the data in the table import wizard, but in the end, when importing, I always get this error IF the table has one or more row of data (if the table is empty, it's ok...) - the <...>
column doesn't exist in the rowset.
(Curiously, when I have the same procedure in PowerPivot for Excel, I have no problems, everything works fine. The problem is that then I get again errors if I try to create a tabular model on SSDT importing a PowerPivot file).
Here's the error:
Had you already tried this in SSDT? Are you experiencing the same trouble?
Best regards, and thanks in advance!
Jorge Mateus
Jorge Mateus

I noticed something else too.
I can't process Tabular Models on both SSDT and SSMS (2012), but I can process Tabular Models created on PowerPivot.
I tried to create a Data Feed connection on PowerPivot, and it was successfully created. However, if restoring the PowerPivot Tabular DB on my SSAS Tabular instance and processing (full) the model through SSMS, it won't work.
Is there anything different on PowerPivot and SSDT related with Partitioning or connections to the data sources?
Regards,
Jorge
Jorge Mateus
Update:
When trying to Restore a PowerPivot file on my SSAS Tabular Server and full process the model:
The operation failed because the source does not contain the requested column. You can fix this problem by updating the column mappings.
More Details:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb' in table 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb'.
The current operation was cancelled because another operation in the transaction failed.
X is the first column of the source table, no matter if I chose others on the PowerPivot table.
When trying to import data from a data feed using SSDT:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_ee6be81f-2235-4113-b404-cfcb20647a38' in table 'X_ee6be81f-2235-4113-b404-cfcb20647a38'.
The current operation was cancelled because another operation in the transaction failed.
X is the first chosen column to import.

0SD_C03 cube contains data that does not exist in PSA

Hi,
We have a problem with data difference in cube and PSA. Firstly we deleted PSA extactly then extracted data from r3 to PSA. PSA has 2 records now. Then we extracted data to cube (0SD_C03) via DTP (using 2LIS_13_VDITM transformation rules). However, the cube contains approximately 300 000 data. Cube contains many records that does not exist in PSA.
Where these data come from?
thanks in advance,

Hi,
In your PSA overview, did you change the date that limits the PSA packages showing?
(middle top of screen) and click refresh?
it might be that you only have deleted the PSA from a certain date onwards.
Success,
Udo

Error creating sdo_pc point cloud: "ORA-02289: sequence does not exist"

Oracle Database 12c Enterprise Edition Release 12.1.0.1.0
I've come across a problem when creating point clouds - every so often I'll get an error about a sequence not existing.
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: DROP SEQUENCE "MDPCS_a_17745$$$"
ORA-29400: data cartridge error
ORA-02289: sequence does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 171
ORA-06512: at "MDSYS.SDO_PC_PKG", line 179
ORA-06512: at line 17
I've got a test case which creates a table where we'll put a sdo_pc, a block table and then a loading XYZ table. We then loop a bunch of times and create a PC for each.
Test case setup:
create table pc_test (
 id integer primary key,
 pc sdo_pc);
create sequence pc_test_id;
create table pc_test_blocks as select * from mdsys.sdo_pc_blk_table;
create table xyz (
 rid number,
 val_d1 number,
 val_d2 number,
 val_d3 number);
insert /*+ append */ into xyz (
 select
 rownum,
 round(dbms_random.value(1,10000),2),
 round(dbms_random.value(1,10000),2),
 round(dbms_random.value(20,50),2)
 from dual
 connect by level <= 1000);
commit;
Run test case:
declare
l_pc sdo_pc;
 l_id pls_integer;
begin
 for i in 1..50 loop
 l_pc := sdo_pc_pkg.init(
 'PC_TEST', 'PC', 'PC_TEST_BLOCKS', 'blk_capacity=500',
 sdo_geometry(2003, 2157, NULL, sdo_elem_info_array(1,1003,3), sdo_ordinate_array(400000, 500000, 800000, 1000000)),
 0.005, 3, null);
 l_id := pc_test_id.nextval;
 dbms_output.put_line('PC_TEST id=' || l_id);
 insert into pc_test (id, pc) values (l_id, l_pc);
 sdo_pc_pkg.create_pc(l_pc, 'XYZ');
 end loop;
end;
Some of the PCs will create, but eventually it'll blow up with
ORA-02289: sequence does not exist
In so far as I can tell, once I call sdo_pc_pkg.create_pc(), Oracle is creating a sequence with a name such as MDPCS_a_1751F$$$. When it is done creating the blocks, it then tries to drop the sequence. However the statement to drop the sequence is wrapped in double quotes - so if the sequence name contained any lowercase letters then it will error out when trying to drop it. The values used between the underscores seem to be hexadecimal - sometimes they're numbers only, sometimes numbers and uppercase letters, sometimes numbers and lowercase letters.
Has anybody else come across this issue?
The issue isn't critical as the PC blocks do seem to be created correctly, so the issues are: (a) my pl/sql block errors out and (b) I'm left with sequences lying around.
For the former I'll catch the exception and ignore it, for the latter I'll just drop the sequences myself afterwards.

I tried the test on 11.2.0.4. On that release I get an error during a rename:
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: RENAME "MDPCI_a_26062$$$" TO "M3_A_26062$$"
ORA-29400: data cartridge error
ORA-04043: object MDPCI_a_26062$$$ does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 157
ORA-06512: at "MDSYS.SDO_PC_PKG", line 74
ORA-06512: at line 17

Extraction error "Target cost version in controlling area does not exists"

Hi Gurus,
I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
Target cost version in controlling area does not exist     KN     147
Target cost version 2 not defined. Check your entry     KV     35
Internal program error ( Order 000010510554 Version 002 )     RM     11
Errors in source system     RSM     340
The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
Thanks & Regards,
Vikas Kr.

You are attempting to display data on a target cost version that does not exist in controlling area.
see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147

Using SSIS 2012 - merge join component to transfer data to destination provided it does not exist

HI Folks,
I have a table - parts_amer and this table exists in source & destination server as well.
CREATE TABLE [dbo].[Parts_AMER](
[ServiceTag] [varchar](30) NOT NULL,
[ComponentID] [decimal](18, 0) NOT NULL,
[PartNumber] [varchar](20) NULL,
[Description] [varchar](400) NULL,
[Qty] [decimal](8, 0) NOT NULL,
[SrcCommodityCod] [varchar](40) NULL,
[PartShortDesc] [varchar](100) NULL,
[SKU] [varchar](30) NULL,
[SourceInsertUpdateDate] [datetime2](7) NOT NULL,
CONSTRAINT [PK_Parts_AMER] PRIMARY KEY CLUSTERED
[ServiceTag] ASC,
[ComponentID] ASC
I need to exec the following query using SSIS components so that only that data ,is transfered,which does not exist at destination -
select source.*
from parts_amer source left join parts_amer destination
on source.ServiceTag = destination.ServiceTag
and source.ComponentID=destination.ComponentID
where destination.ServiceTag is null and destination.ComponentID is null
Question - Can Merge component help with this?
Pl help out.
Thanks.

Hi Rvn_venky2605,
The Merge Join Transformation is used to join two sorted datasets using a FULL, LEFT, or INNER join, hence, not suitable in your scenario. As James mentioned, you can use Lookup Transformation to redirect the not matched records to the destination table.
Another option is to write a T-SQL script that makes use of
Merge statement, and execute the script via Execute SQL Task.
References:
http://oakdome.com/programming/SSIS_Lookup.php
http://www.mssqltips.com/sqlservertip/1511/lookup-and-cache-transforms-in-sql-server-integration-services/
Regards,
Mike Yin
TechNet Community Support

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

Every time I launch Firefox it pops up an error stating "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem."

Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

11.5.10.2 to R12.1.1 upgrade : AutoPatch warning : Product Data File $APPL_TOP/admin/*prod.txt does not exist for product

Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
 Copyright (c) 2002 Oracle Corporation
 Redwood Shores, California, USA
 Oracle Applications AutoPatch
 Version 12.0.0
NOTE: You may not use this utility for custom development
 unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
 <-Feature version in->
Feature Active? APPLTOP Data model Flags
CHECKFILE Yes 1 1 Y N N Y N Y
PREREQ Yes 6 6 Y N N Y N Y
CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
PATCH_TIMING Yes 2 2 Y N N Y N Y
PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
JAVA_WORKER No 1 -1 Y N N Y N N
CODELEVEL No 1 -1 Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code Language Status
US American English Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
 **************** S T A R T O F U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
 ****************** E N D O F U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x 1 appltest dba 231650 Oct 30 2004 applprod.txt
-rwxr-xr-x 1 appltest dba 4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x 1 appltest dba 226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch.

IDoc with incorrect data is expected to fail but it does not

Hi All,
The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
exist. The IDoc is expected to fail and give an error message but has not done so.
We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
Would like to know why the IDoc is not failing when it has incorrect
data.
Thanks & Regards,

Hello,
the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
BR
Rene

ORA-29829: implementation type does not exist

Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
Tim

ORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.

Country implementation 40 does not exist for category IT and type 2001

Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
Bala

After suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future.

ORA-20001: The assignment does not exist at this date.

Hi,
I got the following error when imported employee assigment per Hr_Assignment_Api.update_emp_asg_criteria. Could any one help us?
"ORA-20001: The assignment does not exist at this date.".
Following are information and scripts. By the way, Our instance is R12
RDBMS : 11.2.0.1.0
Oracle Applications : 12.1.2
lp_object_version_number ->7
effective_start_date ->29-OCT-10
effective_end_date -> 31-DEC-12
ln_effective_date = > effective_start_date
=========================
apps.Hr_Assignment_Api.update_emp_asg_criteria
(p_validate => False,
p_effective_date => ln_effective_date, -- l_date,
p_datetrack_update_mode => lv_update_mode, --'CORRECTION',
p_assignment_id => ln_assignment_id,
p_object_version_number => lp_object_version_number,
p_organization_id => '0', --'Business Group' c_emp.organization
p_location_id => '1242', -- 'default ccid',
p_job_id => '64', -- This is job 'MANAGER ->64' to test in OFADEV.,
-- p_position_id => v_emp.std_position_id,
p_special_ceiling_step_id => lp_special_ceiling_step_id,
p_effective_start_date => ln_effective_date,
--per_effective_start_date,
p_effective_end_date => lp_effective_end_date, --IN/OUT
p_people_group_id => lp_people_group_id, --IN/OUT
p_group_name => lp_group_name, --IN/OUT
p_org_now_no_manager_warning => lp_org_now_no_manager_warning, --IN/OUT
p_other_manager_warning => lp_other_manager_warning, --IN/OUT
p_spp_delete_warning => lp_spp_delete_warning, --IN/OUT
p_entries_changed_warning => lp_entries_changed_warning, --IN/OUT
p_tax_district_changed_warning => lp_tax_district_chang_warning --IN/OUT
);

966933 wrote:
How do I find the reference you posted?MOS website -- https://support.oracle.com
You need to have a valid CSI number and valid username/password to access MOS website.
Thanks,
Hussein

Data Provider implementation '/IWFND/OM_MGW_NOTIF_0001_UC' '01' 'DEFAULT' does not exist

Similar Messages

Maybe you are looking for