Data push from BW to Analysis system

Hi,
I have a requirement to push data from BW to analysis system(client is using this for present reporting) which runs on SQL server.Both data bases are on MS-SQL.I have a cube and using infospoke,can i push the data into the Analysis system? and how?.How can i move dimensions of a cube?.Please advice.Thanks.
Ravi.

Jothi,
I would suggest you to read this link of help as it describes exactly what you want to acheive.
http://help.sap.com/saphelp_nw04/helpdata/en/6e/86833ceb3d062de10000000a114027/content.htm
In case of further queries please let me know.
I am sorry I won't be able to answer exactly the use of SMOBILEBW.
Thanks
Sumit

Similar Messages

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

Error is data loading from 3rd party source system with DBCONNECT

Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started                                                                                00           516          S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S
27.10.2009 12:14:24 Job finished                                                                                00           517          S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
Rajib

There will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh

Re: Data Extraction from Multik R/3 systems into one Infosouce

Hi Experts,
In my current project there is a requirement to bring data from two different R/3 clients(systems) into one BW sytem.
The inforsouce is the same. For example The FI GL data needs to upload into BW through the Infosource 0FI_GL_4 from two different R/3 clients ; 100 and 150. Is it possible?
Curreny set up is to bring data only from R/3 system 100. Now the requirement change and have to bring data from R/3 system 150. This is the situation in production client.
Please advise and share your view.
Thanks in advance

Luis:
Thanks for the response.
In both R/3 clients Data Source is 0FI_GL_4. The infosource is 0FI_GL_4. I am loading data into FIGL ODS. Are 0GN_R3_SSY and 0LOG_SYS_BE two infoobjects to be included into the FIGL ODS?
Another question - The data source for one client is in the revised mode in BW production client. Can I install the data source in the BW production client by generating transfer rule/transfer structure? Or do I need to transport it from the R/3 client and replicate it in BW?
Please respond.
Thanks

Encrypt data send from a non-SAP system to ECC.

Hi,
We are tryign to encrypt the credit card details send from web (non-sap system) via a xml file to ECC.
From Basis side, I have exported the public key from the ECC for the web server to encrypt the CC details while sending via xml.
The external web consultants encrypted the cc detail with the public key and send it via xml but that was not able to decrypt at the ECC side.
The developers were using the FM 'CCARD_DEVELOPE'at ECC to decrypt the data in the xml file. It was saying SSF error: No data transfered.
Meanwhile SAP CryptoLib is installed and credit card encryption/decryption is working fine for CC details entered via GUI interface.
Is there anything I am missing out here to encrypt CC details send from a Non-SAP system to ECC.? Do we need to load the SAP cryptolib in the non-SAP system to ecrypt this data at the senders end. Or is there a alternate solution for this ?
We are in ECC6.0/RHEL/Oracle10204.
Appreciate your help.
Thanks

Hi Nelis,
Thanks for your reply.
This note does not get any information regarding encrypting data from a non-SAP system to SAp system.
I am looking setup/information for encrypting data from a non-SAP system to SAP system.
Thanks

Data Transfer from 4.7 version system to 6.0 version system

Hello Experts ,
We have our FICO system is on 4.7 version. But our HR System is on 6.0 version. FICO (4.7) system is old one with all data. And HR (6.0) is being newly implemented....
We need some data from FI (4.7) system to HR (6.0) . In future if any changes happens in FI (4.7) system the same changes need to be done in HR (6.0) system too . For ex : If currency of particular country changed..Then as FI is imp we will make that chnage in FI box..We want to reflect the same change in HR box as well.....
We found 2 ways for this :
!) doing manually
2) Doing either by transporting or using ALE /IDoc method
We want to investigate ways to perform the same using 2 way as this is very simple. But we have doubts here... As HR is on 6.0 and FI is on 4.7 ..... Can we transport data using transports ??? (between2 different versions /??)
If transports are not done , then we do that using ALE/ IDocs? using IDoc's we gerenally send transctional data... This configuration settings comes under master data ... can we send this master data using ALE/ IDoc or LSMW..If yes suggest us the msg types ...or other needed info,.
Thanks in advance. Reward points are garunteed...

Hello Sampath,
Yes, distribution of master data via ALE should be OK between these two systems, no problems whatsoever.
You can use message type COSMAS to distribute cost centres for example which is necessary and is most common change scenario for both HR and FI systems. For all other message types see list of Message Types under transaction (Area Menu) WEDI.
I think ALE should be the correct approach given your scenario.
Hope this helps,
Cheers,
Sougata.

Error in RBDMIDOC report run in E-REC, for data transfer from HR to EREC system

Hi,
We are on EHP5, EREC 605, SP0007. EREC is on a standalone, separate instance. HR in a separate instance.
We have created new org.units & positions, which we are trying to move from HR to EREC system for starting the EREC process.
In the report message type, gave input "HRMD_ABA", The output throws this error. (Screenshot attached)
Please provide your helps on the reasons for the error and corrective action to be taken.
Regards,
ER.

Thank Nicole for the reply.
Just extending my query,
I have created newly 2 org.units & 2 positions under the org.units in HR system.I
If i want to create a requisition as a recruiter from EREC portal, for that newly created vacant positions, what needs to be done?
How to move that new vacant org.unit with position to EREC system ?
Should I run the org.unit with positions using PFAL (Insert/update mode) or use RBDMIDOC method ?
Look for inputs.
Regards,
ER.

Change data capture from DRM to Target system

Hi All,
I have a situation where client wants Hyperion DRM to be single source of truth and pass Hierarchy information from DRM to subscribing target systems. There are 3 target systems and the database is MS SQL server.
Now in the export profile ,I am using database export where I have mapped the DRM node/properties to target table's columns. For the initial load it is a new record in the database and the data flows as it is a 1:1 mapping, however if few of the property value changes and I wan to update only the corresponding columns what will the architecture for push the change data in to target.
Can we achieve this without have any staging tables and capture the change data ?
Do need to use ODI ?
Does DRM has any work around without putting extra effort hrs by building CDC tables ?
I will really appreciate your suggestions and comments on this......

Thanks for the quick reply. However I was trying to resolve the Change data capture in Hierarcy through as" Database Table" but it seems when we choose the DEVICE option as database in the target tab of export it can only export or insert new records into the tables but cannot update and existing record.
PLease correct me if my understnding is wrong ?????

Purchase Order Data transfer from one old sap system to new sap system

hi all,
Suppose i have created some purchase orders in one client( old sytem) that are accurate according to our need .
Now instead of creating same purchase orders again in in new system is a useless task.
SO i want to upload these purchase order directly from SAP old system to
SAP new system.
How to execute this task.
CAN anybody help me out with simple example plz..
thnx & rgds

using ALE & IDOCS you can trasfer data from one system to another

Data Flow from SAP Source (ECC) system to SAP BI system

Hi All,
I wanted to know how data will be flown from SAP Source system to SAP BI system.Data flow should include
1) Data will be flown by using the IDOCs?
2) What all are the interfaces involved while data is transferring?
3) What will happen exactly, if you execute the PSA?.
If you have any info on this, could you please post here....I
Regards,
K.Krishna Chaitanya.

Hi Krishna,
Please go through this article :
"http://www.trinay.com/C6747810-561C-4ED6-B85C-8F32CF901602/FinalDownload/DownloadId-C2EB7035A229BFC0BB16C09174241DC8/C6747810-561C-4ED6-B85C-8F32CF901602/SAP%20BW%20Extraction.pdf".
Hope this answers all the mentioned questions.
Regards,
Sarika

Data transfer from EBP to external systems

Hello everyone....am in a tizzy regarding BAPI's and IDOC's.Can someone clear my doubts please??
Interface concept of R/3 is based on two strategies--RFC and IDocs.
1.]When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred by/as a BAPI??
2.]And ALE mechanism is used to transfer IDOCs.Doesn't the ALE use RFC destination to distribute documents?Then why isn't IDOC/ALE referred to RFC like a BAPI?
3.]Is this statement correct:loosely coupled applications(MM,SD,PP etc) are tightly integrated because of ALE??Is the integration of various modules due to ALE or a central Database or both??
4.]Can a BAPI be used to communicate with non R/3 systems say send a PO to the vendor?
5.]Where does XI feature in all the above??
Thanks
Priya

Hi Priya,
A lot of questions, but there are not specific to SRM, General to all SAP Components. Let me try to answer what i can and know.
1. When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred by/as a BAPI??
Yes. PO is transferred by/as a BAPI.
2. ALE use RFC destination to distribute documents. There are two kind of ALE Processes.
a. Synchronous - Use RFCs or BAPIs.
b. Asynchronous - IDocs
Since ALE use RFC destination, it does not mean they use BAPI.
RFC destination is Remote System you want to reach.
What you use to carry the data that you decide is it a IDoc or RFC or BAPI.
How do you want the response from Remote System that you decide by Synchronous or Asynchronous.
3. Is this statement correct:loosely coupled applications(MM,SD,PP etc) are tightly integrated because of ALE??
No
Is the integration of various modules due to ALE or a central Database or both?? They are thru Integration touch points thru program logic in the back.
4. Can a BAPI be used to communicate with non R/3 systems say send a PO to the vendor.
Yes.
5. Where does XI feature in all the above.
XI is mapper, translator with Business Partner Network(BPN),EAI tool.
One Simple Ex.:
Your PO should turn into Sales Order into Vendor SAP system, then Vendor can do their backend ERP process using that Sales Order. Vendor can send Acknowledgement, Confirmation and Invoice from their system, inturn will be translated into your system on your PO.
XI sit between any systems and works. It uses XML as communication language.
Thanks,
Jay

Data transfer from bw to another system usaing BAPI

hi friends,
ple explaing me how can i migrate data from bw to another sap-system or non-sap system usaing bapi.
i have some idea bat bapi like steps for function modules . i dont have idea for bw.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
and what abt badis for infospoke.
Thanking u
suneel.

hi friends,
ple explaing me how can i migrate data from bw to another sap-system or non-sap system usaing bapi.
i have some idea bat bapi like steps for function modules . i dont have idea for bw.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
and what abt badis for infospoke.
Thanking u
suneel.

Data migration from one DEV(DE1) system to other DEV(DE2) BW system using client copy or client export import

HI SAP Gurus,
Please find the below details:
SAP NetWeaver 7.3
We have to copy all customized or developed BW objects like master data, DSO's , Infocubes , Reports etc.
We need only the design changes but not the data within the DSO or cubes that exist .
We have tried below procedure:
1) Taken export of DE1 source client 400 with profile SAP_CUST
2) Imported transports generated for above export into DE2 target client 350.
3) Executed transaction SCC3 and performed post processing, post processing was successful . Still we are not able to see DSO's, infocubes ,reports.
Please lets us know what we need to do to fulfill our requirement.
Thanks,
Avadhesh
+ 91 8095226536

Hi Basis,
Please refer to below documentation on how to perform system copy in BI systems
How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
Post processing steps for SAP BW system copy or db copy
BI systems has mostly cross client objects. So client copy with SAP_CUST profile will not serve your purpose.
Hope this helps.
Regards,
Deepak Kori

Deleted data records from R3 to BW system

Hi Friends,
We are using standard Extractors in BW system and data loads are running daily.
Now IF we delete some Sales Orders, Billings and Deliveries permanently in R3 data base (not just deletion flag) which already loaded in to BW system in previous data loads.
So, After next BW data load, Is BW data = Equal to R3 system or not? that means whether these documents are deleted in BW system too..or not?
Please advice..
Tony

Hi Shiva,
    There is no need to delete any data incase you have a deletion flag (If the record is deleted in R/3) or a canceled flag(If the record is cancelled). You can use this flag to control your values of your key figures. What usually happens with standard SAP extractors is that when a document is cancelled or deleted, the extractor usually negates the value of the KF. So when this deleted or cancelled data gets loaded into BW, the values of the KFs cancel each other.
Eg PO   Cancel flag/Delete flag      Quanity
    1                      _                          10
    1                      X                         -10
Hope this helps,
Regards.

Data transport from development too production system

Hi, friends
I created a house bank in development sever now i want to transport it in to production server so how can i transport it , please anyone give the solution urgently with screen shot
my id is goutam.jena at genus.in
thnxs
goutam kumar

In the screen FI12 if you have filled all the relevant data, the system should propose teh request on its own. If you have missed and clubbed this in any other transport request, then you need to generate transport.
Fropm the Table view Menu select Transport. This will give you first transport request creation option and then you select the entries that you want to transport and then press button " Include in Transport".
Save entries and trans port.

Data push from BW to Analysis system

Similar Messages

Maybe you are looking for