Data Quality Comparison Report across Systems(MDM and BW)
Hi,
I have a requirement of generating a Data comparison report in Excel using BODS. I need to extract data from SAP MDM and SAP BW and do a comparison on the record basis. For example.I take a material 100 record from MDM and same Material 100 record from SAP BW. I have to compare field by field values between these 2 systems.If there is any contingency,I have provide that record as output in Excel.
I think i need to create a batch job in BODS to run this requirement. Could you please tell me the approach of comparing the records in BODS and give the output of the record in Excel.
I really appreciate your help.
Thanks,
Kumar.
Hi,
The steps are :
To read data from BW need to create a open hub detination based on the datatarget where the data is stored.
Read the MDM data to BODS and then in BODS.
Once both the data from BW and MDM are sotred in BODS then create a pioneer report which is based on excel.
Similar Messages
-
This Forum does not report correct system info and thinks I am still using v3.6.x
Visiting the Forums the sidebar info is incorrect. For example I am advised:
System Details
Windows XP
Firefox 3.6.16
Wrong!!
I am using Vista and Firefox 4.0
On this page the info is correct.
These silly inconsistencies suggest that this version has been inadequately tested.
Upgraded and now bitterly regret it! This info is wrong; the Google search bar no longer works correctly - beginning to lose confidence in the browser!When visiting forums the 'System details' are the details of the user that posted the question, not your system details. For example look at the System details on this page, it correctly identified you as Fx 4.0 on Vista.
-
R12 Interface table for loading data from 3rd part payroll system
Hi All,
Can anyone help me to have a lists and detailed technical information of available interface table on Oracle R12 for importing/loading data from third party payroll system. And what should be the best way of importing the data? It should be load first to AP then to GL or load it directly to GL?
Any help much appreciated. Thanks.
CyrusHi Cyrus,
Can you please let us know your business requirements of this integration, i.e what business want to acheive out of this integration.
It depends on what your business requirements are wether to send only accounting information from payroll system to your Oracle GL ( then you can integrate Payroll system to Oracle GL directly, by sending the accounting information from your payroll) or if your requirement is to create payroll related invoices in AP and then do payments in oracle AP and then pass accounting information to GL ( then integrate your payroll to AP)
Regards,
Madhav -
DQS matching data quality project finished but stuck on Matching - Export screen
Attempt to open the data quality project again results in the export process screen. Back and Next are greyed out. i.e. not possible to run the matching project again.
to repeat;
New data quality project
Map - 7 mappings applied
Matching - overlapping clusters
Export - selected matching results to export, Click Export. Success. Click "Finish" (Next is greyed out)
Attempt to open the project again. back on the export screen ahain
DQP is in State: in Work, Locked: False, Contains unpublished content: True
Data Quality Services Client : 11.0.3401.0
Data Quality Services Server : 11.0.3401.0
any ideas?Have spent some time battling the UI.. As a workaround,
never click Finish. You will then be able to re-run the match process with updated results over and over.
Note: If at any time you click Finish the data quality project will be "stuck" again and you will have to create a new one to have updated match results. -
Question on How to Use LI and NP Data Comparison Report
Hi,
We are trying to figure out how to make the Transaction Code PC00_M42_LLPD (LI and NP Data Comparison Report) work. What file type (.xls, .txt, etc) should be used? Anyone who is familiar with the transaction, please help.
Best Regards,
BrySomewhere in the Oracle 8.0 documentation it is stated that one
enviroment per each thread is required if I want to ensure
complete concurrency of different threads accessing databases.
But isn't this a waste of resources since only Handle Alloc &
Free functions use Enviroment handle, hence they should be
mutexed for access from concurrent threads.
But the most time-consuming functions are ServerAttach &
SessionBegin which shouldn't be mutexed since they have each
their own Server/Session handle.
So my question is if a single OCI Enviroment is enough for the
most demanding tasks or should I create one enviroment per
thread?
Most folks are happy with a single environment. The mutex on the
env handle is only taken when the OCI library is allocating some
memory for internal operations.
Tomislav. -
Scheduling a report with System Date as prompt
Hi Experts,
We have came across a requirement where users want to have a date prompt.
While scheduling the report, by default prompt is to be populated with system date and it (prompt) should also allow us to select a different date.
This report is used for regular run and also for scheduling.
We need a single report with single prompt which allows us to run for any random date when prompted and also to be scheduled for the latest date.
Please give us advice/ suggestion.
Thanks
UttamHi Neil,
We have tried both the approaches given by you, but it is not working for my requirement.
Let me explain it with the below scenario.
scenario:
we have developed the report by using 2 data providers,
Dp1: It is a custom Query with date as follows ( it is a Transaction data) which brings the data from 1st day of month(user prompt) to user's prompt date.
TRANSACTION_DATE BETWEEN last_day(ADD_MoNTHS(@Prompt('As Of Date :','DT','ABC\plant\Transaction Date',Mono,Free,Persistent,,User:0)
Dp2: It is also Custom Query, but it has only data on month ends.
DIMV_plant_EOP.TRANS_END_OF_MONTH_DATE = last_day(ADD_MoNTHS(@Prompt('As Of Date :','DT','ABC\plant\EOP plant Attributes\EOP Date',Mono,Free,Persistent,,User:0),-1))
Report is having 3 prompts, namely
1) As of date (prompt)
2) Plant (prompt)
3) Country (Prompt)
For example: if my report is ran on 06-june-2014,
DP1: Brings the data from 1st of June to 6th of june.
DP2: Brings the Data from Inception to last month(say 30-may-2014) because it has only month end data.
Upto this it is fine.... but
My requirement is to schedule the report daily......
Example: User want to schedule a report today(10-July-2014), tomorrow(11-July-2014) and so on...
Scheduling should be done daily i.e, it has to fetch the data 10-Jul-2014, 11-july-2014,12-july-2014.... so on.
Automatically scheduling has to take the current date.
Thanks,.. -
Data Quality Services - Summary report
Hi,
Is anyone has a idea about which table is stored summary information comming out from Activity monitor?
the example is below:
when I exported the data the summary as follows:
My pourpose is to automate this report if it is stored on DQS data bases?
Field
Domain
Corrected Values
Suggested Values
Completeness
Accuracy
EmployeeName
EmpName
5 (0.06%)
0 (0%)
7303 (88.73%)
8222 (99.89%)
EmployeeKey
EmployeeKey
1 (0.01%)
0 (0%)
8231 (100%)
8215 (99.81%)
CostCentreKey
CostCentreKey
0 (0%)
0 (0%)
8231 (100%)
8141 (98.91%)
CostGroupKey
CostCentreGroupKey
0 (0%)
0 (0%)
7188 (87.33%)
7094 (86.19%)
LeaveGroupKey
LeaveGroupKey
0 (0%)
0 (0%)
8231 (100%)
8129 (98.76%)
EmployeeStatusKey
EmployeeStatusKey
0 (0%)
0 (0%)
8231 (100%)
8212 (99.77%)
EmployeePositionNumber
EmployeePositionNumber
0 (0%)
0 (0%)
8214 (99.79%)
8117 (98.61%)
EmployeeEmail
EmployeeEmail
0 (0%)
0 (0%)
5133 (62.36%)
8220 (99.87%)
HoursPerWeek
HoursPerWeek
0 (0%)
0 (0%)
8214 (99.79%)
8213 (99.78%)
Gender
Gender
0 (0%)
0 (0%)
8231 (100%)
8231 (100%)
EmployeeEFT
EmployeeEFT
0 (0%)
0 (0%)
8214 (99.79%)
8213 (99.78%)
EmployeePostCode
EmployeePostCode
0 (0%)
0 (0%)
8153 (99.05%)
8124 (98.7%)
EmployeeSuburb
EmployeeSuburb
133 (1.62%)
0 (0%)
8152 (99.04%)
8134 (98.82%)
ReportToManager
ReportToManager
0 (0%)
0 (0%)
7037 (85.49%)
7036 (85.48%)
PositionClassificationCode
PositionClassificationCode
0 (0%)
0 (0%)
8144 (98.94%)
8144 (98.94%)
PositionClassificationDesc
PositionClassificationDesc
0 (0%)
0 (0%)
8144 (98.94%)
8144 (98.94%)
PositionLocation
PositionLocation
0 (0%)
0 (0%)
8214 (99.79%)
8122 (98.68%)
Age
Age
0 (0%)
0 (0%)
8231 (100%)
8229 (99.98%)
CurrentClassCode
CurrentClassCode
0 (0%)
0 (0%)
7908 (96.08%)
7906 (96.05%)
CurrentCLassDescription
CurrentCLassDescription
0 (0%)
0 (0%)
7908 (96.08%)
7907 (96.06%)
EmpState
EmpState
0 (0%)
0 (0%)
8153 (99.05%)
8137 (98.86%)0
Hi All,
I have utilized the DQS for my organization Data Cleansing project. And we have built Data Quality reports using DQ output.
We also use Profiler Summary report in the Activity Monitor, but this is manual process where Data owners need to manually enter into the Activity monitor and generet the porofiler report.
My question is, which DQS table store the this Profiler summary report where by I can automate the report through that source.
Here is the screenshot of the report we are looking at, we need to find out which DQS source table got this information.
Thanks for the help -
In DS 12.1.1.0,
when I try to open a Data Quality Report in the Management Console I get a new Windows with the following error message:
Fehler
Fehler bei der Seitenformatierung: FormulaFunction hat eine unerwartete Ausnahme von der 'evaluate'-Methode ausgelöst.
Tomcat log stdout says:
19-05-09 10:58:59:708 - {ERROR} sdk.JRCCommunicationAdapter Thread [http-28080-Processor24]; JRCAgent5 detected an exception: Fehler bei der Seitenformatierung: FormulaFunction hat eine unerwartete Ausnahme von der 'evaluate'-Methode ausgelöst.
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.ac.a(Unknown Source)
at com.crystaldecisions.report.web.event.b2.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
at org.apache.jsp.jsp.dqcrystalviewer_jsp._jspService(dqcrystalviewer_jsp.java:274)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at com.acta.webapp.mdreport.servlet.JSFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
Any idea how this can happen?
Regards,
Martin
Edited by: Martin Bernhardt on May 19, 2009 11:03 AMMartin,
can you try to change the Settings of your Internet Explorer:
Tools --> Internet Options --> General/Appearance/Languages
Add "English (United States) [en-US]" and move it to first place above the "German (Germany) [de]" entry?
Niels -
Data quality report under management consol
I am using BO DS 4. and trying to use the data quality report under management consol. For me these reports are getting generated for every run of the address cleanse Job.
Is it possible to get a consolidated report for a day of the Job rather then for each run? If yes, please let me know how I can do that.Please respond, If any body has any clue on this
-
Data Services and Data Quality Recommnded Install process
Hi Experts,
I have a few questions. We have some groups that have requested Data Quality be implemented along with another request for Data Services to be implemented. I've seen the requested for Data Services to be installed on the desktop, but from what I've read, it appears to be best to install this on the server side to allow for more of a central benefit to all.
My questions are:
1. Can Data Services (Server) install X.1 3.2 be installed on the same server as X.I 3.1 SP3 Enterprise?
2. Is the Data Services (CLIENT) Version dependent on if the Data Services (Server) install is completed? Basically can the u201CData Services Designeru201D be used without the Server install?
3. Do we require a new License key for this or can I use the Enterprise Server license key?
4. At this time we are not using this to move data in and out of SAP, just using this to read data that is coming from SAP.
From what I read, DATA Services comes with the SAP BusinessObjects Data Integrator or SAP BusinessObjects Data Quality Management solutions. Right now it's seems we dont have a need for the SAP Connection supplement, but definetly something we would implement in the near future. What would be the recommended architecture? A new Server with tomcat and cmc (seperate from our current BOBJ Enterprise servers)? or can DataServices be installed on the same?
Thank you,
TeresaHi Teresa.
Hope you are referring to BOE 3.1 (Business Objects Enterprise) and BODS (Business Objects Data Services) installation on the same server machine.
Am not an expert on BODS installation.
But this is my observation :
We had recently tested on a test machine BOE BOXI 3.1 SP3 (full build) installation before upgrade of our BOE system.
We also have BODS in our environment.
Which we also wanted to check whether we could keep on the same server.
So on this test machine, which already has BOXI 3.1 SP3 build, when i installed BODS server installation,
what we observed was that,
all the menus of BOE went away
and only menus of BODS were seen.
May be BODS installation overwrites/ or uninstalls BOE, if it already exists ?
I dont know. Though i could not fine any documentation, saying that we cannot have BODS and BOE on the same server machine. But this is what we observed.
So we have kept BODS and BOE on 2 different machines running independently and we do not see any problem.
Cheers
indu -
Fetching the sales order data using both system status and user status
Hi,
Could any one tell me how to fetch sales orders using both system status and user status.
My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
Early replies are appreciated.
Thanks
TanveerHi,
The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
Regards,
Dipesh. -
Customer Aging Report VT Label Exclusion and Modification of Date Format
Hi Folks!
I need your thoughts on how to remove the 'VT' label in all amounts of the Customer Receivables Aging Report.... Since it is a system variable, and already have the VT label when it is called, any remedy on how to remove this?
In line with this also,
We would like to modify the date format of the Aging Dates at the Header of the Table of the Report. The system returns the date format YYYY-MM-DD. We would like to change it to DD-MM-YYYY. I used the Concat and date functions provided in the Formula in PLD... but it returns mismatch error.
I have searched through the forum and find no answers with this. I know that this will help also other users with the same concerns.
Thanks a lot.
FringeSkype was causing the problem :@
-
Deliver a report in XML format and save it to local file system on the server
We have OBIEE 10.1.3.4 on Redhat linux. We want to have generate a report in XML format and saved it to the server's file system. Did not realize this is s difficult task. Basically
1) How to create a XML report? It is not listed in the output items of a layout template.
2) How to deliver XML the report to local file system. Look into the Delivery section of Admin page. FTP should be the best choice, but does that means that one need to install and run ftp server on the BI server box?
ThanksHi,
Since I still have problems on this subject, I would like to share on how it progresses.
Currently I have a problem of timeout in step "Truncate XML Schema" with the URL that I mentioned above.
The exact error is the following : 7000 : null : com.sunopsis.sql.l: Oracle Data Integrator TimeOut : connection with URL [...]
The connection test is still OK.
I tried to increase the value in the user's pref but there's no change. -
EWA Report with yellow rating and NO data
Hi,
We have upgraded the solution manager to EHP1 in June. Befor that my EWA was working perfectly fine.
Our EWA report (after upgrade) is getting generated and has a rating yellow but it contains No data.......shows data oly for hardware capacity even no other performance factors included in the report.
I checked settings in satellite system as well as in solution manager. everthing is working fine. All RFCs, service defination, word setting everthing is fine.
I need your assistance to resolve this issue o priority as its EWA for PRD isnt getting generated.
Thanks,
SAP Basismy ewa contains:-
1.2 J2EE Configuration Data
1.2.1 Support Package Maintenance
No configuration data was found.
Recommendation:
Check whether data is displayed for this system in application 'Change Reporting', which can be found in the 'Root Cause Analysis' work center under 'System Analysis'.
The requirements for 'Change reporting' are:
- Setup of Diagnostics
- Setup wizard for this system has been executed successfully
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
2 Java Performance Data PI1
2.1 Java Application Performance
No performance data was found.
Recommendation:
Check whether data is displayed for this system in application 'Workload Analysis', which can be found in the 'Root Cause Analysis' work center under 'End To End Analysis'. If the data is not available here, open a message on component SV-SMG-DIA.
If data can be displayed in the Workload Analysis but is missing here, open a message on SV-SMG-SER.
The requirements for the 'Workload Analysis' are:
- Setup of Diagnostics including BI
- Setup wizard for this system has been executed successfully
- Agents have been set up and are running
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
please suggest -
System date format in reports (winnt)
Hello All,
I am using oracle report bulder 6.0.5.35. on winnt
i have to show all the date fields in my report in the system format (as specified in the regional settings in control panel)
i couldn't find a direct solution, so what i did was to create a user defined parameter and pass the system date format as a string to the report at runtime (this report is invoked from VC++, so i can pass the local setting as a string at runtime)
after this, in BEFORE REPORT trigger i use the following code
dbms_session.set_nls('nls_date_format',:dat);
--where dat is the user parameter.
shouldn't this change the date format for the current session. but this is not happening. (i have not set date formats for any date fields in report)
i am not getting the output in format that i passed, but always i am getting in 'dd-mon-yy' format.
can anybody please help. is there any other solution.
thanks and regards,
Pinto.
nullhello,
the DBMS_SESSION changes the settings on the database side. as reports has it's own client-side NLS settings this does not have any influence on the output.
the client-side settings are defined by the NLS_LANG settings in the registry on the client.
regards,
the oracle reports team
Maybe you are looking for
-
I used a template and modified it it's 2 pages. I can't add a third page. I found no documentation re adding a page so I assumed that if text flowed beyond the second page a third page would be added. I even pushed a picture into the non-existent thi
-
Issue with At selection-screen output
Hi, I tried in SDn to find suitable thread atlast i am creating query here. My requirement is: i have two radiobuttons. when i click first radiobutton it hasto show one selection screen it contains pernr and bukrs when i click second radiobutton it
-
Automize SQL TRACE for a selected session
Hi, Should I automize the process of SQL Tracing for a particular session of our choice? Lets say when there are several sessions, and we want to select the particular session for SQL TRACING, then the SQL tracing for that session enable via running
-
Interactive scripts in CRM 4.0
Hi All, I am working in CRM 4.0. I created a interactive script in interactive script editor ( BSP CRM_IC_ISE). I could not see any buttons to create a transport request in the toolbar in script editor. I can see the button to download the script. Fo
-
Sequence number over multiple adobe form calls
Dear all I posted this question in another subforum - http://forums.sdn.sap.com/thread.jspa?threadID=1997461 - three days ago, but nobody could answer, so I try to post it here. We would like to have a sequence number for each page. The Adobe Form ge