Data Reading Capture Error - what's up with this?

I know a few others have posted about this, but I have not seen an explanation.
My stats: 10.4.2 (yes, I'm going to get 10.4.3 - I will eat my pants if that has anything to do with this), FCP 5.0.3, G4 1.5GHz Pbook, LaCie 250GB external firewire drive for capture (TONS of space), Sony GV D300 capture deck, footage shot on the Panasonic DVX100 24p camera. The tapes are non-dropframe.
The error reads: Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. To capture as much of your footage as possible, please log and capture a clip that ends before this segment, and another one that starts right after it.
This sounds to me suspiciously like Apple programmers punting on a known bug just prior to release, rather than something ACTUALLY wrong with my tapes, my computer, my connections, my drives or my deck.
The reason I say this is that I have just started a new project and am capturing five tapes of footage. I am on tape 4. I had no problem capturing from two of the 4 tapes so far - so my cables, deck, drive and software are fine.
On the 2 tapes that have given me problems, there is also discontinuous timecode. This is the DP's fault. However: the capture error is NOT occurring in places on the tape where the TC breaks (or skips, rather). THAT problem is simply causing the usual errors and requiring careful logging.
Instead, I get the error in question for clips that appear to be fine in terms of TC. When I get the capture error, I have actually been able to do 2 Capture Nows, but instead of capturing on both sides of the problem area ("this segment" in the error message parlance), I have been able to capture ALL OF THE TIMECODE in 2 clips. That is, when the capture fails and kicks out a mini clip (up to the point where the capture snagged), I can start a Capture Now from one frame after the last TC in the mini clip and Capture from there to the end.
So that suggests to me that there is nothing wrong with my tapes, either. To me, this is conclusive evidence of a pure software error.
I am wondering, therefore, if there is anyone from Apple monitoring these boards who can tell me what is ACTUALLY happening here and what to do, because it's very frustrating.
Thanks,
Nathan Jongewaard

My suggestion is that you reconsider whether your in Non-Drop frame. NTSC standard is Dropframe 29.97. I'm afraid you may have this backwards. DVX100's default to dropframe (29.97fps) in the USA. FCP could be encountering a pulldown cadence every few minutes because it expects a frame drop that is not there.
Remember the frame drop only occurs every few minutes so this makes sense. With standard NTSC capture (not 24fps pulldown removal) such dropped frames don't mess anything up. They just subtly shift the timing and sync of the audio track. You could have captured this way for years and rarely seen a problem with short clips. When doing a pulldown removal, a missing or in your case extra frame can confuse the pulldown removal system as it expects to find the video encoded in 29.97 rather than 30fps.

Similar Messages

ITunes 10 crashes on attempting to enter iTunes store. Still running Leopard 10.5.8. What's up with this?

iTunes 10 crashes upon entering iTunes store, returning the error:
What's up with this?

Download Firefox or another browser, make sure it's working.
Download the free OxyX here
http://www.titanium.free.fr/
Remove Safari and Trash it.
Use OnyX and run ALL the maintenance and cleaning aspects reboot.
Use OnyX Verify Preferences and write down any corrupt .plists for deletion (they will rebuild themselves after a reboot or program launch)
Now visit Apple in Firefox and download Safari install, reboot.
http://www.apple.com/safari/
Visit this page to check the status of your browser plugins
https://www.mozilla.com/en-US/plugincheck/
Install flash here if you don't have it
http://get.adobe.com/flashplayer/

"No headers or footer ware added because Acrobat encountered an unidentified error." in adobe professional 6.0, what to do with this error?

"No headers or footer ware added because Acrobat encountered an unidentified error." in adobe professional 6.0, what to do with this error?

My suggestion is that you reconsider whether your in Non-Drop frame. NTSC standard is Dropframe 29.97. I'm afraid you may have this backwards. DVX100's default to dropframe (29.97fps) in the USA. FCP could be encountering a pulldown cadence every few minutes because it expects a frame drop that is not there.
Remember the frame drop only occurs every few minutes so this makes sense. With standard NTSC capture (not 24fps pulldown removal) such dropped frames don't mess anything up. They just subtly shift the timing and sync of the audio track. You could have captured this way for years and rarely seen a problem with short clips. When doing a pulldown removal, a missing or in your case extra frame can confuse the pulldown removal system as it expects to find the video encoded in 29.97 rather than 30fps.

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

New IMac is crashing randomly because of "Panic Kernel Error." Now IMac startup disk is not visible and will not mount. What the story with this machine. Running 10.6.7

New IMac is crashing randomly because of "Panic Kernel Error." Now IMac startup disk is not visible and will not mount. What the story with this machine. Running 10.6.7

Almost certainly, some sort of hardware problem on your logic board.
Make an appointment and take it to your local Apple Store: http://www.apple.com/retail/geniusbar/

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

After downloading the latest iTunes update, when I open Outlook on my pc, I am getting an error meaasage that MoblieMe has encountered a problem and needs to close. What's up with this?

After downloading the latest iTunes update, when I open Outlook on my pc, I am getting an error message that MobileMe has encountered a problem and needs to close. What's up with this?

You're welcome.
tt2

Fox opens an error (Problem opening page) page when ever I open a new fox window and parks it in upper left corner of my desktop, what is up with this ??

Fox opens an error (Problem opening page) page when ever I open a new fox window and parks it in upper left corner of my desktop, what is up with this ??
It slows down my surfing, a lot and I do not notice the error page, until I notice the slow speed, because it is as small as a page can be, showing only the " -, +, & full size boxes with a border"

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I can't figure out what's wrong with this code

First i want this program to allow me to enter a number with the EasyReader class and depending on the number entered it will show that specific line of this peom:
One two buckle your shoe
Three four shut the door
Five six pick up sticks
Seven eight lay them straight
Nine ten this is the end.
The error message i got was an illegal start of expression. I can't figure out why it is giving me this error because i have if (n = 1) || (n = 2) statements. My code is:
public class PoemSeventeen
public static void main(String[] args)
EasyReader console = new EasyReader();
System.out.println("Enter a number for the poem (0 to quit): ");
int n = console.readInt();
if (n = 1) || (n = 2)
System.out.println("One, two, buckle your shoe");
else if (n = 3) || (n = 4)
System.out.println("Three, four, shut the door");
else if (n = 5) || (n = 6)
System.out.println("Five, six, pick up sticks");
else if (n = 7) || (n = 8)
System.out.println("Seven, eight, lay them straight");
else if (n = 9) || (n = 10)
System.out.println("Nine, ten, this is the end");
else if (n = 0)
System.out.println("You may exit now");
else
System.out.println("Put in a number between 0 and 10");
I messed around with a few other thing because i had some weird errors before but now i have narrowed it down to just this 1 error.
The EasyReader class code:
// package com.skylit.io;
import java.io.*;
* @author Gary Litvin
* @version 1.2, 5/30/02
* Written as part of
* Java Methods: An Introduction to Object-Oriented Programming
* (Skylight Publishing 2001, ISBN 0-9654853-7-4)
* and
* Java Methods AB: Data Structures
* (Skylight Publishing 2003, ISBN 0-9654853-1-5)
* EasyReader provides simple methods for reading the console and
* for opening and reading text files. All exceptions are handled
* inside the class and are hidden from the user.
* <xmp>
* Example:
* =======
* EasyReader console = new EasyReader();
* System.out.print("Enter input file name: ");
* String fileName = console.readLine();
* EasyReader inFile = new EasyReader(fileName);
* if (inFile.bad())
* System.err.println("Can't open " + fileName);
* System.exit(1);
* String firstLine = inFile.readLine();
* if (!inFile.eof()) // or: if (firstLine != null)
* System.out.println("The first line is : " + firstLine);
* System.out.print("Enter the maximum number of integers to read: ");
* int maxCount = console.readInt();
* int k, count = 0;
* while (count < maxCount && !inFile.eof())
* k = inFile.readInt();
* if (!inFile.eof())
* // process or store this number
* count++;
* inFile.close(); // optional
* System.out.println(count + " numbers read");
* </xmp>
public class EasyReader
protected String myFileName;
protected BufferedReader myInFile;
protected int myErrorFlags = 0;
protected static final int OPENERROR = 0x0001;
protected static final int CLOSEERROR = 0x0002;
protected static final int READERROR = 0x0004;
protected static final int EOF = 0x0100;
* Constructor. Prepares console (System.in) for reading
public EasyReader()
myFileName = null;
myErrorFlags = 0;
myInFile = new BufferedReader(
new InputStreamReader(System.in), 128);
* Constructor. opens a file for reading
* @param fileName the name or pathname of the file
public EasyReader(String fileName)
myFileName = fileName;
myErrorFlags = 0;
try
myInFile = new BufferedReader(new FileReader(fileName), 1024);
catch (FileNotFoundException e)
myErrorFlags |= OPENERROR;
myFileName = null;
* Closes the file
public void close()
if (myFileName == null)
return;
try
myInFile.close();
catch (IOException e)
System.err.println("Error closing " + myFileName + "\n");
myErrorFlags |= CLOSEERROR;
* Checks the status of the file
* @return true if en error occurred opening or reading the file,
* false otherwise
public boolean bad()
return myErrorFlags != 0;
* Checks the EOF status of the file
* @return true if EOF was encountered in the previous read
* operation, false otherwise
public boolean eof()
return (myErrorFlags & EOF) != 0;
private boolean ready() throws IOException
return myFileName == null || myInFile.ready();
* Reads the next character from a file (any character including
* a space or a newline character).
* @return character read or <code>null</code> character
* (Unicode 0) if trying to read beyond the EOF
public char readChar()
char ch = '\u0000';
try
if (ready())
ch = (char)myInFile.read();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (ch == '\u0000')
myErrorFlags |= EOF;
return ch;
* Reads from the current position in the file up to and including
* the next newline character. The newline character is thrown away
* @return the read string (excluding the newline character) or
* null if trying to read beyond the EOF
public String readLine()
String s = null;
try
s = myInFile.readLine();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (s == null)
myErrorFlags |= EOF;
return s;
* Skips whitespace and reads the next word (a string of consecutive
* non-whitespace characters (up to but excluding the next space,
* newline, etc.)
* @return the read string or null if trying to read beyond the EOF
public String readWord()
StringBuffer buffer = new StringBuffer(128);
char ch = ' ';
int count = 0;
String s = null;
try
while (ready() && Character.isWhitespace(ch))
ch = (char)myInFile.read();
while (ready() && !Character.isWhitespace(ch))
count++;
buffer.append(ch);
myInFile.mark(1);
ch = (char)myInFile.read();
if (count > 0)
myInFile.reset();
s = buffer.toString();
else
myErrorFlags |= EOF;
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
return s;
* Reads the next integer (without validating its format)
* @return the integer read or 0 if trying to read beyond the EOF
public int readInt()
String s = readWord();
if (s != null)
return Integer.parseInt(s);
else
return 0;
* Reads the next double (without validating its format)
* @return the number read or 0 if trying to read beyond the EOF
public double readDouble()
String s = readWord();
if (s != null)
return Double.parseDouble(s);
// in Java 1, use: return Double.valueOf(s).doubleValue();
else
return 0.0;
Can anybody please tell me what's wrong with this code? Thanks

String[] message = {
 "One, two, buckle your shoe",
 "One, two, buckle your shoe",
 "Three, four, shut the door",
 "Three, four, shut the door",
 "Five, six, pick up sticks",
 "Five, six, pick up sticks",
 "Seven, eight, lay them straight",
 "Seven, eight, lay them straight",
 "Nine, ten, this is the end",
 "Nine, ten, this is the end"
if(n>0)
 System.out.println(message[n]);
else
 System.exit(0);

What's wrong with this SQL?

what's wrong with this SQL?
Posted: Jan 16, 2007 9:35 AM Reply
Hi, everyone:
when I insert into table, i use the fellowing SQL:
INSERT INTO xhealthcall_script_data
(XHC_CALL_ENDED, XHC_SWITCH_PORT, XHC_SCRIPT_ID, XHC_FAX_SPECIFIED)
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N'
FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION
SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
I always got an error like;
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT,
ERROR at line 3:
ORA-00936: missing expression
but I can't find anything wrong, who can tell me why?
thank you so much in advance
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:38 AM in response to: jerrygreat Reply
For starters, an insert select does not have a values clause.
HTH -- Mark D Powell --
PP
Posts: 41
From: q
Registered: 8/10/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:48 AM in response to: mpowel01 Reply
Even I see "missing VALUES" as the only error
Eric H
Posts: 2,822
Registered: 10/15/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:54 AM in response to: jerrygreat Reply
...and why are you doing a UNION on the exact same two queries?
(SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:55 AM in response to: mpowel01 Reply
Hi,
thank you for your answer, but the problem is, if I deleted "values" as you pointed out, and then execute it again, I got error like "ERROR at line 3:
ORA-03113: end-of-file on communication channel", and I was then disconnected with server, I have to relogin SQLplus, and do everything from beganing.
so what 's wrong caused disconnection, I can't find any triggers related. it is so wired?
I wonder if anyone can help me about this.
thank you very much
jerry
yingkuan
Posts: 1,801
From: San Jose, CA
Registered: 10/8/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:59 AM in response to: jerrygreat Reply
Dup Post
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:00 AM in response to: Eric H Reply
Hi,
acturlly what I do is debugging a previous developer's scipt for data loading, this script was called by Cron work, but it never can be successfully executed.
I think he use union for eliminating duplications of rows, I just guess.
thank you
jerry
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:03 AM in response to: yingkuan Reply
Scratch the VALUES keyword then make sure that the select list matches the column list in number and type.
1 insert into marktest
2 (fld1, fld2, fld3, fld4, fld5)
3* select * from marktest
UT1 > /
16 rows created.
HTH -- Mark D Powell --
Jagan
Posts: 41
From: Hyderabad
Registered: 7/21/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:07 AM in response to: jerrygreat Reply
try this - just paste the code and give me the error- i mean past the entire error as it is if error occurs
INSERT INTO xhealthcall_script_data
(xhc_call_ended, xhc_switch_port, xhc_script_id,
xhc_fax_specified)
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE'
UNION
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE';
Regards
Jagan
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 11:31 AM in response to: Jagan Reply
Hi, Jagan:
thank you very much for your answer.
but when I execute it, I still can get error like:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
so wired, do you have any ideas?
thank you very much

And this one,
Aother question about SQL?
I thought I already told him to deal with
ORA-03113: end-of-file on communication channel
problem first.
There's nothing wrong (syntax wise) with the query. (of course when no "value" in the insert)

Can anybody see what is wrong with this SQL statement?

Hey guys, just a quick question. Can anybody tell me what is wrong with this line of SQL? I keep getting a syntax error message. I've been trying for ages and I can't see any problem at all!"
{code}prepStat = connection.prepareStatement("INSERT INTO WeatherHistory (Date, Location, Overview, Temperature, WindDirection, WindSpeed, Pressure) VALUES ('"+date+"','"+location+"','"+temp+"','"+windDir+"','"+windSpd+"','"+pressure+"')");{code}
All the field names and variables definitely exist so I can't see what the problem is!

DHD wrote:
Thanks for the replies.
I've matched the correct number of column names and variables, but still no luck.
And how exactly am I misusing Prepared Statements here?As noted above, not according to the code you posted. I didn't just pluck something out of my @ss and throw it out there. There was a reason behind what I said. And, if you mean you changed it, and you still got an exception, then post that exception (completely), and your new code, which is, hopefully, using PreparedStatement, (properly).

What is wrong with this code? on(release) gotoAndPlay("2")'{'

Please could someone tell me what is wrong with this code - on(release)
gotoAndPlay("2")'{'
this is the error that comes up and i have tried changing it but it is not working
**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 2: '{' expected
     gotoAndPlay("2")'{'
Total ActionScript Errors: 1 Reported Errors: 1
Thanks

If you have a frame labelled "2" then it should be:
on (release) {
    this._parent.gotoAndPlay("2");
or other wise just the following to go to frame 2:
on (release) {
     this._parent.gotoAndPlay(2);
You just had a missing curly bracket...

What's wrong with this function

What's wrong with this Function(PL/SQL) in this formaula column definition in Reports 6i
function currdateFormula return Date is
curr_date date;
begin
select to_char(sysdate, 'DD-MM-YYYY') into curr_date from dual;
return(curr_date);
end;
I get the following error in compiling
REP-1401. 'currdateformula'.Fatal PL/SQL error occured. ORA-01843 not a valid month.
The SQL select to_char(sysdate, 'DD-MM-YYYY') from dual; worked well in SQL Plus prompt.
I got a clean compile when i use just sysdate in the function (see below).
function currdateFormula return Date is
curr_date date;
begin
select sysdate into curr_date from dual;
return(curr_date);
end;
Appreciate your help
Raja Lakshmi

hello,
what you are trying to do :
fetch the current date and return it as the result of the formula-column.
what you are actually doing :
fetch the current date, convert it to text, assign this text to a date-variable which causes an implicit type-conversion.
in your case you create a date-string with the format dd-mm-yyyy. the implicit conversion then tries to convert this string back to date using the NLS settings of your session. depending on your NLS_LANG and NLS_DATE_FORMAT this might work, if your session-date-format is dd-mm-yyyy which obviously it is NOT as you get the error.
what you should do :
select sysdate into curr_date from dual;
this fetches the sysdate and stores it in your date-variable. there is no type conversion needed what so ever.
regards,
the oracle reports team

TS1424 This weeks "free" music download says to purchase .99? What's wrong with this!

This weeks free music download says to purchase .99? this is NOT free! what's up with this?

They may not have posted this week's track yet and left the old one which is now not free, or it could be an error with this week's track. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

When exporting a photo to photo library, all EXIF data is lost. What rational is behind this?

When exporting a photo to photo library, all EXIF data is lost.
What rational is behind this?

Thanks for your reply on this!
One issue seems to be with Foto Library app itself. When running an auto-correct there it looks like EXIF will be stripped more or less completely.
Second issue is in iPhoto app on iOS when working on RAW. When exporting to the roll the EXIF is modified in a way. It was keeping most of the EXIF in case of Canon 5D MKII that I tested today, but the EXIF data is definately changed, e.g. lens type is different because maybe some fields are ignored there. Also the images are silently scaled down by 50% which is kind of annoying.
The initial problem was observed with a Pentax K7 and I will need to reproduce the issue in this config I assume. Maybe tomorrow I can do this.

Data Reading Capture Error - what's up with this?

Similar Messages

Maybe you are looking for