Data records in an IDoc getting erased, when conversion rules are defined
Hello ,
We are sending IDocs of message type GLMAST & COELEM from a system(version 4.7) to another system (version 4.6B).
The segment data in the IDocs are changed using the user exit enhancement KKCD0001. The function exits used are EXIT_SAPFKCIM_001 and EXIT_SAPFKCIM_002.
If there is no conversion rule defined in the receiver system, for the segments, the IDocs are posted correctly in the receiving system. But if we define conversion rules , then the data records for all the segments for which conversion rule is defined are getting erased, and an error occurs during processing of IDocs
Please let me know what can be the the reason behind this issue..And how to solve this..
Thanks in advance,
Afsar
Issue solved
Similar Messages
-
Comparing two data records of same IDOC
Hi,
In PI, we need to compare two data records of same IDOC to figure out if what type change occurred. For example, BENFIT3 IDOC contains data records tilted "E1BEN04". When there are multiple "E1BEN04" data records, then we need to compare the data inside them to see whether name, or data of birth or SSN is changed.
Has anybody came across this before. Your help is much appreciated.
Thanks
-TejaIf it is very few fields then you could use graphical mapping to determine the changes.
-
HT201342 Can I get my old pic back the one get erased when I rest my phone
Can I get my old pic back the one get erased when I rest my phone
You can if it was in your camera roll when you last backed up to iCloud, but you will have to restore the entire backup to recover it (not just photos). If you want to do this, it has to be done in the initial setup process. If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup (see image below). Be sure you are connected to wifi and your charger as this will take some time to finish.
-
Does IDoc get triggered when GR occured for a particular po
Hi Friends,
Say a GR occured for a particular PO,so i want to track this GR in Action Code that GR has occuredand no other details is needed except that.
so,my question is "Does IDoc get triggered when GR has occured for a particular Purchase Order".
If so can u explain me the process, how to track?
Thanks in Advance,
Meghna.Hi,
If u want to know that IDOC has been triggered then u have to do ALE setting then u can know that idoc has triggered in WE02 transaction.
Other than that if u want to know that PO has been there in GR then for Create CO01,CO02,CO03 for GR details.
the IDOC for GR is MBGMCR.MBGMCR02.
Regards,
Phani
Reward pOints if Helpful -
Why is it like if i don't sync the data in my pad to the itunes of my system ,the data in my ipad is getting cleared when i copy any thing to my ipad.This is not comfortable rite?why is this so.?or there is any other way?
i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason. -
why did all my music on my iphone get erased when i tried to sync to the iTunes on my new laptop?
As a rule syncing is one way, from the library to the device. There should have been a warning that media content on the device would be removed and replaced with that in the local library. If the content were still on the device it could be recovered with the steps in Recover your iTunes library from your iPod or iOS device. You can redownload your qualifying past purchases from the iTunes Store, Amazon store, etc. Do you have the previous computer your device synced with, or a backup, from which the library could be recovered?
tt2 -
IDOC reprocessing with new conversion rules
Hi All,
we've created IDOCs and after the creation the conversion rules are changed. Now we want to reprocess the IDOC's and in the reprocessing we want to use the new conversion rules.
I've tried just reprocessing, I also tried WE19, but with these 2 the conversion rules seem to left untouched.
Has anyone a solution were I can reprocess making use of the new rules?
kind regards,
PieterHi,
I've debugged the reprocessing of the idoc and it seems indeed I had to change the status, however not all statusses result in reprocessing of the rules. Status '29' Error in ALE Service works. So my problem is solved.
Thank you.
kind regards,
Pieter -
E1EDKT1 Data Record of an IDoc.
We are working on an Outbound Inovice IDOC of Basic Type INOVICE02 and Mesg type INVOIC.
In data record E1EDKT1 which has got E1EDKT2 Segment is mapped some unknown field whre email ID was coming. We need to change the value of this emil ID.
We dont have any mapping doc in place.
Is there any area where we can see which field this segmetn has been mapped to
Regards.Hello Amit,
I checkd in WE30.I think release version is different from EDI version because for a vendor in the system the release is 46C whereas EDI version is V11.
Thanks,
Rakesh. -
why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.
-
About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased.
I had to restore through my iTunes but then I could not load my music back on.
I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
Of course, my 1 Year Warranty was up about a week before the first incident.....
I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
Does anyone know what is going on with this thing??? I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this!
Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
Thanks.When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day! -
My username and password get erased when I try to remote log in to my corporate email account
Hi Folks,
When I try to log in remotely to my corporate (Outlook) email account, the correct username and password are erased once I hit 'enter' and I don't get in. I bought the Toshiba laptop a couple of weeks ago and I could get in for a while, but then I couldn't.
I'd appreciate any suggestions,
Thanks,
PTry going to this link and see if the instructions there help.
https://www.google.com/accounts/DisplayUnlockCaptcha
B-rock -
Fullscreen Gallery image gets erased when scrolling on Chrome
I'm working on a website where we have an abstract video background playing behind a transparent logo, which when clicked scrolls the page down to the main content. The logo is layed over the video background as a single image in the Fullscreen Gallery widget, so that it resizes according to the browser size. On Safari and Firefox, everything works great (although a little slowly, I'm going to compress my images before the site is announced). But on Chrome, the scrolling window erases the fullscreen image from the bottom up, leaving only the background image behind it, and it looks terrible. I've run it without the video backround, and without the scroll effects on the item beneath the video, and I've pinned the gallery in place, but nothing seems to work. My site is live, though unfinished, at adptpro.com if you'd like to see what I'm talking about.
Any help? Or is there a more robust way to create the effect I'm going for?
Thanks!Any guesses on what I need to do?
I would not want to hazard a guess until I can check the instantaneous data rate at the time of the problem. Got the URL and a time where the file stops? -
The App tabs that I set get erased when I close the browser. How do I get them to stay?
I have set app tabs during a browsing session. The tabs stay in place as I go from site to site. When I close the browser and then re-open it the app tabs are erased and I have to start over again. I have been working around the problem by bookmarking the sites I use often, but that is an inconvenience. Would appreciate any suggestions.
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed. -
HT1535 What all gets erased when you choose to manually manage your music?
I got a new laptop not long ago and I currently have the newest version of iTunes installed on it. I also just got the iPhone 5 so I wanted to put more (new) music on it that did not upload with iCloud. Except I want to manually manage my music as opposed to automatically syncing. When I choose the option to manually manage, it says that everything will be erased from my iPhone. Can someone just clarify what exactly will be erased, is it just my music and apps or is it basically everything on my phone as if its gettign restored to its factory settings?
ThanksHi, welcome to Apple Discussions.
Unlike most of Apple's iPod devices, the iPhone is resticted to holding content from a single library, even when manually managing that content. If a particular file isn't in the local iTunes library when you update the device (e.g. add or remove a single track) it will be deleted. This makes any potential benefit of manual management pointless. Since this restiction is imposed by iTunes you may prefer to look at 3rd party tools to manage media content on your iPhone. Alternatively stick your library on an extenal drive so that you can manage it from any computer avaiable to you.
tt2 -
Conky gets 'erased' when open window moves over it
Just installed conky on my 32-bit, xfce machine. It seems to be working fine--with the exception that moving any open window over it erases the part it passes over--almost as if the conky display were chalk on a chalkboard.
Within 2 or 3 seconds conky 'redraws' itself, but it's kind of annoying to have pieces of it disappear like that.
I've tried some own_window_type settings, but nothing has helped so far...illusionist wrote:
wilberfan wrote:I've tried some own_window_type settings, but nothing has helped so far...
Not enough information. What is some here ?
"Some" is all of the options I've seen to try during heavy Googling--which I was too lazy to go back an look up as I was posting this: "desktop", "override", "normal". Is there a 'best choice' for xfce4? Transparency is working, but I don't have any compositing turned on...
Last edited by wilberfan (2012-12-01 15:40:12)
Maybe you are looking for
-
Can I use both Lightroom for a Mac and PC to do the same project?
My school uses Mac I use PC I would like to know if I start my project in light room for Mac if I can finish it in Lightroom for PC?
-
Fcode for Minimize/Maximize is 'ENTER' when we go thru WEB Gui
Hi, We are Upgrading our System from 4.6c to ECC 6.0. We are facing a strange error actually. When we go through the application in SAP GUI Mode , the screen Minimize / Maximize is working fine. But when we go through Web Gui, This scrren Minimize/Ma
-
Page fully loads in IE but not in Firefox
This page opens fully in IE but not in Firefox 4.
-
Hello all, i want to get recipe blast for all plan numbers just like tcode C203. My RFC will give plan number, material number and the phases of that plans. I tried to filter the datas from PLPO, MKAL, PLKO but i couldnt filter as i wanted. i have s
-
Installing Redhat Linux VM using multiple ISO images
Hi, How can I install a Redhat Virtual Machine using multiple ISO images which are in my hard disk in Oracle VM Server. I did install Windows and Oracle Enterprise Linux successfully from ISO s because they are all single ISO images. Windows XP ISO i