Data recovering from formatted bit locker encrypted portion.

unfortunately i formatted a partition which is bit locker encrypted having all my valuable documents and data. luckily i have bit locker recovery
key and my decryption password. i use m3 bit locker recovery software to recover my data using my store 48 digit recovery key but it give me error message 'recovery key is not matched' then i try my password, it give error message 'password not
matched' .
using cmd command 'manage-bde -status'
i get the following properties of my partition
C:\Windows\system32>manage-bde -status
BitLocker Drive Encryption: Configuration Tool version 6.1.7601
Copyright (C) Microsoft Corporation. All rights reserved.
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume D: []
[Data Volume]
Size: 218.81 GB
BitLocker Version: None
Conversion Status: Fully Decrypted
Percentage Encrypted: 0%
Encryption Method: None
Protection Status: Protection Off
Lock Status: Unlocked
Identification Field: None
Automatic Unlock: Disabled
Key Protectors: None Found
i use other data recovery soft wares it give me raw,meta and system file.
please help me in recovering my data.
sorry for unrelated description.

Hi ,
I am afraid that we cannot get the data back if the drive has been formatted even if use the
BitLocker Repair Tool.
You’d better contact your local data recovery center to try to get data back.
Tracy Cai
TechNet Community Support

Similar Messages

Data Recovery from Partitioned and formatted Bit Locker Encrypted Drive

Recently because of some issues in windows 7 installation from windows 8 installed OS. it was giving as the disc is dynamic windows can not be installed on it. so at last after struggling hard no other solution i partitioned and formatted my whole
drive so all data gone included the drive which was encrypted by bit lockers.
For recovery i used many software such as ontrack easy recover, get data back, recovery my files professional edition but still i couldnt able to recover my data from that drive. then i found some suggestion Using CMD to decrypt my data first
http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
where it shows it successfully decrypt my data at that moment my drives were in RAW format excluding on which windows is installed and then in CMD i check Chdsk which also shows no problem found. but now problem is still i coudnt able to recover
my data then i format the drive D and again tried to recover data using above software after decryption still no result.
Now i need assistance how i can recover my encrypted drive as it was partitioned and also formatted but decrypted also as i have its recovery key too. thanks

Hi ,
I am afraid that we cannot get the data back if the drive has been formatted even if use the
BitLocker Repair Tool.
You’d better contact your local data recovery center to try to get data back.
Tracy Cai
TechNet Community Support

Data Recover From Formatted Drive? What is the best program to use to get back Logic Projects and any other file type?

I was in the process of reorganising my hard drives so I could RAID them however I managed to corrupt one drive and had to format it which meant I lost all my Logic Files and some other files. I managed to save a lot of files (mainly video files) before I had to format the drive but I need a Data Recovery service that will not alter anything on the hard drive and will put all the formatted files (regardless of the type) back for me so I can get the rest of the ones I need.
Thanks in advance.

What about folders and such?
No. FS doesn't reconstruct folders. However, Data Rescue does, depending on how you use it. About the only thing in Data Rescue a Quick Scan ever seems to show you are files that are already live.
So that leaves you with a Deep Scan, or a Deleted Files scan. The first pass of a Deep Scan will attempt to retrieve folders and files, along with their original names. The second pass only looks for file patterns. Like recognizing a Photoshop .psd file. It will recover it, but give it a nonsense name. A Deleted Files scan only results in nonsense names of recognized file types; no folders.
What were you using File Salvage on? A hard drive?
Yes, though you can use it on a flash drive, or any other mounted drive.
At the moment it is estimating 289 hours remaining on a 1TB drive. Can it not go faster?
No, both of the software mentioned are slower than molasses in January. When you delete anything in Windows, its file table entry simply tagged as deleted. So to unerase them, the tag is removed. That's why it works to quickly and easily (assuming you haven't already overwritten the data to be recovered).
In OS X though, the whole idea of the underlying UNIX structure is all about security. It's not supposed to be easy to retrieve deleted items. When you delete items, their file table entries are erased. So the only way to find deleted items is to scour the entire drive for BOF (Beginning Of File) markers that don't have a matching starting block to anything that is in the file table.
Another question, half the drive was empty. Will it fly over that empty space or will it sieve through it incase there was some files stored on it?
If you use the Expert mode is FS, you can choose to do that:

Bit locker encryption requests key unless I suspend and resume the encryption

I am rolling out new computers with Windows 7 Enterprise OS on them. I am installing bit locker encryption on them. For some reason with this group of computers, and I recently rolled out a different batch of computers without this problem,
after encrypting, I must suspend and resume bit locker or upon restart of shutdown and start the user is prompted for the bit locker encryption key.

Hi,
Could you please tell some more details about the issue? What do you want to achieve here? To enable bitlocker without the prompt of the startup key? If it is , then please take a check if we have Require
additional authentication at startup policy enabled.
Besides, could you please have a share for how do you enable bitlocker?
And here is a guide for bitlocker in Windows 7, just for reference:
BitLocker Drive Encryption Step-by-Step Guide for Windows 7
BitLocker Drive Encryption in Windows 7: Frequently Asked Questions
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Check Status of Bit Locker Encryption on all Computers on My Network

I have encrypted all computers on my network with bit locker encryption. However, for various reasons I know that there a few that are not encrypted. Is there a tool I can use to check the encryption status of all the computers on my network?

Hi,
You can use MBAM to manage and monitor your computers bitlocer encryption status, please refer to the link below for more details:
http://technet.microsoft.com/en-us/windows/hh826072.aspx
Roger Lu
TechNet Community Support

Windows 8: Bit Locker encrypted drive "Access Denied" external drive

I rebuilt my computer and installed win 8.1 pro. Now my external drive comes up as an empty drive with "Access denied". Here is the kicker: I had turned off bitlocker on the external drive long ago as it interfered with automated backups.
Running the commands suggested here:
https://social.technet.microsoft.com/Forums/windows/en-US/738c1760-c96d-430f-9ae6-1f28f5c60998/windows-8-bit-locker-encrypted-drive-not-found-or-access-denied?forum=w8itprosecurity it shows the bitlocker but as unlocked. Drive still shows empty.
Any suggestions?
Thanks,
Markus

Ahh, turns out to be permission issue not bitlocker (or maybe bitlocker caused it to lose permissions, don't know).
Opened MyPc, right click on drive ->properties->security->advanced and selected apply to all.
Markus

Windows 8: Bit Locker encrypted drive "Not Found" or "Access Denied"

I just upgraded my Windows 7 Ultimate to Windows 8 Pro. C drive is not Bit locker protected, but D drive is. When I go to Computer and double click on D drive, it tells me one of two errors: 1) Application Not Found (more common), or 2) Access is Denied
(less common).
I thought maybe Bit locker wasn't working, but I plugged in my USB stick that is encrypted and had no issues; it asked for the password and opened the folder.
One thing I did earlier was to setup a new local account, give it administrator password, then delete the other account that I had originally used in Win7 (and in installing Win8). Maybe this caused some sort of security problem.
Please help.
Thanks.

I have been using Bitlocker since it was available with Vista Ultimate. I have had the same password to unlock my drive for 5 years. I NEVER keep my recovery key this drive. but just last month i copied all my data to another drive formatted
it to freshen it up and copied it back over. For some reason i kept the recovery key TXT file.... when i tried your method here due to the same exact problem listed the command prompt would not allow me to enter a password in CMD or powershell. Since
i had the recovery key .. THANK GOODNESS it unlocked perfectly and i was able to retrieve my 6 years of Data. So yes, this works and works well. thank You!

Bit Locker Encryption

1. Once the Bit Locker enabled on a drive, how do we confirm on data which is stored in that drive are encrypted?
2. The data size stored on encrypted drive vs non-encrypted drive will be same or different?

Hello,
I'd ask in the Windows forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Data recover from a hard drive error 301

Can anyone advise me of how to recover data from a hard drive error 301. I have a pavilion dv7-4177 and i received the hard drive error code 301 two weeks after the warranty expired. I back up my data so I though but when tried to reload that data on a new hard drive it would not take. The damage hard drive will not load the OS now even in safe mode. Is there any way to retrieve this data from that hard drive.

Hi,
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

External drive bit locker encryption hang up , while entering password

recent i encrypted my 1tb external hard drive, and ts worked fine , suddenly yesterday i entered a password in password window its hangs up , i waited for 3hrs its still like same (not responding) i need that data its really important to me

Try try Bitlocker repair tool..http://www.microsoft.com/en-us/download/details.aspx?id=17294
"The BitLocker Repair Tool can assist administrators in recovering data from a corrupted or damaged disk volume that was encrypted with BitLocker."
Using the BitLocker Repair Tool to Recover a Drive
http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
http://support.microsoft.com/kb/928201
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

I need help in restoring data recovered from hard drive crash to new hard drive

I have the data that was recovered by a recovery service (long story) from my wife's hard drive after it crashed, which is now stored on my computer. There are two user data sets that have been recovered, one for each of us. I need to put each on my wife's computer with its new hard drive, which now has OSX 10.10.? (Yosemite) on it.
My wife's computer was running OSX 10.7 (Lion) when the hard drive failed and my computer is still running OSX 10.6.8 (Snow Leopard).
I was told that I should use the Data Transfer Utility (starting my computer up while holding the "T" key), but I have forgotten what I have to do when I start up her computer. Are there any operating system compatibility problems that are sensitive to this process?

That is a Microsoft Windows question?? You should probably ask this question on Microsoft's Forums. BTW there is no "Windows 9". Only Windows 7, Windows 8 and apparently MS is skipping the number 9 in favor of 10.

HELP iPhone 5 got reformatted while being updated. not all datas recovered from iCloud.

I recently updated my iphone5 with iOS 7.0.3 but while updating it was reformatted. I tried to recover my apps and photos from iCloud but not all datas were recovered. I am sure that I was able to back up my phone regularly. Only new photos were recovered the older ones which were the first ones that I backed up cant be found. Can I still recover those datas?

Restoring the backup should recover the photos that were in the camera roll at the time of the backup. If that didn't happen, all you can do is try restoring the backup again. You might try some of the tips mentioned in this discussion thread that other's found useful when they had a similar problem, such as the one by ezjules: https://discussions.apple.com/message/19518589#19518589.

How to recover from formatted disk

Hi
I have a problem searched google and feeling very hopeless. Actually i have installed Oracle 8.1.0 on D drive and my Operating System on C drive crashes. I have all files of installed Oracle but now don't know how to recover my DB.
I have installed OS and Oracle on C drive now but what to do next. PLZ consider me a developer rather DBA.
Regards
Bilal

Here are steps to recover in this type of failures:
1). install O.S
2). Install Oracle (software only)
3). Create Service (in windows case only) using oradim utility
4). Recover/repair/start database
--- since you have reinstalled the software and the Oracle_home might have changed, (as said earlier) so in new Oracle home\database folder, copy your pfile/spfile and password file.
--- make sure all relevant folders are created for dump directories as it is mentioned in pfile/spfile.
--- startup the database

Bit locker unable to turn on

Hi,
I am trying to turn on Bit locker for removal Disk, could not succeed. System says that, required services not enabled. I remember I changed the registry setting to disable to bit locker encryption. I do not re collect what I have changed. Could you
please let me know what setting value is to be set for enabling the Bit locker encryption.
Thanks
Sreekanth.

Hi,
As narcoticoo mentioned, do we have TPM chip on the computer? Please take a look into Device Management, if the TPM driver is installed then it will show up in the Device Manager, under Security Devices as mentioned.
Please also take a look at the below article regarding how to turn on/off bitlocker without TPM:
How to trun on or off bitlocker without a TPM for Windows 7 Drive
Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
of this information.
For more information regarding Bitlocker for Windows 7, please take a look at the article below:
BitLocker Drive Encryption Step-by-Step Guide for Windows 7
Hope this may help
Best regards
Michael Shao
TechNet Community Support

FORMAT WINDOWS 7(64) BY MISTAKEN NOW HOW I RECOVER ERASED DATA WHICH I HAD LOCKED DRIVE BY BIT LOCKER

i'm using windows 7 (64 bit) but experiment to install mac on my PC (i 5-4 GB ddr 3-500sata sea gate).by mistaken its format my whole hard drive which is 500 GB sea gate sata.after this i'm confused and install windows 8.1 and then again i had install windows
7 (64 bit) now after 2 time partition erased i'm trying to recover my data 50 percent data but which drive i had locked with windows 7 bit locker it cant recover any thing I've remember its password.
any one help me to get back my data from this locked drive ?

RB
If the drive was both formatted and bit locked you cannot recover your data.
Wanikiya and Dyami--Team Zigzag

Data recovering from formatted bit locker encrypted portion.

Similar Messages

Maybe you are looking for