Data recovery iphone 5 please can someone help?
Hi
My phone was dropped down the toilet and it won't start up. I keep getting the following message: nand findflashmediaandkeepout 601
Is my phone completely dead or can it be fixed? Also is it possible to recover any data from it like pictures, videos and bookmarks?
Any help would be fantastic?
Thanks in advance
Sounds like your logic board has failed, and no, there's no way to recover any data from your phone. Make an appointment at any Apple store, an out of warranty exchange will cost US $149 ~ $269, depending on iPhone model.
Similar Messages
-
Hi iv added iCloud to my iphone5 and by doing so I've now lost all contacts, photos and also my iMessage please can someone help me to restore my phone back to how it was before doing this? I went to backup and chose wrong backup date and I'm now stuck. This is driving me mad PLEASE someone help??
As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you. -
I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?
If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier). Is this your situation?
Otherwise I'm not sure what you mean by "trying to unlock my SIM". In which country did you buy the iphone? Who's your carrier? -
unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I then everything runs normal and it extracts and then i get an error code at the end 3197. had the iphone for two months and its new.
Please can somene help me, i am currently on version 4.3.3 (8J2)
Modem Firmware 04.10.01followed someones instructions and it has worked ios 5 is now working on my iphone 4
-
please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4?
place the device in pairing mode and re-pair.
If you don't know how to do this, go to the manufacturer's website and download the user guide for your device. -
Hi, please can someone help me?
Have just returned home from abroad where my iphone 4 worked perfectly.
Now at home it wont receive wifi. It picks up the signal which shows in phones display but cant connect to the internet. Computers and ipod all working fine so I assume it must be a problem with the phone.
Have checked that wifi is turned on and tried resetting phone to no availHello melissa82686,
From your description, it sounds like you may have been using the SMS feature of Continuity in iOS 8. If this is the case and it has somehow become misconfigured after a recent change, you may find the information and steps outlined in the following articles helpful:
SMS
With Continuity, all the SMS and MMS text messages you send and receive on your iPhone also appear on your Mac, iPad, and iPod touch. Even if the person you’re communicating with doesn’t have an iPhone. And regardless of what phone they have, you can reply from whichever device is closest to you, including your iPad or Mac. You can also initiate a conversation by clicking a phone number in Safari, Contacts, or Calendar.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Sincerely,
- Brenden -
TS4268 My iphone will not send imessage for normal messages. please can someone help?
My iphone will not send imessage for normal messages. please can someone help?
Hi maccaman82,
If you are having issues sending messages from your iPhone, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden -
I cannot charge my iphone 5c can someone help me please!
I cannot charge my iphone 5c please can someone help me!
ok well this is a couple of difrent reasons of why it could be not working
1. your charger is broken
2. your plug which you tried to charge your iphone is messed up
3. your charger port on your iphone is messed up -
I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
6% InterCheck
5% iCalExternalSync
3% WindowServer
2% CalendarAgent
2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outsUninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
my apple ID is showing someone elses email address and not mine so when i want to buy or update apps it brings this other email address up. please can someone help how do i put it back to my email address?
First go here - https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and login under the manage tab. Check your information and be sure it is all correct.
An AppleID is nothing more than an email address, so if you see another email address in the store, then someone has logged in with a different AppleID than yours. Did you let someone else use your iPhone? -
Please can someone help me to build a query
Please can someone help me to build a query for getting the following results. I work with Oracle 9.
My data is about this:
Projectid / Activitycode / Act.DS / Earlystart / ActualStart
{color:#ff0000}P001 / 110M / blabla / 1-1-08 / 1-1-08{color}
{color:#3366ff}P001 / 230M / fdsfds / 31-1-09 / null{color}
P001 / 450M / fsfsd / 1-4-09 / null
P002 / null / null / 1-12-08 / 1-12-08
{color:#3366ff}P002 / 110M / nhggh / 5-2-09 / null{color}
P002 / 750M / wdwdwd / 5-2-09 / null
P002 / 210M / plplplp / 31-12-08 / 31-12-08
{color:#ff0000}P002 / 550M / ewdwd / 5-1-09 / null{color}
I'd like to get one row for each Projectid with the {color:#3366ff}first next Early- or Actualstart{color} {color:#3366ff}after today{color} and one row with the {color:#ff0000}latest early-/actualstart before today{color}. When there are two or more rows with the same date then I want the first (minimum) Activitycode. This last condition makes it insoluble for me!
I've tryed SQL with nested Select-statements in the Where-clause. But I've got still 2 rows per projectid because I select the min(nvl(Earlystart ,ActualStart ) I've tryed SQL with an Select in the FROM-claus with Partion BY, but I can't get it work right.
Can someone show me the right way to solve my problem?How's this?
with my_tab as (select 'P001' projectid,
'110M' activitycode,
'blabla' act_ds,
to_date('01/01/2008', 'dd/mm/yyyy') earlystart,
to_date('01/01/2008', 'dd/mm/yyyy') actualstart
from dual
union all
select 'P001' projectid,
'230M' activitycode,
'fdsfds' act_ds,
to_date('31/01/2009', 'dd/mm/yyyy') earlystart,
null actualstart
from dual
union all
select 'P001' projectid,
'450M' activitycode,
'fsfsd' act_ds,
to_date('01/04/2009', 'dd/mm/yyyy') earlystart,
null actualstart
from dual
union all
select 'P002' projectid,
null activitycode,
null act_ds,
to_date('01/12/2008', 'dd/mm/yyyy') earlystart,
to_date('01/12/2008', 'dd/mm/yyyy') actualstart
from dual
union all
select 'P002' projectid,
'110M' activitycode,
'nhggh' act_ds,
to_date('05/02/2009', 'dd/mm/yyyy') earlystart,
null actualstart
from dual
union all
select 'P002' projectid,
'750M' activitycode,
'wdwdwd' act_ds,
to_date('05/02/2009', 'dd/mm/yyyy') earlystart,
null actualstart
from dual
union all
select 'P002' projectid,
'210M' activitycode,
'plplplp' act_ds,
to_date('31/12/2008', 'dd/mm/yyyy') earlystart,
to_date('31/12/2008', 'dd/mm/yyyy') actualstart
from dual
union all
select 'P002' projectid,
'550M' activitycode,
'ewdwd' act_ds,
to_date('05/01/2009', 'dd/mm/yyyy') earlystart,
null actualstart
from dual)
-- above mimics your table; main query is below:
select mt2.projectid,
mt2.activitycode,
mt2.act_ds,
mt2.earlystart,
mt2.actualstart
from (select mt.projectid,
mt.activitycode,
mt.act_ds,
mt.earlystart,
mt.actualstart,
mt.date_col,
mt.before_after_today,
row_number() over (partition by mt.projectid, mt.before_after_today
order by mt.date_col asc) rn_after,
row_number() over (partition by mt.projectid, mt.before_after_today
order by mt.date_col desc) rn_before
from (select projectid,
activitycode,
act_ds,
earlystart,
actualstart,
coalesce(actualstart, earlystart, to_date('01/01/4000', 'dd/mm/yyyy')) date_col,
case when coalesce(actualstart,
earlystart,
to_date('01/01/4000', 'dd/mm/yyyy')) <= trunc(sysdate) then 1
else 2
end before_after_today
from my_tab) mt) mt2,
(select 1 id, 1 col_id from dual union all
select 1 id, 2 col_id from dual) dummy
where dummy.id = case when mt2.before_after_today = 1 then rn_before
else rn_after
end
and mt2.before_after_today = dummy.col_id
PROJECTID ACTIVITYCODE ACT_DS EARLYSTART ACTUALSTART
P001 110M blabla 01/01/2008 01/01/2008
P001 230M fdsfds 31/01/2009
P002 550M ewdwd 05/01/2009
P002 110M nhggh 05/02/2009 -
Please can someone help me to access remote desktop connection
Please can someone help me to access remote desktop connection on my macbook pro 13inch. I do have office 2011 installed.
Hi Tartan Pearl,
Welcome to the Apple Support Communities!
It sounds like you may need help with a forgotten passcode on your iPad. If this is the case, please refer to the attached article for information on how to troubleshoot this situation.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Have a great day,
Joe -
MY IPOD IS STUCK IN RECOVERY MODE. CAN SOMEONE HELP ME FIX THIS
MY IPOD IS STUCK IN RECOVERY MODE. CAN SOMEONE HELP ME FIX THIS
Withour knowing whar happens when you try to restore the iPod all I can suggest is:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
please can someone help me to unistall itunes from my laptop control panel, this means it also wont let me install the latest version!
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
I cant install or uninstall my itunes. I get this error 'the feature you are trying to use is on a network resource that is unavilable' Now ive seen the solutions on here but im using windows 8.1 and none of them work for me. Ive tried all options so please can someone help?
That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please....
Maybe you are looking for
-
Is there any way to change the default icon of opera in the taskbar?
It doesn't use the icon of the theme, and seems it use an ugly xpm picture. Anyway, if it doesn't have such glitch, I will not complain about it. Placing another /usr/share/pixmaps/opera.xpm doesn't help. (I edit the xpm file and it's array name to l
-
Copy Finder Items - how to generic for multiple user home directories?
I am creating an Automator workflow to allow my networked users to be able to copy certain files from a central location to their local home directory and overwriting their local copy. How to I make the destination of the Copy Finder Item to be gener
-
Error while opening the Infopackage
Hi All, When I try to open the Info package it is throwing short dump - "MESSAGE TYPE X" I have tried by deleting the IP and creating new one but still I am facing the same issue. Thanks, Ramanathan.R
-
Can't install Adobe Photoshop Elements 13 on PC
I'm trying to install this software (Microsoft version) onto my PC and keep getting a message that this program is counterfeit. My husband purchased this for me at Christmas from Best Buy so it is NOT a pirated program. I've registered my redemptio
-
How to create transformations in BI content
hi, while doing lo extraction , i have used data source 2lis_11_vaitm and cube 0sd_c05. I have replicated the datasource in BI, can anyone tell me how to create transformations to the data target which is 0sd_c05.