Data reload from PSA problem

I has standrat BI7 data load process: DataSource -> IPackage -> DTP -> DSO.
I've deleted 3 last requests in my custom developed DSO. They do exists in PSA. Now I want them to be restored from PSA, but unfortunately, there is no "Update with scheduler" menu item then I right click on request in PSA.
The data source, IPackages (full, init, delta) and the DTP are active.
I tried to use rsa1old, but I didn't datasource in data source tree, probably because i'm using BI7 data load...
So, why SAP doesn't allow me to update requests again? Are where any other ways to do it?

Hi Gediminas,
once you deleted the requests from DSO automatically you can observe the "not updated to any target" symbol in the PSA fro those requests that are deleted from DSO
so when you schedule the DTP (Delta) again it will only take the requests from PSA which are not updated to any targets so it should take the deleted three requests and once they are updated to the target the symbol will change in PSA for those requests
But if you do any structural change to the data source then you again need to replicate adn activate the Data source and load the data up to PSA
Thank you

Similar Messages

Error 8 during data transfer from PSA - Cube

Hello,
when I want to load data from PSA to Cube I get "error 8 in update".
I already had error 7 oder error 4 in the past, but what does this error 8 mean and how can I solve it?
Thanks in advance

The reason is this
that if you try to load data records to the cube which is already archived. Please note that until the archives are not reloaded
back, the same interval cannot be loaded.
workaround in case of semantic lock is
is to reload the data from archive -> semantic lock disappears -> load/update the data -> archive data again.

How to load data for attribute of Master Data Object from PSA

Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSA

Jr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help

DTP can Not extract data of date field from PSA to Target DSO

Hi everyone.
I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
The data of date type fields are extracted very well from datasource to PSA.
But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
Another date type fields is good. but only "BLDAT" field is empty.
I added "BLDAT" later than another date fields.
Is that the reason??
I don't know why.
Let me know the solution. pls~~~~

Hi,
Try deleting and recreating the DTP and loading again.
This solution refers to note 925941 and should be solved in SPS10.
Best regards,
Olav

Data is not updating in data target from PSA

Hi,
i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..

hi bwusr,
direct update, so it's master data,
is it attribute or text ? perhaps there's invalid character or lower case,
check in monitor tab detail.
and when you said not updated to data target,
you check by right click 'maintain master data' ?
or you mean it's not updated to reporting ?
execute change run ? rsa1->tools->apply attribute/hierarchy change.
hope this helps.

Data Deletion from PSA Tables

Hi,
I deleted 2 failed requests (10000000 Records) from PSA Tables because of the disk space issue for our BW System.
RSA1PSA DELETE PSA DATA
The requests are deleted from the PSA, In BW in can see that there not requests in that particular PSA.
But Basis/Database team raised an issue that the data has been added to the Database
What is this mean and how can I proceed with this
Thanks

Hi,
Thanks for the info provided.
So according to the info provided the Deleting the request from the PSA marks as To be Deleted
When the last of all requests in one partition gets deleted, what do you mean by this.
There are 2 requests in our PSA,I deleted 2 of them and in BW when I go to PSA there I dont find any requests available in PSA.
But our basis team complained that some data has been added to data base
Thanks

Data moving from PSA to Infoobject- ASAP

Hi all,
I am moving data from R/3 to an Infoobject, strangely the data get updated till PSA but no to the infooject. so while debugging the tranfer structure i found that the infoobject is assigned with incorrect R/3 filed. My doubt is if in the tranfer structure level itself it is incorrectly assigned the how does the data appear in PSA. Please clear my doubt.
Regards

Hi,
the data is tranfered from R/3 to PSA without any trasformation. So transformation can be done in update or transfer rules. Chechk them both and import the data again.
Regards
MK

Transaction Data Load from Infoprovider Problem?

Hi Dear colleagues;
I have a load transaction from infoprovider data problem. I have transformation file and i prepared our mapping. my transformation file like this:
http://img822.imageshack.us/i/capture1cw.jpg/
Then , run package .The result like this :
http://img291.imageshack.us/i/capture2m.jpg/
and also Package status situation like this :
http://img836.imageshack.us/i/53445642.jpg/
As you see in 3rd picture .. Submit count seems 18525. So i have 18k datas in my BW cube. Lets look Bw side
http://img513.imageshack.us/img513/5760/capture4o.jpg
as you see My BW Cube is empty
http://img137.imageshack.us/img137/6451/capture3dg.jpg
and there is no pack in my BW cube.
I tried to explain my problem in this way.
What should i do in this situation?
Edited by: Breathe_ on Jan 5, 2011 10:34 AM

Thanks for your answer nilanjan. But when i check reject records and reject datas , i couldn't see any hint. Otherwise i want to ask one more question:
my transformation select row like this :
SELECTION=0SALESORG,1000;0SALESORG,2000;0SALESORG,3000
can i write multiple selection about 0SALESORG ? ( EX: 0SALESORG,2000,3000...) are there any syntax about that?
Take it easy...

Extract specific data packages from PSA

Hi all,
When loading 20 million records from the PSA to the DSO, 50 000 records (in 6 different data packages) have not been loaded (we got a dump).
Now we want to do a delta load only containing these 50 000 records. Is it possible to choose exactly which data packages to extract to the DSO? Or do you have other ideas we could test?
Thank you.

hai,
it is posible .u click the tab comes under dtp...first u click the dtp.under the delta u choose get data by request...after tat u load the data...so the data loaded package wise...if any one not loaded then only load that package only...
thanks.
prakasu.

Data retrival from PSA

Dear All,
We have SAP BW system at our place,
There was some data related issue in SAP R/3 Side due to which Daily updates were unsuccessfull.
We corrected the issue in SAP R/3 Side.
and updated data using full uopdate, This might have deleted some data due to data replication or any other reason.
Now i have reset it to delta update. and update process is running successfuly.
But now i find data for some period is missing.
Please help to resolve this issue.
Regards,
Gaurav

Hi Gaurav,
Find out selections for missing records.
If you are using an infocube perform deletion for the above found selections However if you are using an ods/dso ( in overwrite mode ) no deletion is required .
Create an infopackage, go to scheduler menu and select repair Full load:
give the selections in the data selections tab , these selections should be similar to what used while deleting the records,
Update mode Full
Start the infopackage
This is how we perform repair full request
Hope this helps
Please assign points if helpful
Manish

Data from PSA to ODS

Hi all,
I have a custom ODS that, at the moment, is filled with data coming from a standard lower level ODS.
Is it possible (and how) to insert data in that ODS directly from the PSA not passing through that standard ODS?
Thanks a lot and bye.
Gianfranco

I explain better.
My problem is that my ODS have some standard key figures that can be easly mapped.
Some others are custom and must be filled with data coming from PSA stage.
The problem is that I do not know how to retrieve the name of the PSA tables/structures on which address my routine.
Ex. ODS Warranty Header takes data from 0AU_WTY_HEADER DataSource for all its key figures. If we add a new key figure whose data must be taken from 0AU_WTY_ITEM (for ex.) we need to write a routine (I think).
The problem is that I dont know to which tables address in the PSA.
Thanks.

Issue loading data from PSA to Cube

Hi Gurus:
I have a strange issue. My DELTA load to ODS from R/3 come thru fine. However, the load fails while moving
from ODS to the cube. The error is in 'Fiscal Year/Period'. It is a straight 1:1 map in update rules. If I bring the
data just to PSA there is no error. But when the data moves from PSA to cube, one record in each of the 2
packages the valiue of Fiscal Year/Period changes from "012/2009" to "015/2009".
Any idea why this might be happeing and suggestions on How can I move this data to cube?
Thanks in advance and a very happy New Year!
Best.....PBSW

Are you using or copying Busines Content in your start routines?
In the SD data extractors, the Fiscal Year/Period was provided WITHOUT a Fiscal Variant.
In the Start Routine, the Fiscal Variant was hard coded to "K4" (I think).
If you are using the code and a Fiscal Calendar other than the Hard coded one, you might get this type of error.
If so, consider setting the Fiscal Variant as a constant in the update rules.
Good Luck,
John Hawk

Scheduling a load from PSA tabstrip

I am having load problems when trying to load to an object from a package. To overcome
I have loaded to PSA (which works fine) and then from the PSA tabstrip have scheduled a
load into the object. This works fine, is there any issues with me taking this approach?
It is only to demo the model and not the final loading model which we will look to
resolve seperately. Thanks

Hi,
No, it may have a practical side.
For example,
1. if you load data upto PSA, verify them there (probably, using ABAP program). After correcting errors you load data further.
2. you load transaction data upto PSA, then load master data and after that update data targets from PSA.
3. This is done almost always in case of using process chains.
Best regards,
Eugene

Database changes between data records of PSA

Hi all,
Does anybody know a way, how to flush or commit database change between processing each data record from PSA by transfer rules?
I have some routines in transfer rules (updating attributes of master data from datasource), where I need values from exactly previously processed data record. But SELECT from /BIC/Q... table gives me no changes of these values
Command of selection is written correctly, because it gives me new values in next run of DTP process.
And little explanation, what I'm trying to achieve:
In PSA I have account, date and value and I need count, how this value changed for a concrete day and store this value to time-dependent attribute of master data. All data records with the same key (duplicate record) overwrite the result of previously one, so only last one is stored in master data.
Shortly, I need something like aggregation ADDING of routine in transfer rule detail, but able to catch duplicate records.
Thank you for any idea.
Regards, Filip

Some note about investigation process.
I tried change my data flow and made the same transfer rules from data source to ODS, if it will behave in different way.
I have found data records correctly collected (agregated) in New data of ODS, but EMPTY in active data! So I think, the something similar happend in case of updating master data, and that's why I didn't saw any agregation.
There is no need to call-out database changes, but this problem is kind od anythink else
This shoud be for a new thread, but how can keyfigures become empty after activation?? I've searched forum and found only a case, when End routines are implemented and they skip update rules, whitch are initial. This is not my case.
Nice to hear from you any ideas. Thankx for reading.
Filip

Problem in uploading data from psa to active data and change log dso.

hi experts
my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

Uday,
Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
In case of Write optimized DSO you need not to activate it.
Regards,
Ramkumar.

Data reload from PSA problem

Similar Messages

Maybe you are looking for