Data Replication Basics missing

Hi Experts,
Im on MDG 6.1.
when i go through the blogs and forums i understood that data replication can be configured by
Step 1)
Perform ALE settings.
step 2)
in DRFIMG
- define o/b implementation
-define replication model (attach the o/b implementation here)
step 3)
in MDGIMG
-when you define business activity you mention the o/b implementation that you created above under "BOType" column.
is this all or did i miss anything else?
i have read in a forum that you also need to mention in BRF+ ->NON user agent step->Pattern 04 -> Data Replication.
does this mean if i dont mention this step in BRF+ the replication will not work??
by doing all the above does a create and a change will be replicated as and when they are occured?
Are these the same steps to execute replication for all reuse objects or do they differ?
Please help.
Regards
Eva

While configuring Data replication, Can i know in what cases we should use BRF+ -> Pattern 04 -> Data Replication(Non User Agent Step) and in what cases we should not use this???
From the previous post i understood that Data replication works "without" a non user agent step in BRF+ (Pattern 04 -> Data Replication).
i.e Approvals->Activation->Complete ->Triggers Data replication automatically??
Please, Can any expert answer my two questions above.
Regards
Eva

Similar Messages

  • Data replication monitoring on MDG flex mode objects with Information Steward

    Hi,
    I am exploring different options available to setup data replication monitors on SAP MDG custom objects(flex mode). Basically my requirement is to setup rules in SAP Information steward which identifies if there are any missing records or mismatch between the data in MDG system and the replicated systems.
    The challenge I am facing is that the tables generated by MDG framework for flex mode are not consistent and they keep changing if we change some key information in the MDG data model. Also the generated tables are not the same in each environment (like development, quality, production). Appreciate if anybody can provide suggestions on handling the MDG generated tables in SAP Information Steward.
    Thanks in Advance.
    Goutham

    Hi Abdullah,
    Thanks for your reply. I cannot write any ABAP code in Information Steward. As you mentioned I can always use MDG API to pull the active data from MDG but here I can only give the table names.
    The other option as you mentioned, using DRF I can replicate the data in flat files to Information steward, but it is not making sense as I am validating with replicated data and not with actual data available in MDG. Other point is I don't think it is a good idea to replicate all the records periodically.
    Thanks and Regards
    Goutham

  • Organization Model Before Data Replication

    Dear SRM Gurus,
    System:- SRM5.0 EBP5.5
    I am stuck in CRM-Middleware, data replication from R/3 to SRM.
    Can i still prepare ORGANIZATION MODEL, before replicating data.
    Best Regards,
    ANIL RAJPAL.

    Dear Yann,
    I have replicated Product categories from one R/3 site.
    a) Am using SRM5.0 EBP5.5, should i run report to get vendors into PPOCV_BBP ?
    b) In PPOMA_BBP - in attributes VALUE field is GREY - i cant put any entry in it ? have i missed any config ?
    Best Regards,
    ANIL.

  • Employee master data replication error

    Dear experts,
    Please help on the issue, as we are doing the UAT test next week.
    When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
    Company of employment missing for remote employee XYZ.
    We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
    But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
    Could you please let us know what went wrong, and what else to check?
    Thanks!
    Best regards,
    Wendy

    Here's some things that I would check:
    - Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
    - The assigned cost center of the employee must belong to the same company code this employee is assigned to.
    - Review the company code set-up to make sure it is complete
    - The communication arrangement to make sure it is complete

  • Difference between "Data replication", "Data Cloning", "Data duplication" and "Data Migration"

    Hi Gurus,
    Can anyone tell me the difference between "Data replication", "Data Cloning", "Data duplication" and "Data Migration". I have gone through Google but doesn't find any appropriate answer for that where I can find the difference.
    It would be highly appreciated if you give me a link for all and give me some point out.
    Thanks & Regards
    Nimai Karmakar

    Here is how I see the terms used and understood by most folks
    "Data replication"
    This is the keeping the same data in sync in 2 different databases.  Replication is the process of keeping data in sync between 2 environments/databases and not limited to Oracle to Oracle, it could be Oracle to MySQL to be kept in sync, MySQL to Oracle, Oracle to SQL Server, SQL Server to Oracle.  The purpose of keeping data in sync can vary, but that is basic description of what it is.
    "Data Cloning"
    Make a copy of the data/database from one database environment to another, like for example taking production database and cloning the database to a pre-production database/environment for testing.  Coning term is used more when copying a database not just data, but the whole database so typically you hear the reference "Database Cloning", but data cloning is basically the making a copy of the data from one place to another.  Sometimes Cloning and Duplicating are used in the same way by folks as the basic end result is the same you are making a copy of the data to someplace else.
    "Data duplication"
    This is typically term when duplicating the data from one environment to another for a particular purpose, a lot of folks use "Data/Database Cloning" and "Data Duplication" in the same context, meaning they use them to mean the same thing, but I see more difference in the terms so when they are different Data Duplication is done when combining 2 databases to 1 therefore you can not clone the 2 databases into one so this term would be used more in those circumstances.
    "Data Migration"
    Moving data from one location/database to another location database, for example moving from MySQL to Oracle you would do a data migration from MySQL to Oracle as you are moving the data from MySQL to Oracle and going to leave it in Oracle.  You could also be migrating to from Oracle 10g environment to a new Oracle 11g environment, therefore "Migration" is typically used when referring to moving the data from one environment to another and the source and target are different in location, database vendor, database version.
    These are very simple ways of looking at the terms from my experience on how they are used.

  • Data package is missing in the return structure

    Hi BW Folks,
    I have an issue with ODS activation.While activating the data in ODS object am getting following error message
    Activation of data records from ODS object XXXX terminated.
    data package XXXXX contains errors with status 9 in table 'XX' but this data package is missing in the return structure.
    In detail: The data package is entered in the return structure as incorrect.
    Can anyone provide me the solution. Thanks in advance. Have a nice time!
    Regards,
    Nani.

    HI
    Check these links
    Re: Status 9 error when activating an ODS in a Process Chain
    ODS activation error - status 9
    Error while data loading-terminated with Status 9
    Error while data loading-terminated with Status 9
    hope it helps
    regards
    CK
    Assing points if usefull

  • Integrated Planning - trying to load data from basic to realtime cube

    I have created a mulitprovider for my basic and realtime cube, and trying to copy data from basic to realtime using standard copy function in IP. It is not erroring out but data is not getting copied either. Both cubes having exactly the same structure. I can do a export datasource or a BPS multiplanning area..but I need a solution in IP..Any help would be appreciated...Thanks much..

    Infoprovider --> Multiprovider
    Agg Level --> Selected fields need to be copied
    Filter --> None selected, wanted to copy as is
    Pl. Fnc --> Standard Copy.
                    char usage: Selected infoprovider for 'changed'
                    to parameters: selected all key figs ( percent and amount)
                    from and to values: Basic to realtime
    Let me know.

  • My data tab is missing in settings on ipad

    My data tab is missing in "settings" on my ipad

    What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

  • Some of my movies in iPhoto say a necessary data reference is missing.  What is that?  We upgraded to Lion, so is that the problem?  I saw that I need Quick Time 7 - but I think I have 10

    Some of my movies in iPhoto won't play.  It says a necessary data file is missing!  What is that? 

    Some of my movies in iPhoto won't play.  It says a necessary data file is missing!  What is that? 

  • The Boot Configuration Data file is missing requires Information

    My ideapad U310 doesn't boot any more after the boot procedure was interrupted by power outage.
    A blue screen shows the following:
    Recovery
    Your PC needs to be repaired
    The Boot Configuration Data file is missing some required information.
    File: \BCD
    Error Code: 0xc000000d
    You'll need to use the recovery Tools on your installation Media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
    Press ESC for UEFI Firmware Settings

    I can only make one suggestion. Boot from usb Recovery flash drive and hope that the startup repair will do their magic to your unit.

  • HP Stream 7 The boot configuration data file is missing some required information

    I have an HP Stream 7 tablet.  When I open it up it shows a blue screen with the error "The boot configuration data file is missing some required information."  Can anyone help as I can't get into the tablet to solve the error!

    Hey @PaD2 ,
    Welcome to the HP forums.
    I understand you're unable to boot up your Stream 7 tablet.
    Try accessing the recovery partition by holding the volume down button and power button at the same time. Please excuse my ignorance, as exact information on accessing the recovery manager appears to be unavailable for this exact model. If the down button doesn't work, up should get you in.
    Once in the recovery manager you should be able to select Troubleshoot > Startup repair. 
    If the startup repair does not fix the issue I would suggest trying the full system recovery option, which you should find under Troubleshoot > Advanced.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • ERROR PROCESSING FILE "5016: A mandatory data element is missing"

    B2B errors while processing file, following is from b2b.log...
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>0A0101461190FFFF40D0000017918FE0-1</b2bMessageId>
    <errorCode>AIP-51505</errorCode>
    <errorText>5016: A mandatory data element is missing.</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (falken8.falkentire.internal)
    Segment GS(Functional Group Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 1{br}{tab}Character: 105 ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    <errorDetails>
    <parameter name="InterchangeControlStandard_RepeatingSeparator" value="U"/>
    <parameter name="InterchangeTrailerControlNumber" value="000000862"/>
    <parameter name="InterchangeChildCount" value="1"/>
    <parameter name="InterchangeTime" value="1205"/>
    <parameter name="InterchangeUsageIndicator" value="P"/>
    <parameter name="ErrorScope" value="Interchange"/>
    <parameter name="SubelementDelimiter" value=">"/>
    <parameter name="RepeatingSeparator" value=""/>
    <parameter name="InterchangeSecurityInfo" value="Y "/>
    <parameter name="InterchangeReceiverQual" value="12"/>
    <parameter name="DecimalSeparator" value=""/>
    <parameter name="InterchangeAuthorizationInfoQual" value="00"/>
    <parameter name="ElementDelimiter" value="*"/>
    <parameter name="InterchangeComponentElementSep" value=">"/>
    <parameter name="InterchangeControlVersion" value="00401"/>
    <parameter name="InterchangeAckRequested" value="0"/>
    <parameter name="InterchangeSenderQual" value="08"/>
    <parameter name="InterchangeReceiverID" value="6262810170 "/>
    <parameter name="ReleaseCharacter" value=""/>
    <parameter name="InterchangeDate" value="080321"/>
    <parameter name="SegmentDelimiter" value="
    "/>
    <parameter name="InterchangeControlNumber" value="000000862"/>
    <parameter name="InterchangeAuthorizationInfo" value="X "/>
    <parameter name="InterchangeSenderID" value="9252671859 "/>
    <parameter name="InterchangeSecurityInfoQual" value="00"/>
    </errorDetails>
    </Exception>
    We are using EDI X12 over generic exchange. I double checked ecs file and data file. Passing all the mandatory elements. Also checked the delimeters and they match from datafile to setup.
    Anyone have faced this error before? We opened a SR with Oracle and they are not able to figure it out. Please help.
    Thanks
    Venkat

    Ramesh,
    To give you a little background I used Spec Generator functionality to create ecs from dat file. Then I did an export to OracleAS Integration B2B format which generated xsd file. I also analyzed (using preprocessor) giving both ecs and dat file and it passed with no errors.
    Following your suggestion I now excluded ISA/GS guidelines from the ecs file, exported to xsd and tried to process the dat file, and it gives following error messages now...It doesn't even identify the trading partner now. Please advise. Thanks
    Description: Unable to identify the document protocol of the message
    StackTrace:
    Error -: AIP-50083: Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:2619)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1365)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
         at java.lang.Thread.run(Thread.java:534)

  • Failure in the SOAP Runtime: Employee Master Data Replication Using IDoc OTM_EMPL

    During employee master data replication from ECC to CfTE, we encountered the following error:
    Unexpected element -el=OTM_EMPL ns=urn:sap-com:document:sap:idoc:soap:messages
    We are using the 1402 WSDL for Replication of Employee Master Data with Employment Details (humancapitalmanagementmasterd2). The payload was not received in CfTE.
    Can anybody please advise how to resolve this issue?
    Thank you.

    Dear Joselito,
    This issue need deeper investigation in customer system.
    Kindly report an incident for SAP Support for further help.
    Regards,
    Rahul Mishra

  • ONLINE DATA REPLICATION ONE DATABASE TO ANOTHER IN ORACLE 9.2.0.1

    I have used Oracle 9.2.0.1 version. I have created two database(ORCL, ORCL2).
    in my PC. I have created INV user in both database. Currenly I have worked on INV user which is in ORCL database. Is there any technique in Oracle 9.2.0.1 online data replication from One database to another. i.e. If at any point of time my ORCL database is damaged my INV user has been recovered in ORCL2 database.

    What do you mean by 'Online Data replication'? Do you mean the Oracle Advanced Replication or do you mean the Oracle Dataguard?
    Oracle Data Guard Concepts and Administration
    Release 2 (9.2)
    Part Number A96653-02
    Oracle9i Advanced Replication
    Release 2 (9.2)
    Part Number A96567-01
    ~ Madrid

  • Data replication and synchronization in Oracle 10g XE.

    We are trying to do data replication and synchronization sort of thing for all our servers. We are using Oracle 10g. XE. I guess there are some features in oracle already for replication but I am not very sure about them.
    To explain it more clearly - we will have individual database servers in our sub-divisions and then divisions and centers and then main server. We need to synchronize at various levels. So If any body is aware of any techniques, please let me know.

    Hi,
    Could you tell me what exactly synchronisation your talking about..?
    we will have individual database servers in our sub-divisions and then divisions >>and centers and then main serverIf you have mulitple DB servers then you can connect it by DB links. also if you are talking DB synchronisation then you can have Triggers,Materialized views.
    we also have two independent severs which are synchronised(atleast schema levels).
    Regards!

Maybe you are looking for

  • SAP starting problem

    iam starting sap db through startsap or startdb commands it is showing following error. but database is starting in sqlplus prompt using startup command.how can i start the sap.the error is cat startdb.log Thu Nov 27 12:36:04 IST 2008 LOGFILE FOR STA

  • Payment Advice Account Type

    Hi, I want to ask when should the Account Type be set to S (GL Account) when creating a payment advice using transaction FBE1. Thanks

  • Best practices for maximum performance of C# CLR scalar UDF in View

    Can anyone give some tips for best performance of a C# CLR UDF on SQL 2008 R2 or SQL 2012? Including maximizing the performance of the transition to CLR. I am using it in a View.  E.g., create myview (id, name, address) as select id, dbo.MyUDF(name),

  • Plugin causes fatal error

    running nt 4 platform with plugin 1.4.2_01. The java plugin causes a fatal error when attempting to view an applet in netscape 6+ and IE. If netscape communicator 4.74 on the same system does not have the same problem. Applet can be viewed ok. The er

  • OSB Load Balancing

    Is there any way to load balance a proxy service in OSB? For my project, I have an http/wsdl based proxy service that is transforming a pretty large message and routing it to a business service based on a jca adapter. If I monitor my cluster(2 nodes