Data replication from R3 to CRM

Hi Experts,
My requirement is to fill the Category field of CRMD_ACTIVIY_H table in CRM with the BSARK field of VBKD table in R3.
For this I have tried to implement the logic in the method CRM_DATAEXCH_R3D_MBDOC_FILL of BADI CRM_DATAEXCHG_BADI, but unfortunately I cannot find any data in CT_BUS_TRANS_MSG-ACTIVY_H.
Please advice how to proceed in this regard.
Thanks in advance.
Regards,
Rakesh

Hi Gabriele,
I am able to debug the my implementation of BADI CRM_DATAEXCHG_BADI but i am not able to find any data in the internal table CT_BUS_TRANS_MSG-ACTIVY_H where we need to fill the actual category field data from BSARK field.
I am able to get the BSARK data in this BADI but the problem is i cannot find any data in the internal table CT_BUS_TRANS_MSG-ACTIVY_H where we need to update the category field with the data of BSARK field.
So could you please let me know where actually the ACTIVITY_H table gets filled.
Thanks & Regards,
Rakesh

Similar Messages

Master data replication from R3 to CRM

i have pulled the master data from R3 to CRM .data is showing in table but000 and crmm_but_custno but it is not showing in the BP transection.
when i am searching in BP it is not showing but i can see in the table(but000 and crmm_but_custno)
What should i have to do .
Pl suggest !!!!

Hi sunil,
while searching for data in BUT000 are you searching based on BP number or content of the table? At the same time while searching with TCODE - BP on what basis you are searching?
If the data is replicated into the BUT000 it should come out with the T-Code BP also. For your problem there will be 2 possibilites.
1) the data is not at all replicated and you may looking at the old data.
2) Due to improper number ranges for R/3 and CRM eventhough the data is replicatd into CRM you can't find it because it taken some other number range.
For ex: you have created a Customer in R/3 i.e 5000456, when replicated it will take some othe number XXXXXX.
So, while searching with BP T-Code search data on the basis of first name, last name or searchterm instead of BP number.

BP Relationship Replication from Mobile to CRM

Hi Guys!!!
What are the settings required for BP relationship (Ex. : Contact person) for replication from Mobile to CRM? Can someone explain step by step process for the same.
Thanks & Regards
Mukta

Thank you for your reply Garcia, but isn't that for a Business Partner as a Customer? We don't have a Customer. I'm maintaining the business partner in the "Business Partner (Gen)" Role.
I still went ahead and made the settings you suggested but it still doesn't get replicated. I did notice though that the entires in the table are not the same as what show up in the Control tab in the BP transaction.
For eg. Control Tab has Text ID : 0001 as "Correspondence" where as in the table V_CRMTXTID the TextID:0001 is "Sales note for customer".
In transaction PITX I don't get to pick BUT000 as the R/3 Object. Is there a different transaction for Notes at Business Partner level? Do you know what is table CRMC_TEXT used for?
Thanks once again.

Customer Master Replication from R3 to CRM

Hi Experts,
I am going to replicate Customer master from R3 to CRM system.As we all know ECC or R/3 and CRM customer master data is based on two different data models. So in order to avoid the Errors I would like below clarifications cleared.
1- I would like to have customers to have all partner function assignments (Sold-to, Ship-to, Bill-to and payer as in R3 ) to be replicated in CRM. How can I achieve this?
2- As it said R3 Account Groups are mapped to Customer Clasification(i.e Customer,Prospect,Competitior,Consumer-Person,Consumer-Organization). How can I map Sold-to Party, Bill-to Party, Ship-to Party and Payer BP Roles to the classification Customer?
During the test replication all the customers from R3 got replicated as Sold to party ion CRM in my last attempt.
I request you to provide me the Mapping concept and as well as the solution to have this replication achieved successfully.Any Document with screen shot would be a great help.
Regards
Arup

Hi Friends,
I am using CRM 2007.
I also facing same problem. All are my sold to party, ship to party, bill to party and payer are replicated to CRM as sold to party (CRM000) BP role only.
So, if you find any solution kindly, share.
Thanks & Regards,
Rajagopal
Chennai - INDIA

How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Contract replication from ISU to CRM

Hi Experts
I have sucessfully replicated BP master data between ISU and CRM, Contract Account replication is done as well, i would like to replicate Contract from ISU to CRM. Any help will be highly appreciated.

Hello,
Please see note 632749 for help with this issue.
Please also check the foloowing points:
1. Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
2. Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
3. The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
I hope this is helpful.
Regards
Olivia
Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

Equipment Replication from ECC to CRM 6.0

Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.

Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help!

How to read and display table data entries from ERP in CRM

Hello experts,
I am new to CRM. I need to read data base entries from ERP in CRM system. What would be the best way to do . The table is a standard SAP table with a custom include (several customer fields). Calling a web service would be the best way..? or is there any other way that I can do it too.
Also, to display these entries what would be the best tool? Should I built my own transaction/report to do it?
Any advise or guidance would be a great kick start to learn the CRM development environment.
Regards,
jaffery

Hi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant

Problem in data transfer from BW to CRM

Dear Guys,
I am facing one problem when i am tranfering the data from BW to CRM system (using Analysis Process Designer).
When i am transfering data from standard ODS, data has changed properly.
But in custom ODS, data has not changed.
In both part, upto aggregation data has come.
Any thing i have missed out in custom ODS.
Please anybody give inputs.......
Thanks in advance.
Regards,
Vivek.V

Hi Vivek,
There is no special process for this cube load. Just check the job log and check for any short dump in R/3 while running the extractor.
I checked the datasource help link for this cube but there is nothing special mentioned:
http://help.sap.com/saphelp_nw04/helpdata/en/da/f7bc3961d4f339e10000000a114084/content.htm
Bye
Dinesh

Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.

Hi,
While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT).
I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data to CRM.
Here I am getting status of equipment from R3. Now how do I update the status in ct_bus_trans_msg.
I need to update ct_bus_trans_msg-ORDPRP_OBJL_I_D-IOBJECT_ID.
Thank you.

Hi,
Internal table ct_bus_trans_msg have several segments.
These segments are similar to Bdoc meaasge.
There is segment called STATUS_H. You need to populate this segment with status form R/3.
Please reward points if useful
Murali

HR Master Date replication from HR to SRM

Hello,
can any one please give me some input about how the replication done from HR to SRM system. what is the Basic and message type used for this replication and which program trigger from HR system to replication an organization data?
thanks,
john.

Hi John,
HR replication from R/3 to SRM is carried out by following these steps:
1.) setting up the distribution model in SRM and R/3 for message type HRMD_ABA. You can set up number of filters in this message type, where you define HR infotypes, subtypes, object type and so on.
2.) Once you set up the distribution model, distribute the model.
3.) Report RHALEINI is used to replicate the distribution model from R/3 to SRM in the insert mode. (You can also use transaction code PFAL).
4.) Ongoing replication if performed in the update mode from R/3 to SRM will cause problems of users being broken in sporadic cases. It is advisable to use change pointers from BD14 to perform the ongoing replication.
There is an SAP docuemntation of EBP transports which explains in detail the replication. Hope this information helps.
Please assign points for usefull answers !!
Sundeep

Data retraction from BW to CRM

Hello All,
I would like to get your expert suggestions in one of the below scenario:
1. We have customer sales information in a info cube which is coming from ECC. Now we need to send this customer sales information to CRM (Ztable) system.
2. As we can't replicate all business complex calculations, we can't get this information directly in ECC system. Hence we can't avoid intervention of BW system.
Hence the data flow looks like ECC-> BW-> CRM on monthly basis.
My questions are :
1. What is the best possible way to send data from BW to CRM.
2. What all are developments needs to be done in BW & CRM (In CRM we need to push into a custom table).
Thanks in advance.

Hello All,
We have an option called RFC destination and DB table as destination for Info spoke. I have give CRM system details (which is connected with BW system) and I stuck up with the following error.
Error: SYSTEM_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target
Function module "RSB_API_OHS_3RDPARTY_NOTIFY" not found.
Please let me know is there any settings missing.
Regards,
Venkat

Data transfer from BW to CRM using infospoke.

Dear All,
I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
Can someone help here ?
Thanks,
Mukund.

Dear All,
I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
Can someone help here ?
Thanks,
Mukund.

Data Flow from BIW to CRM

Hi all,
It is possible to get all data from BIW to CRM.
Scenario: all transaction and master data is maintaining in the external system and all data extracted in to the BIW for reporting can we take data in to CRM server to perform certain activities in CRM.
If possible what setting i have to do in CRM.
Thanks and regards
Apoorva Asthana

HI
using APD we can extracting You must create an analysis process for a data mining method to train a data mining model. The purpose of training a model using historic data is to allow the model to learn from the historic data. The training result can then be used for a prediction or in the operational system. You can create a training process for the data mining methods:
You can transfer the values determined in the SAP BW to SAP CRM and place these values in attributes u2013 essentially business partner attributes in the Analysis Process Designer
pls go through this link
http://help.sap.com/saphelp_nw04/helpdata/EN/6e/86833ceb3d062de10000000a114027/content.htm
thx
vijender

Customer replication from ECC to CRM

Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PM

Hi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai

Data replication from R3 to CRM

Similar Messages

Maybe you are looking for