Data requirements for xpeira neo v ICS update

Hi all, I'm from India and planning to update my Xperia Neo V ICS today. So I would like to know how much data has to be downloaded to update successfully. Thanks

update with SUS, it is better....
http://www.sonymobile.com/global-en/tools/update-service/
For better performance, Suggest you to Format your SD card and uninstall every single app that was on GB and reinstall it with fresh updated applications from Play Store after upgrading to ICS.

Similar Messages

Xperia neo v ICS update problem.

Xperia neo v ics update is available for india.
I am in b/w update process seems like it stuck at 2. Preparing - initialising... from n hour.
Tried again but still facing same prob.
Solved!
Go to Solution.

Many are facing this problem but for many it has been sorted out,, please have patience,, servers are overloaded. you will get the update
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

You do not have permissions to access a database that contains data required for this form to function correctly.

I have dropdown on infopath form , and it receives data from sql server table , it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
i am getting this
You do not have permissions to access a database that contains data required for this form to function correctly.
Can you please help?
Thanks,

try this one, if not yet
Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library). See if this works without any other changes, but if not, then...
Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created.
For Type, use NTLM.
Ensure the user has rights to access the database
Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
Also check this post having the similar issue:
http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Master Data Required for 2LIS_02_HDR Data Source Installation

Hi All,
We are trying to install 2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
Aditya

Hi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK

Neo V ICS Update via Bridge for Mac on Snow Leopard

I am trying to update my "neo v" via "bridge for mac" on my mac mini (10.6.8 - snow leaopard)
I am connecting in MSC mode as Phone is not detected by Bridge in MTP mode
In MSC mode I do get the notification for ICS update however, after the Prepare stage it asks me to switch to MTP mode.
I do so and nothing happens.
I disconnect and try to reconnect in MTP mode and nothing happens
Please help/advise

Please check this thread for a possible fix for this:
http://talk.sonymobile.com/message/185965#185965
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Master data required for implementation

Hi all,
We are going for a university implementation. Could someone tell me what master data is required for implementation from client. Like student data, learning content data, grading system,
My next question is which third party tool is good for library management & class and exam scheduling.
Thanks
Ravi

Hi Vinod,
I need some information about the implementation of SLCM. I have found some standard documentation about the functions it offers, but they usually give an overview. I couldn't access any information on issues such as the technical prerequisites or how to implement it yet.
As no such project has been implemented in my country, I'll keep on doing research online. If you have any documents that would be useful to implement or at least to understand the implementation process of SLCM, they would be of utmost value for me.
Thanks in advance
Aslı

Test Data Required for Bapi's

Hello All,
I am a newbie to SAP.
I have been tasked with finding the test data for a few BAPi's but have been unable to do so on my own.
I have tried using the respective transactions to find valid test data and have looked at all the imports, tables in the given bapi but have been unable to find the required data.
I am working on ECC 6.0.
I ask all the learned folk out here to please lend your expertise.
The list of BAPI's are :-
1. BAPI_FUNCLOC_GETLIST
2. BAPI_CONTROL_RECEPIE_GET_LIST
3. BAPI_PROCORDCONF_GET_HDR_PROP
4. BAPI_PROCORD_GET_LIST
Edited by: aashrith on Nov 13, 2011 5:03 PM

I suspect that they want you to build some test data rather than find some. And for what you need, there is a lot of master data required. It may or may not be there already, but the task you have defined is not that simple as one or two posts would be required. I would google "SAP PPPI test data" or something similar. You will probably find simple lists of tasks to build a sample Control Recipe or Process Order.
Regards,
Mike

A database that contains data required for this form to function correctly cannot be found?

Hi,
In my scenario, i m trying to pull out data from sql server using windows authentication and display in infopath form.
I set some rules in textbox control change that retrieve data from sql database.
and I have enabled cross domain data access for user form .
and i have stored the connection file into the connection library and i have approved.
The form working fine in server (browser), but whenever i m trying to open the form in client browser i m getting the below error.
please assist me to resolve this error.
venkateshrajan

Hi,
Please make sure following options are enabled in Central Administration > General Application
Settings > InfoPath Forms Service > Configure InfoPath Forms Services.
1) Allow user form templates to use authentication information contained in data connection files.
2) Allow cross-domain data access form user form templates that use connection settings in a data connection file.
(-This you have done)
Do you use host name to access the data source? If yes, please
check of the DisableLoopback check is enabled. Please make sure the loopback check is disabled on all SharePoint servers and reboot server to test if it works.
http://support.microsoft.com/kb/896861
Please refer this link with similar problem
Hope it helps!
Thanks,
Avni Bhatt

Maps not working in my Neo after ICS update

If I open Maps in my phone. It does not load the map properly even though I am in Wifi and later on it says Maps not responding, do you want to wait or quit!!
Is anybody else also having this problem?
Yesterday my Wifi was also behaving wierd. It was not able to establish proper connection with my router but finally when I turned off my phone and swithced it on, it got rectified.
Regards
Ramanath

Go to Play Store, search for Google Maps and see if there's any updates available. If there is, install it and then start Maps again and check if the problem is gone.
If there is not update available, go to Settings > Apps > Manage apps > Google Maps > Uninstall updates. If 'Uninstall updates' is grayed out, tap on clear data instead and then try the app again.
Let me know.
What do you think about this forum? Let us know by doing this short survey.

Data Required for E-TDS from SAP to Excel

Hellow Gurus
My problem is that we want to extract withholding data like official keywise,periodwise ,base amount wise ,tds amountwise, from sap to E-TDS .
plz advise me which T.code &how to extract .
Urgent plz
Thank Q for Advance
Kumar

hi Kumar D
try with Tcode "S_P00_07000134 - Generic Withholding Tax Reporting" to get the detail.
regards
Satish Karanth k.

Reg : data required for the fields to be filled

Hi all,
From a non sap system a purchase order is coming to sap system where the sales order is getting created .Standard SAP IDOC Message type: ORDERS (EDI-850)
Standard SAP IDOC type: ORDERS05
but for the sap idoc type orders05 the segments need to be filled up .such as E1EDKT1/E1EDKT2, E1EDK02 QUALF: '001' ,E1EDK14 QUALF: '005' ,E1EDK03 IDDAT: '022' and many other segments are there .in each segment there are several fields .i need to fill these fields and click on standarad inbound and see if sales order is getting created or not . thanx in advance ............

problem solved

How many revolutions of data are required for order analysis?

Hello,
I have a requirement to collect, process, and save data for several hours at a user specified sampling interval. I suspect that I will need to use the speed of the motor to determine how many revolutions of data I am collecting.
Is there a minimum number of revolutions of data required for order analysis?
Thanks,
Chris

HI Chris,
Thank you for posting on the National Instruments forum. To determine how many revolutions of data that you are collecting, you will need to use the tachometer signal that is coming off of your motor and is defined as pulses per revolutions. With this, the absolute minimum that you need is two pulses to figure out how fast your motor is spinning. With only two pulses, however, it will be very hard to determine the order information.
I think this KB will help you in figuring out what Window Length you need when doing order analysis.
How to Select the Window Length When Extracting Orders with Order Analysis
Please let me know if the knowledge base article does not contain the information that you are looking for.
Thank You,
Nick F.
Applications Engineer

Update download speed requirements for ipad 2

Does anyone know what the update download speed requirements for the 4.3.3 update version is? My connection keeps timing out and my internet company says everything is within expected range on their end.
Thanks.

Temporarily disable your Anti-Virus and Firewall software.
Download the update.
Re-enable the AV and Firewall software.

Requirements for IDOC

Hi friends,
Could you please tell me the details required for doign a IDOC scenario.
I want the details seperately when IDOC is a sender and also when IDOC is a receiver.
Note: High reward points for the reply

HI
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Idoc creation
IDOC Programming
There are two processes in IDOC processing one is INBOUND PROCESS( IDOC coming to the system and its handling at various stages) and the other is OUTBOUND PROCESS( IDOC is send to other system . Separate ABAP programs are written for these 2 processes and different configuration settings are required for each one .Depending upon the trigeering mechanism different programming approaches are used.OUTBOUND PROGRAMS handle the IDOC creation and INBOUND PROGRAMS handle the inbound IDOC and the data trasfer from the IDOC to the database tables.
The basic structure of all outbound programs is same. The CONTROL
record which is of TYPE EDIDC has to be filled. It contains important fields like
IDOCTP IDOC type
MESTYP Message Type
RCVPRN Recieving Partner (Destination)
RCVPRT Partner Type (it is LS i.e Logical System)
The DATA RECORD internal table which is of TYPE EDIDD has to be filled
in the same order as there are segments in the IDOC definition.
It has 2 important fields which are to be filled ,these are
SEGNAM Name of the segment
SEGDATA Data in the segment and can be upto 1000 bytes.This field
is corresponds to each data segment in the IDOC.
e.g.
DATA INT_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA W_SEGDATA LIKE zsegment "custom segment zsegment
INT_EDIDD-SEGNAM = 'ZSEGMENT'
W_SEGDATA-field1 = value "taken from some table
W_SEGDATA-field2 = value "taken from some table
INT_EDIDD-SEGDATA = W_SEGDATA
APPEND INT_EDIDD
This will fill the data record corresponding to the segment ZSEGMENT . For all
segments the sam steps will be repeated until all the data corresponding to all the
segments in the idoc is filled in the internal table of type EDIDD.
There is only one control record and can be multile data records in the idoc
structure.
Which data is to be extracted from the tables to be filled in EDIDD type internal table is determined in standalone programs from the objects which are specified in the selection screen and from the object key passed to the function module in case of message control and is taken from BDCP table in case of change pointers using function modules "CHANGE_POINTERS_READ"
In case of stand alone programs and function modules based on change pointers method the function module "MASTER_IDOC_DISTRIBUTE" is used to send the IDOC to ALE layer for distribution ,in case of message control it is handled automatically by the RSNASTED program invoked by the message control.
You can get the all description from below tcodes
WE60-> Documentation for IDoc types
WE09-> Search for IDocs by Content
BD87-> Status Monitor for ALE Messages
WE63 -- information about Standard IDOC in R/3
WE64 - Details about process codes
WE82, WE30, WE31 -- IDOC Types.
SAP R/3
R/3 to XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
XI to R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1) ( Create port to get IDOC Meta data from sender system)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) (To maintain IDOC Metadata, it is needed by XI because XI needs to construct IDOC-XML from IDOC. It is not needed by any sap system).
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
Details ABT IDOC??????
1)Use WE60 transaction.
2)you need list of basic type idocs then use t.code WE60.
To display IDOC list in particular time intervel use we02 or we05.
where u can find the outbound and inbound processing idoc's.
use t.code 'wedi' to get more information on idoc's.
3)You can use the WE60 for Idoc Documentation
& we can use WE30 for Idocs list
Refer the below links for furtehr assistance
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
cheers

Data requirements for xpeira neo v ICS update

Similar Messages

Maybe you are looking for