Data rescue II don`t work

Hello, I want recover lost archives, data rescue foud this archives but I can`t recover because when I attempt the program say:
the destination you have chosen is part of the scanned drive or volumen
Writing there could cause loss of the data you are trying to recover. Please choose another destination
And I can`t recover my files . I haven`t any other computer or hard disk for to transfer the dates .
How can tranfer my dates of Data Rescue to my computer or to CD/DVD?
Thanks.
Message was edited by: Dalanina

Dalanina wrote:
I tried with dvd , data rescue don`t permission record dates in a dvd .
Because the usual way OS X records to a DVD is to make a hidden file with the contents of the DVD or CD. When you copy your material to the DVD or CD image, you're really copying to the hidden file. It's only when the computer actually burns the disk that it actually copies anything to the DVD or CD disk. Until then, all your information is still on your startup drive.
It would work a pen drive?
Yes, a USB pen drive should work.
charlie
charlie

Similar Messages

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

If you don't have a rescue email address (or you do but aren't the receiving the email to it) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Will Data Rescue II Mac work on Leopard?

I use a G4 Mac QuickSilver 2002; run Leopard, Tiger, & 9.2.2. Will ProSoft Data Rescue II work on Leopard?

According to this NO...
http://www.bhphotovideo.com/c/product/515297-REG/Prosoft_25100_Data_Rescue_II_Em ergency.html
But I'm confused, I never bought DR3, but thought I did buy DR II, even though it says it's Data RescueX, & includes Data Rescue Classic for OS9!???
Hmmm, from this it appears that DRII came after DRX...
Supports 10 times more file types for content scans than Data Rescue X
Optimized for Tiger; runs on Panther and Jaguar
http://www.amazon.com/ProSoft-Data-Rescue-Mac-VERSION/dp/B000BFHFXO
So, all I can say is the earlier version or DRX does run on 10.5.8
http://www.amazon.com/ProSoft-Engineering-Data-Rescue-X/dp/B0000AQJ27
I'd fully expect a later version, as DRII should also work in 10.5

"List Data Sets" don't work

Hi all
I created the VI with SVE.
The data I can write and read.
But the List Data Sets.vi don' show out data.
Why?
Respect.
Iskander
Attachments:
Test_DSC.vi ‏11 KB

Hi
Thanks all.
I log in Citadel the Double and Boolean data.
I can view this data in MAX.
I want use the "Read Data Set Run by ID.vi" in my project.
Best regards
Iskander
Attachments:
analog.png ‏25 KB
Alarm.png ‏28 KB

Using Data Rescue II to recover lost files from corrupt hard drive!!!

OK I am terribly confused. I found out my MacBook Pro hard drive is corrupt and I can't even start up my computer. I was told to get Data Rescue II, another Mac, and an external hard drive.
I have all of the above but have no idea how to make it work!! How do I access the corrupt HD on the current iMac I am using with Data Rescue and then transfer the found files to the external HD??? Please I need help asap!!

First, if you have an external drive, then install OS X on the external drive. Boot from the external drive, install Data Rescue, then run Data Rescue and see if you are able to recover any files from the bad drive.
You boot from the external drive by restarting the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the external drive then click on the down arrow button.
If you do not have an external drive then you can try connecting the two computers with a FireWire cable and booting the computer with the bad drive into Target Disk Mode. Boot the good computer normally. Install Data Rescue and run it to see if you can recover anything from the bad drive. My guess is this method will not likely work, but one never knows without trying.
BTW, have you tried the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Data Rescue II and my HD

When I updated my G4 to Leopard, I did a clean install on a new drive. When finished I took the old 120 gig drive that came with the machine and hooked it up as an external to remove some data. That process corrupted the drive and it's not recognized except as a drive needing initializing. There is no click of death on the drive, it spins up and seems to work just fine. The OS sees it as a 1.1 terabyte blank drive (I've been putting in drives and externals for 30 years, and this is the first time I've ever had a problem).
So the only data that wasn't backed up was hundred of CD's that were imported as mp3. While this could be done again, it's a LOT of work. (Yes, I know about backup and my personal machine is backed up daily, but this was a department machine at my school...)
Yesterday I downloaded Data Rescue II -- it saw the drive as a 1.1 terabyte drive and said it would take five thousand hours or something to look at it. I let it run all night and stopped it this morning after it had done around 140 gig of my 120 gig drive (???). I let it go a few more hours to show what could be recovered and it found quite a bit (considering it had only done about 140 gig of the 1.1 terabytes that this 120 gig drive has....)
So here's my questions:
1. what makes the drive appear to be a 1.1 terabyte drive? (my suspicion is that the electronics on the drive got trashed, not the platers/heads or anything physical)
2. while I don't recall exactly, the list of files that could be recovered included stuff like File001, File002, etc. If those WERE the mp3's and they would have to be identified and re-named, this isn't something that could easily be done and it's probably faster to start over importing into iTunes. Is this a typical end result as far as file names? If I let it go five thousand more hours would I be looking at actual file names (Beethoven - Symphony No. 1 1st movt) or would it always be File004, or would it just depend?
I'm reluctant to spend the money to purchase Data Rescue if all I get are unusable file names since that's of no help.
Someone also suggested I might find a matching drive and switch the electronics and give it a try, but haven't found one yet.
Any help or suggestions welcome.

The hatter wrote:
The case you bought may not be supporting Leopard, I had one old FW case from my G4 MDD days that was like that. Just get a new OWC Mercury case, or for an emergency, an adapter.
Case not support Leopard? That's the dummest thing I ever heard!! And it turns out to be correct. The case was part of the problem.
Other part of the problem was on of the pins on the HD connection was slightly depressed (didn't notice it at first) and once I pulled the pin back up into position, my Leopard machine did see the drive as the right size, but coudln't do anything with it. My wife's older Tiger machine read the drive just fine and all the stuff is right there.
Sometimes (maybe all the time?) it seems to me like Apple is designing their software so that ONLY hardware with a little white apple on it will work

Need to rescue Garage Band Files with Data Rescue II - what kind of files?

Hi all -
After a particularly gruesome computer crash, I am trying to reconstruct my lost files using Data Rescue II..... This program goes into the damaged hard drive and downloads all intact files it can find, but it is NOT able to label everything correctly. All it can do is divide things into folders - Audio files, document files, images, mail, misc., and movies. And within these folders are other folders - for instance, in the "Audio" rescued folder, there are hundreds of AIFF files, AIFF1 files, AIFF2, MP3, WAV, m4a, and m4p files.
My question is: can someone please tell me what the heck a Garage Band project file is? That would save me a lot of time in digging through all this material trying to find one....
(Don't get me wrong... I'm grateful to have stuff to dig through! I just hope my Garage Band files are intact and recoverable.)
Has anyone had success saving Garage Band files with Data Rescue II?
Thanks in advance.

Aaaagh!
I spoke too soon. Yes,I did indeed find the file that contained all the files I needed to retrieve (using Disk Rescue II). When my 6-hour download of the 78 GB folder finished, I check the files again, and they weren't located in the orphaned section, but in the Hard Drive section under the normal directory, in a folder called .Trashes - within that there was another folder called "501", which contained all the Garageband files I needed to retrieve. However, when I tried to open the downloaded "rescued" files, they were inside a folder called "Macintosh HD", which could not be opened, and I got a message that said "Could not be opened because you do not have sufficient access privileges." Not only that, but even after 6 hours of (apparently) downloading the 78 GB folder, my hard drive, which had close to 83 GB of free space, said STILL had almost that same amount.
So did it download anything or not? What was it doing all those 6 hours? I have a file that I can't open, but apparently it's going to be empty anyway.
Here's the full story, for anyone with the patience to listen and offer advice. It looks like now I'm looking for a way to 1) get the permissions to open the .trashes file so that I can download everything, or 2) figure out a way to get Disk Rescue II to open the files and download them regardless of the permissions.
Full Story -
I am pretty sure that my computer crash was caused by working with the newest version of Garageband 08. Ever since buying it and loading it, my computer has been acting funny whenever I use the Garage Band program - I could only record about one in three attempts since the computer kept freezing as soon as I finished recording a line. I would have to use force restart to get going again.
The day the computer crashed, I was working on a Garage Band project, which kept crashing, and I was also using Finale, Microsoft Word, and iTunes -- all of which are my normal procedure and I'd never had any problems with anything before loading the new Garage Band 08. (See my posts on other discussion topics for more details). After the last freeze, the computer crashed totally and could not be restarted - it would get to the gray screen with the spinning gear and just sit there while the fans ramped up to overload.
I used Disk Warrior to rescue whatever files I could onto an external hard drive, and I started to download all the Garage Band files. However, the "estimated time to completion" said over 6 hours , so I stopped the download after a minute or so and went on to rescue all the other files that were smaller in size and easier to download - I figured I'd set Disk Warrior to download the whole 78 GB set of Garage Band files overnight while I slept. But....when I went back to begin the download again, I noticed that the directory of Garage Band files went only to the letter "C" instead of all the way to "Z" like my original files had done during that earlier attempt to download. I am assuming that somehow, the directory for the files I download before aborting the attempt (A-C) got exchanged with the directories of the original version (A-Z), but the original directory was no where to be found.
I decided to try an archive install in the hopes that I could just restart my computer and get the files out by hand. The archive install went fine, and the computer started up fine and got to the log-in screen, which had changed. I now had two blanks - one for user name and one for password, instead of the choices of names. I tried all my user names and passwords, and asked my wife for her names and passcodes, but nothing worked. The computer had apparently re-set all its permissions and User accounts. I tried using Disk Utility to reset the password in its opening screens, but instead of getting several User options, the only one it allowed me to attempt was "System Administrator (root)", and even that wouldn't let me in to change any passwords.
That's when I downloaded Data Rescue II, which does seem to do a good job of locating lost files. However, since I didn't have permissions to open the computer the last time, I am still apparently facing the same thing when I try to access files copies OFF the computer.
So I'm not out of the woods yet. I can see the files on the Data Rescue screen, but I don't know whether they have permissions tied to them or not, and if they do, whether the system would let me since I don't know what the passwords and user names have defaulted back to.
Any advice? Please?

Data rescue

Hi everybody, I need urgent help from you expert guys.
Yesterday, I used the disk utility program to partition my external hard drive (500Gb) from one to two partitions. After this step all my data (allmost 300 Gigs backup files and others) were not available anymore. I assume, that the partition table was deleted by this action. I am using an iMac G4 and a fresh installed Leopard (Mac OS 10.5).
How can I recover my data on the external hard drive? I did not try anything else so far, to prevent things getting worse. I hope things are easy to get fixed!
Thanks a lot,
kaimich

I hope things are easy to get fixed!
They aren't. You clicked through a warning that partitioning the drive would destroy all data, and that's what happened.
Your best chance is to send the drive to a professional recovery service such as DriveSavers. Their services are very expensive.
You might be able to salvage something using do-it-yourself recovery software. I have no experience in this area, but I sometimes see mention of a product called "Data Rescue 3." I can't vouch for it and I don't know whether it works on a drive that has been partitioned.

What should I do on GMAIL LOADING and the buttons that don't work on Firefox 4?

The Write e-mail, reply, reply all and config GMAIL buttons DON'T WORK AT ALL in MZ Firefox 4. In Explorer 9 works fine. Shat shoud I do? And ABOUT:CONFIG dom.storage don't fix the problem

Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft
Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft

Data Rescue II Question for Al Van Malsen?

Al Van Malsen,
Thanks. I'm using the Demo right now of Data rescue in target disk mode using my sister's computer. The quick scan revealed nothing but now I'm doing the thorough scan to see if anything pops up. I don't expect it to but at least I can see if it will work.
What about the unplugging and plugging my computer back in to get recovered files. I've noticed that happens when I unplug my Mac normally there is always recovered files in the trash. I'm not expecting this to be a solution just wondering.
Since you were so helpful on my other question I thought I'd post a seperate question.
S.

What about the unplugging and plugging my computer back in to get recovered files. I've noticed that happens when I unplug my Mac normally there is always recovered files in the trash. I'm not expecting this to be a solution just wondering.
The files you find in the Recovered Files folder are those previously in /private/tmp/ in Mac OS X or Temporary Items in Mac OS 9, and can be recovered manually by copying them out of that folder without a restart. Powering off the computer improperly won't recover anything except in very special cases, such as if you've deleted something in Mac OS X less than 30 seconds earlier.
(27144)

Adobe Flash & Javascript don't work even though Enabled

Ever since what I think was either a Firefox upgrade (I don't know which one) or installation of Quicktime, my Adobe Flash Plugin is perpetually crashed and I cannot play any Flash content on any website. All that displays in place of the video is a gray screen with the sad-face Lego icon and the message: “The Adobe Flash Plugin has crashed. Please reload the page to try again.” (See attached image.) But it will not resolve when reloaded.
No Flash videos on any sites work. HTML5 videos work on YouTube when tested, but non-HTML5 videos won't work.
Also, my Javascript does not seem to be working since at least some displays requiring javascript don't work. Sometimes the display just doesn't work, and sometimes I get a message that javascript is disabled and must be enabled, but it is already enabled (set to “true” in about:config).
I have spent days scouring every help forum entry I can find on troubleshooting Flash Player and Javascript. Everything on my end seems to be in order and I cannot find or fix either problem. I think it is possible the issue could have its roots in the fact that Javascript seems to not be working which may be preventing Flash Player content from working...??
Also, Flash content does work in I.E. but not in Firefox (I do not have Chrome installed so did not test in Chrome). I have too many window tabs open in Firefox and can't switch to I.E. (nor do I like to use I.E.).
PLEASE HELP as this is crippling for very important work deadlines I have.
This is what else I know and have tried:
I have a Toshiba Satellite C75D-A Laptop;
Processor: AMD A6-5200 APU with Radeon HD Graphics; x64; 2.00 Ghz;
RAM: 8 MB;
OS: 64-bit system; Windows 8.1 (but some auto-check utilities detect it as 8.0 because it was upgraded.);
Graphics Card: “Desktop Graphics” System – AMD Radeon HD 8400 (0x9830);
Installed Graphics Driver Version: AMD 13.352.1004.1007 (Driver Date: 4/22/2014)
My Device Manager graphics driver updater states: “driver software is up to date.”
From the AMD website: the graphics driver auto-detect utility recommended the AMD Catalyst Driver (amd-catalyst-omega-14.12-without-dotnet45-win8.1-64bit.exe) I tried installing this driver, but it won't install. After trying to install, I got a message stating: “We are unable to find a driver for your system.” But Device Manager states I have a current driver, and my graphics card & driver seem to be working fine, so I do not believe this is part of the issue.
I am using Latest Firefox version 35.0.1; and
Using Latest Flash Player: 32-bit NPAPI Plug-in Version: 16.0.0.296; designated: “always activate” (Downloaded new update several times, including fresh install after uninstall; system & web address icons indicate Flash is enabled).
I turned off hardware acceleration in FF Tools>Options>Advanced>General
I disabled WebGL as explained here: https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration
I am using Ad-Block Plus which has never affected things in the past. I have not tried starting FF in Safe Mode because I believe I will lose all open tabs and not be able to recover them (I may have over 200 open). But disabling add-ons has no effect (I disabled all except for Sessions Manager in case of a crash). (My No-Script has been disabled for at least six months.)
I have Windows Media Player and Quicktime installed.
Quicktime is most recent upgrade (7.7.6) so should not be a problem according to:
“QuickTime plugin takes over Flash” at:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here)
Disabling Quicktime had no effect in the prior version of FF (ver. 35.0), but in latest FF ver. 35.0.1, Flash videos only display a plain (blank) gray screen instead of the sad-faced icon and crash message.
(I tried to uninstall Quicktime altogether, but was not able to due to Error codes 2502 & 2503. I tried troubleshooting that as well with no luck using methods successful for other programs, including here:
http://www.fixkb.com/2014/01/error-2503-and-2502-when-uninstalling-on-windows-8.html;
& here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/re-internal-error-codes-2502-and-2503-for/ba5f2145-aa6e-4cc0-81a7-e4346f43b698.)
Disabling my FF theme and using the default brought back the sad-faced icon and crash message in the place of videos on some YouTube pages, but not other YouTube pages (where video was still blank gray screen). It also enabled a still Flash image (an ad) to display on a different website page that previously had a Flash Plugin crash message. I have been using this same theme for a couple of years without previous issue. While turning it off did generate an effect on some still imagery, it didn't fix the video problem.
I tried Disabling Protected Mode in Flash 11.3 as explained here:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here).
It did not solve the issue.
I also deleted all storage & data in Flash Player as advised. This had no effect either.
I've tried all solutions I've been able to find and am at a loss for what to try next. Please help and advise ASAP. Thank you!!

''guigs2 [[#answer-684038|said]]''
<blockquote>
I truely admire the efforts that have been made to make this work.
"“We are unable to find a driver for your system.” "
For it not installing, you need to follow these instructions to install them: see the comments: [http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/windows-10-atiamd-display-drivers/50944d10-dde3-4e08-8244-d54eb2b1e7de] --> take warning though it looks like it has caused issues for others as well.
Since it was working for some youtube videos and not others, there might be an issue with a particular video codec. DO you have OpenH264 Video Codec provided by Cisco Systems, Inc. plugin?
Is it possible to try Safe Mode after saving your session with [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager Addon]? IT would test hardware acceleration in Firefox.
</blockquote>
Thank you, guigs2! Sorry for my delayed reply...I didn't realize I hadn't gotten back to you. Update is that I did try a whole slew of other troubleshooting steps including starting FF in safe mode, to no avail. However, I was FINALLY (after months) able to solve this problem just today by pure chance!
The problem was that hardware acceleration was enabled in the Flash settings. I had not been able to turn it off because I didn't have access to the Flash Player settings as long as the crash error message was visible, which was all the time! Today, by a sheer fluke, I saw a static picture in place of the crash message on a Flash video. I snagged the opportunity to call up the settings and turn off hardware acceleration, and it fixed the problem for my whole browser! This has been a frustrating issue because I did not have access to the settings utility as long as I had the crash message, which was always, so my Flash was crippled without the ability for me to fix it until pure luck gave me this window of opportunity.
Does anyone know another way to access the settings utility if this ever happens again in the future? I could not find a way. (Incidentally, I had tried disabling hardware acceleration via my graphics driver settings, but it didn't fix the problem.) We need Adobe to allow some other way to access the Flash Player settings utility when this problem arises since they aren't accessible when there is a static crash message.
Thanks again!

IPod Touch: apps (facebook, twitter, facetime) don't work properly with my wireless internet having worked perfectly before. Help needed!

I got my iPod Touch 4g for Christmas 2011 and for the first 2 weeks everything worked fine - I could download apps; use apps to their full potential; use FaceTime; use everything.
But after the two weeks, the iPod decided to no longer work as well as it had promised. First of all, it would take more than 2 hours to download a single app from the app store and then, straight after that, I couldn't connect to FaceTime (it had worked perfectly before). Then, finally, to top it all off - Facebook and Twitter stopped working on occasions. For example, I couldn't post/send messages or photos on Twitter and at the majority of the time, the News Feeds wouldn't load.
Sometimes everything works but most of the time it doesn't. I've tried my iPod at every time of the day and it makes no difference - nothing still works! Also, I don't think it is the fault of my wireless internet because I've had an iPod touch before and it worked perfectly, and the laptop that I am writing this question on also works perfectly with wifi.
The weird thing is that I have used my iPod to its full potential (everything worked fine) at my friends hosue on multiple occasions - using his wifi. I am really lost for ideas for what to do - I have uninstalled all the apps that don't work with the internet (facebook, twitter) and have always made sure that I have closed apps after using them, so that my iPod wouldn't run slow.
My iPod has been like this for over a month now, help would be appreciated

Do you have a blackberry data plan active. On your account? You need an active blackberry data plan to use the majority of data functions on your phone, even if you are connected to wifi

Prosoft Data Rescue for Hard Drive "No Valid Packages" in Disk Utility

I have a Macbook and I believe the hard drive has crashed. When I turn it on, I get the circle with line through it and the folder with question mark inside blinking.
I got the Install Disk 1 to boot up but can not verify the hard drive. I get the following message "No Valid Packages" and disk verification fails. I also checked the SMART status of the hard drive and it says "Not Supported".
I also can not re-install the operating system, as there is no hard drive that shows up to install it to when I try to run the installer disk.
I know I need a new hard drive, much bigger one. I'm purchasing this today, a 320gb Samsung M6 Series internal drive and a Western digital external 500gb WDE1U5000N.
I also want to purchase the Prosoft Data Rescue but have several questions:
1)I read the this can work if disk utility sees the hard drive. The hard drive is seen in disk utility, but like i said before the drive has failed and it can not mount. I've read other reviews that said Prosoft can still be used in this case, but I want to make sure..please define what is meant by "disk utility being unable to see the hard drive"...Does this mean "dead hard drive or the hard drive not physically being VISIBLE in disk utility (because mine is, I just can't mount or verify it)
2)If I can use Prosoft, when I put it in my damaged Macbook to recover the files, can I then put these files onto my new external drive? Or do I have to have another internal drive to do this? (I'm just buying 1 right now)...How do you get the recovered data off if I can not move it onto an external drive? Do I put it on a disk and then take the damaged hard drive out, put the new one in and then put it on the external?
Sorry for the questions but I want to buy today by 5pm so it ships by Friday to me to fix this ASAP, thanks!

I read the this can work if disk utility sees the hard drive.
Prosoft Data Rescue can help recover files after a software failure. (Usually related file directory problems.) It sounds, however, that you've experienced a hardware failure of your original hard drive. No amount of software can ever recover a hard drive from a hardware failure. If you really need to recover the data, a data recovery service may be able to help. The cost will depend on the steps needed to recover the data and how much data is recovered.
-Doug

TV don't work with OSX Server software?

Everything worked great BEFORE I updated our MacMini Intel to OSX Server software, now iTunes can't find the recent found Apple TV. And therefore the connection is gone and the syncing don't work anymore.
Any work-around or suggestions on how to solve this?
Or do I have to revert to previus userversion of OSX to make it work again?
Is there a limitation built into OSX Server software or is there maybe some kind of firewall / preferences etc that needs to be adjusted? (The built in firewall has been disconnected.)
FYI:
All apps are up to date. The Mac Mini + Apple TV is on my local network at home and I'm trying to make it my family's digital hub for all family-related media.
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)

1) I've not tried to reset ATV from scratch. But it works fine on other Mac's on the network (sharing).
2) Security options, yes I belive so to. I've followed all instructions and opened all ports I've seen mentioned i apples Knowledge database / support. Still don't work. Maybe I've missed some ports...
3) YES! It works fine sharing the MacMinis lib over the network.
4) Today I also tried to reinstall iTunes. But no luck.
Any mor suggestions anyone? Thx
I really wanny solve this, otherwhise my ATV is pretty useless for me...

Videos don't work on IE8 or Firefox, have tried all I can think of. Please help?

A bit of background.
My computer runs Windoxs XP 2002, with Service Pack 3. About two months ago I noticed that youtube did not work on IE7, so I recently downloaded IE8...needless to say videos still don't work (on youtube and bbc amongst others). I have Adobe Flash Player 10.1.102.64 (the latest I think).
By don't work I mean that when I go to bbc the vidoes either appear as a still, which one would normally click on to start, or they appear blank / white. When they appear as a still and I click on the video, the place where the video was goes blank.
Youtube loads really strangely (I think kind of like HTML version) and no vidoes work.
I have checked that all add-ons are enabled, and my Java is up to date. I have also fiddled aroud with the "enable hardware acceleration" but to no avail.
On top of that I have uninstalled and re-installed both flash player and IE8 (the second time I downloaded IE8 I clicked on the 32 bit version). When installing flash player I used the desktop version and disconnected from the internet just to make sure.
Having looked on some forums I tried Firefox but again no luck. I am getting really frustrated as I have no idea what to do.
In terms of do I operate 32 bit or 64 bit, I don't know (if someone could tell me how to find out then I will).
Please can someone help?
Thanks
Will

Adding the read permissions to the registry key as noted above fixes the problem when the 'read' permissions for "USERS' is missing.
In systems I have checked the key has the USERS permission ACE before 10.1.102.64 is installed and missing after the installation.
On Windows Server 2003 the key inherits 'Authenticated Users' instead of 'Users' which should be true for all systems post-XP. The inheritance seems to be removed and keys are not copied in correctly.
I believe, and this should be checked with Microsoft, that the inheritance needs to be restored and the root of CLASSES/MIME. This is what I have chosen to do as this is the way it is on all working systems.
The error may be caused by one of the trojans that has attempted to exploit Adobe Flash as this would cause Power Users(this account is missing too) to install a new control. They could then be redirected to another rogue site where malware could be installed. All of my systems run as standard users and I only run as admin to do installs and repairs so this exploit would not easily work.
This is a good warning to not run as a Power User. As Administrator the exploit won't trigger as the administrator ACE has been copied to the key.
I believe this may be a good example of an 'Elevation of Privileges' type of exploit. This is the Find-A-Hole-And-Make-It-Bigger Exploit (FAHAMIBE) Say that three times fast.
Kidding aside. I hope this is useful to somebody but may not be the cause of all errors like this one so check very carefully.
I don't think this is caused by the newest Adobe installer or release.
Message was edited by: jvierra21

Data rescue II don`t work

Similar Messages

Maybe you are looking for