Data retrieval error in Flash

Hi,
I am having problems retrieving data from within the Flash
file, over SSL(https://). When I try the same with
http:// protocol there are no problems. I don't
have access to the source code, but I only have the .swf file.
I was hoping that someone on the forum would have had some
problem similar to this one and possibly they can suggest some
options to try out.
Thanks,
Ratna.

I'm not an expert on this but it may have to do with the
security of Flash. I'm guessing that because you said it works over
http but not https. Flash is setup security wise so that movies
from http can not access https. This keeps secure information from
being passed to insecure areas. So you may want to check that out
(I think you have to specifically setup your movie to allow this
insecure access). Hope this points you in the right direction.
TwiceAlive100

Similar Messages

ESsbase Data retrieve error

I have recently upgraded the essbase on unix from 9.3.0.1 to 9.3.1. During the upgarde there was no problem it looks like it went smoothly. However, I could not retrieve data from excel addin or even from Adminstration console.
The error message I get from excel addin is: " cannot load application with error number 1052003.see server log file"
And I found the following error message in the server log:
"Starting application BigCorp
ld.so.1: ESSSVR: fatal: libARicu22.so: open failed: No such file or directory
[Fri Jan 9 15:50:32 2009]hypprd02 /ESSBASE0///Error(1052003)
Timed out reading from server"
Can you please help me resolve this issue
Thanks

Here is what the error description is for the Essbase error that is being returned:
h2. 1052003 Timed out reading from server
h3. Possible Problems
Analytic Services timed out before it could read from the server.
h3. Possible Solutions
<ul><li>Make sure that the [block size|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/dbag/dstalloc.htm#1011425] is within the recommended range. </li>
<li>Make sure that the following [environment variables|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erinfo.htm#environment] are set correctly:
<ul><li><code>ARBORPATH</code> (PC and UNIX) </li>
<li><code>PATH</code> (PC and UNIX) </li>
<li><code>LD_LIBRARY_PATH</code> (UNIX only) </li>
</ul>
</li>
<li>Make sure that the network is functioning correctly. Check the previous messages in the [application log|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/dbag/dlogs.htm] for [network error messages|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/ernetwrk.htm]. </li>
<li>[Stop and restart|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/dbag/dagent.htm#1017676] Analytic Server. </li>
<li>Increase the values for [NETDELAY and NETRETRYCOUNT|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erinfo.htm#netdelay_netretrycount]. </li>
<li>Increase the values for AGENTDELAY.
<ol><li>If you do not have an <code>$ARBORPATH/bin/[essbase.cfg|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/techref/config/homecfgl.htm]</code> file on the server computer, create one using a text editor. </li>
<li>In the <code>$ARBORPATH/bin/[essbase.cfg|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/techref/config/homecfgl.htm]</code> file on the server computer, add or increase the value for AGENTDELAY. </li>
<li>[Stop and restart|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/dbag/dagent.htm#1017676] Analytic Server. </li>
</ol>
</li>
<li>Make sure that Analytic Server and the Analytic Services client are installed correctly. </li>
<li>Check to see if any [databases are corrupt|http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erinfo.htm#corruption]. </li>
</ul>
Note: this information is from http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erhelp.htm.
Tim Tow
Applied OLAP, Inc

Query Error Information: Result set is too large; data retrieval ......

Hi Experts,
I got one problem with my query information. when Im executing my report and drill my info in my navigation panel, Instead of a table with values the message "Result set is too large; data retrieval restricted by configuration" appears. I already applied "Note 1127156 - Safety belt: Result set is too large". I imported Support Package 13 for SAP NetWeaver 7. 0 BI Java (BIIBC13_0.SCA / BIBASES13_0.SCA / BIWEBAPP13_0.SCA) and executed the program SAP_RSADMIN_MAINTAIN (in transaction SE38), with the object and the value like Note 1127156 says... but the problem still appears....
what Should I be missing ?????? How can I fix this issue ????
Thank you very much for helping me out..... (Any help would be rewarded)
David Corté

You may ask your basis guy to increase ESM buffer (rsdb/esm/buffersize_kb). Did you check the systems memory?
Did you try to check the error dump using ST22 - Runtime error analysis?
Edited by: ashok saha on Feb 27, 2008 10:27 PM

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

IR webclient: error when uncompressing data retrieved: *Data Error*!

A small (?) number of IR webclient 931 installations we notice the next error when processing: " error when uncompressing data retrieved: *Data Error*! " It does not seem to be user or permission/provision related.
Does anyone have an idea how to solve it. Reinstalling the IR webclient does not solve it.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

Flash IDE, Haxe & OpenFL - Invalid Data Swf Error #2136

We've recently run into a show stopping issue and can't seem to find any one else on the net who has the same problem (although there have been similar ones).
We're currently developing a game using Haxe and OpenFL. We use FlashDevelop to code the game and the official FlashIDE (CS6) to create UI/menus which is then hooked up via code in FlashDevelop. A few weeks ago the FlashIDE crashed while the FLA was being worked on. Nothing appeared to be wrong as the file opened normally, however, after building our game in FlashDevelop we received the following message "Invalid Data Swf Error #2136". Since then we've done a handful of things that will seem to fix it temporarily, but as of now, none of those solutions work. At this point we think its some sort of flash limit or an issue with OpenFL, Haxe, and FlashIDE (or some combination of).
I'd like to note that we've noticed some weird behavior - if we removed any clip the error disappears and if we add it back, the error returns.
Here's what we've tried:
recreating movie clips that were created after the crash
converting the FLA into a archive and repairing it with WinRAR
splitting the FLA into two files
copying the library into a new FLA file
Any ideas on how to fix this would be greatly appreciated!

If you found a specific clip that caused it to build or fail I'd say it's a possibility. However you mentioned in the OP that you took 'any' clip out and it works but put it back and it breaks. This really seems like a limit. Limits should be openly documented however.
Perhaps you should take a large bitmap and a complex vector and drop them in 2 different symbols. Then duplicate these symbols until you have more symbols than you currently have. Internally they will all point to the same graphics so it won't be a heavy file. Try exporting that with OpenFL and see if it's a library reference limit.
I'm sure you get what I'm getting at. If limits arent documented, you may need to stress test the libraries, languages and frameworks yourself using simple self made tests.

Run time error data retrieval

hi all
am creating a normal alv reprt using
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
but am getting a error in the form data retrieval the form is as below
form data_retrieval.
select FBUDA VBELN WERKS LGORT NETWR
UP TO 10 ROWS
from vbrp
into table IT_VBRP.
endform. " DATA_RETRIEVAL
please help me out from this.
with regards
vijay

here the order of fields u r selecting is different from the strucure of the table...
try this ...
form data_retrieval.
select FBUDA VBELN WERKS LGORT NETWR
UP TO 10 ROWS
from vbrp
into corresponding fields of table IT_VBRP.
endform. " DATA_RETRIEVAL
reward if it helps u..
sai ramesh

EPM11.1.1.2:error when uncompressing data retrieved

After I open a BQY in IR WEB client and click the "table",there is an error happened. The error message is "error when uncompressing data retrieved:*Data Error*". My IE has no google toolbar or any other toolbar. What's wrong?

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

IRWebclient: error when uncompressing data retrieved: *Data Error*!

We experience a sporadic "error when uncompressing data retrieved: *Data Error*!" while processing a query with IR webclient 931. The problem occurs on several webclients but on other desktops it does not. The IHTML processes fine.
Any one an idea? reinstalling interactive webclient on the same pc does not help.
Completely reinstall the pc (os and other client software including interactive webclient) does help.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

WAD : Result set is too large; data retrieval restricted by configuration

Hi All,
When trying to execute the web template by giving less restiction we are getting the below error :
Result set is too large; data retrieval restricted by configuration
Result set too large (758992 cells); data retrieval restricted by configuration (maximum = 500000 cells)
But when we try to increase the number of restictions it is giving output. For example if we give fiscal period, company code ann Brand we are able to get output. But if we give fical period alone it it throwing the above error.
Note : We are in SP18.
Whether do we need to change some setting in configuration? If we yes where do we need to change or what else we need to do to remove this error
Regards
Karthik

Hi Karthik,
the standard setting for web templates is to display a maximum amount of 50.000 cells. The less you restrict your query the more data will be displayed in the report. If you want to display more than 50.000 cells the template will not be executed correctly.
In general it is advisable to restrict the query as much as possible. The more data you display the worse your performance will be. If you have to display more data and you execute the query from query designer or if you use the standard template you can individually set the maximum amount of cells. This is described over [here|Re: Bex Web 7.0 cells overflow].
However I do not know if (and how) you can set the maximum amount of cells differently as a default setting for your template. This should be possible somehow I think, if you find a solution for this please let us know.
Brgds,
Marcel

Real tough data retrieval - assistance needed

Late 2011 Macbook Pro with 500GB hard drive
Lion 10.7
One morning out of absolutely nowhere I get this grey screen with a flashing question mark folder. I take it to the geniuses at the Apple store and they tell me my hard drive has failed (no explanation). My mac is under warranty so they gave me a new hard drive for free, bagged my old hard drive and told me "good luck" retrieving the data.
I'm on a mission to retrieve the data without paying for services. I have never retrieved data before but I've been doing a lot of forum reading and I have been getting protips from an IT friend who has saved my PC data before.
As of now, I have been unable to even access the hard drive and so I am reaching out to the community to help me conquer this project.
the problem is not the OS (according to Apple store)
when hooking up with the dongle, neither Finder nor Disk Utility detect the bad drive
the drive will spin when forced by the dongle (so I've ruled out the freezer method)
I was advised (by friends and forums alike) to download so powerful data retrieval software:
Data Rescue [did not detect bad external drive]
Disk Drill [did not detect bad external drive]
TestDisk (http://www.cgsecurity.org/wiki/TestDisk) [I can get it up and running but I have no idea how to use this software]
So that seems to be the big problem, when I hook up my failed drive as an external hard drive, there is no acknowledgement from my MBP that it is connected and as such data recovery programs cannot access it. When I still had it installed in my computer, there was no clicking sound and it doesn't seem like any of the components are jammed up as it still spins.
Where do I go from here? Please keep in mind that I am new to resolving my own technical problems but I'm willing to learn. Tired of being one of those people who look at computer parts and get anxious.
NOTE: I haven't tried Target Mode as I do not have a firewire cable or access to another mac (yet). If you think I should try this, please let me know.

A hard drive that will not divulge BOTH its Make&Model and a reasonable size/capacity to the likes of Disk Utility and data rescue programs has died, and connot be repaired with any software.
Target Disk mode will not improve anything. The drive is read as a Mac Volume by software. If it won't mount under Mac OS X, it won't mount under Target Disk Mode.

Data retrieval failed

Greetings all,
i'm having a problem in order to retrieve data from oracle 10g views.
Notes: Data retrieval from other tables are just fine. Some views are created for me in order to share some data from other databases. As far as i concern, we actually use the same syntax (as retrieving data from table) in order to retrieve data from view. This is my codes:
if (($_POST['barcode'] != "") || ($_POST['sname'] != "") ) {
include("conn.php");
 if (!$conn){
 echo "Error!Cannot connect to database, please try again later";
 exit;
 @mysql_select_db($db);
 $sname = strtoupper ($_POST['sname']);
 $barcode = strtoupper ($_POST['barcode']);
 $ss = strtoupper ($_POST['ss']);
 print $sname;
 print $barcode;
 print $ss;
 if ($barcode != ""){
 $stid = OCIParse($conn, 'SELECT NAMA FROM VIEW_A WHERE SEM=:ss AND BAR=:bc');
 oci_bind_by_name($stid, ":bc", $barcode);
 oci_bind_by_name($stid, ":ss", $ss);
 }elseif($sname != ""){
 $stid = OCIParse($conn, 'SELECT NAMA FROM VIEW_A WHERE SEM=:ss AND NAMA=:sn');
 oci_bind_by_name($stid, ":sn", $sname);
 oci_bind_by_name($stid, ":ss", $ss);
 $r = OCIExecute($stid);
 $row = oci_fetch_array($stid, OCI_ASSOC + OCI_RETURN_NULLS);
 if ($row==0)
 ?>
No Records!
<?php
 else
 while (($rows = oci_fetch_array($stid, OCI_BOTH))) {
 ?>
Name:: <?php echo $rows[0]; $rows['NAMA'];?>
<?php }}} ?>

I didn't understand what real problem you have?
If you missing one row of data, it's because you don't print the first row out.
If you mean that results are not ordered, then you need to add an ORDER BY clause to the queries.
PS you have a mysql call in there. Also you mix the old and new OCI function naming style.

I get the error "adobe flash player has stopped working...

I get the error "adobe flash player has stopped working...something about a data execution.... Can someone tell me why this happens? Would appreciate if you email me at [removed] because I don't visit this site often. Thank you

This is a public forum; please do not post your email address or other private data! You will get an email notification if someone replies to your topic.

Uploading CSV using browse item ( getting no data found error )

Hi,
i am using below procedure to upload CSV into my table.
CSV is having null values in some places ex: 1,
2,0.999
3,
4,0.696
below procedure working fine when i am uploading CSV like : 1,0
2,0.999
3,0
4,0.696.
My table is having only two columns, and i am getting no data found error when uploading null values CSV file.
I went through Import data in excel to database table but no use..
Please help me on this.
Procedure
===========
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
BEGIN
-- Read data from wwv_flow_files
select blob_content into v_blob_data from wwv_flow_files
where UPDATED_BY = (select max(UPDATED_BY) from wwv_flow_files where UPDATED_BY = :APP_USER)
AND id = (select max(id) from wwv_flow_files where updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities
v_line := substr(v_line, 1, length(v_line)-2);
 v_line := REPLACE (v_line, ',', ':');
-- Convert each column separated by : into array of data
 v_data_array := wwv_flow_utilities.STRING_to_table (v_line);
-- Insert data into target table
 EXECUTE IMMEDIATE 'insert into table_name@Schema1 (col1,col2)
 values (:1,:2)'
 USING
 v_data_array(1),
 v_data_array(2);
 -- Clear out
 v_line := NULL;
END IF;
END LOOP;
END;regards
Chandran
Edited by: Chandran on Sep 26, 2012 10:52 AM
Edited by: Chandran on Sep 26, 2012 10:25 PM
Edited by: Chandran on Sep 27, 2012 1:58 AM

Chandran,
You can use wwv_flow_utilities.array_element to avoid no_data_found error. The function does not raise errors. So, for the line which only have one array value when you expect 2, it may be useful.
EXECUTE IMMEDIATE 'insert into table_name@Schema1 (col1,col2)
 values (:1,:2)'
 USING
 wwv_flow_utilities.array_element(v_data_array,1),
 wwv_flow_utilities.array_element(v_data_array,2);Regards,
Christina

Data retrieval error in Flash

Similar Messages

Maybe you are looking for