Data retrival from PSA
Dear All,
We have SAP BW system at our place,
There was some data related issue in SAP R/3 Side due to which Daily updates were unsuccessfull.
We corrected the issue in SAP R/3 Side.
and updated data using full uopdate, This might have deleted some data due to data replication or any other reason.
Now i have reset it to delta update. and update process is running successfuly.
But now i find data for some period is missing.
Please help to resolve this issue.
Regards,
Gaurav
Hi Gaurav,
Find out selections for missing records.
If you are using an infocube perform deletion for the above found selections However if you are using an ods/dso ( in overwrite mode ) no deletion is required .
Create an infopackage, go to scheduler menu and select repair Full load:
give the selections in the data selections tab , these selections should be similar to what used while deleting the records,
Update mode Full
Start the infopackage
This is how we perform repair full request
Hope this helps
Please assign points if helpful
Manish
Similar Messages
-
DTP can Not extract data of date field from PSA to Target DSO
Hi everyone.
I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
The data of date type fields are extracted very well from datasource to PSA.
But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
Another date type fields is good. but only "BLDAT" field is empty.
I added "BLDAT" later than another date fields.
Is that the reason??
I don't know why.
Let me know the solution. pls~~~~Hi,
Try deleting and recreating the DTP and loading again.
This solution refers to note 925941 and should be solved in SPS10.
Best regards,
Olav -
Data is not updating in data target from PSA
Hi,
i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..hi bwusr,
direct update, so it's master data,
is it attribute or text ? perhaps there's invalid character or lower case,
check in monitor tab detail.
and when you said not updated to data target,
you check by right click 'maintain master data' ?
or you mean it's not updated to reporting ?
execute change run ? rsa1->tools->apply attribute/hierarchy change.
hope this helps. -
I has standrat BI7 data load process: DataSource -> IPackage -> DTP -> DSO.
I've deleted 3 last requests in my custom developed DSO. They do exists in PSA. Now I want them to be restored from PSA, but unfortunately, there is no "Update with scheduler" menu item then I right click on request in PSA.
The data source, IPackages (full, init, delta) and the DTP are active.
I tried to use rsa1old, but I didn't datasource in data source tree, probably because i'm using BI7 data load...
So, why SAP doesn't allow me to update requests again? Are where any other ways to do it?Hi Gediminas,
once you deleted the requests from DSO automatically you can observe the "not updated to any target" symbol in the PSA fro those requests that are deleted from DSO
so when you schedule the DTP (Delta) again it will only take the requests from PSA which are not updated to any targets so it should take the deleted three requests and once they are updated to the target the symbol will change in PSA for those requests
But if you do any structural change to the data source then you again need to replicate adn activate the Data source and load the data up to PSA
Thank you -
Error 8 during data transfer from PSA - Cube
Hello,
when I want to load data from PSA to Cube I get "error 8 in update".
I already had error 7 oder error 4 in the past, but what does this error 8 mean and how can I solve it?
Thanks in advanceThe reason is this
that if you try to load data records to the cube which is already archived. Please note that until the archives are not reloaded
back, the same interval cannot be loaded.
workaround in case of semantic lock is
is to reload the data from archive -> semantic lock disappears -> load/update the data -> archive data again. -
Hi,
I deleted 2 failed requests (10000000 Records) from PSA Tables because of the disk space issue for our BW System.
RSA1PSA DELETE PSA DATA
The requests are deleted from the PSA, In BW in can see that there not requests in that particular PSA.
But Basis/Database team raised an issue that the data has been added to the Database
What is this mean and how can I proceed with this
ThanksHi,
Thanks for the info provided.
So according to the info provided the Deleting the request from the PSA marks as To be Deleted
When the last of all requests in one partition gets deleted, what do you mean by this.
There are 2 requests in our PSA,I deleted 2 of them and in BW when I go to PSA there I dont find any requests available in PSA.
But our basis team complained that some data has been added to data base
Thanks -
How to load data for attribute of Master Data Object from PSA
Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSAJr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help -
Data moving from PSA to Infoobject- ASAP
Hi all,
I am moving data from R/3 to an Infoobject, strangely the data get updated till PSA but no to the infooject. so while debugging the tranfer structure i found that the infoobject is assigned with incorrect R/3 filed. My doubt is if in the tranfer structure level itself it is incorrectly assigned the how does the data appear in PSA. Please clear my doubt.
RegardsHi,
the data is tranfered from R/3 to PSA without any trasformation. So transformation can be done in update or transfer rules. Chechk them both and import the data again.
Regards
MK -
Data retrival from standard transaction with in a report
hi all,
i have a requirement like i need to pass the selection screen selections to a standard transaction ca80 and need to get the material list from there to my report for furthur processing. is it possible with bdc or a bapi for this.
can anyone please help urgent its eating my brain. points awarded for solution
thanks in advance
anupamahi deep kammula,
this is a sample code for your query just check. it may help you.
all the best.
reward me points if usefull.
Sample HR Reports - Allocate Petrol Allowance
Two ABAP HR Programs, which are interconnected, the first takes employee numbers which should not be given Petrol allowance and the other program gives the petrol allowance to employees.
FIRST PRG
REPORT ZPETROL_EXCLUDE .
TABLES SSCRFIELDS.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECTION-SCREEN SKIP 9.
PARAMETERS NUMBER(200) TYPE C.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN:
BEGIN OF LINE,
PUSHBUTTON 2(10) TEXT-001 USER-COMMAND PROC,
END OF LINE.
SELECTION-SCREEN END OF SCREEN 100.
CALL SCREEN 100.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'PROC'.
SET PARAMETER ID: 'NUM' FIELD NUMBER.
CALL TRANSACTION 'ZP_PALLOWANCE'.
LEAVE TO SCREEN 0.
ENDCASE.
SECOND PRG
REPORT ZPR_PETROL_ALLOWANCE NO STANDARD PAGE
HEADING .
*-- Infotypes
INFOTYPES : 0000, "Actions
0002, "Personal Data
0008. "Basic pay details
*-- Tables
TABLES : PERNR, "Standard Selections for HR Master Data Reporting
PC207, "Payroll Results: Results Table
PCL1, "HR Cluster 1
PCL2, "HR Cluster 2
T510, "Pay scales
T549A, "Payroll areas
T549Q, "Payroll Periods
PA0002. "Personal details
*-- Internal Tables
*-- Internal Table Declaration For Holding The Data
DATA: BEGIN OF INT_PETROL OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL.
DATA: BEGIN OF PA0015_DATA OCCURS 0,
PERNR LIKE PA0015-PERNR,
BETRG LIKE PA0015-BETRG,
END OF PA0015_DATA.
DATA:BEGIN OF INT_PETROL2 OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
VORNA LIKE PA0002-VORNA, "First Name
NACHN LIKE PA0002-NACHN, "Last Name
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL2.
DATA : TITLE TYPE LVC_TITLE.
DATA: BEGIN OF PER_NO OCCURS 0,
PERNR LIKE PA0008-PERNR,
TRFST LIKE PA0008-TRFST,
END OF PER_NO.
DATA: BEGIN OF MSG OCCURS 0,
MSG1(100) TYPE C,
END OF MSG.
DATA: FLAG TYPE I VALUE '0',
DIS_FLAG TYPE I VALUE '0'.
DATA: INT_PETROL3 LIKE STANDARD TABLE OF INT_PETROL2 INITIAL SIZE 0
WITH HEADER LINE.
DATA: INT_PETROL1 LIKE STANDARD TABLE OF INT_PETROL INITIAL SIZE 0 WITH
HEADER LINE.
DATA: WA_PET_ALLOWANCE TYPE ZBPETROL_ALL. "WORKAREA FOR INSERTING
VALUES.
*DATA: P_LGART1 LIKE T512T-LGART VALUE '0010'. "CHANGE WAGE TYPE HERE
DATA: P_LGART1 LIKE T512T-LGART VALUE '0077'. "CHANGE WAGE TYPE HERE
DATA: BEGIN OF INT_0015 OCCURS 0,
PERNR(038),
BEGDA(010),
BETRG(018),
END OF INT_0015.
*-- Internal Table To Store Error Records.
DATA: E_INT_0015 LIKE INT_0015 OCCURS 0 WITH HEADER LINE.
*-- Batch Input Data of Single Transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*-- Internal Table For Export and Import Payroll Results
DATA: INT_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
LGTXT LIKE T512T-LGTXT.
DATA: BEGIN OF EMP_NO OCCURS 0,
PERNR(4) TYPE C,
END OF EMP_NO.
DATA: BEGIN OF EMP_NO1 OCCURS 0,
PERNR TYPE I,
END OF EMP_NO1.
DATA EMPNO LIKE STANDARD TABLE OF EMP_NO INITIAL SIZE 0.
DATA EMPNO1 LIKE STANDARD TABLE OF EMP_NO1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA LEN1 TYPE I.
DATA: ERR LIKE MESSAGE.
DATA TEMP_NUM(200) TYPE C.
*-- Includes
*-- International Include
INCLUDE RPC2CD09. "Cluster CD data definition
INCLUDE RPC2CA00. "Cluster CA Data-Definition
INCLUDE RPPPXD00. "Data Definition buffer PCL1/PCL2 Buffer INCLUDE RPPPXD10.
"Common part buffer PCL1/PCL2 INCLUDE RPPPXM00. "Buffer Handling routine
*-- Country Specific Include
INCLUDE PC2RXIN0. "Cluster IN data definition
INCLUDE RPC2RX09.
*-- ALV Declaration
TYPE-POOLS : SLIS.
DATA: INT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
INT_EVENTS TYPE SLIS_T_EVENT,
INT_LAYOUT TYPE SLIS_LAYOUT_ALV,
WS_EVENTS TYPE SLIS_ALV_EVENT,
WS_REPID LIKE SY-REPID.
*-- Initialization
INITIALIZATION.
WS_REPID = SY-REPID.
*-- At Selection-Screen
START-OF-SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TEXT-002.
SELECTION-SCREEN POSITION 33.
PARAMETERS: P_RATE TYPE P DECIMALS 2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF BLOCK B3.
PARAMETERS: P_UPLOAD AS CHECKBOX,
P_FG RADIOBUTTON GROUP G1,
P_BG RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B4.
PARAMETERS: P_DI AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK B4.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN.
*-- Wate Type Text
SELECT SINGLE LGTXT INTO LGTXT FROM T512T WHERE SPRSL = 'E' AND
MOLGA = '40' AND LGART = P_LGART1 .
*-- Data Retrieval From Logical Database PNP
GET PERNR.
PROVIDE PERNR FROM P0000 VORNA NACHN FROM P0002 BETWEEN PN-BEGDA AND
PN-ENDDA.
INT_PETROL1-PERNR = P0000-PERNR.
CONCATENATE P0002-VORNA P0002-NACHN INTO INT_PETROL1-NAME SEPARATED
BY SPACE.
ENDPROVIDE.
*-- Clear Data
CLEAR: RGDIR, INT_RGDIR.
REFRESH: RGDIR, INT_RGDIR.
*-- Read All The Payroll Runs For An Employee
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
CHECK RP-IMP-CD-SUBRC EQ 0.
*-- Clear Data
REFRESH: RT.
Read IN Cluster.
LOOP AT RGDIR WHERE FPBEG >= PN-BEGDA AND FPEND <= PN-ENDDA.
MOVE-CORRESPONDING RGDIR TO INT_RGDIR.
APPEND INT_RGDIR.
CLEAR INT_RGDIR.
ENDLOOP.
Read the last record.
SORT INT_RGDIR BY SEQNR DESCENDING.
READ TABLE INT_RGDIR INDEX 1.
RX-KEY-SEQNO = INT_RGDIR-SEQNR.
RX-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-IN.
CHECK RP-IMP-IN-SUBRC EQ 0.
READ TABLE RT WITH KEY LGART = P_LGART1.
IF SY-SUBRC = 0.
INT_PETROL1-PALLOWANCE = RT-BETRG.
ENDIF.
APPEND INT_PETROL1.
CLEAR INT_PETROL1.
SELECT TRFST PERNR
INTO CORRESPONDING FIELDS OF TABLE PER_NO
FROM PA0008
WHERE TRFST LIKE 'L%'
AND BET01 > 0.
SORT PER_NO.
DELETE ADJACENT DUPLICATES FROM PER_NO.
*-- END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT INT_PETROL1.
READ TABLE PER_NO WITH KEY PERNR = INT_PETROL1-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-TRFST = PER_NO-TRFST.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING TRFST.
ENDIF.
ENDLOOP.
SORT INT_PETROL1.
DELETE ADJACENT DUPLICATES FROM INT_PETROL1.
CONCATENATE 'From' ' : ' PN-BEGDA6(2) '.' PN-BEGDA4(2) '.' PN-
BEGDA+0(4)
' To' ' : ' PN-ENDDA6(2) '.' PN-ENDDA4(2) '.' PN-ENDDA+0(4)
INTO TITLE.
IF P_DI = 'X'. "TO DISPLAY PETROL ALLOWANCE ONLY
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
DIS_FLAG = 1.
ENDIF.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
CASES - NO RATE GIVEN, RATE GIVEN
CURRENT PERIOD UPLOADED BUT PAYROLL NOT WRITTEN SO NO RESULT FROM LDB
SELECT RATE INTO P_RATE FROM ZBPETROL_ALL WHERE BEGDA = PN- BEGDA AND ENDDA = PN-ENDDA.
ENDSELECT.
IF SY-DBCNT = 0.
MESSAGE I455(0) WITH 'NO PETROL RATE EXSISTS'.
ELSE.
FLAG = 1.
ENDIF. "OF SY-DBCNT
IF P_RATE > 0 AND FLAG = 1. " PETROL RATE EXSISTS.
SELECT PERNR SUM( BETRG ) INTO TABLE PA0015_DATA
FROM PA0015
WHERE BEGDA BETWEEN PN-BEGDA AND PN-ENDDA
GROUP BY PERNR.
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE PA0015_DATA WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
INT_PETROL-PALLOWANCE = PA0015_DATA-BETRG.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
DIS_FLAG = 1.
ENDIF. "P_RATE > 0 AND FLAG = 1.
IF P_RATE > 0 AND FLAG = 0. "CURRENT PERIOD AND DATA NOT UPLOADED
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
ENDIF. " OF P_RATE > 0
DIS_FLAG = 1.
ENDIF. " OF CURRENT PERIOD CHECK.
ENDIF. " OF CHECK DISPLAY.
*----BDC
IF P_UPLOAD = 'X'.
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
MESSAGE I455(0) WITH 'Petrol Allowance cannot be uploaded'.
LEAVE SCREEN.
ENDIF.
IF P_RATE > 0.
IF P_RATE > 0 OR P_RATE = 0.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
WA_PET_ALLOWANCE-BEGDA = PN-BEGDA.
WA_PET_ALLOWANCE-ENDDA = PN-ENDDA.
WA_PET_ALLOWANCE-RATE = P_RATE.
WA_PET_ALLOWANCE-CURR = 'INR'.
INSERT INTO ZBPETROL_ALL VALUES WA_PET_ALLOWANCE.
SELECT A~PERNR A~TRFST B~VORNA B~NACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON B~PERNR = A~PERNR
WHERE A~TRFST IN ('L1' , 'L2' , 'L3')
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
DIS_FLAG = 1.
SORT INT_PETROL1.
LOOP AT INT_PETROL1.
MOVE: INT_PETROL1-PERNR TO INT_0015-PERNR,
INT_PETROL1-PALLOWANCE TO INT_0015-BETRG.
CONCATENATE PN-ENDDA6(2) PN-ENDDA4(2) PN-ENDDA+0(4) INTO
INT_0015-BEGDA SEPARATED BY '.'.
APPEND INT_0015.
CLEAR INT_0015.
ENDLOOP.
LOOP AT INT_0015.
PERFORM F_BDCDATA.
IF P_FG = 'X'.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'A' UPDATE 'S'.
ELSE.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'N' UPDATE 'S'.
ENDIF.
*-- Handling Error records.
IF SY-SUBRC <> 0.
*-- Handling Error Messages
PERFORM ERROR_MSG.
MOVE-CORRESPONDING INT_0015 TO E_INT_0015.
APPEND E_INT_0015.
CLEAR E_INT_0015.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
*-- Downloading Error Records.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Errors.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = E_INT_0015.
*-- Downloading Error Messages.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Err_Msg.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = MSG.
ENDIF. " FOR CURRENT PERIOD
ENDIF.
ELSE.
MESSAGE I455(0) WITH 'Enter Petrol Rate'.
LEAVE TO SCREEN 0.
ENDIF. " FOR PETROL RATE
ENDIF. " FOR UPLOAD
IF DIS_FLAG = 1.
INT_LAYOUT-SUBTOTALS_TEXT = TEXT-004.
INT_LAYOUT-TOTALS_TEXT = TEXT-004.
INT_LAYOUT-ZEBRA = 'X'.
PERFORM FILL_FIELDCAT.
PERFORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = WS_REPID
IS_LAYOUT = INT_LAYOUT
IT_FIELDCAT = INT_FIELDCAT[]
I_DEFAULT = 'X'
I_SAVE = 'X'
IT_EVENTS = INT_EVENTS
TABLES
T_OUTTAB = INT_PETROL1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form GET_VALUE
text
FORM GET_VALUE.
GET PARAMETER ID: 'NUM' FIELD TEMP_NUM.
IF TEMP_NUM <> ''.
LEN1 = STRLEN( TEMP_NUM ).
PERFORM GET_PERNR.
APPEND TEMP_NUM TO EMPNO.
LOOP AT EMPNO INTO EMP_NO.
CALL FUNCTION 'CHECK_AND_CONVERT_NUMERICS'
EXPORTING
DFELD = ' '
DMZEI = ','
DTYPE = 'STRING'
DYPNO = ' '
EFELD = EMP_NO-PERNR
FNAME = ' '
PROGR = ' '
IMP_DECIMALS = '0'
IMPORTING
ERROR =
IFELD = EMP_NO1-PERNR
MESSG = ERR
MSGLN =
IF ( ERR-MSGID = '' ).
APPEND EMP_NO1 TO EMPNO1.
CLEAR EMP_NO1-PERNR.
ELSE.
MESSAGE I455(0) WITH 'Could not convert employee number'.
LEAVE TO SCREEN 0.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "GET_VALUE
*& Form GET_PERNR
text
FORM GET_PERNR.
SPLIT TEMP_NUM AT ',' INTO EMP_NO TEMP_NUM.
APPEND EMP_NO TO EMPNO.
CLEAR EMP_NO.
SEARCH TEMP_NUM FOR ','.
IF SY-SUBRC = 0.
PERFORM GET_PERNR.
ENDIF.
ENDFORM. "GET_PERNR
*& Form ERROR_MSG
text
--> p1 text
<-- p2 text
FORM ERROR_MSG.
IF SY-SUBRC <> 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
LANG = SY-LANGU
IMPORTING
MSG = MSG-MSG1.
APPEND MSG.
CLEAR MSG.
ENDIF.
ENDFORM. "ERROR_MSG
*& Form F_BDCDATA
text
FORM F_BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPMP50A' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=INS'.
PERFORM BDC_FIELD USING 'RP50G-PERNR'
INT_0015-PERNR.
PERFORM BDC_FIELD USING 'RP50G-TIMR6'
'X'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RP50G-CHOIC'.
PERFORM BDC_FIELD USING 'RP50G-CHOIC'
'0015'.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'Q0015-BETRG'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'P0015-LGART'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=UPD'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
ENDFORM. "F_BDCDATA
*& Form BDC_DYNPRO
text
-->P_0732 text
-->P_0733 text
FORM BDC_DYNPRO USING VALUE(P_0732) TYPE C
VALUE(P_0733) TYPE C.
CLEAR BDCDATA.
BDCDATA-PROGRAM = P_0732.
BDCDATA-DYNPRO = P_0733.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0755 text
-->P_0756 text
FORM BDC_FIELD USING VALUE(P_0755) TYPE C
VALUE(P_0756) TYPE C.
CLEAR BDCDATA.
BDCDATA-FNAM = P_0755.
BDCDATA-FVAL = P_0756.
APPEND BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CAL_ALLOWANCE
text
FORM CAL_ALLOWANCE.
LOOP AT INT_PETROL1 INTO INT_PETROL.
IF INT_PETROL-TRFST = 'L1'.
INT_PETROL-PALLOWANCE = P_RATE * 100. "CHANGE TO SELECT WHEN
DISPLAY
ELSEIF INT_PETROL-TRFST = 'L2'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L3'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L4'.
INT_PETROL-PALLOWANCE = P_RATE * 200.
ELSEIF INT_PETROL-TRFST = 'L5'.
INT_PETROL-PALLOWANCE = P_RATE * 250.
ENDIF.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING PALLOWANCE.
ENDLOOP.
ENDFORM. "CAL_ALLOWANCE
*& Form FILL_FIELDCAT
text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT.
INT_FIELDCAT-COL_POS = 1.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PERNR'.
INT_FIELDCAT-SELTEXT_L = TEXT-005.
INT_FIELDCAT-OUTPUTLEN = 10.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 2.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'NAME'.
INT_FIELDCAT-SELTEXT_L = TEXT-006.
INT_FIELDCAT-OUTPUTLEN = 25.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 3.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'TRFST'.
INT_FIELDCAT-SELTEXT_L = TEXT-007.
INT_FIELDCAT-OUTPUTLEN = 5.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 4.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PALLOWANCE'.
INT_FIELDCAT-SELTEXT_L = TEXT-008.
INT_FIELDCAT-OUTPUTLEN = 16.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
ENDFORM. " FILL_FIELDCAT
*& Form GET_EVENTS_ALV
text
--> p1 text
<-- p2 text
FORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 1
IMPORTING
ET_EVENTS = INT_EVENTS[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE INT_EVENTS INTO WS_EVENTS WITH KEY NAME =
SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
WS_EVENTS-FORM = 'TOP'.
MODIFY INT_EVENTS FROM WS_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM. " GET_EVENTS_ALV
*& Form TOP-OF-PAGE
text
FORM TOP.
*-- ALV Declarations
DATA: WS_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
*-- Title
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TEXT-009.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TITLE.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = WS_HEADER
I_LOGO = 'LOGO'.
ENDFORM. "TOP-OF-PAGE
regards
karthik
Edited by: KARTIKEYA (EDS-VZG) on May 5, 2008 1:41 PM -
Extract specific data packages from PSA
Hi all,
When loading 20 million records from the PSA to the DSO, 50 000 records (in 6 different data packages) have not been loaded (we got a dump).
Now we want to do a delta load only containing these 50 000 records. Is it possible to choose exactly which data packages to extract to the DSO? Or do you have other ideas we could test?
Thank you.hai,
it is posible .u click the tab comes under dtp...first u click the dtp.under the delta u choose get data by request...after tat u load the data...so the data loaded package wise...if any one not loaded then only load that package only...
thanks.
prakasu. -
Hello all
I have a xml file somthing like this
- <lbs-server>
- <location-results>
- <error>
<number>12</number>
<information>Invalid credentials</information>
<system method="NULL" />
</error>
</location-results>
- <server-time>
<date>13</date>
<month>6</month>
<year>2006</year>
<hour>15</hour>
<minute>10</minute>
<second>4</second>
</server-time>
<server-interface>1.0.5 uguduwa</server-interface>
</lbs-server>
Can i use somthing like getNodeValue(lbs-server/location-results/error/number) to retrive the error number from the above structure. if this is possible or alternative please explain with a sample code cause i am bit new to this techonlogy.
Thanks in advance
PrashTo retrive the error number from the XML file, you can use JDOM API, and say:
Document doc = builder.build(XML_File_Name);
Element root = doc.getRootElement();
Element lr_elt = root.getChild("location-results");
Element error_elt = lr_elt.getChild("error");
Element number_elt = error_elt.getChild("number");
String your_value = number_elt.getText();
JDom has features of both SAX & DOM Parsers. You can find more info on Jdom at :
http://www.javaworld.com/javaworld/jw-05-2000/jw-0518-jdom.html
http://www.oreilly.com/catalog/jenut2/chapter/ch19.html#AUTOID-14859 -
Hi,
Can any one tell me how to retrive the partial payment accounting documents from BSEG table as I
Can't use REBZG field of BSEG which is not a primary key ?
Regards,
Krishnam RajuHi
U need to get all payments and check if they are partial payment.
I don't know which kind of items (vendor or customer) u need to control, but if u need to check the customer payments:
- A) Select the payments from cleared items (BSAK table)
- B) Check if the field REBZG is filled
Max -
Data retrival from standard transaction
hi all,
i have to get the material list from stadard t-code ca80 i have debugged the program and the whole material list is in tmapl internal table so if any one can find me a solution thats ll be very helpful. and points are rewarded
thanks in advance
anupamahi,
You can call transaction and send the data to it.
call transaction mm01 and skip first screen.
set parameter ID 'MAT' FIELD P_matnr.
Here you are passin gthe selection screen parameters to the standard transaction MM01 and skip the screen..
you start recording like in BDC and execute it here.
so you will be having the data in the internal table that you can update in the Database table.
Regards,
Madhavi -
Hi,
i would like to retreive payroll results from it's allocated cluster tables using buffer.
i donot know how to use BUFFER concept and it's statments.
could anyone guide me in this topic?
thanks
theresita.jHi theresita,
i would like to retreive payroll results from it's allocated cluster tables .
1. U want the remuneration (monthly salary )
2. U won't get it DIRECTLY from any table.
(Its stored in cluster format)
3. Use this logic and FM.
DATA: myseqnr LIKE hrpy_rgdir-seqnr.
DATA : mypy TYPE payin_result.
DATA : myrt LIKE TABLE OF pc207 WITH HEADER LINE.
SELECT SINGLE seqnr FROM hrpy_rgdir
INTO myseqnr
WHERE pernr = mypernr
AND fpper = '200409'
AND srtza = 'A'.
IF sy-subrc = 0.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
clusterid = 'IN'
employeenumber = mypernr
sequencenumber = myseqnr
CHANGING
payroll_result = mypy
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10.
myrt[] = mypy-inter-rt.
READ TABLE myrt WITH KEY lgart = '1899'.
4. the internal table myrt
will contain what u require.
I dont think there is any buffering concept
involved in cluster table.
regards,
amit m. -
Data retrival from LDAP into SAP
Hi All,
I want to get the list of all the users and there relivent data from LDAP server....
How to do that from SAP...
Thr are certain FM's availables ,i dont knw how to use them...
If any one provide me with code ,i will be helpful...
every answer will be awarded...
Thnx
RohitHI
LDAP_OBJECT_CREATE
LDAP_OBJECT_DELETE
LDAP_OBJECT_READ
LDAP_OBJECT_SEARCH
LDAP_OBJECT_UPDATE
http://help.sap.com/saphelp_nw70/helpdata/en/0b/d82c4142aef623e10000000a155106/content.htm
[Refer Page No 12 |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/06187a32-0a01-0010-709b-e664a61eab08]
Regards
Pavan
Maybe you are looking for
-
Create a site utilization report for SharePoint Site with these conditions
HI, How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report a) The list of users who are accessing the site b) The list of users who have not accessed the site ( Can we do some f
-
When connecting to file server via smb shows no space available! Help!
We are running an XSERVE with Mac OS X 10.5.5 and have multiple clients that connect to it (mac and windows). For some reason yesterday one of the clients (10.4.11) when connects to the file share using the smb protocol shows up with 0kb available an
-
Adobe Classroom in a Book - Automated Editing to Markers
I am trying to learn Adobe Premiere in a class right now and we are using "Adobe Premiere Pro Classroom in a Book" as our text. On page 139, it is talking about automated editing to markers and no matter what I do, I cannot get the results that the b
-
Firewire output of Hardware MPE - I give up
Ok... I'll forget about IEEE1394 output of hardware MPE. I suspect it isn't likely to be resolved in CS.anything. The technical challenge of routing a DV signal from the CPU/GPU back through a firewire channel may be an insurmountable hurdle. But it'
-
I am having trouble with my iPad to be charged please can someone reply a good strategy that would help it ? I need it for school tomorrow