Data retrival step-by-step
how can i retrive step-by-step data from a table containing say 100 records. My intension is to retrive data between 60th and 75th records from the table. Any one kindly help me at the earliest .
http://asktom.oracle.com/pls/ask/f?p=4950:8:375475904943203825::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:127412348064,
Similar Messages
-
"Error 13 writing data in step 6: type mismatch" - Error during package run
Hi experts,
I am using SAP BPC 7.0 M and facing an issue while importing a package. I am encountering the error : "Error 13 writing data in step 6: type mismatch". The package is running successfully for some files but is failing for similar other files. The data is uploading successfully on server but still it is giving an error while conversion.
Thanks,
Regards,
Kamya NagpalHi All,
In continuation to the above message:
Even when the package is failing, the data is getting uploaded in the server.
Thanks,
Regards,
Kamya Nagpal
Infosys Technologies Limited -
Hi all,
One of our process chain failed at data loading step. In monitor screen the status tab ismessage as ::
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
In the error message option , I can see the
1) No Planning Version Selected ID SAPAPO/TSM IDno224
2) Errors in source System ID RSM IDno340
Please help me to resolve the issue.Hi
Right click on failed DTP --> select monitor.
here on top you will find "Job overview", select this
now check the job log of this DTP, you will come to know what the exact error is.
activate the objects related to this DTP ( i mean source and target).
Regards,
Venkatesh -
Data Acquisition Step Type - Tester Required
I have just created a Basic Data Acquistion step type for testsand ver 4.0, i require someone who is willing to test out the step type and just give me feedback on any relevant bugs , look and feel etc. I have attached a few screen shots of the demo i have created.
Attachments:
Front Panel.jpg 622 KB
demo.jpg 2759 KB
Dialog.jpg 647 KBData Acquisition usually refers to a DAQ board from NI so I think what you are looking for is a generic NI-VISA step type and a specific RS-232 step type. I have a NI-VISA step type that was originally written with LabVIEW 6.1 and for use with TestStand 2. I've atached that below. I don't have the .ini file handy and don't have time to recreate it but from the code, you should be able to see what needs to be added to the step properties. The basic step is a modified Pass/Fail Step.
It's not that difficult to create your own custom steps. I've done a lot and it only takes a little while longer than doing a code module in LabVIEW or CVI. The extra time is in creating the edit step.
I've got an RS-232 step type but part of it is product specific so it is proprietary and I can't post that. Look at the VISA example and the other examples of custom step types that are on the developer zone and see how far you get.
Attachments:
VISA IO.zip 188 KB -
How to use a query in matrix data retrive
hai everybody
how to use a query in matrix data retrive...
pls ..If u have created a UDT to store the data then U can retrive the data through recordset.
oRecordset.doquery("SQL Statement")
If u have taken the DB Data source to Manipulate then
then type
oMatrix.flushtoDataSource
then
U can retrive the data through DB Data source.
-Manmath -
Function Module for data retrival for work order clearence (WCA)
Hi All ,
Function Module for data retrival for work order clearence (WCA) for a particular Planning plant and (WCD's).
Thanks.Hi Anne,
BAPI_PRODORD_GET_DETAIL
BAPI_PRODORD_GET_LIST
You can find further FM in Function Group COPRINT and CODR or take F4 on CO* in Function Group
These will serve your purpose.
Cheerz.
Ram -
Hi,
I need some help in Data Federator. How to create Projects etc and connections?
What are the steps and how does it work with InfoView, WebI and Universe?
I will appreciate steps and charts besides guides.
Thanks
Bashir Awan7.created a calculated KF in the BW query and want it added to the universeu2026steps to transport the same
You will need to refresh the universe in Designer.
You can then transport the universe using LCM. -
Hi, is there a step type to perform Data Acquisition and Basic comm control such as RS232 and GPIB within teststand ?
This question was raised when I was training one of our Technicians today, he asked/suggested that having a step type which performs Data Acquisition and comm control would reduce there development time down dramatically, They have just started to use Teststand on small cycle test rigs as part of an evaluation stage. They have no experience with LabVIEW or CVI, they basically want a quick and easy way to produce a test sequence with Data Acquisition and comm control.
if there is anything like this at the moment can you possibly reply. If there is not, is this a something which will be avaible in the future ?
Message Edited by ds1638 on 12-09-2008 02:44 PMData Acquisition usually refers to a DAQ board from NI so I think what you are looking for is a generic NI-VISA step type and a specific RS-232 step type. I have a NI-VISA step type that was originally written with LabVIEW 6.1 and for use with TestStand 2. I've atached that below. I don't have the .ini file handy and don't have time to recreate it but from the code, you should be able to see what needs to be added to the step properties. The basic step is a modified Pass/Fail Step.
It's not that difficult to create your own custom steps. I've done a lot and it only takes a little while longer than doing a code module in LabVIEW or CVI. The extra time is in creating the edit step.
I've got an RS-232 step type but part of it is product specific so it is proprietary and I can't post that. Look at the VISA example and the other examples of custom step types that are on the developer zone and see how far you get.
Attachments:
VISA IO.zip 188 KB -
I have a project that entails tax forms from the IRS -- I know everyone's favorite stuff.
1)I need to setup a form that asks the webusers questions regarding their personal tax information -
2) then validate/massage that data/information and determine what PDF form template to output this data to. (possibly output to 4 forms determined by users response)
3) output the data collected in step 1 to the correct PDF template/form example template= http://www.irs.gov/pub/irs-pdf/f1040.pdf - applying the data to the correct fields - bascially filling out the users name, address, calculations etc.
4)allow the user to save/print/download the produced form in step 3
I know I am not the first person to need this functionality. Can you please simply answer my question - can this be done? Does it require software from other companies, or is this something that can be accomplished with just adobe products? If so, can you point me to some tutorials that show me the necessary process to do this?
I very much appreciate any support you can provide me - I need to start on this project yesterday.
Thanks in advance for your time.In your PHP code, change this -
$editFormAction = $_SERVER['PHP_SELF'];
to this -
?>
<?php
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "registreren")) {
// add your captcha verification code here ....
// captcha most likely ends with a header command to relocate failed attempts, so make sure you add
// an exit() command after that header. Otherwise, allow the successful captcha to fall into the following
// block of code.
// don't ignore that closing brace
?>
<?php
$editFormAction = $_SERVER['PHP_SELF']; -
MDM Data Manager step-by-step process with an example
Hi All,
I recently started reading MDM. I am clear with MDM-Console concepts. But I have problem with MDM Data Manager. I am confused with data entries in qualified tables, work flows(using microsoft studio), Matching mode- rules(High treshold, low threshold) etc.. I read material posted in forums- but still I am not clear.
I need a step-by-step process for data entries with *examples*. A good example which covers all Data Manager concepts. PDF's with screen shots, videos any thing would help.
Please help me......It would be of great help.
Thanks in Advance.
SuchirHi Suchir ,
MDM 5.5 has 4 MDM clients to perform 4 main functionality on the MDM master records.
- Console- This is where all the Administrative work is performed
- Data Manager- This is where the actual maintainence work is done on the master data like consolidation deduplication etc.
- Import manager- Thsi is from where the source matser records are taken into MDM repoistory
- Syndicator- This is from where teh consolidated master data is send back to the target systems.
MDM Data Manager is the heart of MDM
The activities that can be performed in the MDM Data manager are:
- Data Consolidation
- Data Validation
- Data Deduplication
- Data Assignment
- Data Governanace
etc......
Qualified Table:
- Qulaified tables are used to store relational records where one field value is determining the other field or fields value.
- Qualified tables are maintained in Console and can be viewed in Data Manager
- Qualified Table are viewed under a separate section in Data Manager in the right hand side.
- Qualified table has Non qualifiers and Qualifiers.
- Non qualifiers can be seen in the Qualified table and in the linking Qualified field
- Qualifiers can be seen separately under the Qualified section in the data manager
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a15239-684e-2b10-b8ae-b936b7d1c1fe
Workflows
- Workflows are designed in MDM for Governanace
- You can create the MDM workflow using the MS Visio 2003 stencils in the MDM Data manager in the record mode under the workflow table
- The saved workflow in DM can then be executed either mnaully or automatically based on teh trigger actions
- The trigger action for teh MDM wf are record Add,Update,Import,Manual
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167 (MDM Workflows Overview)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40 (Demo of MDM Workflows)
Matching Mode
- This mode is exclusively for Master data deduplication
- We need to create Rules,Strategies,Transformation in MDM data manager in teh record mode
- Then you need to run these strategies on the selected records
- Based on your score and threshold set in the strategy MDM will identify duplicate records
- This score will be seen in teh Matching mode
- Colour coding is used along with scores to find out dupliactes
- Green - 100%dupliacte Blue- 50?% Red- No duplicate
Kindly refer the below link to know more on this:
/people/michael.reil/blog/2006/05/18/mdm-matching-strategies-for-master-data-consolidation (matching merging in mdm)
Hope It Helped
Thanks & Regards
Simona Pinto -
Event Data Change step- Failure
Hi All,
I have a failure in event data change process in a process chain.
It has identified 2 packages for change.
One package has successfully been done.
While processing of second package, the job BCAST**** failed as logon to BW system with user ID specified failed.
I know that the user-id does not exist., but am not able to find out of where the to change the user id for the job BCAST*** to run successfull.
when i click displaying messages, it shows
Step 001 started (program RSPROCESS, variant &0000001212711, user ID BWEXTRACT)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job
BIBCAST4AN61630VW21F4LTLVP2QED68 with ID 08254800
The job BIBCAST4AN61630VW21F4LTLVP2QED68 failed as logon was not possible.
Please suggestHai ,
Its right you get the owner name in the table after changing the right user id there .
In broadcast setting screen itself say for EX broadcast email
below you give the recepient address
after that you have the Authorization user box where you can directly change to right id if you have the proper authorization attached to your user id .Remmember to save then schedule & execute when you trigger for first time.
This step is related to the role attached to your user access ask basis guy or instead of transporting from development do the broadcast setting directly in production with right EP access.
hope it would sove your issue. -
Passing large amount of data between steps
Hello,
in my application, I developed some step types for data acquisition and analysis.
I need to pass large arrays (>100000 points) from one step to another.
Actually I pass the sequence context, and I use Variants to retrieve data (in the second step).
This method seems however quite slow.
Has anyone any suggestion?
I use TS3.5 and CVI 8.0
Thank you
balossHi,
You should be able to pass the data back directly via the parameter list of the function and like wise directly into the next function without having to use the sequence context.
Regards
Ray Farmer
Regards
Ray Farmer -
My Health app does not show anything for steps, walking + running and flights climbed. A few blogs say this shows up atomically. Do I need to set Data Source to my phone? How do I do that? Even when I go to Steps through the menu it still says "No Data"
*Automatically
I linked MyFitnessPal and that shows calories just fine. -
Hi expert,
What will be the steps to transport master data in BI 7? I have transported relevant R/3 data source and then replicated data source in BW. Then I start collecting BW info objects for the master data. When collecting BW info objects for transport, do I need include data source, transfer rule and info pacakges? If so, why do I need to collect data source again in BW system as it has already been replicated from the source system?
Thank in advance for any advise.
SharonHi,
The procedure for loading master data in 7.0 is :
1. Create / Activate your data source for the info object you want load - for example data source for attributes, text ot hierarchy - SAP R/3
2. Replicate data source in SAP BW
3. Create Data Transformation ( similar to Update and Transfer rules) between Data Source and Info Object
4. Create DTP ( data transfer process) to maintain the data flow . Here you have to specify that data comes from Data Source and goes to the Info Object.
5. Create an Info Package on the Data Source and load data - !!! have in mind that this will load data only into PSA table
6. Final step - you have to start your DTP - this will load data from PSA to the Info Object.
For the majority of Master Data, there will be datasources in Business Content. need to install Business Content . This will install all datasources that you require - Customer, Material etc. plus all standard config - DSO, Cubes etc.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Pls Check the following threads for DTP
DTP EXPLANATION
Delta DTP request in Yellow color
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbd598481e1a61e10000000a422035/frameset.htm
Hope this helps,
Regards
CSM Reddy -
Data migration steps using transportation number
Hi Gurus
Please tel me the steps in data migration from Development server to quality and from quality to Production using Transport number.
Thanks and regards
Praneshfor different servers
suppose you make TR at development server, go to se09 and release it
go to the other server (quality or production) and import the same with help of BASIS team.
for same server
suppose you make TR at development client,
go to scc1 and import the same ( to quality)
Maybe you are looking for
-
Travel Overseas Italy: Comprehensive Task List
I will be traveling to Italy in January from my base in New York. Since this is my first time taking a Verizon phone overseas, I have spent some time researching the Verizon web site to prepare myself for a journey with minimal problems. You’ll find
-
Web Dynpro Java - Light Portal Desktop
Hi Guys... I have a web dynpro java application that I want to display on a Light Portal Desktop, but when I display the iview... it gets cut. I mean I can see only part of my application and there is also a right scroll bar... It looks like the heig
-
How do I get a new tab to automatically open showing the google search page?
When I open firefox, I see my google home page but when I open a new tab it shows the searchnu home page. It used to be blank and I don't know how or why it changed, but can you tell me how to get my tabs to open automatically showing www.google.co.u
-
Reflection objects and thread safety
Hi, I believe that I saw that Field and Method objects are thread-safe (i.e., can safely have methods called against a single object instance concurrently from multiple threads), but am having trouble finding such a description in the JDK javadocs st
-
Work computer won't display songs
Okay, so I have been running my I-pod on my work computer. It was working just fine for months. All of a sudden i plugged in the I-pod and a new name for the I-pod popped up. On top of that, it would not display my songs from my i-pod. They are not g