Data roaming setting does not show up on iPhone 4S

My wife got a new iPhone 4S from Verizon a few weeks and and she's been using it with no probolems since then. Yesterday we crossed the board into Canada and I tried to turn "Data Roaming" off on her phone but the "Data Roaming" setting does not exist in Settings->General->Network. On my Verizon iPhoen 4S it has the optios "Voice Roaming" and  "Data Roaming" but on hers only "Voice Roaming".
I was able to turn off all cellular data but that's actually inconvenient because we're right on the border and often go in an out of US cell converage areas, so with data roaming off it lets me use data whenever there's a US cell signal and otherwise prevents me from using data on a Canadian signal, but with all cellular data off, you have to constantly be toggling the setting when you think you go from a cell tower in the Canada to one in the US.
Does anybody have any idea why the "Data Roaming" setting does not exist on her phone yet it does on mine? Both phones are running iOS 5.0.1.

On your wife's phone: Dial *228. When prompted, select 2 to update her roaming capabilities. When complete, you will hear a confirmation message. In about a minute, you will also see an alert that your service update is complete. See if doing that fixes things.

Similar Messages

  • SSIS Data flow item does not show on the Tools Choose Tools Item

    I would like to add share point to my data source for my SSIS project.
    After I installed Share Point Source and Destination list, I went to Tools Choose Tools Item, but SSIS Data Flow tab does not show. I went to SSIS Tools box, but the components are not there.
    I would like to know are there any way to add Share Point Data source using SSIS.
    Your help and information is great appreciated,
    I use SQL Server 2012 and VS 2010.
    Regards,
    Souris,

    Hi Souris,
    I have installed the SharePointListAdaptersSetup-Beta-2012-01-28.msi in my SQL Server 2012 test environment, the SharePoint List Source and Destination adapters is listed in the Common type items of the SSIS Toolbox. To narrow down the root cause, please
    try the following steps:
    Make sure the SharePointListAdapters.dll exists in the C:\Program Files (x86)\Microsoft SQL Server\110\DTS\PipelineComponents folder.
    Make sure it is installed to GAC successfully, the SharePointListAdapters.dll should exist in C:\Windows\Microsoft.NET\assembly\GAC_MSIL\SharePointListAdapters\v4.0_1.2012.0.0__f4b3011e1ece9d47 folder.
    Refresh the Toolbox and check the Common type items.
    Since the SharePoint List Adapter is a third-party component, I would suggest you ask a question in its dedicated discussion plate:
    http://sqlsrvintegrationsrv.codeplex.com/discussions
    Regards,
    Mike Yin
    TechNet Community Support

  • When I reply from my Imac the message does not show on my Iphone 5

    HELP!! when I reply from my Imac the REPLYmessage does not show on my Iphone 5!!

    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • On my iPad reminders has a list called scheduled but this list does not show in my iPhone or Mac Pro book what Di

    On my iPad reminders has a list called scheduled but this list does not show in my iPhone or Mac book pro. What do I need to do to have scheduled reminders on my iPhone and MacBook Pro?

    iBooks appear in the separate iBooks app in OS X 10.9 Mavericks.
    Audible handles only audiobooks. They can't help with any issue with an iBook.
    Regards.

  • Date format MMMM does not show in Chinese

    Hi,
    I hope someone can help me with this issue.
    The MMMM month format does not show up correctly in Chinese locale. It shows up as []
    I just don't know what to do...
    Has anyone encountered the same issue?
    I would greatly appreciate it if you could help me.
    Thanks!

    The problem is that on the page the encoding is ISO-8859-1 even though I have UTF-8 on all pages.
    I also did what they suggested here [http://www.sitepoint.com/forums/showthread.php?t=610332 |http://www.sitepoint.com/forums/showthread.php?t=610332]
    I changed all the xsl files and everywhere that the encoding was getting set to UTF-8 [http://www.javaworld.com/javaworld/jw-05-2004/jw-0524-i18n.html?page=1|http://www.javaworld.com/javaworld/jw-05-2004/jw-0524-i18n.html?page=1]
    It's still not working. Any idea what i need to do??? BTW I'm using Struts.
    I would greatly appreciate it if anyone can help me with this.
    Thanks!
    Edited by: Karmela on Apr 27, 2009 1:53 PM
    Edited by: Karmela on Apr 27, 2009 1:54 PM

  • When i download a new app on ipad it does not show up on iphone

    I have icloud turned on on my ipad and iphone but when i download a new app on my ipad or iphone it does not always show up on the other.  Its getting very aggravating and I have no idea how to fix this!!!!!!!!!

    Make sure the app is supported on both devices. Some apps are iPad only. Also make sure they are supported by the iOS version on each device if they are running different versions of iOS.
    Turn on automatic downloads on both devices:
    Settings > iTunes & App Stores > Select items you want to download automatically fom the Automatic Downloads section

  • Paragraph setting does not show paragraph

    I am new to CS4 but in the past (CS3) when I set paragraph at the extreme left of the control panel it would show me my paragraph style. (See Screen shot) In CS4 it shows font type and size. Is this normal for CS4? Or have I a problem?
    Thanks
    Ian

    On the far right of the toolbar you have a more options drop down menu . Under here you have customize/Paragraphs. Have a look to see if Styles are checked.

  • Data in itab does not show when using FM REUSE_ALV_POPUP_TO_SELECT

    Hello Experts,
    I am using the said FM to display some data when the user clicks on a
    custom button I made. But no data is displayed in the popup window. I
    debugged it and the itab I am passing has a value in it. Below is my code:
    WRITE icon_green_light AS ICON TO wa_legend-legend.
            wa_legend-column      = text-t05.
            wa_legend-description = text-d01.
            APPEND wa_legend TO lt_legend.
            IF sy-subrc <> 0.
              MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ENDIF.
            DEFINE m_fill_fieldcat.
              wa_fieldcat-fieldname = &1.
              wa_fieldcat-tabname   = &2.
              wa_fieldcat-seltext_m = &3.
              wa_fieldcat-icon      = &4.
              wa_fieldcat-outputlen = &5.
              append wa_fieldcat to lt_fieldcat.
              clear wa_fieldcat.
            END-OF-DEFINITION.
            m_fill_fieldcat 'LEGEND'      'ITAB' text-t04 'X' '14'.
            m_fill_fieldcat 'COLUMN'      'ITAB' text-t11 ''  '50'.
            m_fill_fieldcat 'DESCRIPTION' 'ITAB' text-t12 ''  '50'.
            CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
              EXPORTING
    *           I_TITLE                       =
    *           I_SELECTION                   = 'X'
    *           I_ALLOW_NO_SELECTION          =
                i_zebra                       = 'X'
    *           I_SCREEN_START_COLUMN         =
    *           I_SCREEN_START_LINE           =
    *           I_SCREEN_END_COLUMN           =
    *           I_SCREEN_END_LINE             =
    *           I_CHECKBOX_FIELDNAME          =
    *           I_LINEMARK_FIELDNAME          =
    *           I_SCROLL_TO_SEL_LINE          = 'X'
                i_tabname                     = 'LT_LEGEND'
    *           I_STRUCTURE_NAME              =
                it_fieldcat                   = lt_fieldcat[]
    *           IT_EXCLUDING                  =
    *           I_CALLBACK_PROGRAM            =
    *           I_CALLBACK_USER_COMMAND       =
    *           IS_PRIVATE                    =
    *         IMPORTING
    *           ES_SELFIELD                   =
    *           E_EXIT                        =
              TABLES
                t_outtab                      = lt_legend[]
             EXCEPTIONS
               program_error                 = 1
               OTHERS                        = 2.
            IF sy-subrc <> 0.
              MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ENDIF.
    Hope you can help me guys. Thank you and take care!

    Hi,
    check this code and modify your FM accordingly then it'll work,
    Q. i_checkbox_fieldname = 'CHECKBOX'
    A. If the table output in the popup has checkboxes at the beginning of the rows (e.g. for multiple selection), the internal table must contain a field containing the value of the checkbox.
    Assign the name of this field to the parameter I_CHECKBOX_FIELDNAME.
    Q. i_tabname = 'TLINE'
    A. This is the name of ur input help internal table
    Q. it_fieldcat = fieldcat[]
    A The table u gonna display has to have a fieldcat.
    Q. it_excluding = extab[].
    A. In case u wanna exclude some functions.
    Below is a working example, paste it in se38 and activate.
    !!! Warning SAVE IT AS A LOCAL OBJECT !!!
    report ztests1.
    type-pools: slis.
    data: index type i.
    data: l_kunnr like kna1-kunnr.
    data: input(10) type c,
    text(4) type c,
    text1(5) type c.
    data: begin of itab occurs 10,
    kunnr like kna1-kunnr,
    name1 like kna1-name1,
    end of itab.
    data: e_exit.
    data: fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    parameter: p_kunnr(10) type c.
    at selection-screen on value-request for p_kunnr.
    select kunnr name1 up to 10 rows
    from kna1
    into table itab.
    fieldcat-tabname = 'ITAB'.
    fieldcat-fieldname = 'KUNNR'.
    fieldcat-seltext_m = 'Cust'.
    fieldcat-ddictxt = 'M'.
    fieldcat-outputlen = 10.
    APPEND fieldcat.
    CLEAR fieldcat.
    fieldcat-tabname = 'ITAB'.
    fieldcat-fieldname = 'NAME1'.
    fieldcat-seltext_m = 'Cust Name'.
    fieldcat-ddictxt = 'M'.
    fieldcat-outputlen = 30.
    APPEND fieldcat.
    CLEAR fieldcat.
    CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
    I_TITLE = 'Customer Selection'
    I_SELECTION = 'X'
    I_ALLOW_NO_SELECTION =
    I_ZEBRA = ' '
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    I_CHECKBOX_FIELDNAME =
    I_LINEMARK_FIELDNAME =
    I_SCROLL_TO_SEL_LINE = 'X'
    i_tabname = 'ITAB'
    I_STRUCTURE_NAME =
    IT_FIELDCAT = fieldcat[]
    IT_EXCLUDING =
    I_CALLBACK_PROGRAM =
    I_CALLBACK_USER_COMMAND =
    IS_PRIVATE =
    IMPORTING
    ES_SELFIELD =
    E_EXIT = e_exit
    tables
    t_outtab = itab
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    seshu.

  • Folio does not show on my iphone

    I created an app for the iphone and my folio/article shows up fine in DPS. But when I try to view in the content viewer on my iphone 4 it doesnt show up in the library. Am I missing a step in DPS? Or not seeing a hidden button in the library? I published it in DPS, but still nothing.

    I set it up as vertical orientation only and specified in the properties in my folio builder. When I published in DPS it asked for a horizontal layout view so I created a PNG file. Maybe a dumb question... but can I view it on my I phone without publishing it? The folio is fine when I just previewed it. Although a message came up before it started that "folio has a more recent source on my local system". Will try re-producing to DPS again and see what happens.

  • HT201365 my device does not show in Find Iphone

    i'm unable to trace my iphone device in Find Iphone. icloude setting is ON

    Hi cheski48,
    If you are having issues with your iPhone not connecting or being recognized on your computer, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • Apps does not show on my iPhone 6

    App icon is not on my iPhone 6?

    The Show installed apps or App Store suggestions for apps relevant to your current location, on the lock screen and in the app switcher
    means that on the phone's taskbar (which shows when you double-click the home button) and on the lock screen (where you slide to unlock the screen) that apps that you have installed that are applicable to your location will be shown (or new apps in the App Store will be shown) - I don't have it 'on' but I assume that it means things such as local travel/info apps etc.
    If you don't have any restrictions enabled, and the Settings > General >Restrictions > Installing Apps shows and is not 'off', then you've tried finding it via App Store app via phone's search screen (pull down the centre, not from the very top, of the homescreen) ?

  • ITunes match does not show up on iphone

    I just enabled iTunes match after it took forever to synch up on my computer, it told me to go to settings -> music and turn on iTunes match. I don't have that option on my iPhone 4 running iOS 5. What is wrong?

    iTunes Match has not been released yet.

  • Artists does not show correctly on iphone

    I imported a CD into itunes (amongst 100's), then synched with my Iphone 6.  The CD transferred, but the artist shows as "Unknown Artist" on the phone, but correctly in Itunes.  Any Ideas?   When I access the slbum from the "unknown artis" it shows the correct artist just like other CDs. I have many other albums by this artist that are grouped together correctly.  CD is "Electric" by the Pet Shop Boys.

    In iTunes on your Mac or PC, click on the album, and Get Info. Edit the info there, and resync the iPhone.

  • Metric shows real time value but does not show historical data

    I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
    I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
    When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
    When I check metric value history,
    For all the columns like Last Known Value,
    Collection Time stamp,
    Average Value,
    High Value,
    Low Value
    it shows no data.It even does not show anything in Metric Value History graph.
    Even the metric test in Metric Extension works fine.
    All the client agents are uploading the the data to OEM successfully.
    Any help,guide is appreciated.

    bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

  • Oracle apps Data does not show in Discoverer

    When running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record. Anyone knows how to handle this?

    Hi,
    There can be many reasons why a Discoverer report does not return data, but I don't think it will be because the session is not apps initialized. Check that the language has been set correctly, using the calculation userenv('lang').
    As I don't know anything about your environment, it is a bit hard to guess what else might be causing this issue. Is there anything different about this report? What is the custom query that you are running?
    Rod West

Maybe you are looking for

  • IChat webcam with non webcam user

    I want to set up iChat video conference with my family back in Georgia. They all have Google Talk log ons and I have successfully text chatted with them but I never see where I can invite them to video chat with me. They don't have web cams but I wan

  • BRF+ Standard Integration into ICM

    Hi gurus, here: http://help.sap.com/erp2005_ehp_05/helpdata/EN/5f/b367185c4f41ccbdeb4e383d516a68/frameset.htm is a guide on how to enable BRF+ to be used as a valuation or remuneration tool in the ICM through the customizing. However, after doing all

  • Cannot function ship the following expression: Evaluate

    hello i used a db function in rpd EVALUATE('X.F_REPLACE_NEG_VAL_TO_ZERO(%1)' AS DOUBLE PRECISION , "Stock"."Fact - Inventory"."Vol") the functions purpose is to put to zero the measure in case its <0 when i use this measure in answers it works fine;

  • Compairing a form submission using cfselect to a db record

    Hello; I am writting a small contact form. I want to use cfselect so it will be populated with all the states.I have it working fine, my problem is, when the email is sent from the form, it sends the ID of the state, not the actual state name.I am tr

  • Mac Menubar applet for Xfce/GNOME panels!

    AUR: for Xfce 4.4 | GNOME  2.16 It's in my repository ("xfce4-macmenu-plugin" and gnome-macmenu-applet): [AqD] Server = http://people.os-zen.net/aqd/repository You also need gtk2-aqd >= 2.10.6-2 from my repo and xfce 4.4 from shadowhand's or gnome 2.