Data saving in the Past

Hi,
I want to save the data in the past in a key figure copying another series of data from the processing area using macro. The data is getting displayed by using the macro but with saving the data in the planning table the data getting disappeared.
Please suggest.
Regards
Aniruddha

Aniruddha ,
I dont understand what you mean by planning table. Can you please elaborate on that ?
Also is the key figure to which you save the data an auxillary key figure ? If so the data will not get saved . Could you please check that.
Also iam not sure what your exact business requirement is. In general you can back up the data to an info cube and it can be used for reporting also.
Thanks
Saradha

Similar Messages

  • Start date is in the past: today scheduling

    Dear all,
    How can I fix that error:
    *Start date is in the past: today scheduling*
    *Message no. C7030*
    Diagnosis
    The start date determined in scheduling is in the past.
    In customizing, you have defined the number of days that the start date is allowed to be in the past.  This number is exceeded.
    System Response
    "Today" scheduling is carried out.
    how can i definea new number of days ???????????

    Open ur project in Planning board then go to "Settings->options"
    and enter number of days in the "Start in past" filed more than difference between todays date and Project Start date. Then Scheduling will consider the Project start date as Scheduling start date. Otherwise system will do "Todays scheduling" and it will reset the Project start date to todays date.
    Venkat

  • Where is the data saved in the srtucture for a particular tcode

    Where is the data saved in the srtucture for a particular tcode.
    For eg in MM01 there is a field with RMMG1
    where dioes the data get saved from this field as in backend it shows the stucture and the structure can hold data only at runtime,
    Please help me
    Thanks in advance
    chinnu

    Hi,
    The strcuture : RMMG1 holds data at run time only that to it can hold only one record at a time.
    so we use this structure to hold data at run time and then we insert those values into database tables for that program.
    Here you can the values stored and processed in the program in the tables : MARA (for matnr ,mbrsh,mtart..),MARC (for Plant ),MARD( for storage location : lgort )...etc.
    so if you want to fecth some data means first you have to choose right table to fetch information by passing values in the selection screen.
    Regds
    Sivaparvathi
    Please reward points if helpful...

  • Data types, msg types, where these data saved in the server?

    In XI we are creating the data types, msg types, ...... where these data saved in the server ?

    Enter CL_SRAPI* in the SE24 transactions and make your search as shown below.
    CL_SRAPI_DATA_TYPE----
    data type
    CL_SRAPI_DATA_TYPE_ENH----
    data type  enhancement
    CL_SRAPI_FAULT_MESSAEG_TYPE-----fault message type
    CL_SRAPI_MESSAGE_TYPE----
    message type
    CL_SRAPI_INTEGRATION_SCENARIO----integration scenario
    Communication channels are saved in the SMPREL3 database table.

  • How to write a sql query to retrieve data entered in the past 2 weeks

    Hi,
    I have file names and last accessed date(java.sql.Date format) stored in my database table, I would like to know how I can write a query to get the name of files accessed in the past 2 weeks,I use open sql server at the back end.
    Thanks in advance.

    This has essentially nothing to do with JDBC. JDBC is just an API to execute the SQL language using Java and thus interact with the databases.
    Your problem is related to the SQL language, you don't know how to write the SQL language. I suggest you to go through a SQL tutorial (there is one at w3schools.com) and to read the SQL documentation which come along with the database in question. A decent database manfacturer has a website and probably also a discussion forum / mailinglist as well.
    I'll give you a hint: you can just use equality operators in SQL like everywhere. For example: "WHERE date < somedate".

  • Basic start date and finish date changing in the past

    Hello Gurus,
    I set the scheduling parameters as " Do not adjust basic dates, dep rqmts to order start " and also assigned the priority to populate the basic finish date. System does calculate the finish date based on the priority and start date as current date but it does allow me to change both dates in past or future which should not happen.
    Please do note that I activated the defaulted date as current date as well. Even I removed this mark and did not work.
    Please let me know if there is any way to restrcit the changing it alteast in the past.
    Mahee

    This can be prevented using one the following ways depending upon your needs
    ---> Set the "start in past" field to appropriate value using transaction OPU7 for order type /Plant combination
    ---> Make the "Basic start date  and Basic end date" fields as "Display only" through the Field selection config for the order type.
    ---> Use the user exit on "SAVE" of the order to check for the same
    Regards
    Narasimhan

  • Where IR and ID data saved in the XI server

    We configure IR and ID, where that IR and ID data stored in the XI server.
    When we active the IR we got that data in ID how its possible and both are saved uin different locations in server or same ?

    Venkat,
    Repository API’s are stored in the <b>SE24</b> class builder that can be used for accessing repository objects from the ABAP stack of SAP XI.
    Enter <b>CL_SRAPI*</b> in the SE24 transactions and make your search as shown below.
    CL_SRAPI_DATA_TYPE----
    <b>data type</b>
    CL_SRAPI_DATA_TYPE_ENH----
    <b>data type enhancement</b>
    CL_SRAPI_FAULT_MESSAEG_TYPE-----<b>fault message type</b>
    CL_SRAPI_MESSAGE_TYPE----
    <b>message type</b>
    CL_SRAPI_INTEGRATION_SCENARIO----<b>integration scenario</b>
    For more info chek this blog.
    /people/sravya.talanki2/blog/2007/01/11/ripping-off-sap-xi-stack-133sharing-the-goodies-of-abap-api146s
    Regards,
    Sarvesh

  • Where will be the IDOC  data saved when the receiving system is not ready

    where will be the idoc data  saved  data when the receiving system is not ready

    Hi karthik,
    If the receiving system is not ready ,
    the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
    regards,
    Prasad kodi.

  • Planned order start date is in the past

    Hi Experts,
    I am running MRP with lead time scheduling (2) at my production plant. The planned orders are generated against the requirements but the start date of the planned order is in the past. I have not mentioned anywhere in the configuration allowing the scheduling in past. I cross checked plant parameters, MRP group, settings for determining basic dates & scheduling parameters and every where start in the past check is blank.
    Since the planned order basic dates are calculated based on in house production time in material master, I maintained the lot dependant times in work scheduling view (Set up & processing time with base qty). But system is not considering this in MRP run. But its considering the lot independant inhouse prod time maintained in work scheduling view in MRP.
    Is there any other check to be maintained or system limitations? Your expert view on this please.
    Appreciate an early reply.
    Thanks & Regards
    Prathib

    Check OPU5
    S Anil

  • Interleave​d data saving and the TDMS Viewer VI.

    Hello,
    I'm using LabVIEW 2009 Service Pack 1 ( ver 9.0.1 32-bit ).
    I was trying to take a piece of data and save it in interleaved mode.
    The save operation seems to be completed correctly, but when the TDMS Viewer VI is launched it crashes, and I'm unable to browse the data.
    I'm attaching the example I used.
    What I want to know is:
    1) am I using the write properly? What I'm trying to acomplish is to push down an array if I16 to a TDMS write block, recieve 30 channels of data this way.
    2) I managed to use this VI and it crashes, on two PC's, one is a win7 32bit, the second one was an XP. But let me know if this runs properly for you.
    Maciej
    Attachments:
    InterleavedDataErr.zip ‏16 KB

    I have a buffer that can accumulate up to 65536 I16 values.
    In that buffer I get for example 6x 10000 values.
    Every "chunk" of the 10000 values is my interleaved data. One point is one channel.
    My data is shaped like in the opening post:
    http://forums.ni.com/t5/LabVIEW/TDMS-Streaming-in-​interleaved-mode/m-p/1189201#M513943
    Since I'm running a windows machine, sometimes I'll get 5x 10000 values, sometimes it will be 3x , sometimes 6x during one buffer swipe.
    The data rate and the channel length is variable.
    But let's talk about one case:
    10k channels and 10 kHz rate of I16 vals.
    That gives me roughly 200 MB/s of data that I need to get out of the buffer.
    What I want to do on my PC is take that data, and save it interleaved to a TDMS file, while being able to safely stay above the 200 MB/s.
    I would be intersted in aiming for 300 MB/s so that if we push our card further down the line, I'm not stuck with the streaming bandwitch.
    I have noticed that unfortunately if you use an ammount of channles that is 10000 the writing performance drops dramatically.
    What I figured out is that I'm not conducting 1 write on 10000 channels on a small ammount of data. But rather than that a large accumulated amount of data (like 8000 x 10000 of I16)
    And I split the save of 10000 channels into 10x 1000 channels save.
    First channs from 0-999 , than 1000-1999 etc.
    All is done in interleaved mode.
    This is Very Very fast indeed. I got rates of 360 MB/s. That's smoking fast!
    Now the trick is... to handle the appropriate data shaping in the RAM, from my buffer, to the large shaped RAM chunk, that will be cut in to pieces for Streaming. LV is designed for data flow and copies data a lot, hence I get easlity in the out of memory problem, I'm going to have to use some ticks like storing the data structure via a VI Server call, or perhaps queues don't know yet. But I'm going to do some reading on that and it seems that this should be achieavable.
    Thank you both for your input,
    I will post if I get stuck.
    Maciej

  • Loading date/planned GI date fall in the past dates

    Hi All,
    we have an outbound delivery created with reference to a sales order, the delivery was created on 6/21, but we found that we have past date in this delivery as below:
    - Transportation Planning   05/19
    - Loading Date                  05/19
    - Planned GI                     05/19
    I go back to check the schedule line of one of the item in the sales order:
    I got:
    Delivery date                    07/10
    Goods issue date             07/10
    Loading date                    07/10
    Material avail.date             06/21
    Transportation Plan. Date  07/10
    Why these date can not transfer from the SO to the outbound delivery? Please help and advice,
    Thanks,

    check the copy control setting from order to delivery using tcode VTLA.

  • My parents have one apple id and me and my two other siblings are getting our own. How can I transfer the data saved on the parent apple id to all three kids apple ids?

    Me and my siblings all want our own apple ids, and my mom has the apple id that has all of our games, apps, movies, and music on there. how can we copy the data onone apple id to the three kid accounts?
    thanks!

    Sorry, but unless I misunderstand what you're asking, you can't. Purchases from the iTunes Store are permanently tied to the Apple ID through which they were purchased. If your parents want you to be completely independent of their Apple ID and iTunes Store account, you'll each have to re-purchase the apps, etc. Otherwise they'll have to continue to allow you access to their account, or will have to do all the updates for you.
    Regards.

  • How can I find out my data usage for the past 3 months?

    Greetings all, I have been a long time Verizon customer, and as such I, along with my husband, was grandfathered into the unlimited data plan. When I last spoke to a representative, they informed me that the only way we were going to be able to keep our unlimited data was by paying the full retail price ($600+) to get a new phone. So we were considering upgrading and changing to one of the newer data plans so we could still get the discounted price on the new phone, but I would like to make sure I choose one with enough data, without paying for a bunch of data that I don't use, however MyVerizon only shows me the amount I have used since the start of the billing cycle. Is there a way to find out the data usage for both my husband and myself for the last 3 months so I can choose the right option?
    Thanks in advance for your help!

        Hello sweetpea1221! How exciting that you're considering upgrading with us. mrhelper is helpful, indeed. You can view your data usage for each line under the View Bill option via your My Verizon account. You can also view your 3 month average  data usage with our Account Analysis feature. Here's a link that will be helpful in doing so http://bit.ly/vnLjqO. I'm confident that we have a great plan to match your data needs. Please let us know if you have further questions.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • IText MMS Messaging and Data HORRIBLY Slow the past 2 or 3 months.

    AT&T is my carrier and I have unlimited data from a grandfathered plan. Last month I kept getting data warning messages on my phone saying I was near the end but it's umlimited.
    It takes about 6 minutes to send a picture through iText and my data speeds are just awful if I am not on Wifi.

    Blackthidot,
    Have you tried plugging your phone into the computer and running an update?  My iphone used to freeze up all the time, but I found that running updates always solved the problem.
    Hope it works out

  • Where is data saved on the Kindle Fire?

    Kindle Fire
    Have looked/searched and can't figure out where my app saves the data file.
    Is it a .sol file like the desktop? Location? 
    As always...
    Thanks in Advance!!

    Are you referring to using Migration Assistant in target disk mode?
    If so the data that is transferred will be placed in the locations it belongs in. That is applications (for example)  will be in the Applications folder and user data will be in the user accounts.
    If that's not what you were asking post back with a clearer description.
    regards

Maybe you are looking for