DATA SECOND ORDER MORE CRITARIA

hello, i'm looking for ordering data second more criteria in numbers for ios7.
thanks,
marco

jstoph wrote:
My apologies - I haven't tried anything yet, I am very new to LabView.
I don't think there is anything specific to LabVIEW. How would you solve it in any other programming envoronment?
jstoph wrote:
I have a set of data that I wish to fit rather than solve a differential equation and am not sure how to proceed. 
In order to fit, you need two things:
data (F(x) measured) as a function of an independent variable (e.g. x). Do you have data?
A model function that can calculate F(x) (simulate the data!) based on x and a set of fitting parameters.
For some problems, there is a direct linear algebra solution available (e.g. linear or polynomial fit). For more complicated problems, an iterative procedure (e.g. Levenberg Marquardt) needs to be used, where, given an initial guess for the fitting parameters, the fitting algorithm will adjust them in way to best match the data to the model. In your case.
In your case, the differential equation needs to be solved for each iteration. Do you know the initial conditions for the differential equation or is this also to be fit??
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • I need to see Date Created Order to the second, not minute.

    I currently shoot sport on two camera bodies, Nikon D3 and D3s.  The timing of the shots is critical and I need to sort them in "Date Created Order" in Adobe Bridge. The software usually does a very good job of this, it seems to know, which order to arrange them in, but sometimes I need to rearrange the order manually.  To do this I need to be able to see, to the second, when each file was created.  In Adobe Bridge, I only seem to be able to see which minute the file was created.
    Windows 7 Adobe Creative Cloud and CS6
    Many thanks,
    Matt

    Maybe you are not looking at the correct place to see the seconds, but indeed, it would have been more easier if you could select the seconds also to show under the thumbs, would make a great Feature Request.
    I include some screenshots from my (customized) workspaces, your's might vary but the goal is the same.
    Here is a part of my usual workspace showing content, preview and metadata panel. In the metadata panel you will find what you are looking for (at least in seconds instead of minutes):
    And from the default metadata workspace (should be possible to customize much more but it isn't and therefor almost useless for my workflow):
    Problem when needing the milisecond info I don't know a way in panels other then maybe using scripting or third party exif change applications. But If you need to look for it it usually can be find in the file info intself under the Raw Data tab (this is for a Canon CR2 file, YMMV:
    Hope this helps a bit.

  • Open data extraction orders -  Applying Support Packs

    Dear All,
    I have done the IDES 4.6C SR2 installation.
    While updating the support packs, i get the message saying
    CHECK_REQUIREMENTS phase.
    Open data extraction orders
    There are still open data extraction orders in the system
    process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
    For more details about this problem, see Note 328181.
    Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
    I have checked the Note.
    But this is something m facing for the first time.
    Any suggestion!!!
    Rgds,
    NK

    The exact message is :
    Phase CHECK_REQUIREMENTS: Explanation of the Errors
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in SAP Note 328181.
    Call the Customizing Cockpit data extraction transaction and process all
    open extraction requests.

  • Sales Order Item Data & Sales Order Schedule Lines

    Hello,
    I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
    Example of how the data looks now:
    <b>Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . .  Act GI Date</b>
    1. . . . . . . . . ...TAN. . . . . ABC123. . . .10  
    1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
    2. . . . . . . . . ...TAN. . . . . CBA321. . . .15  
    2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
    How do I merge the data on the Sales Order number in the cube so it looks like below?
    <b>Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . .  Act GI Date</b>
    1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000 
    2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000  
    Many thanks,
    Matt

    Hi Matt,
        Its no possible If you are maintaining data at Order Level.
    Try to introduce one more ODS/DSO in between ODS's and CUBE by keeping Sales Order only key field. Load data from both DSO's in required fields only. Then PUSH delta to CUBE. In this why you can maintain 1 record. Try to compress cube(with delete Zero Record Rows) to delete unnessasary records.
    Hope it Helps
    Srini

  • Last date Purchase Order

    Hi All,
    I need to find Out last date purchase Order,
    I have got PO Net price in colums and  in Rows vendor and Document date.we have variable for Doc date to enter the   date intervals ( expl 01.01.2005 to 01.02.2005). this report give the vendor  with  doc dates with in this month.But we  to find out last documnet date of PO to that vendor.
    Kind regards.
    Harry
    Edited by: harry  power on Feb 7, 2008 3:48 PM

    Hi Florian,
    Thanks for your reply.
    I want to get  in the report ,last date order  to the vendor ,
    Could you more clear about condition and  How to assign to date
    Regards.
    harry

  • I'm trying to up grade the os but I keep getting the startup disk is full I ordered more memory I was told this will not help. What do I do?

    I'm trying to up grade the os but I keep getting the startup disk is full I ordered more memory I was told this will not help. What do I do?

    I think as drive capacities increase, the old 10-15% becomes less accurate.  The amount of free space you need doesn't really have anything to do with the drive size.  So, increasing your drive size shouldn't mean that you need to have more free GB (which using a % of drive space would mean).  You need free space to accommodate page outs (the amount of which would depend on how much RAM you have installed and how memory intensive the applications are), sleep images (again, this would max out at your total amount of RAM), and a bit to minimize fragmentation.
    With desktop drives commonly in the 2TB range today, it is certainly not necessary to have 200GB+ free in order to maintain proper operation.  I generally find about 30GB to be the minimum I'm comfortable with.  Mind you, I pretty much always have way more than that available.  But, if I'm working on a system and the amount of free space is at least 30GB, I would generally not site drive space as the cause of any performance issues.  I'd say that 30GB is a minimum for a stable system (with 8GB or RAM installed).  Of course at that amount, you would still need to free up space if you were to want to install or download any significant amount of data.
    With servers being more likely to run into the 16GB of RAM range, more storage would be necessary.  Most servers should be well stocked with storage, but the actual needs would vary greatly depending on what's being "served".
    The 10-15% thing came about when we used to talk about drive capacities in hundreds of MBs and RAM in terms of KB (not MB and certainly not GB).  More drive space is always a good thing, but as drive capacities continue to sky rocket, we don't need to dedicate larger amounts of storage on systems with the same specifications.  A set amount of space is required for proper operation regardless of the capacity of the drive installed.

  • Explain me briefly about evaluation order.As per my knowledge it show data type order.but I have different data type in same diemension ex:account- acc_001 is smart list data type.account-ac_002 is percentage.So fot this i will accont dim in evaluation or

    Explain me briefly about evaluation order.As per my knowledge it show data type order.but I have different data type in same dimension ex:account->acc_001 is smart list data type.account-ac_002 is percentage.So fot this i will accont dim in evaluation order.What going can any one explaining brifly ?

    2786712 wrote:
    thanks John for reply.If you dont mine can you explain clearly with example and screenshot.
    @John: You got a task
    Here you go: Hyperion Planning and More...

  • How can i order more copies of a iPhoto book using only the order number

    how can i order more copies of an  iPhoto book I made
    by  using only the order number
    as I deleted by mistake a copy of it on my iphoto

    I know the horse is out of the barn but this tutorial might be of help for future books: iP12 - Archiving an iPhoto 9 (11) Book for Editing and/or Ordering at a Later Date.
    If you're starting over from scratch with a book I suggest you create a new library just for that book. Put the photos you want in the book in an album in your current library and use the paid version of  iPhoto Library Manager to copy that album into the book library.
    This will keep the book library small for easy saving to CD or DVD or to an EHD.  If you delete photos from your full library it won't affect the book library.
    Happy Holidays

  • I often am unable to re-open Firefox in my Windows XP based latop after I have just closed a previous session. I have to wait 30 plus seconds or more. I get this message when I try to open immediately

    I eventually can open a new session

    Firefox does take a little time to close all the files that might be open while it is running (like 5 seconds), but if the process '''''hangs''''' for as long as 30 seconds or more as you said you may have an add-on or a security program that is causing Firefox to take too long to close completely.
    [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]
    You need to look in the Processes tab for '''firefox.exe'''. But if you "kill" the process you could lose data. "Session" data is probably the first type of data that could be lost. Also, closing Firefox with a lot of tabs / windows open or rapidly closing tabs or windows immediately before closing Firefox can result in an extended shut down time.

  • Read PP master data in order

    Hi...
    I have one query reference to Read PP master data in order.
    Can we read PP master data in the orders at plant level in mass processing?Or any other alternative...?
    Regards
    Tushar

    Dear There is no T Code in standard SAP to read the PP master data in mass.
    You need to develop a LSMW or BDC solution.
    Please refer below thread for more information.
    MASS read PP master data
    Cheers
    KK

  • I recently made an album from my i photos and the the drive crashed ...the album isnt in iphoto.how can i order more copies of the album?

    i recently made an album from my i photos and the the drive crashed ...the album isnt in iphoto.how can i order more copies of the album?

    Ay album do you mean an iPhoto book?  The best way is to restore a backup copy of your iPhoto library from just before the drive crashed.
    Baring that your only hope is to recreate the book in iPhoto.  For future book I suggest you try what is described in this tutorial: iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date and, if you don't already have one, start a backup strategy for backing up your important files.
    OT

  • I want to order photos on iPhoto. I have logged in one photo, and then my choices are cancel and buy now. How do I order more than one photo at a time?

    I would like to order more than one photo on iPhoto. I have downloaded one picture, and then my choices are cancel and buy now. I would like to download other photos to have them printed, too. How do I do that?

    Wich version of iPhoto do you have? You need iPhoto '09 or '11 to order prints.
    Make an album of all photos you want to order in the same order.
    Then select all photos at once, when you use Share > order prints.
    You should see a panel like this, where you can mark the quantities. The screenshot is from iPhoto 9.6:

  • How can I order more than one project to save on delivery costs?

    Is it possible to order more than one project (book) in iPhoto at the same time to save on delivery costs? I have several to order and I dont want to get hit for £5.99 three time if possible. I cant see how to do it or even if this is possible. Any guidance would be much appreciated.
    Regards,
    Andy

    You can only order identical projects on one order. If they are different then a seperate order is required
    LN

  • HT5525 How can I order more than one picture at a time in iphoto?

    How can I order more than one picture at a time in iphoto?

    It's also wise to crop the photos to the print size you're ordering so you have control over what portion of the image gets printed.  Otherwise, the image will be scaled so the smaller dimension fills the paper cropping off some of the oither dimension.
    OT

  • HT1040 why can i not seem to order more than one print at a time, which obviously becomes expensive with the shipping, it does not seem to offer me the facility to choose again?

    why can i not seem to order more than one print at a time, which of course becomes expensive with shipping, it does not seem to offer me the facility to choose again? either order or cancel!

    make an album containing the photos you wnat to print, select all photos in the album  and order
    LN

Maybe you are looking for