Data secure in carrier 10.2 update???

When updating 10.2 using the update capabilitly directly from the Q10, is the personal data/contacts/email accts/etc. lost? Or is everything retained on the Q10 as it has been with other updates?
Thanks!
. . . . . Pete

All data is retained, if all goes well. You only need to restore from the backup if things go wrong.
Blackberry Engineering in Switzerland - Dexion Services AG

Similar Messages

I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.

I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.

Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694

Using Data Security under Functional Developer / User Manager

Has anyone succesfully carried out any Data Security policies in Oracle Apps. I would like to get details on this.
Thanks in advance.

Actually the other scripts on the http://www.petefinnigan.com/tools.htm site seem to do the trick where you can check for who has DBA and who has SELECT ANY TABLE.
The next questions is .... what other privs should I be concerned with? Just want to make sure I am checking for all possibilities of access to a particular object.

When trying to update my apps on my phone, after logging in it says my account has been disabled for security reasons. I've updated my password but it still says its disabled. Any thoughts?!

When trying to update my apps on my phone, after logging in it says my account has been disabled for security reasons. I've updated my password but it still says its disabled. Any thoughts?!

Hi,
If you have followed everything in the link below, and still have the problem, click on one of the links at the very bottom under "Additional Information". That's all we can do for you here:
http://support.apple.com/kb/TS2446
Cheers,
GB

Problems Receiving Emails and some data on WIFI since latest software update.

Problems Receiving Emails and some data on WIFI since latest software update.
My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem.
When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data.
Can someone please inform Blackberry and get a quick fix on this

Sounds like you have Do NOt Disturb turned on.
settings - do not disturb - off

Data security for multiple data sources

Dear BO guru's,
I am struggling with a brainbraker on authorizations on Universes since quite some time.
I am not a BO guru so hopefully someone can help me with this.
I (more or less) know the concept of data security in BO: users can be restricted on data level in (mainly) two ways:
1) with roles in CMC and with restrictions in Universe Designer.
OR
2) with a DB table that contains all authorized values per user and per field (i.e. John can see data for country UK)
The first is easy to set up, but hard to maintain.
The second is difficult to set up, but very flexible.
Now here is the problem...
Supporse your BO server is connected to different source systems (i.e. an SQL server, an Oracle server...) and you want only one universe to get data from all systems at the same time and display it in one report.
If I am not mistaken, this means we need a data federator.
...My questions:
1) Is there a possibility to do this without a data federator (but still have one universe to build my report or dashboard on)?
2) Where do I keep the table with authorizations for the users? Is that a database of the BO Enterprise server, a seperate data base, or in a table of one of the source systems (SQL, Oracle...)?
As this questions keeps me busy since long time, I would be very grateful to have your help.
It seems hard to find information on this.
Thanks a lot in advance!
UniverseDummy

1) Is there a possibility to do this without a data federator (but still have one universe to build my report or dashboard on)?
Apart from the Data Federator, you can either use an ETL tool to load your data into a single Datawarehouse or wait until XI 4.0
2) Where do I keep the table with authorizations for the users? Is that a database of the BO Enterprise server, a seperate data base, or in a table of one of the source systems (SQL, Oracle...)?
If you are going to use the Data Federator then you can create the table in one of your source systems and add it as a data source in your DF project.
Regards,
Stratos

Just bought a new iphone 5 i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac aga data 0

Just bought a new iphone 5, i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac again?)

You an use your iPhone without connecting it to a computer.
But the product description for the iPhone clearly states that in order to sync with a Mac you must have OSX 10.6.8 or later. That version of the OSX is usually called Snow Leopard. There are two mo recent versions of OSX. OSX 10.7.x (Lion) and OSX 10.8.x (Mountain Lion).
If you can upgrade your computer to at least Snow Leopard I suggest you do so.

I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

What OS on your Mac?
What iOS on your phone??

My MacKeeper says iPhoto is out of date. When I try to update the App Store says I need IOS 10.9 or later. I have 10.7.5 and when I check for updates my Mac says the software is up to date. How do I solve this problem??

My MacKeeper says iPhoto is out of date. When I try to update it, the App Store says I need IOS 10.9 or later. I have 10.7.5 and when I check for updates my Mac says the OS software is up to date. How do I solve this problem??

1. First step to solving the Problem: Trash MacKeeper. It's a pile of trash that does far more harm to your computer than good.
https://discussions.apple.com/docs/DOC-3691
2. What version of iPhoto do you have? (iPhoto Menu -> About iPhoto)

OBIEE-EBS data security integration

Hi all,
I am trying to implement the HR-Org based data security in EBS-OBIEE integration.
After creating the initialization blocks EBS Single Sign-on Integration,Get Oracle EBS Security Context,Group-EBS Responsibility I have created a new initialization block HR Organizations to populate the session variable "HR_ORG" and I am using the following the query.
Even though the session variables GROUP and USER are getting their values correctly and integration works fine, the variable HR_ORG says "has no value definition".
[nQSError: 10058] A general error has occurred. [nQSError: 23006] The session variable, NQ_SESSION.HR_ORG, has no value definition. (HY000)
SQL Issued: SELECT "Per Business Groups"."Business Group Id", VALUEOF(NQ_SESSION.HR_ORG) FROM HR
Please help me for implementing the data security after the EBS-OBIEE integration..
For populating HR_ORG variable by row wise initialization:
SELECT DISTINCT 'HR_ORG',TO_CHAR(SEC_DET.ORGANIZATION_ID)
FROM
SELECT
'HR_ORG', ASG.ORGANIZATION_ID
FROM
FND_USER_RESP_GROUPS URP
,FND_USER USR
,PER_SECURITY_PROFILES PSEC
,PER_PERSON_LIST PER
,PER_ALL_ASSIGNMENTS_F ASG
WHERE
URP.START_DATE < TRUNC(SYSDATE)
AND (CASE WHEN URP.END_DATE IS NULL THEN TRUNC(SYSDATE) ELSE TO_DATE(URP.END_DATE) END) >= TRUNC(SYSDATE)
AND USR.USER_NAME = ':USER'
AND USR.USER_ID = URP.USER_ID
AND TRUNC(SYSDATE)
BETWEEN URP.START_DATE AND NVL(URP.END_DATE, HR_GENERAL.END_OF_TIME)
AND PSEC.SECURITY_PROFILE_ID = FND_PROFILE.VALUE_SPECIFIC('PER_SECURITY_PROFILE_ID', URP.USER_ID, URP.RESPONSIBILITY_ID, URP.RESPONSIBILITY_APPLICATION_ID)
AND PER.SECURITY_PROFILE_ID = PSEC.SECURITY_PROFILE_ID
AND PER.PERSON_ID = ASG.PERSON_ID
AND TRUNC(SYSDATE) BETWEEN ASG.EFFECTIVE_START_DATE AND ASG.EFFECTIVE_END_DATE
AND URP.RESPONSIBILITY_ID = DECODE(FND_GLOBAL.RESP_ID,
-1, URP.RESPONSIBILITY_ID,
NULL, URP.RESPONSIBILITY_ID,
FND_GLOBAL.RESP_ID)
UNION
SELECT DISTINCT 'HR_ORG',
ORGANIZATION_ID
FROM PER_ALL_ASSIGNMENTS_F ASG,
FND_USER USR
WHERE ASG.PERSON_ID = USR.EMPLOYEE_ID
AND USR.USER_NAME = ':USER'
AND TRUNC(SYSDATE) BETWEEN ASG.EFFECTIVE_START_DATE AND ASG.EFFECTIVE_END_DATE
AND ASG.PRIMARY_FLAG = 'Y'
) SEC_DET
Thx!

Duplicate post see Re: obiee-ebs data security integration

Inserting data in Item Cost -Layer Cost Update

Hello experts,
Is there an interface table for inserting data in Item Cost - Layer Cost Updates?
Or can I insert on it directly? Can you provide an example Insert query for this?
Thank you.
Pam

Hi
My understanding is that only Item Types are being picked up by the Actual Cost Process and the others wouldnt be. You should raise an SR to Oracle to confirm the same (as I havent done this for a long time and hence cant be 100% sure). However, if you have already done these then you can run a query to get all this data and use Cost Adjustment as a workaround to load all these values to the items
Hope this helps
Regards
Girish

Data security (Data from SAP BW) for AD users

Hi All,
I have a scenario.
BO env : Business Objects 3.1 Sp3
Sap Integration kit Sp3
My target is to implement AD SSO & also provide data security for data from SAP BW. Currently there are no roles & authorization defined in the sap System. My plan was
Step 1:- Implement AD SSO in Business Objects
Step 2: Map the AD users in SAP system
Step 3:- Crate roles in SAP System
Step 4:- Assign the users roles
Steps 5:- (Not sure) :- Map the users (Now in SAP) to BO & then aliases them with the users from AD.
Pleas let me know if this would be correct approach... if not please suggest.... I am kind of new to SAP BO integration with experience in BO admin

Step 1: Setup Windows AD SSO on your BOBJ server
Step 2: Import Windows AD groups in BO
Step 2- Setup Server-side SNC between BO and your SAP system
Step 3:- Create roles in SAP System and import them in BO
Step 4:- Assign SAP users the created roles
Step 5: - In the CMC create SAP aliases for your Windows AD accounts
Step 6: - Setup your reports and/or universe connections to use SSO.
For more information on server side SNC check the installation guide of the integration Kit.
Regards,
Stratos

HT3529 When using imessage on iphone5 does it ever use up any data from your carrier whether using wifi or carrier

When using message on the iphone 5 does it ever use up data from your carrier, whether you are using wifi or carrier

When using iMessage, they use data. If you are connected to wifi, it will use your wifi data, which will have no affect on your cellular account. If you are not connected to wifi, you will use cellular data, which is charged against your carrier account.

Data persistence when ios app is updated

I'm saving files in AMF format in the application storage directory (app-storage:/). This works great, but the fles get deleted when the application is updated.
I'm dsitributing the app internally in the company via our intranet (ad-hoc). The users do not delete the app, they simply redownload the new version.
Where do I have to save the files in the iOS device so that they are not deleted when the application is updated?
Thanks

I know with shared objects if you install an app, save some data then install a newer version via flash all data is erased if you however update the app through the app store the data is saved, for your situation this is not possible since its an internal app. You can save the data externally to a server this way every time the app launches it could check for the correct data but of course this is much more troublesome and time consuming.

I have just updated to the latest io5 and have lost apps and their data, can i reverse the new update to get back what i had on there?

i have just updated to the latest ios 5 and have lost apps and their data, can i reverse the new update to get back what i had on my ipad?

There is no need to do that, I had the same problem pal! Just do this and all should be fine!
Delete one of the app's and re-install it, then for some reason everythign is restored to as it was!
Hope you get on fine, let me know!
Thanks
Dan

Data secure in carrier 10.2 update???

Similar Messages

Maybe you are looking for