Data security in Dashboard

hi all
I need to implement the data security in Dashboard
The scenario as follows
I am having 4 columns in my dashboard as employee name , project number , project manager name , Cost
once a project manager called anil loged he wants to see who are all employees working in his projects and details , along with this he is in a position to see the projects belongs to him but not the other projects
can any one help me regarding this
Thanks in advance
soori

hi vineeth
Thanks for u r Reply
But my scenario not like this ,
I need to implement the data security in Dashboard
The scenario as follows
I am having 4 columns in my dashboard as employee name , project number , project manager name , Cost
once a project manager called anil loged he wants to see who are all employees working in his projects and details , along with this he is in a position to see the projects belongs to him but not the other projects
can any one help me regarding this
Thanks in advance
soori

Similar Messages

Using SQL Server credentials with Secure Store Target Application for Data Connection in Dashboard Designer

[Using SharePoint 2013 Enterprise SP1]
I would like to use SQL Server credentials in a Secure Store Target Application, and
this page makes it look like it's possible but when I attempt to use the new Target Application ID as authentication for a Data Connection in Dashboard Designer, I get a generic "Unable to access data source" with no error logged in SQL Server
logs.
I am able to use a Target Application with AD credentials to access the SQL db without a problem. Suggestions?

Hi,
1. Make sure that the credential is set to
Secure Store Target Application. Navigate to the Central Administration. Click on the
Application Management. Click on the Manage Service Applications. Click on the
Secure Store Service Application. Select the application ID and from the ECB menu click on the
Set Credentials. Enter the Credential Owner, Windows User Name and the
Windows Password.
2. Make sure that in the Dashboard Designer “Use a stored account” is selected in the “Authentication” and the proper application ID is mentioned.
Please refer to the link below for more information:
http://www.c-sharpcorner.com/Blogs/14527/unable-to-access-data-source-the-secure-store-target-applic.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Data level security for Dashboard pages.

Hi all,
I have a question.I want to apply data level security to the data in Dashboard pages .
Any Answers.
Thanks Sunny.

Thanks Srikanth and Aravind .
I have studied abt the data level security for dashboard.
My question is : Is there any way to apply dataleve security to dashboard pages . like id dashboard D1 has pages p1,p2,p3
and if we want to implement datalevel security to page is that possible.
Thanks
Sunny.

Data security for multiple data sources

Dear BO guru's,
I am struggling with a brainbraker on authorizations on Universes since quite some time.
I am not a BO guru so hopefully someone can help me with this.
I (more or less) know the concept of data security in BO: users can be restricted on data level in (mainly) two ways:
1) with roles in CMC and with restrictions in Universe Designer.
OR
2) with a DB table that contains all authorized values per user and per field (i.e. John can see data for country UK)
The first is easy to set up, but hard to maintain.
The second is difficult to set up, but very flexible.
Now here is the problem...
Supporse your BO server is connected to different source systems (i.e. an SQL server, an Oracle server...) and you want only one universe to get data from all systems at the same time and display it in one report.
If I am not mistaken, this means we need a data federator.
...My questions:
1) Is there a possibility to do this without a data federator (but still have one universe to build my report or dashboard on)?
2) Where do I keep the table with authorizations for the users? Is that a database of the BO Enterprise server, a seperate data base, or in a table of one of the source systems (SQL, Oracle...)?
As this questions keeps me busy since long time, I would be very grateful to have your help.
It seems hard to find information on this.
Thanks a lot in advance!
UniverseDummy

1) Is there a possibility to do this without a data federator (but still have one universe to build my report or dashboard on)?
Apart from the Data Federator, you can either use an ETL tool to load your data into a single Datawarehouse or wait until XI 4.0
2) Where do I keep the table with authorizations for the users? Is that a database of the BO Enterprise server, a seperate data base, or in a table of one of the source systems (SQL, Oracle...)?
If you are going to use the Data Federator then you can create the table in one of your source systems and add it as a data source in your DF project.
Regards,
Stratos

Row level security in dashboard

Hello Experts,
We have a scenario where in my dev team is designing dashboard based on SAP BW (bex query) via OLAP universe -> Webi reports -> Xcelsius. We need to implement data security(row level) in the dashboard i.e : The user when he sees the dashboard, should see data w.r.t only to his context.
What are the different possible ways to handle such a situation?
Can we use Xcelsius publishing plug in?
Cheers,
AK

Hi Ingo,
Thanks for your reply.
So Xcelusis publishing plug in will not solve my problem right? & I need to have BI authorizations defined in SAP system?
I am having tough time convincing my customer about this.
Thanks
Cheers,
AK

I've imported PowerBI designer file. so why do I keep getting 'It looks like you haven't added any data to this dashboard'

This might be related to my post about not being able to enter a column name in the where clause, and Q&A always using COUNTRY_OF_ORIGIN.
Anyway, I took my original designer file, removed the first page of the report I dd, then added a new page, but this time with a visualisation of sales amount by product name. Saved the whole lot to a new pbix file, and uploaded it into the PowerBI
cloud. Pinned the visualsation to a dashboard, and started to enter a query.
Up pops the message 'It looks like you haven't added any data to this dashboard' etc, etc.
But, but, but I have uploaded the data. It's all in my pbix file. It seems that PowerBI usese the first column of my first dataset as the master for column names in the where clause. And if you do not have a visualisation that uses that column (i.e. COUNTRY_OF_ORIGIN
in my case) then Q&A doesn't think it has a dataset.
I am going to try some other tests to see if I can persuade PowerBI and Q&A to do its business properly.
Angus

The reset will not erase the virus but the reset can be done up to you.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

No Data listed on dashboard from QAAWS

I create in QAAWS in BO XI3.1 a Web service where i use for fiscal year two prompt "from year " - "to year": By testing the web service, entering the prompt values of fiscal year and publishing the web service, data are normally listed.
In the dashboard, i have
- on the left side of data manager for entering values: login, password, enter_value_fiscal_period1, enter_value_fiscal_period2
- on the right side of data manager for listing values: fiscal year, month, state, city, lines, quantity_sold, sales_revenue, MESSAGE, CREATORNAME,....
-> I match enter_value_fiscal_period1, enter_value_fiscal_period2 with two excel cells, and also fiscal year, month, state, city, lines, quantity_sold, sales_revenue with once 10 excel cells,
-> And connect those fields state and sales_revenue in a chart diagramm,
-> But when i start the preview button, no data is listed in the chart diagram, although in the QAAWS in BO XI3.1, data are listed when the web service is published.
Many thnak for helping
Arnaud

Hello Karthik,
I can i debug here. Is there a step by step from QAAWS adding to PREVIEW execution.
Is it a must to use prompt in the web service?
New informations: I customize the xcelsius server service in CMC, but still be not able to get data in the dashboard, although, in the data manager i can every time see the meta data from (table titles, login and password) the QAAWS.
My second question is to know, if i have to do sthing for the password, where i change the security role for "ALL" in qaaws.
I would appreciate your help.
Kind regards.
Arnaud
Edited by: Arnaud on Jul 27, 2011 12:16 PM
Edited by: Arnaud on Jul 27, 2011 12:43 PM

OBIEE-EBS data security integration

Hi all,
I am trying to implement the HR-Org based data security in EBS-OBIEE integration.
After creating the initialization blocks EBS Single Sign-on Integration,Get Oracle EBS Security Context,Group-EBS Responsibility I have created a new initialization block HR Organizations to populate the session variable "HR_ORG" and I am using the following the query.
Even though the session variables GROUP and USER are getting their values correctly and integration works fine, the variable HR_ORG says "has no value definition".
[nQSError: 10058] A general error has occurred. [nQSError: 23006] The session variable, NQ_SESSION.HR_ORG, has no value definition. (HY000)
SQL Issued: SELECT "Per Business Groups"."Business Group Id", VALUEOF(NQ_SESSION.HR_ORG) FROM HR
Please help me for implementing the data security after the EBS-OBIEE integration..
For populating HR_ORG variable by row wise initialization:
SELECT DISTINCT 'HR_ORG',TO_CHAR(SEC_DET.ORGANIZATION_ID)
FROM
SELECT
'HR_ORG', ASG.ORGANIZATION_ID
FROM
FND_USER_RESP_GROUPS URP
,FND_USER USR
,PER_SECURITY_PROFILES PSEC
,PER_PERSON_LIST PER
,PER_ALL_ASSIGNMENTS_F ASG
WHERE
URP.START_DATE < TRUNC(SYSDATE)
AND (CASE WHEN URP.END_DATE IS NULL THEN TRUNC(SYSDATE) ELSE TO_DATE(URP.END_DATE) END) >= TRUNC(SYSDATE)
AND USR.USER_NAME = ':USER'
AND USR.USER_ID = URP.USER_ID
AND TRUNC(SYSDATE)
BETWEEN URP.START_DATE AND NVL(URP.END_DATE, HR_GENERAL.END_OF_TIME)
AND PSEC.SECURITY_PROFILE_ID = FND_PROFILE.VALUE_SPECIFIC('PER_SECURITY_PROFILE_ID', URP.USER_ID, URP.RESPONSIBILITY_ID, URP.RESPONSIBILITY_APPLICATION_ID)
AND PER.SECURITY_PROFILE_ID = PSEC.SECURITY_PROFILE_ID
AND PER.PERSON_ID = ASG.PERSON_ID
AND TRUNC(SYSDATE) BETWEEN ASG.EFFECTIVE_START_DATE AND ASG.EFFECTIVE_END_DATE
AND URP.RESPONSIBILITY_ID = DECODE(FND_GLOBAL.RESP_ID,
-1, URP.RESPONSIBILITY_ID,
NULL, URP.RESPONSIBILITY_ID,
FND_GLOBAL.RESP_ID)
UNION
SELECT DISTINCT 'HR_ORG',
ORGANIZATION_ID
FROM PER_ALL_ASSIGNMENTS_F ASG,
FND_USER USR
WHERE ASG.PERSON_ID = USR.EMPLOYEE_ID
AND USR.USER_NAME = ':USER'
AND TRUNC(SYSDATE) BETWEEN ASG.EFFECTIVE_START_DATE AND ASG.EFFECTIVE_END_DATE
AND ASG.PRIMARY_FLAG = 'Y'
) SEC_DET
Thx!

Duplicate post see Re: obiee-ebs data security integration

How to convert date in the dashboard prompt

can anybody tell me how can i conver the date into month year format in the dashboard prompt
originally i am getting data as a date in the dashboard prompt.i want to change that to MON YYYY format.
can anybody tell me how can i change the original date format into MMM YYYY format

hi,
Try with evaluate function in prompt Fx use the following syntax
Re: Date function
Else, EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 30 ), Date."Calendar Date", 'MON-YYYY')
What you are expecting to be in Prompt was it Mon-2009 right"?
Thanks,
Saichand.v

Data security (Data from SAP BW) for AD users

Hi All,
I have a scenario.
BO env : Business Objects 3.1 Sp3
Sap Integration kit Sp3
My target is to implement AD SSO & also provide data security for data from SAP BW. Currently there are no roles & authorization defined in the sap System. My plan was
Step 1:- Implement AD SSO in Business Objects
Step 2: Map the AD users in SAP system
Step 3:- Crate roles in SAP System
Step 4:- Assign the users roles
Steps 5:- (Not sure) :- Map the users (Now in SAP) to BO & then aliases them with the users from AD.
Pleas let me know if this would be correct approach... if not please suggest.... I am kind of new to SAP BO integration with experience in BO admin

Step 1: Setup Windows AD SSO on your BOBJ server
Step 2: Import Windows AD groups in BO
Step 2- Setup Server-side SNC between BO and your SAP system
Step 3:- Create roles in SAP System and import them in BO
Step 4:- Assign SAP users the created roles
Step 5: - In the CMC create SAP aliases for your Windows AD accounts
Step 6: - Setup your reports and/or universe connections to use SSO.
For more information on server side SNC check the installation guide of the integration Kit.
Regards,
Stratos

Changing Date Format in Dashboard prompt drop down list

Hi friends, my dashboard shows a drop down list for dates , which are in format "7/1/2008 12:00:00 AM".
This is defined datetime datatype in sql server. Is there any way to change the date format in dashboard prompt to just "7/1/2008" without doing it in database side.
Appreciate your help.
Thanks and regards

Hi... Toony
In Dashboard Prompt, you have option to select i.e. show SQL,
there you write the Logical SQL or Advanced SQL: <em>select cast("timestampCOLUMN" as date) from "PresentationLayerName"</em>
this is simple way without changing anything in rpd side...
And if you want the timestamp column somewhere in some reports you can use that column directly.
If you don't want you need to cast it as DATE.
If your question was answered then put it as answered and mark it as correct... ;)
Edited by: Kishore Guggilla on Oct 20, 2008 11:44 PM

Problem About Date Format in Dashboard

Hi All:
I still have problem about date format in dashboard and dashboard prompt. When I use cast(dealdate as date) in dashboard prompt(coloumn formula of deal_date) and filter view(In edit view of filter coloumn formula) Then It converts the date format from mm/dd/yyyy to yyyy-mm-dd But I want format in dd-mm-yyyy.
ANd also one problem more that is when I use cast function in filter coloumn formula then how I give alias to it. Because it shows same like that cast(deal_date as date) on dashboard filter view.
Pluzz help me to solve this problem
Haroon

Changing the ini files should change the date format. Have you amended the correct instances of the date format? In dbFeatures there is one for every ODBC connection.
For example in my DBFeatures.INI
[ DATA_SOURCE_FEATURE = ODBC_300 ]
DATE_FORMAT = 'dd-mm-yyyy' ;
     TIME_FORMAT = 'hh:mi:ss' ;
     DATE_TIME_FORMAT = 'dd-mm-yyyy hh:mi:ss' ;
     IDENTIFIER_QUOTE_CHAR = '"';Also a file on the presentation side in OracleBI \web\Config called localedefinitions.xml.
Inside that there appears to be defaults for localisations - maybe it is possible to amend your locale in the Administration settings of the dashboard.
However, I haven't tried this sorry.

Using Data Security under Functional Developer / User Manager

Has anyone succesfully carried out any Data Security policies in Oracle Apps. I would like to get details on this.
Thanks in advance.

Actually the other scripts on the http://www.petefinnigan.com/tools.htm site seem to do the trick where you can check for who has DBA and who has SELECT ANY TABLE.
The next questions is .... what other privs should I be concerned with? Just want to make sure I am checking for all possibilities of access to a particular object.

Database Data Security: both from within (using MIMEbase64 encoding) and from without (using encryption).

In my MDB file databases (Jet 4.x format) I turn on both compression and encryption. This gives me data security from without, meaning, I can't open a MDB file in a Word Processing software (or otherwise) and read the data in a humanly recognized
format.   But I am also using MIMEbase64 encoding of my stored data so that the data is humanly unreadable from within - meaning that anyone performing an SQL query will not be able to humanly read the data in my database. I do the decoding
(from MIMEbase64) within my end-user software interfaces to the databases.
I found out just recently (last few months) that I can do this from Win32 Perl, so I encorporated this feature into my Perl database applications.   Only thing is that MIMEbase64 increases the size of the data stored.
Is there a better encoding strategy available today which might actually compress the data a little?

INSTRUCTIONS FOR SECURE/CUSTOM (non-formula based) TEXTFILE ENCODING (should be undecipherable w/o mappings file):
by Eric C. Hansen. You may freely use these encoding instructions, and the code I have provided, but please
acknowledge me as the author where credit is due - such as in a publication. And do not try to sell it.
However, any code I have provided you may freely use in any programs you write to be sold for your own profit,
except you may not attempt to sell this encoding scheme (or my code provided), as a generic encoding tool, for
general use, to be marketed as a turn-key custom encoding solution.
(1) Create a unique code list
Using the characters: A-Z a-z 0-9 only. That's 62 characters only.
62 (1 char codes) + 3844 (2 char codes) + 238,328 (3 char codes) = 242,234 total codes
62x1 + 62x62 + 62x62x62
REMINDS ME of my college Genetics course i.e. dominant/recessive trait inheritance tables
EXAMPLE CODES: a, k, 3c, A4, xy1, H8j
(2) Create a unique word(+punc) list from your textfile which is to be encoded. You know how to do this.
Example of 9 words(+punc) found between whitespace within a textfile input line:
"Hello", this is Mr. Bell-va-deer. My number is 999-342-8998.
1 2 3 4 5 6 7 8 9
PERL code for STEPS 3-7 is provided below. Code for STEP 1 above was previously provided.
You should have little trouble writing the textfile encode/decode logic yourself.
(3) Read your list of unique codes into an array.
(4) Read your list of unique words(+punc) into another array.
LOOP #-- 0 to number of elements in words array
(5) select a random code and a random word(+punc) from the 2 arrays.
(6) now remove that code and that word(+punc) from each array using "splice".
(7) then save them as key/val pairs to persistent Perl SDBM database files ("mappings").
END LOOP
(8) Once you have your persistent, random code/word mappings, you can convert your textfile
to an encoded textfile. Read in one line at a time from your textfile (chomp), parse the words(+punc.)
between whitespace within that line, then for each word(+punc) parsed, perform
the word-to-code mapping conversions by doing a lookup within the Perl SDBM database
file of key/val pairs, where KEY=word and VAL=code. You will then need to
concatenate these codes (space delimited) to your outputline, in the same order as found in your
inputline, finally writing the outputline (newline "\n" terminated) to your new encoded textfile.
(9) Keep your persistent Perl SDBM database file ("mappings") in SAFE KEEPING, with a naming
convention of your choice that perhaps hides any relationship to the name of
your encoded text document - which it specifically pertains to. But keep a record of that joint
relationship somewhere. Keep a copy of both the original textfile and the encoded textfile,
or perhaps you'd like to keep just the encoded textfile?, and not the original? You can always decode it.
(10) Send your encoded text document via email as an attachment, to the recipient of your choice.
(11) Upload your persistent Perl SDBM database "mappings" file to your secure login FTP download site.
NOTE: If your encoded text document is very large, you may want to reverse 10 & 11, putting the encoded file
on the FTP site, and sending the Perl SDBM database file ("mappings") as the email attachment.
(12) Call your recipient to see if they have received the encoded textfile, email attachment.
Let them know that the "mappings" file is uploaded for them to download from the FTP site.
You can have a LINGO you both use/know on the phone, to secretly convey this message, if you like,
to avoid possible interception of this sensitive information.
Recipient will then take the encoded textfile email attachment, the FTP downloaded "mappings" file,
and place them both in a directory on their PC where the Perl decoding program is located which you
had previously sent them to handle all the decoding anytime you send them an encoded textfile + "mappings".
Recipient will run the Perl decoding utility program to create the original textfile.
use Win32; #-- as you can see, I use a Windows O/S Perl distribution.
use IO::Handle;
use SDBM_File; #-- my understanding is this module comes standard with every Perl distribution
use Fcntl;
$PWD=Win32::GetCwd(); #-- get current working directory on Windows O/S platform.
srand; #-- random seeding initiated, do this just once at top.
@codesARR=(); @wordsARR=(); #-- initialize the arrays
print "working. please wait...\n\n";
unlink( "$PWD\\Project_0836_Mappings_CtoW.pag" )
if (-e "$PWD\\Project_0836_Mappings_CtoW.pag" );
unlink( "$PWD\\Project_0836_Mappings_CtoW.dir" )
if (-e "$PWD\\Project_0836_Mappings_CtoW.dir" );
unlink( "$PWD\\Project_0836_Mappings_WtoC.pag" )
if (-e "$PWD\\Project_0836_Mappings_WtoC.pag" );
unlink( "$PWD\\Project_0836_Mappings_WtoC.dir" )
if (-e "$PWD\\Project_0836_Mappings_WtoC.dir" );
unlink( "$PWD\\Project_0836_Mappings.txt" )
if (-e "$PWD\\Project_0836_Mappings.txt" );
$cnt1=0; $ret="Y";
open(CODES,"$PWD\\codes.txt") || do {$ret="N";};
if ($ret eq "N") {
print "Codes input file not opened \n";
sleep 5; die;
while (<CODES>) {
chomp $_;
$codesARR[$cnt1]=$_;
$cnt1++;
print $cnt1 . " codes loaded\n\n";
close(CODES);
$cnt2=0; $ret="Y";
open(WORDS,"$PWD\\words.txt") || do {$ret="N";};
if ($ret eq "N") {
print "Words input file not opened \n";
sleep 5; die;
while (<WORDS>) {
chomp $_;
$wordsARR[$cnt2]=$_;
$cnt2++;
print $cnt2 . " words loaded\n\n";
close(WORDS);
sleep 3; #-- a little time to check on record counts loaded to both arrays
tie( %Project_0836_Mappings_WtoC, "SDBM_File", '.\Project_0836_Mappings_WtoC', O_RDWR|O_CREAT, 0666 );
if (tied %Project_0836_Mappings_WtoC) {
print "WtoC Hash/SDBM File are now tied\n\n";
} else {
print "Could not tie WtoC Hash/SDBM File\n\n"; sleep 5; die;
tie( %Project_0836_Mappings_CtoW, "SDBM_File", '.\Project_0836_Mappings_CtoW', O_RDWR|O_CREAT, 0666 );
if (tied %Project_0836_Mappings_CtoW) {
print "CtoW Hash/SDBM File are now tied\n\n";
} else {
untie(%Project_0836_Mappings_WtoC); #-- close the successful tie made directly above
print "Could not tie CtoW Hash/SDBM File\n\n"; sleep 5; die;
open (OUT,"> $PWD\\Project_0836_Mappings.txt");
OUT->autoflush(1);
$cnt2=$#wordsARR; #-- we do this because we will be removing elements from wordsARR
for ($i=0; $i<=$cnt2; $i++) {
$index = rand @codesARR; # get a random index from the codes array
$code = $codesARR[$index]; # get the value of that array element
splice(@codesARR,$index,1); # removes only this element from the codes array.
$index = rand @wordsARR; # get a random index from the words array
$word = $wordsARR[$index]; # get the value of that array element
splice(@wordsARR,$index,1); # removes only this element from the words array.
$Project_0836_Mappings_WtoC{$word}=$code; # key/value pair where: word is key, code is value
$Project_0836_Mappings_CtoW{$code}=$word; # key/value pair where: code is key, word is value
print "Your Mappings have been created and saved to (.dir and .pag extension files)\n\n";
print OUT "Here are your Mappings you just created:\n\n";
foreach $key (keys %Project_0836_Mappings_WtoC) {
print OUT "word=" . $key . " code=" . $Project_0836_Mappings_WtoC{$key} . "\n";
print OUT "##################################################\n";
foreach $key (keys %Project_0836_Mappings_CtoW) {
print OUT "code=" . $key . " word=" . $Project_0836_Mappings_CtoW{$key} . "\n";
untie(%Project_0836_Mappings_WtoC); #-- now you have saved a persistent word/code mappings file
untie(%Project_0836_Mappings_CtoW); #-- now you have saved a persistent code/word mappings file
close(OUT);
print "Done. Goodbye!\n";
sleep 5;
exit;

Payment Card Industry Data Security Standards Requirement

We store credit card numbers in our CRM and ERP systems for billing
purposes. We use Delego software for credit card security. We also mask
the credit card numbers during display.
According to our interpretation of section 3 of the Payment Card
Industry (PCI) Data Security Standards, we understand that we can
retain cardholder data only as long as needed for business, legal,
and/or regulatory purposes. According to our compliance policy that
period is 3 years.
Hence we wish to replace all card numbers older than 3 years with dummy
card numbers. Since this requirement is mandated by the PCI-DSS, we
believe SAP should be supplying us means to accomplish this. Are there any programs delivered by SAP to modify card numbers? Has anybody come across such a requirement?

Hi Gina,
Did you find good information about PCI-DSS compliance topics with SAP from this forum? In particular we are looking at options to comply with requirement 11, File Integrity Monitoring.
We would appreciate any guidance.
Thank you, TMM

Data security in Dashboard

Similar Messages

Maybe you are looking for