Data selection for Characteristic Selection in BW query

Hi,
We have BW query where Run Day is Characteristic field
once we execute the query Data in Runday selection is coming from Dimension table.
But we want this runday selection values to populate from Runday of fact table.as Runday in fact date has less number of values.Any help is highly appreciable.
Thanks
Sudhakar.

Hi Raghavendra.
Thanks for your reply.
You solved my problem 99%
I tried RSRV option, I gave Infocube and Dimension it is just giving Number of entries which are not there in Infocube but it is not deleting the unused data.
Please let me know what should I do to delete unused data in Infoobject..
Also you gave another option in infoobject definition under Business explorer to select "only Values in Infoprovider"
for Query def and Query Execution Filter value Selection.
We can use any one,right? (Either Deletion from infoobject or check the option in Bus Ex)
Thanks
Sudhakar.

Similar Messages

No data Exists for this selection in PSA.

Hi Guys,
I received an Error message with loading of 2lis_03_bf datasource..
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
PSA Table
DETAILS Tab: Processing (data packet): Errors occurred
                   : Data Package 6 ( ? Records ) : Errors occurred
                   : Update PSA ( 0 Records posted ) : Errors occurred
                   : No data exists for this selection in PSA
For DataPacket 6 (Records sent :21572 - Records Received : 0)
All other datapackets are updated fine with almost 10,00,000 records..Any help on this ,guys..
Manythanks
Arun

Hi,
While the load was in progress some one might have deleted the data in PSA or there might be a PSA deletion job running or there might be a PSA deletion chiain which includes this table. Check all these to find out how it got deleted.
In order to load the data again you can do a reload and probably it works fine this time.
Anup.

Web Item Selection for Characteristic Structures

Hello experts,
I have created a web template with a query that has some characteristic structures. When planning functions are executed, I want to restrict the affect against the structures using web item selection (data binding). Is it possible to set data binding for strucures?
Thank you.

Hello Gernot!
Did you find a solution for using row selection in combination with a structure in the query?
I face a similar situation and one solution I found so far is to use an dropdown-box to make the selection although I would prefer using the row selection-feature as it is more convenient and obvious to the user.
manuel

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

00933 error when clicking on the data tab for the selected table

Hi,
I'm getting the following error when selecting a table from the tree view then clicking on the data tab:
An error was encountered performing the requested operation:
ORA-00933: SQL command not properly ended
00933.00000 - "SQL command not properly ended"
*Cause:
*Action:
Vendor code 933
The exact same tables created from sqlplus for a different user in the same database work fine. Note, I'm not typing any SQL in myself. It would appear this happens on all tables created as this user. I cannot see any difference between permissions for this user and others which work but the failing user does have a "-" in the username and password which I'm suspicious of.
This is SQL Developer v 1.2.0 (build 29.98) (the most recent I believe, Oracle Database 10g Express Edition Release 10.2.0.1.0 and Linux ubuntu.
Thanks
Martin

"-" is not allowed in identifiers and is almost certainly the cause of your problem. This can be got round by quoting i.e. using "STUPID-NAME" instead of STUPID-NAME.
I'm slightly surprised that SQLDeveloper doesn't quote the statement. Perhaps it quotes table names but not user names.

How to set the Fascinate SD card as being the data source for ringtone selection.

I want to select my ringtones from my Fasinate's SD memory card so that I can transfer already purchased Verizon ringtones to my new phone from my deactivated ones. How do I do that? My deactivated phone (BlackBerry Curve) had the ability to assign where data was stored and where each application got their data from when running. Thank you for any help.

Content libraries are unique to each supported device with the VZW Tones Deluxe application supporting the complete library.
Content eligible for My Media Retrieval:
Get It Now/ Media Store Games and Applications
VZW Tones Ringtone content only
Content not eligible for My Media Retrieval (will be grayed out and unable to select within the My Media Retrieval Screen):
Full track songs
Wallpaper content
Ringback Tones (Ringback tones transfer automatically)
Non-VZW Tones Ringtone content
Premium Messaging Content (PSMS)
Mobile Web applications
V CAST Video
Expired subscriptions
Incompatible applications (device cannot support application)
Content purchases within 48 hours of ESN change
Content not transferred with any previous ESN change
Applications no longer supported through Media Center
Navigate to the www.verizonwireless.com, enter the 10-digit mobile number and password then click Sign In.
Click Media.
Click Learn More.
Click Get Started.
Ensure the desired items are selected then click Retrieve.
To continue, ensure I agree to the terms and conditions is checked then click Accept.
Download the desired items.
Ringtones
Downloading retrieved ringtones
Ringtones retrieved from the website will be sent via a picture message.
From the main screen, press the left soft key to choose Message.
Select Inbox then press the center of the 5-way navigation pad.
Select the desired picture message then press the center of the 5-way navigation pad.
Press the right soft key to choose Options.
Select Save (As) Ringtone / Save Sound then press the center of the 5-way navigation pad.
Enter a name for the file if desired then press the center of the 5-way navigation pad.

Using data values for member selection

Hello everybody:
I know there are functions to operate with members, strings, member names, ... so that you are able to convert from a string to a member (@MEMBER) and conversely.
But, is there any way to use a member value to select another member?. For example, if in the account dimension I have a member "parent" with value '100'. Could I save in the member '100' a value, using the '100' saved value in "parent" to select that member. So if its value is '200', I should save in member '200'.
Thank you
Regards,
Javier

Hello CM:
I apologize for the description :(.
There are three indicators: "InitDate", "EndDate" and "Parent". There is another dimension with three members: "1", "2" and "3" with these data:
"Parent" "InitDate" "EndDate"
"1" "Missing" 20120101 20120301
"2" "Missing" 20120201 20120228
"3" 1 "Missing" "Missing"
My intention is that "InitDate" and "EndDate" for "3" were values taken from member "1" based on "Parent" value for "3".
So my question was related to create this formula:
"ID" (
IF ("Parent" <> #Missing)
"InitDate" (current member) = "InitDate"->@??????("Parent");
"EndDate" (current member) = "EndDate"->@??????("Parent");
ENDIF;
That is, being able to recover value "1" in "Parent"->"3" to create cross-dimension "InitDate"->"1" and "EndDAte"->"1".
The problem is that I do not know how to recover a cell value (data) and use it for creating a member name. I think that functions like @NAME, @MEMBER, @ALIAS ... are based on using atributtes, strings, @CURRMBR functions and others, but not for values stored in that members.
I hope this helps you to understand better what I mean.
Thank you
Regards,
Javier
Edited by: Javi M on 25-May-2012 02:17

PS report: multible selection for report selection criteria

Is there a possibility to define multible selections in the report selection variables of a PS hierarchy report?
I tried to define them via
CJE6 -> EDIT -> General data selction
and entered valiables in the FROM column and the TO column. But when I execute the report it will not show multible selction, but only single selection. Also, I did not find a SAP standard report which has multible selection in the report selection criteria screen.
I found the multible selections only in the DB profile selection screen and the dynamic selection, but that is not the solution I am searching for.
Can anybody kindly help me with this?

E.g. S_ALR_87013532
here you can see multible selection in the DB profile selection group, but not in the report selection group. I would like to use multible selection in the report selection group, as mentioned above.
I am aware of the possibility of creating a new DB profile, but this is only my option B.

IPhone 5 showing no network when auto selected for carrier, select manually signal ok, software of hardware problem?

Hi,
I have a iPhone 5, since day one I have had poor reception, 1 bar, when my daughters Samsung S3 has 3 bars, same network btw. It makes me feel I bought the wrong phone. If one more person at Three or Apple tell me to restore my phone to factory settings, I am going to scream. Also when network is selected as auto, the phone, when it feels like it goes to no service. It is only when I select the network manually, does it get a signal.
The phone is still under Apple's 90 day support, I was reminded today by a Apple rep of this. After the 90 days I would have to buy Applecare for any software related problem. So basically if Apple do not ressolve the problem with my "not fit for purpose phone" within the 90 days, I will have to pay for it. This is not good customer service Apple, I am someone who has believed in your productsas I have an iMac and iPad. I waited years to get an iPhone because I had the 3GS, which I thought was crap, the iPhone 5 convinced me to give the iPnone another try, I have had nothing but problems with it, previous phone was a Samsung Galaxy Note, no problems at all.
Has any one else had this problem with the iPhone 5?, I thought it might be Apple's dreaded aerial problem that caused so many problems on the iPhone 4.
I would be grateful for some suggestions, I have already been advised to use it as an expensive doorstop, not funny.
Many thanks.

Well I had the exact same problem with my Iphone 5s, I tried many things such as turning the airplane mode on/off, restarting the device and also did a network settings reset. Nothing helped.
The next thing I did was to do a general reset via iTunes to factory settings (Made a backup first. Very important if you can connect to iTunes, it's a MUST). When the phone booted-up again, I had to ''activate the phone. But to activate it, I needed a connection with a network. But that was the whole problem so I was stuck and couldn't do anything with the device.
So I called the Apple support centre. We tried a few things, they all dindn't work. The last option (which worked for me) was to do a recovery (I have no idea what this reset is called) via the device+ iTunes.
To perform the reset, please follow these steps and hopefully it will work for you as well.
1. Open iTunes
2. Connect your USB cable to the computer, NOT to your device yet.
3. Power Off your device, and be sure that it is Off.
4. Press the home and hold it.
5. Connect the USB cable to your phone. You will see a iTunes logo on your device, you can release the home button.
6. Do a recovery via iTunes. iTunes will now recover the phone.
If it doesn't work the first time, try again. I had to do it twice and luckily it worked the second time.
I hope that this will help, Good luck!

Power BI - Office 365 data storage for Excel (Power Pivot & Power Query) architecture

Hi, I trying to find a comprehensive view of the Power BI architecture, specifically where the data for Power Pivot & Power Query files are held. I've seen reference to the Vertipaq Engine and the data being stored in the Excel File, however this is
in reference to 2010.
Other references I've seen (SharePoint on premise with Power Pivot) have shown me that the data held in the Excel files on the SharePoint sites are actually held in SQL Server instances.
Could anyone provide clarity on the architecture for Power BI please...
Tim
Thank you for you time folks!

Hi Tim,
let my try to explain this:
When you load data into Power Pivot it is actually loaded into Vertipaq (in-memory column-store) and it resides there until you close Excel. Technically speaking Power Pivot is a single-user SQL Server Analysis Services instance hosted within Excel. When you
close Excel a backup of the Power Pivot "database" is created and stored within the resulting .xlsx-file .
Any user that has access to the Excel file also has access to the Power Pivot model, so there is actually no security
This is very similar to any other excel file
Once the Excel is stored in SharePoint / SharePointOnline and is access the first time the backup that is stored within the Excel is restored into SQL Server Analysis Services instance running in SharePoint Integrate mode
all connections to the Excel-File are redirected to that SSAS instance. After some time of inactivity the model is unloaded from that SSAS instance again to free up the memory
the data itself so basically always resides inside Power Pivot or respectively the Excel file
Power Query only stores the actual query (= M-script) but no data
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

Deadlock detected during SELECT FOR UPDATE - an application error?

I have a general question about how Oracle prevents deadlocks from affecting
applications: do I need to build support into the application for handling
deadlocks when they occur in this particular scenario, or should Oracle handle
this for me? I'd like to know whether this is "normal" behavior for an Oracle
application, or if there is an underlying problem. Consider the following situation:
Two sessions issue individual SELECT FOR UPDATE queries. Each query locates
records in the table using a different index. These indexes point to rows in a
different order from each other, meaning that a deadlock will occur if the two
statement execute simultaneously.
For illustrative purposes, consider these rows in a hypothetical table.
ALPHABET
alpha
bravo
charlie
delta
echo
foxtrot
golf
hotel
Index A results in traversing the table in ascending alphabetical order; index
B, descending. If two SELECT FOR UPDATE statements concurrently execute on this
table--one with an ascending order execution path and one in descending order--
the two processes will deadlock at the point where they meet. If Session A
locks alpha, bravo, charlie, and delta, while Session B locks hotel, golf,
foxtrot, and echo, then neither process can proceed. A needs to lock echo, and
B needs to lock delta, but one cannot continue until the other releases its
locks.
This execution path can be encouraged using hints. Executing queries similar to these on larger tables will generate the "collision" as described above.
-- Session A
select /*+ index_asc (customer) */
from customer
where gender = 'M'
for update;
-- Session B
select /*+ index_desc (customer) */
from customer
where gender = 'M'
for update;
Oracle will recognize that both sessions are in a stand-off, and it will roll
back the work performed by one of the two sessions to break the deadlock.
My question pivots on whether or not, in this situation, the deadlock gets
reported back to the application executing the queries as an ORA-00060. If
these are the ONLY queries executed during these sessions, I would think that
Oracle would rollback the locking performed in one of the SELECT FOR UPDATE
statements. If I understand correctly,
(1) Oracle silently rolls back and replays work performed by UPDATE statements
when a deadlock situation occurs within the scope of the update statement,
and
(2) A SELECT FOR UPDATE statement causes Oracle, at the point in time the cursor
is opened, to lock all rows matching the WHERE clause.
If this is the case, then should I expect Oracle to produce an ORA-00060
deadlock detection error for two SELECT FOR UPDATE statements?
I would think that, for deadlock situations completely within Oracle's control,
this should be perceived to the application invoking the SELECT FOR UPDATE
statements as regular blocking. Since the query execution plans are the sole
reason for this deadlock situation, I think that Oracle would handle the
situation gracefully (like it does for UPDATE, as referenced in (1)).
Notice, from the trace file below, that the waits appear to be from row locking,
and not from an artificial deadlock (e.g. ITL contention).
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
With the Partitioning option
DEADLOCK DETECTED
Current SQL statement for this session:
SELECT XXX FROM YYY WHERE ZZZ LIKE 'AAA%' FOR UPDATE
----- PL/SQL Call Stack -----
object line object
handle number name
58a1f8f18 4 anonymous block
58a1f8f18 11 anonymous block
The following deadlock is not an ORACLE error. It is a
deadlock due to user error in the design of an application
or from issuing incorrect ad-hoc SQL. The following
information may aid in determining the deadlock:
Deadlock graph:
---------Blocker(s)-------- ---------Waiter(s)---------
Resource Name process session holds waits process session holds waits
TX-002f004b-000412cf 37 26 X 26 44 X
TX-002e0044-000638b7 26 44 X 37 26 X
session 26: DID 0001-0025-00000002 session 44: DID 0001-001A-00000002
session 44: DID 0001-001A-00000002 session 26: DID 0001-0025-00000002
Rows waited on:
Session 44: obj - rowid = 0000CE31 - AAANCFAApAAAAGBAAX
Session 26: obj - rowid = 0000CE33 - AAANCHAArAAAAOmAAM
Thanks for your insight,
- Curtis
(1) "Oracle will silently roll back your update and restart it"
http://tkyte.blogspot.com/2005/08/something-different-part-i-of-iii.html
(2) "All rows are locked when you open the cursor, not as they are fetched."
http://download-east.oracle.com/docs/cd/A87860_01/doc/appdev.817/a77069/05_ora.htm#2170
Message was edited by:
Curtis Light

Thanks for your response. In my example, I used the indexes to force a pair of query execution plans to "collide" somewhere in the table in question by having one query traverse the table via index in an ascending order, and another in descending. This is an artificial scenario for reproducible illustrative purposes, but similar collisions could legitimately occur in real world scenarios (e.g. a full table scan and an index range scan with lookup by ROWID).
So, with that said, I think it would be unreasonable for Oracle to report the collision as a ORA-00060 every time it occurs because:
(1) The UPDATE statement handles this situation automatically, and
(2) An ORA-00060 results in a 100+KB trace file being written out, only rational for truly erroneous situations.
I agree that, when the application misbehaves and locks rows out of order in separate SQL statements, then Oracle should raise an ORA-00060, as the deadlock is outside of its control. But in this case, the problem occurs with just two individual SQL statements, each within its own transaction.

Dynamic selections in a selection screen

Hi Gurus,
When I am using dynamic selections for a selection screen using FM "RS_SET_SELSCREEN_STATUS".
If I am using dynamic selection screen, the variants which I am able to save are not visible in the application toolbar of the seclection screen.
That is the variant button is not visible in the application toolbar of the selection screen. By this the user is facing problem to select the variant be'cos he is not able to see the variant button.
Please do help me to show this variant button on the application toolbar in the selection screen.
<b><REMOVED BY MODERATOR></b>
Regards
Mac
Message was edited by:
Alvaro Tejada Galindo

Hi,
When you use the "RS_SET_SELSCREEN_STATUS" you set the application tool bar and others.
In your PF-Status include the an item for Variants with the details below
Function Code - GET
Function Type - E
Function Text - Get Variant...
Icon name - ICON_VARIANTS
Fast Path - V
let me know if that works.
Regards,
Santosh

How to set the first row as selected in single selection of table

when the page renders how do we make the first row as selected for single selection in a table.
Thansk a lot for your help

set the selection Attribute's value to 'Y' for the first row. Thats enough.
eg;
Row row=vo.first();
row.setAttribute("SelectionAttribute", "Y");
--Prasanna

Search help for characteristic in BEx

Hi experts,
I need to change the search help for variable of characteristic in BEx. When I look search help of data element for characteristic it is another search help than I see in BEx dialog. How can I edit search help for BEx, where can I set it?
Regards,
Gennady Posevin

If your characteristic is reference of another one, the search used is the search used for referenced char.

Data selection for Characteristic Selection in BW query

Similar Messages

Maybe you are looking for