Data Selection in Init Infopackage
Hi All
I want to schedule a Delta Upload on a ODS to load data to another ODS
For this i created a init load infopackage. I want to give some Data Selections for load. But in the Data Selection Tab I am unable to see any selection options
The same infopackage if i select Full upload I can see the Selection options how do i get all these selection options in init infopackage aswell.
Regards
Akshay Chonkar
Hi Akshay,
You Cant have a Dataselection option in Initiazation option, however, you if you still want to have a Dataselection option as you wish (Say Document posting date from -to) in delta from ODS 1 to ODS2. You can change the update rule for the By writting a routine or can give the create your rule for selection of your own selection. but i am not sure youcan use ranges
(From- to) in update rule.
Reward points if helpfull
Regards
Hari
Similar Messages
-
Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks -
"Error occurred in the data selection" on init delta load ODS- InfoCube
Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC) -
Data Selection tab in infopackage
Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham -
How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s
Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
PhilipsHello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips -
Data selection tab of infopackage
hi all,
how do we select data from infopackage if you do not want a certain value?
I wrote ABAP code to select not as:
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-option = 'NE'.
L_t_RANGE-low = 'Y'.
But I got errors. Sign 'I' with 'NE' is not allowed. Please advise.
LindaLinda,
<b>Exclude Option won't work in the Infopackage data selection routine.</b>
You can use SIGN equals to I only and option values EQ, CP and BT.
Try append all the required values. use BT as well as eq.
If you want to permenantly exclude those to BW. you have 3 good options along with Infopackge Selection.
1. <b>User Exit in the Source System.</b>
2. Start Routine in the Transfer Structure.
3. Start Routine in the Update Rules.
all the best.
Regards,
Nagesh Ganisetti.
*assign points if it helps. -
Parameterized Data Selection in Scheduler Infopackage in BW
hei...is there any way that i can parameterized the data selection in the scheduler infopackage? When i wanna load the data from the scheduler, the data selection will change based on the source systems. Let say today got data in the source system, then the scheduler can auto select today's date to load the data, if let say next monday 25th of feb got data, then the scheduler will auto select the date 25th of feb and load the data from the source system to BW.
thanks...Hi,
Not sure I understood this fully.
For each source system there would be 1 infoapckage as it is created on the datasource.
Now for your requirement you can write a routine inside the infoapckage to load the data for the current data.
Bye
Dinesh -
Mandatory data selection field in infopackage
Hello together,
Do you know how to mark as mandatory one filed from data selection tab in the infopackage? I would like the load not to start if the field is not filed.
Thank you,
IulianaYou can update the table RSOSFIELDS for the datasource by writing an abap code like this
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'M' where
OLTPSOURCE = '<your datasource name>' and
FIELD = '<field on which mandatory selection is needed>'.
Regs
Gopi
Assign points if it helps. -
BW : Data selection customizing in InfoPackage
Hi everybody!
In BW, RSA1, I have an infopackage, that I run monthly.
It's not a delta.
I have a field "month" in the data selection tab.
This value should be the same as the loading month.
Is there a way to fill the field with an external routine ?
Thanks a lot for any reply.
François LeyssenneThanks a lot!
I never saw that stuff, yet it seems very very usefull!
François -
Does the data selection on an infopackage only allow a range
Will the data selection tab on an infopackage allow for multiple single values or just a range? I have a routine that loads speciific plants. I'm not getting an error but when I run the infopackage but it seems to be grappbing data for all plants
It will allow multiple selections..
You need to place the cursor on the required object in the data selection field, and then click on + (Plus) icon at the bottom this bill bring one more entry for the same object.
Like this you can make multiple times to maintain the multiple Selections..
Hope this helps.. -
How to change date selections at Infopackage data selections in production sys
Hi All ,
we are loading data into Infocube from datasource ,one process chain for delta init with data transfor ,which has data selections at infopackage say 06.2014 and other process chain for delta which has same selections at infopackage . Now I want change this data selections at Infopackage level .
I Have tried to change these dates in data selections at infopackage level , tho I have changed and saved to future date at delta initial with data transfor ,it's keep coming back to 06.2014. Of course data selection at delta Infopackage level is faded .
I Want to set future date with delta int with disturbing delta loads . How to do it please .
regards
hariHi Ram,
We will load delta Intial with data transfer every weekend , and we run delta everyday , because we do delta init with data transfer with selections say ( 01.20011 to 12.2003 ) every weekend , hope I need to create new delta infopack with new data selections say ( 01.2004 to 12.9999) only to get update data in Infocube.
Please correct me if I am wrong .
Regards
hari -
Data Selection in Infopackage not picked.
Hi,
I have a generic datasource. I have data selections in the Infopackage. Say, I have Data selection for Plant as "5000". But, data for all Plants are getting pulled for all Plants. Why is this Selection not picked ?
Thanks.hi, what type of datasource is yours.. is the selection parameter handled in the definition of ur datasource?
-
Data selection in infopackage to exclude 3 values
Hi,
I want to exclude 3 values for ZCOUNTRY field in the data selection of an infopackage. I don't want to do this using start routine(in transfer structure or update rules). I just need to do the coding in infopackage level. Can anybody plz tell me the ABAP coding for this in detail?
Thanks,
ChandanHi,
correct, but once you have defined an ABAP routine in your IPack for the country (select type 6 "ABAP" in the IPack selection of the country) why not to exclude the countries directly?
I've never had this req but the hereunder should work (it should exclude countries US and CA from the selection)
data: wa_range LIKE rssdlrange.
READ TABLE l_t_range with key fieldname = 'COUNTRY'.
MOVE l_t_range-iobjnm TO wa_range-iobjnm.
MOVE l_t_range-fieldname TO wa_range-fieldname .
MOVE 'E' TO wa_range-sign.
MOVE 'EQ' TO wa_range-option.
MOVE 'US' TO wa_range-low.
CLEAR l_t_range-high.
APPEND wa_range TO l_t_range.
MOVE 'CA' TO wa_range-low.
APPEND wa_range TO l_t_range.
p_subrc = 0.
hope this helps...
Olivier. -
ABAP Routine in the Infopackage data selection
All,
I have requirement where i need to write a routine on a Date field(Activity Year Month) which has to return values from the first to the last day of the Previous month in the data selection of the infopackage.
I know that on Date there is a STD that can be used but my requirement is on Year Month.
there are 3 vartypes available
5. free temporal selection
6. ABAP routine
7. OLAP variable
when i pick ABAP routine it asks me to create a routine i need some help with the code here
Can someone help.
ThanksHi there
If the Data field is 0FISCPER you can use the OLAP variable 0P_PRFP1. If you have developed the field yourself i think you need to write code. The code could look something like this.
DATA: sysdat TYPE d.
sysdat = sy-datum.
sysdat4(2) = sysdat4(2) - 1.
IF sysdat+4(2) = '0'.
sysdat+4(2) = '12'.
sysdat(4) = sysdat(4) - 1.
ENDIF.
CONCATENATE sysdat(4) '0' sysdat+4(2) INTO l_t_range-low.
MODIFY l_t_range INDEX l_idx.
p_subrc = 0.
This code returns the previous months as a single value.
Chris -
Abap Routine for Date selection in Infopackage
Hi
I have to write an abap routine for date selections in the infopackage,
There are two date begda and enda.
Do i code for BEGDA and fill in the begin date using routine and use another routine to fill the ENDA.
JPJPHi JP,
If you have two info objects BEGDA and ENDA in the Info package for selection
then you will have to write seperate routine for each of them.
If you want to give single value for each date field then update only the field l_t_range- low otherwise if you want to give range then you can update the internal table fields l_t_range-low and l_t_range-high .
Regards,
Prakash
Maybe you are looking for
-
Crystal Report Viewer Credential Prompt for Report with Dynamic Parameters
The .NET Crystal Report Viewer is prompting for database credentials when launching a report containing dynamic parameters. This only occurs for reports created with SAP Crystal Reports 2011 designer. Reports created with Crystal Reports XI designer
-
Not downloading TV series - telling me I'm using a different Apple ID but I'm not
I downloaded two episodes of a TV show ("Touch") to my iPad and watched them. I then paid for the rest of the season of the TV show as one purchase (on the same iPad) to get the discounted price. I then downloaded the next episode of the TV show on t
-
What's the impact of rowid materialized view in oracle 10g
Hello to all ; Oracle official docs saying ROWID materialized views should be used only for materialized views based on master tables from an Oracle7 database, and should not be used from Oracle8 or higher. For 10g or higher versions can we conside
-
Adding a new field to the search help exit
Hi friends, adding a new field to the search help exit. How does it work ? Thanks in advace Ilhan
-
Hi everyone, I am trying to get to the bottom of this mystery. "Italian Pro" is the keyboard I use almost all the time, and for some reason this zoom shortcut won't work. Another user assured me that "cmd-+" is the shortcut also in that keyboard. Min