Data Selection is disabled in Infopackage
Hello Friends,
I am facing a small problem.
I want to pull data for an infosource 2LIS_05_UDN.
Now there are already infopackages existing for the infosource, but it is not allowing me to select date range, the data selection is disabled.
How do i go about it??
Thanks in advance,
Regards,
Anuradha Vakil
Hi,
are you trying to load the data through a package with option of delta load.
Then you cannot give the selection.
You can give selection only for full load and init packages and not delta packages.
also you can check in RSA3 in the source system if you have any selection options for that data source or not.
Thanks
Similar Messages
-
Data Selection tab in infopackage
Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham -
InfoPackage Data Selection ignored
Hi
I have a weird issue that I hope someone can advise me on. I have created an identical generic datasource based on table USR02 in our CRM, R/3 and BW systems. Then in BW I have 3 InfoPackages (one for each datasource) with identical data selections. For the InfoPackages using the CRM and R/3 datasources I get exactly the records I expect but for the BW InfoPackage I get all records irrespective of the data selections!?
Why are the data selections ignored for the InfoPackage using the BW source system - any ideas?
Thanks
GarethTo All
Finally found the problem. Basically the datasource in BW had the 'Field only known in customer exit' checkbox checked for the TRDAT field. I hadn't set this - the system did and would not allow be to change it. However I found SAP note 895801DataSource fields are interpreted as customer fields which seemed to suggest that this was the real problem.
I applied the note and re-created the datasource and it now work as expected.
Regards
Gareth -
How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s
Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
PhilipsHello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips -
Generic Data Source and InfoPackage Data Selection
Hello, I'm trying to extract data from a generic data source (composed of a view joining 4 tables) using the Data Selection Criteria in an infopackage. Sometimes the selection criteria is ignored and more data is pulled than expected. The number of selectable items in the generic data source has been reduced (in case this was an issue) and for a short time the infopackaged pulled the expected number of records. Then another change was made to the generic data source and the problem returned. In any case, the transported generic data source does not work in the target system either. I'm not sure what is causing this to happen. Any ideas??? BW 3.5.
Regards,
Sue
Message was edited by: Sue and Enrique
Ramesh PHi,
Some of the datasources will not have default Infopackages for them.You can create the infopackages according to the requirement.There is no big deal for creating Infopackages.You can go ahead creating them.
Regards
Karthik -
How to debug an OLAP variant which is in Infopackage Data selection Tab
Hi experts,
How can I debug an OLAP variant used in the data selection tab for an infopackage? The loading is done via process chains. I am trying to debug the SAP delivered OLAP variant 0P_PPER3 of infoobject 0FISCPER3 (SAP exit). If I am not mistaken I believe the function module is RSVAREXIT_0P_PPER3. Thanks.Hi Mark !
This method is always good (if you have authorization to work in SM50):
put before your code an endless loop like this one:
data flag type c.
clear flag.
do.
if flag = ' '.
exit.
endif.
enddo.
then start your load...go to SM50 and here you will see your process looping on the same pgm...highlight the process and access into it in debug mode from the menu...
here you can change flag in 'X', exit from the loop and continue all the process in debug !!!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here ! -
Special Characters in InfoPackage Data Selection
Hi Experts,
Is it possible to include special key such as * in the data selection tab in the infoPackage? e.g. *AB
I have created a custom DataSource to extract all work order with costs data.
However we only need work order data with revision number that finishes with 'AB' for reporting. (if I do not apply this selection, extracted data will be too big).
i.e.
REVNR
00000012AB --> to be included in extraction
00000231AB --> to be included in extraction
00012322AB --> to be included in extraction
Y07WK06 --> excludes this record
00000007AB --> to be included in extraction
Can this be achieve by using '*AB' in the data selection screen?
Currently, SELOPTS of custom DataSource is been set to '0'. (where can I change this SELOPTS value to something else?)
If special key is not allowed in the data selection screen, can you suggest any alternative solution?
Kind regards,
SteveHi steven,
Yes you can do this one at info package level by selecting the ABAP Coding at Type (variable change for selective values) at selection tab of info package.
Here you need write ABAP coding according to your business requirements .
or
You can drop unnecessary data at update routine.
Regards,
PRK
Message was edited by: PRK -
Parameterized Data Selection in Scheduler Infopackage in BW
hei...is there any way that i can parameterized the data selection in the scheduler infopackage? When i wanna load the data from the scheduler, the data selection will change based on the source systems. Let say today got data in the source system, then the scheduler can auto select today's date to load the data, if let say next monday 25th of feb got data, then the scheduler will auto select the date 25th of feb and load the data from the source system to BW.
thanks...Hi,
Not sure I understood this fully.
For each source system there would be 1 infoapckage as it is created on the datasource.
Now for your requirement you can write a routine inside the infoapckage to load the data for the current data.
Bye
Dinesh -
Mandatory data selection field in infopackage
Hello together,
Do you know how to mark as mandatory one filed from data selection tab in the infopackage? I would like the load not to start if the field is not filed.
Thank you,
IulianaYou can update the table RSOSFIELDS for the datasource by writing an abap code like this
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'M' where
OLTPSOURCE = '<your datasource name>' and
FIELD = '<field on which mandatory selection is needed>'.
Regs
Gopi
Assign points if it helps. -
Does the data selection on an infopackage only allow a range
Will the data selection tab on an infopackage allow for multiple single values or just a range? I have a routine that loads speciific plants. I'm not getting an error but when I run the infopackage but it seems to be grappbing data for all plants
It will allow multiple selections..
You need to place the cursor on the required object in the data selection field, and then click on + (Plus) icon at the bottom this bill bring one more entry for the same object.
Like this you can make multiple times to maintain the multiple Selections..
Hope this helps.. -
hello,
Data Selection is disabled in IP loading from one DSO to another DSO.
Could you tell me how to add the selection infoobject in IPHi,
Goto RSA3 in BW and then give 8<your ODS name> an dchekc the data, then goto RSA6 and find your DataSource then click on Change icon and then Select the Fileds which are required for data selction.
ALso try with RSO2 and give 8<DSO Name > change then select the fields.
Thanks
Reddy -
Selection condition in the infopackage for initializing delta
How does the selection condition in the infopackage help in initializing delta?
Hi,
You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
Regards,
Shilpa -
Complex Data Selection Criteria
Is it possible to do complex Data Selection Criteria invloving more than one InfoObject in Data Selection tab of the InfoPackage?
Eg :
(Controlling area = 'ABC' and Fiscal Period between 001/2005 & 003/2005)
OR
(Controlling area = 'AAA' and Fiscal Period between 004/2005 & 008/2005)
OR
(Controlling area = 'XYZ' and Fiscal Period between 003/2005 & 008/2005)
We are currently planning to use 3 different InfoPackages to do the same and checking if it can be done in 1 InfoPackage.
Thanks!BAPI_IPAK_CHANGE is a good option, but will not give you the flexibility you are looking for as it will change the selection criteria, but will not give you the AND, OR (complex selection)option, that you are looking for. What you will end up havig to do if you follow this route is to call the same selection package 3 times with modified selection criteria for each using BAPI_IPAK_CHANGE, or have to use BAPI_IPAK_CREATE to create the infopack with these selection for every load. This will eliminate all or any delta loading hopes that you may have.
I feel that infopackage group will work nicely for you and with minimal effort of maintenance in the future.
Rishi
Message was edited by: Rishi Joseph -
Data Selection in Infopackage not picked.
Hi,
I have a generic datasource. I have data selections in the Infopackage. Say, I have Data selection for Plant as "5000". But, data for all Plants are getting pulled for all Plants. Why is this Selection not picked ?
Thanks.hi, what type of datasource is yours.. is the selection parameter handled in the definition of ur datasource?
-
Data Selection in Init Infopackage
Hi All
I want to schedule a Delta Upload on a ODS to load data to another ODS
For this i created a init load infopackage. I want to give some Data Selections for load. But in the Data Selection Tab I am unable to see any selection options
The same infopackage if i select Full upload I can see the Selection options how do i get all these selection options in init infopackage aswell.
Regards
Akshay ChonkarHi Akshay,
You Cant have a Dataselection option in Initiazation option, however, you if you still want to have a Dataselection option as you wish (Say Document posting date from -to) in delta from ODS 1 to ODS2. You can change the update rule for the By writting a routine or can give the create your rule for selection of your own selection. but i am not sure youcan use ranges
(From- to) in update rule.
Reward points if helpfull
Regards
Hari
Maybe you are looking for
-
ICal and iPod Touch won't synch
I have an iPod Touch (OS 4.0) that I had been synching with my iCal (4.0) through iTunes (9.2.1) on my Mac (OS X 10.6.4). I am the only user of all of these. I have 5 calendars in iCal. Several problems have started occurring (many months after purch
-
How to set-up Time Machine after Restore
After having restored an entire system back from Time Machine, it looks to me as Time Machines wants to completely backup all data already held on the hard-disk. With this effect, the harddisk is not big enough. I do not want to buy another disk. Is
-
The bottom row of icons on my screen are frozen iPhone 4
I
-
Currency issues while booking travel expenses
Hi Experts, I have configured Travel Management for India, while processing Travel expenses facing the following issues from user. 1.Meals & Meals-Paid is showing over limit separately instead of consolidate for per day. The same error is pop up agai
-
New unofficial nForce drivers v 3.44
Dont know if theses are for real yet but could be worth a look from this post here: http://www.amdforums.com/showindex.php?s=3b02271de2e393ecdef94ae09c416909&threadid=239873 drivers: only XP and 2k http://fernando.darocha.free.fr/nforce_xp-344.exe ht