Data Selection tab in infopackage

Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?

Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham

Similar Messages

How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s

Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
Philips

Hello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips

Data selection tab of infopackage

hi all,
how do we select data from infopackage if you do not want a certain value?
I wrote ABAP code to select not as:
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-option = 'NE'.
L_t_RANGE-low = 'Y'.
But I got errors. Sign 'I' with 'NE' is not allowed. Please advise.
Linda

Linda,
<b>Exclude Option won't work in the Infopackage data selection routine.</b>
You can use SIGN equals to I only and option values EQ, CP and BT.
Try append all the required values. use BT as well as eq.
If you want to permenantly exclude those to BW. you have 3 good options along with Infopackge Selection.
1. <b>User Exit in the Source System.</b>
2. Start Routine in the Transfer Structure.
3. Start Routine in the Update Rules.
all the best.
Regards,
Nagesh Ganisetti.
*assign points if it helps.

Data selection tab?

hi
in 3.5 if i select check box at transfer rules , i can see all objects at data selection tab at infopackage, in 7.0 if i want see objects at data selection tab, what is option.

HI Suneel
In dtp IN extraction tab we have something called Filter, if u select the object here then it will be available in data selection tab...
Assign points if it helps
Khaja

How to debug a ABAP Routine which is in Infopackage Data selection Tab

Hi ,
Please let me know How to debug a ABAP Routine which is in Infopackage Data selection Tab.

Hi,
You can try to create infinite loop:
DATA: STOP.
WHILE STOP IS INITIAL. ENDWHILE.
Start InfoPackage and then go to SM50 and swich on debugging for your process. Then in debugger you can change value of STOP variable to skip the loop.
Krzys

Can't find 0FYTLFP OLAP Variable in InfoPackage Data Selection tab on 3.5

On BW 3.5, when generating an InfoPackage with the datasource as Purchasing Data(80PUR_C01), under Data Selection tab, for the InfoObject 0FISCPER, I selected 7 (OLAP variables)for the Type column, then click the button next to it and under the column of Details for Type to bring up a window, but when expending the OLAP Variable field list, can't find the following value in the list which shows up on BW 3.1:
0FYTLFP     0FISCPER Cumulated to Last Fiscal Year/Period (SAP Exit)
How to make the above value show up in the OLAP Variable list?   I thought maybe the variable 0FYTLFP needs to be installed in Business Contents, but there is no variable object type in Business Content. It sounds like a SAP Exit, but how to make the SAP Exit value show up on BW 3.5?
Thanks for everyone's input!

hey Rohit,
Besides the three variable values in the list on BW 3.5, now I find a new one in the list, called "0E_ROLE     0SR_ROLE     Role (SAP Exit)", I have no idea why this one shows up now. Now all the four variables in the list are:
1. 0CML12LM     0CALMONTH     Last 12 Months Excluding the Current Month
2. 0CMONTH     0CALMONTH     Current Calendar Month
3. 0E_ROLE     0SR_ROLE     Role (SAP Exit)
4. 0S_RQMRC     0REQUID     Most Current Data
0FYTLFP is still not in the list!   We can't try to create BEx query since our BW 3.5 system is just installed and we have not got to the step to ceate a query. I try the 2nd way you suggested by pressing F6 on this variable with the typed in value 0FYTLFP, get the following msg "BEx variable 0FYTLFP could not be evaluated - No error message", that means it would not work on BEx query as well, right?
What could be the reason that we can't see 0FYTLFP variable in our new installed BW 3.5? Do you think our BASIS missed installing sth?
Thanks
Message was edited by: Kevin Smith

How to debug an OLAP variant which is in Infopackage Data selection Tab

Hi experts,
How can I debug an OLAP variant used in the data selection tab for an infopackage? The loading is done via process chains. I am trying to debug the SAP delivered OLAP variant 0P_PPER3 of infoobject 0FISCPER3 (SAP exit). If I am not mistaken I believe the function module is RSVAREXIT_0P_PPER3. Thanks.

Hi Mark !
This method is always good (if you have authorization to work in SM50):
put before your code an endless loop like this one:
data flag type c.
clear flag.
do.
if flag = ' '.
exit.
endif.
enddo.
then start your load...go to SM50 and here you will see your process looping on the same pgm...highlight the process and access into it in debug mode from the menu...
here you can change flag in 'X', exit from the loop and continue all the process in debug !!!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

Change the data selection tab page in an InfoPackage

Hi SDN Community,
Is it possible to have an Infopackage and change the data selection tab page ? Because I would like to know if I can change the select-options by a parameter.
For example: Now you can enter 01.01.1950 as the start date and 31.12.9999 as the end date,
I only want that the user enter the start date.
Thanks a lot,
best regards.
Ana

Yes, I tried an abap routine option and the result is not good because the user can't put the information in the low (start date) parameter.
Thanks

Routine in Infopackage Data selection Tab

HI,
I am having one InfoObject (marital staus) in InfoPackage Data selection Tab.
Now I want to write a ABAP routine for that infoObject in Infopackage to select only those records of marital status = SINGLE.
    I am new to ABAP . please let me know what code should I write in this routine.

Hi Kris,
You would do it like this:
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'MARITAL_STATUS'.
          l_idx = sy-tabix.
          move: 'I'      to l_t_range-sign,
                'EQ'     to l_t_range-option,
                'SINGLE' to l_t_range-low.
          modify l_t_range index l_idx.
Thanks,
Joseph

Data Selection in Init Infopackage

Hi All
I want to schedule a Delta Upload on a ODS to load data to another ODS
For this i created a init load infopackage. I want to give some Data Selections for load. But in the Data Selection Tab I am unable to see any selection options
The same infopackage if i select Full upload I can see the Selection options how do i get all these selection options in init infopackage aswell.
Regards
Akshay Chonkar

Hi Akshay,
You Cant have a Dataselection option in Initiazation option, however, you if you still want to have a Dataselection option as you wish (Say Document posting date from -to) in delta from ODS 1 to ODS2. You can change the update rule for the By writting a routine or can give the create your rule for selection of your own selection. but i am not sure youcan use ranges
(From- to) in update rule.
Reward points if helpfull
Regards
Hari

Adding a field in data selection tab of Info Package

Hello,
how can I add a field for selection in the data selection tab of the info-package in BW 3.5.
Thanks,
SD

Hi,
You need check Selection in RSO2 in ECC then that field is available for Selectgion in InfoPackage.
Here I'm giving 0CUST_SALES_ATTR DataSource Example for Selection Change, so see the logic and accordingly you can change your DataSource Selections.
See the properties of that field in RSA2 in ECC and you can also make it for selection, use the following program and see it.
In ROOSFIELD table give the datasource 0CUST_SALES_ATTR and see , select only Active version Fields.
For the following fields you can find FIELD = X, it indecates that it is abailable for selections, so in this way you try to do it by using following program and check.
KUNNR
SPART
VKORG
VTWEG
REPORT ZBI_ROOSFIELD NO STANDARD PAGE HEADING .
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'X' where
OLTPSOURCE = '0CUST_SALES_ATTR' and
FIELD = 'FAKSD '.
Also see SAP Note : 1033847
Re: Field Selection in Datasource 0CUST_SALES_ATTR
Thanks
Reddy

Problem in data selection tab in infopack

Hi,
I created one text datasource ZACCOUNT_GRP_TEXT based on infoset.
in r/3 , SPRAS is selected as a selection field .
but wen i created the infopak for this , in data selection tab its not giving me the option of sparas selection dats coming blank .
plz let me know the reason why data selection tab is blank and how i can correct it.
thnx

hi,
go to extract structure and see whether the selection coulmn is checked for this field.
if not check then check and save it.
now go to rsa3 and see wheter the field is coming in selection.
if yes then replicate the datasourcee to the bw.
now create the infopackage u get the field in IP.

Routine in data selection tab

hi friends,
i need to write routine in data selection tab , i need like when ever i open need to show current data.
how can i write coding.
i have code like this, please correct my code
L_t_RANGE_IOBJNM = '0CALDAY'.
L_t_RANGE-FIELD NAME = 'CALDAY'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
L_t_RANGE-LOW = sy-datum .
I DIDNT UNDERSTAND HERE WHAT IS ACTUALLY IOBJNM WHAT DO U MEAN BY LOW AND HIGH ACTUALLY. FIELD NAME MEANS I NEED TO MENTION LIKE/BIC/ZMNO LIKE .
THANKING U,
SUNEEL.

Check below link to understand the RANGE type objects in ABAP. The OBJNAM is the object name which is used for selection in the InfoPackage. l_t_range is the internal table which contains all the selections used in the InfoPackage. So, if you need dynamic selections you have to code to populate dynamic values for the corresponding InfoObject in this Internal table. Low/High are the fields which actually contains the "From" and "to" range in selection.
Option - <,>,=, <> etc.
Sign -Include/Exclude (I/E)
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/content.htm
Regards,
Sree

Data selection tab from Info package.

dear all,
I'm using BI7 for my project. I have 1 simple question, how do you un-select a data target from the data selection tab?
e.g.
in the data selection i have 2 DSO
0DSP_1 and ZDSP_1... how do i remove DSO 0DSP_1 from the selection tab?

If you are using an infopackage...
under Data Target tab you are seeing 2 DSO.
in order to select only one: select the option "Select Data targets"
and then select the DSO which you want to load.
If you compeltly doesn't want to use the 2nd DSo then delete the update rules between the infosource and DSO.

"Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.

Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks

Data Selection tab in infopackage

Similar Messages

Maybe you are looking for