Data series property not visible in the chart properties

Hi Experts,
We are using BI 7.0 and I am trying to open the data series property so that i could use a trend line in my bar chart in WAD.
But when i double click on the chart web item, it doesn't open the chart wizard. And it doesn't have the data series property in the properties of the chart item.
I wonder what the problem is.
Any help is appreciated and rewarded with points.
cheers,
Sri

Thanks Matthias. When i try to select edit by right clicking on the chart item or click on this edit button in the parameters screen, i get an error.
The error says:
An unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the appln will be shut down immediately.
The Specified module could not be found.
If i click continue, nothing happens and i dont find this data series property in the parameters screen.
Thanks,
Sri

Similar Messages

Error F5507 on MIRO. "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000"

I was doing a MIRO w.r.t PO. I was getting the following error - "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000." I later went ahead and created the GL Account in the COA. now the error is recitified. But, I would like to know what happens in the background.
Could someone explain me this? How is the G/L account determined?

Hi,
At the time of MIRO system posts below Accounting Entry:
GR\IR Clearing Account Dr--> This will be picked from t-code OBYC- key WRX
Vendor Account Cr--this will be picked from vendor master data
If there are any tax or TDS involved then system post to those accounts as well.
I guess 161000 is your recon account? Because if it is GR\IR then you would have got error at the tim e of MIGO ( if you have already done that)
Hope this is clear to you.
Br,Vivek

Dashboard data not visible for the users - buffer issue?

It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
What can be the problem?

Hi,
IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

ESS job created not visible in the list of 'Scheduled Process'

As a part of data migration , I am required to invoke an ODI scenario using a java program which in turn is invoked by an ESS job.I'm able to do the same using a standalone application created in my jdeveloper.For incorporating this into the Fusion application I created an ADF Model Project in the hcmEss Application and created a sample javaclass and jobdefinition in the project,similar to what i did in my standalone application.
I have included my job definition in the MarHcmEss and included the MAR file in the EarHcmEss.Also I have given the jazn security for my job,similar to other visible jobs.Still the job that I created is not visible in the list of jobs in the 'Launch ESS Monitoring UI'
All this i tested using a deployment of hcmEss and hcmTalent Applications into my standalone weblogic server.Is there anything that i might have missed during the process?.I am new to ESS.
Thanks,
Ajin

I'm facing the same issue.
Also I'm unable to populate the values from the Resource Bundle in the Localization section of Job Definition.
Any help will be appreciated.
Thanks,
Sangita.

The "J2EE process table" node not visible in the SAP MMC

For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
Srini

It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

Images are not visible in the iPhone.

When I open iTunes there are number of images found in the iPhone, but the images are not visible in the iPhone actually.

I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me.

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

[Solved]Web Service Data Control operation not visible in Data Controls

Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I'm using CVS so I think maybe some files were write protected while creating the control.
These are the files where Data Control is written to:
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
                      ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
                      SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
                      SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
                      BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
    <Source>
      <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
                  provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                  wsdl="my_wsdl_location">
        <service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
          <port name="MyServicePort">
            <operation name="initiateMyService">
              <dataformat format="XML"/>
            </operation>
          </port>
        </service>
      </definition>
    </Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
          BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
    <ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
Brokenbone

Found out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB

[Solved]WS Data Control operation not visible in Data Controls in JDev

Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I tried on JDev forum but had no success.
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
                      ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
                      SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
                      SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
                      BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
    <Source>
      <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
                  provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                  wsdl="my_wsdl_location">
        <service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
          <port name="MyServicePort">
            <operation name="initiateMyService">
              <dataformat format="XML"/>
            </operation>
          </port>
        </service>
      </definition>
    </Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
          BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
    <ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
Brokenbone

Found out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB

Sales area data view is not visible

Hi All,
the salea area data view is not visible for all BP roles in BP master data
please help me how can i need to put in a visible

hi
sales area data tab is not visible for each and every BP role,
it is visible for sold to party,ship to party roles,
there is aview associated with this role that is CRM 000
if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
likewise the consumer role also has sales data info so sales area data tab is visible in this role too
hope it clears all your doubt,
in case of any doubt do revert back
best regards
ashish

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new?

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?

http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go.....

Data series property not visible in the chart properties

Similar Messages

Maybe you are looking for