Data Service Problem 9200
I have Black Berry 9200, recently purchased using Data Services of TATA DOCOMO.
My handled automatically loses the Data Services Signals and "EDGE" displays in small letter "edge", for getting Data signals I am to switch off the mobile. On the other hand I am getting proper signals of Mobile.
Kindly help me to solve this problem.
Hi taqddus,
Simple logic is whenever you see a small letter " edge " it means at that time you are not connect to BIS ( provided that you hold a BIS or BES ) it may be because of some network failure ,However at that time you can call or send text message which is not related to BIS but to your carrier,to check that whenever you see "EDGE " turn small case " edge " Go to > Manage connection > Service status > Blackberry Internet Service > you can see it is " not connected."
Whenever you see or feel any unsual in your device always the advice is just perform a battery Pull Reboot like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot. O ur device also require restart just as our PC . Do let us know if you feel any problem.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
Hi guys, im new here.
i recently bought a used 8900 from ebay. its unlocked, was originally on orange but i am using it on o2. sending messages, making calls, using the browser is fine. however BBmessenger does not work, doesnt recieve invites ore send them, and when i try to use the face book app it shows "data service could not be contacted"
i am aware that o2 have a different bolt on for blackberry services, which i have now got, but still no data service. i have also tried the host routing table request, but it confirms the reques is sent, but i get nothing after it.
any help would be great....
ChrisOn your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device: http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Are there data service problems in the northeast on 10/23/14?
Data speeds on my phone are very slow today and applications are not loading or having errors connecting to servers. I am wondering if there are issued due to the thunderstorm last night that came through the Northeast. Someone help?!?!?!
That's quite strange, vwguy818! What zip code are you in? Please run a speed test on speedtest.net and share your results.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
Zend AMF Data Service Return Problem
Hi Folks,
I am working with FB4 and Zend AMF/PHP and MySQL. I began integrating the PHP stuff using the great article by Mihai Corlan called 'Working in Flash Builder 4 with Flex and PHP. I followed all the steps exactly, aside from creating my own app-specific PHP classes and functions, etc... I 'hooked up' the Zend stuff just like the article, created a text datagrid, just like the article, and viola!, it worked. I then tweaked it a bit and interwove it into my 'real' component. So far, so good.
Then I created a second PHP class with a different 'get data' type of function. It queries a different table in MySQL, but is essentially the 'same' as the query/function in the initial PHP class.
In FB, in the Data Services window, I choose the 'Connect to Data/Services' function, just like the first time. I then find/select my PHP class file and FB 'interrogates it' enough to show me the function that exists in the class. I 'finish' the operation and it adds a new 'service' to the list of services in that window. Again, so far, so good.
The problem comes when I try to 'test' the service or 'configure return types' (which basically requires a 'test' operation anyway). I can enter the 'input' params just fine, but when I try to execute the call, I get the following error:
InvocationTargetException:There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
Reason: An error occured while reading response sent by server. Try encoding the response suitably before sending it. e.g. If a database column contains UTF-8 characters then use utf8_encode() to encode its value before returning it from the operation.
I don't know where to go after this. Again - the 2nd PHP class is essentially identical to the 1st. The function in it is essentially identical, differing only by the input params, the name of the function and the actual SQL it sends to MySQL. There is no special text, no special characters, no image stuff, nothing. I do not 'encode' the results of the function in the first class - in fact the code in the second class is practically identical to the first. I do not know what the error is talking about. My guess is that it's more of a generic message.
I can debug the PHP code just fine from within a seperate instance of Eclipse. The function runs/returns just fine - an array of PHP-defined objects (simple strings).
Any insights or advice would be welcomed. Thank you,
-David BaronThank Jorge, but that was not the issue, though, it may be related.
I checked the mySQL my.ini file, and there was already an entry for:
[mysql]
default-character-set=utf8
I added the 'default-collation=utf8_unicode_ci', like you suggested, but that didn't do anything.
I checked the Apache httpd.conf file, and added the following line 'under' the "DefaultType text/plain" line:
AddDefaultCharset UTF-8 but that did not do anything.
I checked my mySQL database, all the tables involved. They were already at UTF-8 (default). However, some of the 'varchar' columns were defined as 'latin 1-default collation'. I changed them all to utf-8 (default table collation), but that did not help either.
Finally, I found the problem, though I don't really know if it is "my" problem, or ZendAMF's problem, or Adobe's problem.
It turned out that 'some' of my data had a 'bad' character in it. Specifically, I had 'copied and pasted' some data from MS Word into mySQL Workbench. Some of the data included the 'elipsis' character - you know, when you type "..." (dot dot dot) in MS Word, it replaces the three periods with a single elipsis character. Although PHP could easily query and assemble this data into a nice object array, I noticed that that character showed up (in PHP's debugger) as a 'box' character, meaning "bad character". Thus, I guess, Zend AMF and/or FlashBuilder could not 'bring over' and/or deal with this type of character. As soon as I replace the few instances of that character with three periods, everything began to work perfectly.
So... what to do about this? I thought I was through with silly encoding/decoding of data when I left JavaScript and HTML behind in moving to FlashBuilder technology. Am I really going to have to worry about this kind of thing? Or might this be a bug/deficiency somewhere in the stack?
Thanks for your help,
-David -
hi
i have a problem after installing flashBuilder 4 beta2 .
when i want to create Data/Service with BlazeDs and when i click on button finish
this error shown and I can't do anything with it .
in flashBuilder beta1 it's work perfect .
if any one in thereand know why?
please help me
ERROR: XML parse error : Error on line 1 of documen : cvc-elt.1:Cannot find declaration of element 'model'. Nested exeption:Cannot find declaration of element 'model'.
thanksHi,
Thanks for your feedback
Can you attach your sample project and provide details on the Flash Builder and BlazeDS builds you are using?
Also add your vote to http://bugs.adobe.com/jira/browse/FB-23479 a similar known issue
Thanks,
Balaji
http://balajisridhar.wordpress.com -
Problem LiveCycle Data Services with Parsley Framework
Hi All,
I have problem when using LiveCycle Data Services and Parsley framework.
Here is my Dynamic command :
public function execute(message:ServiceMsg):AsyncToken{
return dataservice.fill(...);
public function result(event:ResultEvent):void
Alert.show ("run successful");
// call another method
xyz(); // this method take a long time (about 1 minutes)
The problem here is the alert message not show until xyz() method finished. It's so odd behavior.
Anybody can explain this problem.
I'm using parsley 2.4.0
Thanks,
ndtHi All,
I have problem when using LiveCycle Data Services and Parsley framework.
Here is my Dynamic command :
public function execute(message:ServiceMsg):AsyncToken{
return dataservice.fill(...);
public function result(event:ResultEvent):void
Alert.show ("run successful");
// call another method
xyz(); // this method take a long time (about 1 minutes)
The problem here is the alert message not show until xyz() method finished. It's so odd behavior.
Anybody can explain this problem.
I'm using parsley 2.4.0
Thanks,
ndt -
Problem in Change own data service
Hi ,
I am facing problem in Change own data service. I am getting following error while opening the service.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: failed to create or init instance of model 'com.sap.xss.hr.cod.model.CodModel' in scope APPLICATION_SCOPE with instanceId 'null'
Do I need to configure this service through SPRO under Personal Mangement -> Employee Self Service ->
Server Specific Settings -> Adress Book -> Who's Who.
Am I missing any configurational step on R3 side ?
Kindly provide some solution.
Thanks in advance
AbhayHi Abhay,
You need to upgrade the EA_HR component to SP22. Alo make sure that SAP_HR and EA_HR components are in sync.
SAP Note: 1081261
Also refer thread: **Very Urgent**Do i need to upgrade SP level of EA-HR components
Regards
Deb -
Problem connecting to Data/Service outside web root
I'm new to Flash Builder (4.5). I work in an environment where developers have full access to a specified folder and subfolders on a Windows box running IIS 7 and ColdFusion 9.
So the path to the services-config.xml looks like this (server and folder names have been changed, but the structure is the same):
\\servername\flex$
Path to coldfusion root looks like this
\\servername\coldfusion9$
The developers don't have write access to those areas. What we have is
\\servername\webteam$\webcontent\app1
\\servername\webteam$\webcontent\app2
And so on
Then our server admin sets up virtual servers so that our urls look like http://app1.ourdomain.co, app2.ourdomain.com, etc.
I set up a project specifying ColdFusion as the server technology and using the above paths and everything works
I've run set up a couple Hello World tests using <mx:RemoteObject destination="ColdFusion" source="app1.flextest"></mx:RemoteObject> and everything works as expected. (No database connections, just a function that returns a string)
The problem is when I try to exploit the magic of Flash Builder and use the Connect to Data Service feature to write my queries for me : )
I select ColdFusion
In the CFC location I enter
\\servername \webteam$\webcontent\app1\cpa\flextest.cfc
Which is the same working cfc I connected to manually in my Hello World test. Flash Builder automatically populates the Service Name, Service Package, and Data Type Packages and I click next. I enter my RDS password and I then get this error:
The CFC file is invalid. Possible causes can be found by accessing: http://app1.ourdomain.com//CFIDE/componentutils/cfcexplorer.cfc?method=getCFCMetaData&name =flextest&path=%2Fwebcontent%2Fapp1%2Fflextest.cfc
Copying and pasting the url into my browser I get this error:
The value returned from the getCFCMetaData function is not of type struct.
HOWEVER, if I modify the url and remove "%2Fwebcontent%2Fapp1%" I get a response:
E:\webteam\webcontent\app1\flextest.cfcE:\ColdFusion9\wwwroot\WEB-INF\cftags\component.cfc WEB-INF.cftags.componentWEB-INF.cftags.componentcomponentcpa.flextestcpa.flextestcomponent remoteflexteststring
So I just need to tell Flash Builder to shorten the path and not add "/webcontent/app1" How?
Sorry it took so long to explain. I've been googling for days and can't find anything. I'm sure there must be other users who develop on servers outside the root path of their web server, right?
P.S. I tried mapping drives but that didn't help
Thanks,
Ron
"Embrace the senile genius"Hi ,
Check if the database server is up and running.The console will have two root nodes .R they both in green?
Try connecting and entering into the database externally.
Generally if the DB instance is not running , this error would occur.
regards,
aravindh. -
Problems with logical data service
This is related to thread 837141 (Problems creating physical data service to relational table)
I have been able to create the logical data service that uses the physical service (mentioned above).
However when I try to create a library function to update (shown below)
declare function lper:update($new as element(per:Persistance2)) as xs:boolean {*
* let $changed :=*
* for $n in $new*
* let $old := lper:read($new/Project, $ew/Property)*
* return*
* fn-bea:replace-value(fn-bea:changed-element($old), "Value", $n/Value)*
_let $return := {color:#ff0000}pper:update{color}($changed)_*
* return fn:true()*
WorkSpace Studio gives the following error (for the line underlined above, and the function in red)
*{bea-err}FUNC002: Illegal use of side-effect procedure {ld:Physical/Persistance2}update with arity 1. Side-effect procedures cannot be invoked from a side-effect free context*
Any idea why?functions, by definition, do not have side-effects. So calling something that had a side-effect (procedure) is not allowed.
You need to create a library procedure.
Your
declare function lper:update($new as element(per:Persistance2)) as xs:boolean {*
needs to be
declare procedure lper:update($new as element(per:Persistance2)) as xs:boolean {*
- mike
Edited by: mikereiche on Dec 12, 2008 5:10 PM -
Problem to use data services on different telco device
Dear Readers,
I've bought a used BlackBerry Curve 8900 of telco Starhub Limited (Singapore).
I found the trackball faulty & managed to get a replacement set from Starhub as it is
still under warranty.
The new device carry the following PIN & IMEI.
PIN : [removed personal information]
IMEI : [removed personal information]
I brought it back to my own country (Malaysia) & use it with my current Telco, Maxis.
I'm able to make/receive calls & send/receive sms.
Then I went along to register this device to use my telco (Maxis) BIS service.
I managed to register this device to my telco BIS but however I wasn't able to use
any data services at all ie. emails, browsers, applications & even wifi.
My device only shows upper case GSM network on its screen & no gprs or edge.
Throubleshoot cames & I found there are entries in the device host routing table.
Whenever I try to register the entries this error will appear.
"Registration message queued. It will be sent once data coverage is available"
I called my Telco many times on this problem & hasn't got a clue what is going on
Their BlackBerry technical assitance also spoke the same tone.
For trial & error I went to purchase a Starhub sim & activate this device with Starhub prepaid
BlackBerry service & to my surprised the data services came alive!!
The device is showing upper case GPRS on its screen & I'm able to use all the data services.
Thinking that this device PIN might be hooked to Starhub wireless network I called them up to release it.
I got a big shock when they told me that this device PIN wasn't hooked to their BIS service.
Not giving up I went back & try to register this device with my Telco (Maxis) BIS service again & this error came.
"The information you have provided is not valid for this service provider"
I got so upset & has been losing sleep as both telco are unable to tell me what is the problem.
I'm paying for a unlimited BIS plan with my Telco (Maxis) & unable to use any data services.
Went off to spend my Christmas losing sleep!!!
Can anyone out there tell me what is going on??
I would also be very grateful is someone is knowledgeable enough to guide me how to hook
this device with my Telco (Maxis) BIS & use all the data functions.
Lastly not forgetting I wished all readers a belated Christmas.Dear Readers,
I've got my BlackBerry alive & kicking!
For the benificial of all, I will post what I did here.
First of all I called up Starhub to cancel off my prepaid BlackBerry
service with them.
From the information given by Starhub I figured out that my device
is hooked on Maxis BIS but working on Starhub data network.
I've called up Maxis & ask them to release my PIN then reset my BIS account.
They told me to do a hard reset (battery & sim off) for 10 minutes.
When I turned it on after 10 minutes, to my surprised upper case GPRS appeared.
From my own analysis these few days the only clue I for the cause of this is
probably I register my BIS too early even before the data service is activated.
Other that this I can't think of any possibilty.
Welcome all to share their view here. -
Problem with the output ports of the data service !!!!! attention
Hi,
I have created a functional module x using abap programming.
The functional module x with one input and one output table.It successfully executed in abap.
Later i activated and used it in visual composer 7.1 .It worked perfectly fine.
The input port displayed was :Hollow Diamond shape
The output port displayed was: Filled Square shape.
Then i thought of changing the abap program by adding one more input and one more output table.
So i have two inputs and tow output tables.
The abap program exceuted correctly.
But when i used it in visual composer 7.1 . It didn't work.
As
The input port displayed was :Hollow Diamond shape ( correct )
The output port displayed was: Filled circle shape.( Not a correct display ).
So i couldn't drag the table output from the circled port.
But When i test the data service then it gives perfect results.
Later i created a new functional module Y with same two inputs and same two output tables. It worked fine.
Please help me . When ever i add new tables to already activated data service i face the same problem.
Kindly advice.
Regards
TekumallaHi,
Following is an image of a slide describing the port types in Visual Composer:
http://img116.imageshack.us/img116/2465/portshapesrt7.png
Which port is appearing on your service?
Would it be possible for you to send a screen shot of your service in VC?
Thanks,
Shai -
Problems creating physical data service to relational table
Good morning.
I am running AquaLogic Data Services Platform 3.2 on WebLogic 10.0 in a JRockit 1.5 Java VM on my PC (and it is not a clustered environment) under Windows XP SP3.
I am trying to create access functionality to a table in a MS SQL 2005 database, but I am having trouble with the update map functionality. I can create and test the read function with no problems. When I try to edit the return structure, it gives me the following warning message
Cannot narrow remote object ClusterableRemoteRef(-10913774038965890074S :127.0.0.1 :7102,7102,-1,-1,-1,-1,-1*:ESBDSP:AdminServer [(-10913774038965890074S :127.0.0.1 :*7102,7102,-1,-1,-1,-1,-1]:ESBDSP:AdminServer/320*)/320 to com.bea.dsp.ejb.ServerHome*
(ESBDSP is the server domain, AdminServer is the WL server name, 7102 is the port)
When I then try to alter a value and Submit, it gives me the following error message
java.lang.NullPointerException
** at com.bea.dsp.ide.xquery.views.test.QueryExecutor.invokeUpdate(QueryExecutor.java:191)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel.submitChanges(ResultPanel.java:1313)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel.access$300(ResultPanel.java:111)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel$2.run(ResultPanel.java:1203)**
** at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:369)**
** at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:313)**
** at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:479)**
** at org.eclipse.ui.internal.progress.ProgressMonitorJobsDialog.run(ProgressMonitorJobsDialog.java:265)**
** at org.eclipse.ui.internal.progress.ProgressManager.run(ProgressManager.java:1107)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel.doSubmitImpl(ResultPanel.java:1210)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel.access$200(ResultPanel.java:111)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel$1.run(ResultPanel.java:1189)**
** at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel.doSubmit(ResultPanel.java:1193)**
** at com.bea.dsp.ide.xquery.views.test.ResultPanel.widgetSelected(ResultPanel.java:2779)**
** at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:90)**
** at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)**
** at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)**
** at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)**
** at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)**
** at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)**
** at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)**
** at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)**
** at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)**
** at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:95)**
** at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)**
** at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)**
** at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)**
** at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)**
** at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)**
** at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)**
** at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)**
** at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)**
** at java.lang.reflect.Method.invoke(Method.java:585)**
** at org.eclipse.core.launcher.Main.invokeFramework(Main.java:339)**
** at org.eclipse.core.launcher.Main.basicRun(Main.java:283)**
** at org.eclipse.core.launcher.Main.run(Main.java:984)**
** at org.eclipse.core.launcher.Main.eclipse_main(Main.java:959)**
** at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)**
** at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)**
** at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)**
** at java.lang.reflect.Method.invoke(Method.java:585)**
** at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:39)**
** at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)**
** at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)**
** at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)**
** at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)**
** at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)**
** at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)**
** at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)**
I have also tried to test the update function using the following data graph
*<sdo:datagraph xmlns:sdo="commonj.sdo">*
*<changeSummary>*
* <per:Persistance sdo:ref="#/sdo:datagraph/per:Persistance" xmlns:per="http://www.example.org/Persistance">*
* <per:Value>a different value</per:Value>*
* </per:Persistance>*
* </changeSummary>*
* <per:Persistance xmlns:per="http://www.example.org/Persistance">*
* <per:ID>1</per:ID>*
* </per:Persistance>*
*</sdo:datagraph>*
The error message I receive is the following
*<Error> <ALDSP> <PW130131> <AdminServer> <ACTIVE ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1229102443940> <BEA-000000> <Test> <System error while executing the query: {ld:Physical/Persistance}updatePersistance:1*
*weblogic.xml.query.exceptions.XQuerySagaException: {bea-err}UPD003: Update failure: mixed outcome, update error dispatched (updateid=SAGA_2d641b85a027a9ba:43f1e2cd:11e2800892f:-7fd2): com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException: {bea-err}RDBW0025: esb: [UPDATE "ESBdev"."dbo"."Persistance"*
*SET "Value" = ?*
*WHERE (("ID" = ?) AND ("Value" = ?))]: [NULL, 1, a different value|http://forums.oracle.com/forums/]: Optimistic locking failure. Update count returned by database is 0, expected 1*
at com.bea.ld.server.update.recovery.SagaRecovery.process(SagaRecovery.java:102)
at com.bea.ld.server.update.recovery.DSPSagaManager.processSagaFailure(DSPSagaManager.java:219)
at weblogic.xml.query.update.recovery.SagaState$2.afterCompletion(SagaState.java:83)
at weblogic.xml.query.transaction.TransactionManager.afterCompletion(TransactionManager.java:133)
at weblogic.transaction.internal.ServerSCInfo.doAfterCompletion(ServerSCInfo.java:1032)
at weblogic.transaction.internal.ServerSCInfo.callAfterCompletions(ServerSCInfo.java:1011)
at weblogic.transaction.internal.ServerTransactionImpl.callAfterCompletions(ServerTransactionImpl.java:2946)
at weblogic.transaction.internal.ServerTransactionImpl.afterRolledBackStateHousekeeping(ServerTransactionImpl.java:2827)
at weblogic.transaction.internal.ServerTransactionImpl.setRolledBack(ServerTransactionImpl.java:2803)
at weblogic.transaction.internal.ServerTransactionImpl.globalRetryRollback(ServerTransactionImpl.java:3043)
at weblogic.transaction.internal.ServerTransactionImpl.globalRollback(ServerTransactionImpl.java:2793)
at weblogic.transaction.internal.ServerTransactionImpl.internalRollback(ServerTransactionImpl.java:397)
at weblogic.transaction.internal.ServerTransactionImpl.rollback(ServerTransactionImpl.java:375)
at weblogic.xml.query.transaction.TransactionHelper.rollback(TransactionHelper.java:102)
at weblogic.xml.query.transaction.TransactionManager.teardownOnFailure(TransactionManager.java:262)
at com.bea.ld.EJBRequestHandler.handleThrowable(EJBRequestHandler.java:810)
at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:311)
at com.bea.ld.ServerBean.executeOperationStreaming(ServerBean.java:84)
at com.bea.ld.Server_ydm4ie_EOImpl.executeOperationStreaming(Server_ydm4ie_EOImpl.java:354)
at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
*com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException: {bea-err}RDBW0025: esb: [UPDATE "ESBdev"."dbo"."Persistance"*
*SET "Value" = ?*
*WHERE (("ID" = ?) AND ("Value" = ?))]: [NULL, 1, a different value|http://forums.oracle.com/forums/]: Optimistic locking failure. Update count returned by database is 0, expected 1*
at com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException.create(RDBWrapperException.java:87)
at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:128)
at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:88)
at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:202)
at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:188)
at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLUpdateInternal.raiseUpdateFailureException(ExecuteSQLUpdateInternal.java:19)
at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLUpdateDeleteBase.executeSQL(ExecuteSQLUpdateDeleteBase.java:31)
at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.prepareAndExecuteQuery(ExecuteSQLRuntimeBase.java:170)
at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLModificationBase.prepareAndExecuteQuery(ExecuteSQLModificationBase.java:77)
at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.fetchNext(ExecuteSQLRuntimeBase.java:95)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)
at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)
at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)
at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)
at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)
at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)
at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)
at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)
at weblogic.xml.query.update.runtime.ExecuteRelational.fetchNext(ExecuteRelational.java:52)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)
at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)
at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)
at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)
at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)
at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)
at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)
at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)
at weblogic.xml.query.update.recovery.SagaInterpreter.run(SagaInterpreter.java:54)
at weblogic.xml.query.update.runtime.UVMRewritingEvaluatorImpl.run(UVMRewritingEvaluatorImpl.java:33)
at weblogic.xml.query.xdbcimpl.XQSEStatementImpl.execute(XQSEStatementImpl.java:100)
at com.bea.ld.server.XQueryInvocation.execute(XQueryInvocation.java:731)
at com.bea.ld.EJBRequestHandler.invokeQueryInternal(EJBRequestHandler.java:611)
at com.bea.ld.EJBRequestHandler.invokeOperationInternal(EJBRequestHandler.java:466)
at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:308)
at com.bea.ld.ServerBean.executeOperationStreaming(ServerBean.java:84)
at com.bea.ld.Server_ydm4ie_EOImpl.executeOperationStreaming(Server_ydm4ie_EOImpl.java:354)
at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
One of the things I don't understand is why the SQL update seems to have the parameter values reversed and why it is using the Value column for it's wehere clause i.e
*[UPDATE "ESBdev"."dbo"."Persistance"*
*SET "Value" = ?*
*WHERE (("ID" = ?) AND ("Value" = ?))]: *[NULL, 1, a different value]
when it should really be
*[UPDATE "ESBdev"."dbo"."Persistance"*
*SET "Value" = ?*
*WHERE ("ID" = ?)]: *[a different value, 1
I hope someone has an idea as to what is going on.
Edited by: MarcP on Dec 12, 2008 12:30 PMThanks Mike, I changed the graph the way you explained and the update works.
I still have a problem with the create function.
The XSD for the table looks like this
*<xs:schema targetNamespace="ld:Physical/Persistance2" xmlns:xs="http://www.w3.org/2001/XMLSchema">*
* <xs:element name="Persistance">*
*<xs:complexType>*
* <xs:sequence>*
* <xs:element name="ID" type="xs:int"/>*
* <xs:element name="Project" type="xs:string"/>*
* <xs:element name="Property" type="xs:string"/>*
* <xs:element name="Value" type="xs:string" minOccurs="0"/>*
* <xs:element name="TS" type="xs:hexBinary"/>*
* </xs:sequence>*
* </xs:complexType>*
* </xs:element>*
*</xs:schema>*
In the table, ID is an IDENTITY column, and TS is a timestamp column (therefore they should only be modified by the DB engine). How do I tell DSP to take these constraints into account when wuing the create function?
When I test it with the following,
*<per:Persistance2 xmlns:per="ld:Physical/Persistance2">*
* <ID>0</ID>*
*<Project>def</Project>*
*<Property>ghi</Property>*
*<Value>new string</Value>*
* <TS>0000000000000000</TS>*
*</per:Persistance2>*
it gives the follwiing error
*<Error> <ALDSP> <xxxxxxx> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1229106812568> <BEA-000000> <Test> <System error while executing the query: {ld:Physical/Persistance2}createPersistance2:1*
*weblogic.xml.query.exceptions.XQuerySagaException: {bea-err}UPD003: Update failure: mixed outcome, update error dispatched (updateid=SAGA_2d641b85a027a9ba:43f1e2cd:11e2800892f:-7fcd): com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException: {bea-err}RDBW0004: [esb]: [INSERT INTO "ESBdev"."dbo"."Persistance" ("ID", "Project", "Property", "Value", "TS")*
*VALUES (?, ?, ?, ?, ?)]: [0, def, ghi, new string, 0000000000000000]: Error executing SQL query: [BEA][SQLServer JDBC Driver][SQLServer]Cannot insert an explicit value into a timestamp column. Use INSERT with a column list to exclude the timestamp column, or insert a DEFAULT into the timestamp column.*
* at com.bea.ld.server.update.recovery.SagaRecovery.process(SagaRecovery.java:102)*
* at com.bea.ld.server.update.recovery.DSPSagaManager.processSagaFailure(DSPSagaManager.java:219)*
* at weblogic.xml.query.update.recovery.SagaState$2.afterCompletion(SagaState.java:83)*
* at weblogic.xml.query.transaction.TransactionManager.afterCompletion(TransactionManager.java:133)*
* at weblogic.transaction.internal.ServerSCInfo.doAfterCompletion(ServerSCInfo.java:1032)*
* at weblogic.transaction.internal.ServerSCInfo.callAfterCompletions(ServerSCInfo.java:1011)*
* at weblogic.transaction.internal.ServerTransactionImpl.callAfterCompletions(ServerTransactionImpl.java:2946)*
* at weblogic.transaction.internal.ServerTransactionImpl.afterRolledBackStateHousekeeping(ServerTransactionImpl.java:2827)*
* at weblogic.transaction.internal.ServerTransactionImpl.setRolledBack(ServerTransactionImpl.java:2803)*
* at weblogic.transaction.internal.ServerTransactionImpl.globalRetryRollback(ServerTransactionImpl.java:3043)*
* at weblogic.transaction.internal.ServerTransactionImpl.globalRollback(ServerTransactionImpl.java:2793)*
* at weblogic.transaction.internal.ServerTransactionImpl.internalRollback(ServerTransactionImpl.java:397)*
* at weblogic.transaction.internal.ServerTransactionImpl.rollback(ServerTransactionImpl.java:375)*
* at weblogic.xml.query.transaction.TransactionHelper.rollback(TransactionHelper.java:102)*
* at weblogic.xml.query.transaction.TransactionManager.teardownOnFailure(TransactionManager.java:262)*
* at com.bea.ld.EJBRequestHandler.handleThrowable(EJBRequestHandler.java:810)*
* at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:311)*
* at com.bea.ld.ServerBean.executeOperationStreaming(ServerBean.java:84)*
* at com.bea.ld.Server_ydm4ie_EOImpl.executeOperationStreaming(Server_ydm4ie_EOImpl.java:354)*
* at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)*
* at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)*
* at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)*
* at weblogic.security.service.SecurityManager.runAs(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)*
* at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)*
* at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)*
*com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException: {bea-err}RDBW0004: [esb]: [INSERT INTO "ESBdev"."dbo"."Persistance" ("ID", "Project", "Property", "Value", "TS")*
*VALUES (?, ?, ?, ?, ?)]: [0, def, ghi, new string, 0000000000000000]: Error executing SQL query: [BEA][SQLServer JDBC Driver][SQLServer]Cannot insert an explicit value into a timestamp column. Use INSERT with a column list to exclude the timestamp column, or insert a DEFAULT into the timestamp column.*
* at com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException.create(RDBWrapperException.java:87)*
* at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:128)*
* at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:176)*
* at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:163)*
* at com.bea.dsp.wrappers.rdb.runtime.DBSession.executeUpdate(DBSession.java:151)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLInsertInternal.executeSQL(ExecuteSQLInsertInternal.java:110)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.prepareAndExecuteQuery(ExecuteSQLRuntimeBase.java:170)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLModificationBase.prepareAndExecuteQuery(ExecuteSQLModificationBase.java:77)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.fetchNext(ExecuteSQLRuntimeBase.java:95)*
* at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)*
* at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)*
* at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)*
* at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)*
* at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)*
* at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)*
* at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)*
* at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)*
* at weblogic.xml.query.update.runtime.ExecuteRelational.fetchNext(ExecuteRelational.java:52)*
* at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)*
* at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)*
* at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)*
* at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)*
* at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)*
* at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)*
* at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)*
* at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)*
* at weblogic.xml.query.update.recovery.SagaInterpreter.run(SagaInterpreter.java:54)*
* at weblogic.xml.query.update.runtime.UVMRewritingEvaluatorImpl.run(UVMRewritingEvaluatorImpl.java:33)*
* at weblogic.xml.query.xdbcimpl.XQSEStatementImpl.execute(XQSEStatementImpl.java:100)*
* at com.bea.ld.server.XQueryInvocation.execute(XQueryInvocation.java:731)*
* at com.bea.ld.EJBRequestHandler.invokeQueryInternal(EJBRequestHandler.java:611)*
* at com.bea.ld.EJBRequestHandler.invokeOperationInternal(EJBRequestHandler.java:466)*
* at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:308)*
* at com.bea.ld.ServerBean.executeOperationStreaming(ServerBean.java:84)*
* at com.bea.ld.Server_ydm4ie_EOImpl.executeOperationStreaming(Server_ydm4ie_EOImpl.java:354)*
* at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)*
* at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)*
* at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)*
* at weblogic.security.service.SecurityManager.runAs(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)*
* at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)*
* at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)*
*java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Cannot insert an explicit value into a timestamp column. Use INSERT with a column list to exclude the timestamp column, or insert a DEFAULT into the timestamp column.*
* at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)*
* at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)*
* at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.commonTransitionToState(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.postImplExecute(Unknown Source)*
* at weblogic.jdbc.base.BasePreparedStatement.postImplExecute(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.commonExecute(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)*
* at weblogic.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)*
* at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:125)*
* at com.bea.dsp.wrappers.rdb.runtime.DBSession.executeUpdate(DBSession.java:144)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLInsertInternal.executeSQL(ExecuteSQLInsertInternal.java:110)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.prepareAndExecuteQuery(ExecuteSQLRuntimeBase.java:170)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLModificationBase.prepareAndExecuteQuery(ExecuteSQLModificationBase.java:77)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.fetchNext(ExecuteSQLRuntimeBase.java:95)*
* at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)*
* at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)*
* at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)*
* at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)*
* at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)*
* at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)*
* at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)*
* at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)*
* at weblogic.xml.query.update.runtime.ExecuteRelational.fetchNext(ExecuteRelational.java:52)*
* at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)*
* at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)*
* at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)*
* at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)*
* at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)*
* at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)*
* at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)*
* at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)*
* at weblogic.xml.query.update.recovery.SagaInterpreter.run(SagaInterpreter.java:54)*
* at weblogic.xml.query.update.runtime.UVMRewritingEvaluatorImpl.run(UVMRewritingEvaluatorImpl.java:33)*
* at weblogic.xml.query.xdbcimpl.XQSEStatementImpl.execute(XQSEStatementImpl.java:100)*
* at com.bea.ld.server.XQueryInvocation.execute(XQueryInvocation.java:731)*
* at com.bea.ld.EJBRequestHandler.invokeQueryInternal(EJBRequestHandler.java:611)*
* at com.bea.ld.EJBRequestHandler.invokeOperationInternal(EJBRequestHandler.java:466)*
* at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:308)*
* at com.bea.ld.ServerBean.executeOperationStreaming(ServerBean.java:84)*
* at com.bea.ld.Server_ydm4ie_EOImpl.executeOperationStreaming(Server_ydm4ie_EOImpl.java:354)*
* at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)*
* at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)*
* at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)*
* at weblogic.security.service.SecurityManager.runAs(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)*
* at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)*
* at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)*
*java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Statement(s) could not be prepared.*
* at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)*
* at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)*
* at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)*
* at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.commonTransitionToState(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.postImplExecute(Unknown Source)*
* at weblogic.jdbc.base.BasePreparedStatement.postImplExecute(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.commonExecute(Unknown Source)*
* at weblogic.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)*
* at weblogic.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)*
* at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:125)*
* at com.bea.dsp.wrappers.rdb.runtime.DBSession.executeUpdate(DBSession.java:144)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLInsertInternal.executeSQL(ExecuteSQLInsertInternal.java:110)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.prepareAndExecuteQuery(ExecuteSQLRuntimeBase.java:170)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLModificationBase.prepareAndExecuteQuery(ExecuteSQLModificationBase.java:77)*
* at com.bea.dsp.wrappers.rdb.runtime.ExecuteSQLRuntimeBase.fetchNext(ExecuteSQLRuntimeBase.java:95)*
* at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)*
* at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)*
* at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)*
* at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)*
* at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)*
* at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)*
* at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)*
* at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)*
* at weblogic.xml.query.update.runtime.ExecuteRelational.fetchNext(ExecuteRelational.java:52)*
* at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:114)*
* at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:85)*
* at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:135)*
* at weblogic.xml.query.runtime.util.TokenBuffer.addAll(TokenBuffer.java:296)*
* at weblogic.xml.query.update.runtime.Interpreter$Frame.setValueUsingTemporary(Interpreter.java:436)*
* at weblogic.xml.query.update.runtime.Interpreter.processMSet(Interpreter.java:297)*
* at weblogic.xml.query.update.runtime.Interpreter.run(Interpreter.java:125)*
* at weblogic.xml.query.update.recovery.SagaInterpreter$NestedFactory$1.run(SagaInterpreter.java:134)*
* at weblogic.xml.query.update.recovery.SagaInterpreter.run(SagaInterpreter.java:54)*
* at weblogic.xml.query.update.runtime.UVMRewritingEvaluatorImpl.run(UVMRewritingEvaluatorImpl.java:33)*
* at weblogic.xml.query.xdbcimpl.XQSEStatementImpl.execute(XQSEStatementImpl.java:100)*
* at com.bea.ld.server.XQueryInvocation.execute(XQueryInvocation.java:731)*
* at com.bea.ld.EJBRequestHandler.invokeQueryInternal(EJBRequestHandler.java:611)*
* at com.bea.ld.EJBRequestHandler.invokeOperationInternal(EJBRequestHandler.java:466)*
* at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:308)*
* at com.bea.ld.ServerBean.executeOperationStreaming(ServerBean.java:84)*
* at com.bea.ld.Server_ydm4ie_EOImpl.executeOperationStreaming(Server_ydm4ie_EOImpl.java:354)*
* at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)*
* at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)*
* at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)*
* at weblogic.security.service.SecurityManager.runAs(Unknown Source)*
* at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)*
* at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)*
* at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)* -
Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Problem with data Service - DSP
Hi,
i´m in trouble using DSP on unix machine.
DSP-config failed to start.
this is the error message:
<Jan 1, 2009 9:53:36 PM BRST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'dsp_config' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:167)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:105)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: com.bea.dsp.management.bootstrap.AppListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:289)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:262)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:161)
Truncated. see log file for complete stacktrace
>
<Jan 1, 2009 9:53:36 PM BRST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'dspconsole' due to error weblogic.application.ModuleException: .
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:292)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: com/bea/ld/metadata/Function
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2395)
at java.lang.Class.getDeclaredMethod(Class.java:1907)
at javelin.jsp.JspFunctionMapper.mapFunction(JspFunctionMapper.java:57)
at jsp_servlet._jsp._admin._application.__appglobalaudit.<clinit>(__appglobalaudit.java:133)
Truncated. see log file for complete stacktrace
below is my complete log message
JAVA Memory arguments: -Xms512m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=:/usr/bea/patch_weblogic922/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/bea/jdk150_11/lib/tools.jar:/usr/bea/weblogic92/server/lib/weblogic_sp.jar:/usr/bea/weblogic92/server/lib/weblogic.jar:/usr/bea/weblogic92/server/lib/webservices.jar:C:/bea/aldsp_3.0/lib/ld-server-core.jar::/usr/bea/weblogic92/common/eval/pointbase/lib/pbclient51.jar:/usr/bea/weblogic92/server/lib/xqrl.jar::
PATH=/usr/bea/weblogic92/server/bin:/usr/bea/jdk150_11/jre/bin:/usr/bea/jdk150_11/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_11"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
Java HotSpot(TM) Client VM (build 1.5.0_11-b03, mixed mode)
Starting WLS with line:
/usr/bea/jdk150_11/bin/java -client -Xms512m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform.home=/usr/bea/weblogic92 -Dwls.home=/usr/bea/weblogic92/server -Dwli.home=/usr/bea/weblogic92/integration -Daldsp.home=C:/bea/aldsp_3.0 -Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/usr/bea/patch_weblogic922/profiles/default/sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=/usr/bea/weblogic92/server/lib/weblogic.policy weblogic.Server
<Jan 1, 2009 9:34:33 PM BRST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/usr/bea/user_projects/domains/aldsp/lib/NETFrameworkBootstrap.jar:/usr/bea/user_projects/domains/aldsp/lib/NETFrameworkSecurity.jar:/usr/bea/user_projects/domains/aldsp/lib/NETWeblogicAuthentication.jar:/usr/bea/user_projects/domains/aldsp/lib/log4j-1.2.14.jar:/usr/bea/weblogic92/platform/lib/p13n/p13n-schemas.jar:/usr/bea/weblogic92/platform/lib/p13n/p13n_common.jar:/usr/bea/weblogic92/platform/lib/p13n/p13n_system.jar:/usr/bea/weblogic92/platform/lib/wlp/netuix_common.jar:/usr/bea/weblogic92/platform/lib/wlp/netuix_schemas.jar:/usr/bea/weblogic92/platform/lib/wlp/netuix_system.jar:/usr/bea/weblogic92/platform/lib/wlp/wsrp-common.jar>
<Jan 1, 2009 9:34:33 PM BRST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.5.0_11-b03 from Sun Microsystems Inc.>
<Jan 1, 2009 9:34:34 PM BRST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR322355 Tue Oct 09 10:46:38 PDT 2007
WebLogic Temporary Patch for CR328469 Tue Jul 17 10:32:10 PDT 2007
WebLogic Server Temporary Patch for CR330108 Fri Sep 14 11:30:56 PDT 2007
WebLogic Server Temporary Patch for CR329825 Wed Nov 07 17:02:36 PST 2007
WebLogic Server Temporary Patch for CR345256 Fri Oct 26 16:08:36 PDT 2007
WebLogic Server 9.2 MP2 Mon Jun 25 01:32:01 EDT 2007 952826 >
<Jan 1, 2009 9:45:05 PM BRST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /usr/bea/license.bea>
<Jan 1, 2009 9:45:05 PM BRST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 1, 2009 9:45:06 PM BRST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jan 1, 2009 9:45:06 PM BRST> <Notice> <Log Management> <BEA-170019> <The server log file /usr/bea/user_projects/domains/aldsp/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
log4j:WARN No appenders could be found for logger (br.com.netservicos.framework.security.weblogic.authenticaction.provider.AbstractNETPerfilAuthenticationProvider).
log4j:WARN Please initialize the log4j system properly.
<Jan 1, 2009 9:53:21 PM BRST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jan 1, 2009 9:53:25 PM BRST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jan 1, 2009 9:53:25 PM BRST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 1, 2009 9:53:36 PM BRST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'dsp_config' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:167)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:105)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: com.bea.dsp.management.bootstrap.AppListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:289)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:262)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:161)
Truncated. see log file for complete stacktrace
>
<Jan 1, 2009 9:53:36 PM BRST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'dspconsole' due to error weblogic.application.ModuleException: .
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:292)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: com/bea/ld/metadata/Function
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2395)
at java.lang.Class.getDeclaredMethod(Class.java:1907)
at javelin.jsp.JspFunctionMapper.mapFunction(JspFunctionMapper.java:57)
at jsp_servlet._jsp._admin._application.__appglobalaudit.<clinit>(__appglobalaudit.java:133)
Truncated. see log file for complete stacktrace
>
<Jan 1, 2009 9:53:36 PM BRST> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster successfully. Log messages will now be broadcasted to the domain log.>
<Jan 1, 2009 9:53:37 PM BRST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jan 1, 2009 9:53:37 PM BRST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jan 1, 2009 9:53:38 PM BRST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.230.230.18:7041 for protocols iiop, t3, ldap, http.>
<Jan 1, 2009 9:53:38 PM BRST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7041 for protocols iiop, t3, ldap, http.>
<Jan 1, 2009 9:53:38 PM BRST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "aldsp" running in Development Mode>
<Jan 1, 2009 9:53:38 PM BRST> <Warning> <Server> <BEA-002611> <Hostname "portabilidade.artit.com.br", maps to multiple IP addresses: 10.230.230.18, 127.0.0.1>
<Jan 1, 2009 9:53:38 PM BRST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.230.230.18, 127.0.0.1>
<Jan 1, 2009 9:53:38 PM BRST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jan 1, 2009 9:53:38 PM BRST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>Hi..
Your classpath isn't set properly.. (i've not used 3.0, went from 2.5 to 3.2 so can't really help on the details), you should really post ALDSP issues to the ODSI Forum (the new name for the product) at Data Service Integrator Mike Reiche will most probably solve your problem for you...
..Mark.
Maybe you are looking for
-
Numerous iPod's sharing the same Library
I have an iPod, my husband and child both just got Shuffles. Can we share the same library?
-
Password prompt disappears at screensaver
I only just started using the screensaver, I used to use the "put display to sleep" option in its place but my new monitor seems to take much longer to wake so I've switched to screensaver with password on wakeup. It works as it should for maybe 2 or
-
Macro virus Can anyone tell me how to get rid of this Macro Virus from my word documents? Every document that I have created for the last year or more has them. Including every copy of my book! Problem is that I didn't know it was a problem when I ke
-
Database calls, please suggest
Hi, I working on j2ee project. I have a requirement like this. I need to insert a data into one master and one detail table. There will one header record and multiple detail records. I should insert successfully in both the table. If any insert fails
-
Iphoto freezes on certian pictures
When viewing pictures in the same window as when organizing but using the edit funtion and pressing the arrow keys to go back and forth between photos Iphoto seems to freeze or stall on certian photos regularly. When it does so I can't go to see anot