Data Services 4.0 logon failed

Hi everybody
after a very difficult but succesfull installation of DS 4.0 server con AIX, I'm trying to connect to a Repository already created, from a DESIGNER 4.0 installed over a Windows PC, and got the following error message:
LOGON FAILED TO THE SPECIFIED SYSTEM
Check system name, port number, user name, password, authentication method, and try again.
Additional information: <Session: SDK failure>
For the DS 4.0 installation, I used a CMS of sap IPS , for which I can connect perfectly, so I believe the System Name is not the problem.
thanks for your help!

Hi Ricardo, Vineeth,
Another think you can check is that the network can resolve your CMC Server name (the one you are using in the login window.)
I do not remember the details now, but if you use a sniffer (like wireshark ) you will see that:
- The client will connect with the CMC server
- the server will answer with a packet with its server name (not IP)
- the client will try to connect with the CMC server with that name.
Make sure you have those hosts and name in the /etc/hosts file
For example what happened to me is that my test Red Hat systems were not registered in my DNS server. I assumed it was just about network-connectivity and tried to login the Designer with the CMC IP Address.
This does not work, the CMC Server name has to be resolvable. Adding that into the hosts file solved it.
Regards
Norbert

Similar Messages

IS validation rule export to Data Services invalidates datastore logon details

I am exporting an Information Steward 4.2 SP1 validation rule to Data Services 4.2 SP1; a part of the rule is a database table lookup. In the export process, IS creates a new datastore with that table I'm doing the lookup against.
The problem is that every time I re-export the rule after changing it, I have to maintain db server logon details in that generated datastore again.
Have I missed a configuration step, or it's just an error to raise through OSS?

Hi Apurva ,
Now I got Variable Id and Varibale Value i have give From Data Fields of VC .
When i click on Button Export To Excel it gives
SET_VARIABLES_STATE is Correctly placed For
VARIABLE_VALUES VARIABLE_VALUE
if give
VARIABLE_VALUES VARIABLE_VALUE instead of SET_VARIABLES_STATE it is giving No MetaData is available for VARIABLE_VALUES VARIABLE_VALUE
it throws like .
please help in this regard.
I Have given The Formuls AS Below
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=zmp_prodn_mtef_ccp_1&BI_COMMAND_1-BI_COMMAND_TYPE=VARIABLE_VALUES VARIABLE_VALUE&BI_COMMAND_1-VARIABLE_VALUES VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING="&2009&"&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=0P_FYEAR&BI_COMMAND_3-BI_COMMAND_TYPE=EXPORT&BI_COMMAND_3-EXPORT_FORMAT=XLS&BI_COMMAND_3-null="
Regards ,
venkat p

Data Services 4.1 upgrade failed

Hi Everyone,
We came across a very really strange situation when we try to upgrade our DS from 4.0 SP3 to DS 4.1 SP2.
Before the upgrade, our DSConfig.txt file is in the bin folder where DS is installed (E:\SAP BusinessObject\Data Services\bin). After the upgrade, we discovered a second DSConfig.txt file was created and saved to C:\Program Files\SAP BusinessObjects\Data Services\conf folder. How is this possible when during the upgrade we specifically pointed to E:\SAP BusinessObject location? More importantly which DSConfig.txt file should we use? Right now we can't connect to our repositories through the CMC.
TIA

Also, do not worry about the change in the directory. In the release notes it is mentioned that Linked path is changed to common directory path.
Configuration
Old location:
<LINK_DIR>/bin/DSConfig.txt
New Location:
<DS_COMMON_DIR>/conf/DSCon
fig.txt
It is weird why SAP has to change the paths. I think your upgrade went well.
Please check the release notes documents for other changes.
http://help.sap.com/businessobject/product_guides/sboDS41/en/sbo411_ds_whats_new_en.pdf
Good Luck

BO Data Services 3.2-Job fails with 'TNS:No appropriate service handler err

Hello all -
One of our DS jobs has started failing intermittently showing the following error in its log:
Data flow DataFlow_1 - OCI call <OCIServerAttach> for connection <abc> failed: <ORA-12519: TNS:no appropriate service handler found>.
This has started happening recently after we've upgraded the repository database form Oracle 10g to Oracle 11g (11.1.0.6). The source and target are also 11g.
If anyone has encountered this error before, please can you provide some pointers on how to troubleshoot/resolve this.
TIA.
Regards,
Tarun.

I have found this thread which talks nearly same about your issue.
TNS:listener could not find available handler witht matching protocol stack
The session count has to be decreased, that is the crux that comes out from this thread.
Listener some how have a count of the incoming connection request. If that number tries to go beyond process parameter value,this error is reported.Now I amnot sure that why this is happening in your case as the parameter value is already higher than the incoming connections.
And voilla!You are using XE I believe so its a bug in it. Read this thread,
Re: Intermittent ORA-12519 error on 10g XE
HTH
Aman....

SQL Service with Domain Logon fails to Auto Start but starts Manually

I have set the SQL Service Logon to a Domain account. SQL Starts manually just fine, but it fails to start on reboot.
I see these four errors in the Windows System Log:
Event 1014 (Warning), DNS Client Events:
Name resolution for the name .... timed out after none of the configured DNS servers responded.
Event 5719, NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain ... due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.
Event 1055, GroupPolicy:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Finally: Event 7000, Service Control Manager:
The SQL Server service failed to start due to the following error:
The account name is invalid or does not exist, or the password is invalid for the account name specified.
Apparently there is a delay between NETLOGON starting and "being aware" of the Domain. Apparently it still is not resolved by the time the SQL Service tries to start. However it is resolved by the time the user logs in, so SQL Service successfully
starts manually.
For various reasons I cannot make the SQL Service DelayedAuto. Is there any way to configure NETLOGON Service or DNS Client to not return from the Startup process untl the DNS is resolved?

A moderator can move it. I have no idea whether you can move it on your own. You can only delete your own post.
I would suggest that you repost manually to the Windows Server forum, so that you can change the title to something which fits better there. Maybe the text can also benefit from a review. Your original problem was that SQL Server does not start directly,
but you have already found out that you real issue is the DNS thing.
Erland Sommarskog, SQL Server MVP, [email protected]

Web services Connection_Operations.Logon call fails on Data Services 4.0

Hello,
We recently installed Data Services 4.0. We have a custom Java app which makes use of the web services interface. We had previously used Axis to generate the java class. With DS 4, it looks like the Logon method did change as it now requires the cms system and authentication. We manually updated the java classes to includes these, which has been our general approach in the past for newer releases. However DS 4 uses Axis2 and I'm not sure that this approach would work.
My problem is that the "Logon" call fails with very little details.
In viewing both the webadmin.log and WebService.log it only reports the following:
11/02/2011 18:42:17 [ SEVERE ] Logon failed. Error: null
I understand that I can control the logging detail . The Integrator Guide for DS 4.0, has the following instruction, yet there is no log4j.properties file on my system?
"To control the level of detail in the webadmin.log file, you must edit the log4j.properties file.
The properties file is located in:
LINK_DIR\ext\webserver\webapps\acta_web_admin\WEB-INF
To obtain a debug trace of events, change the log level from the default of INFO to DEBUG. For example,
log4j.rootLogger=DEBUG, A"
Any advise would be greatly appreciated
Thanks

Hello,
Unfortunately, stdout.log below doesn't show anything possibly due to some mis-configuaration of log4j.properties. In my previous post I requested info on which log4j.properties should be modified as the documentation in the DS 4.0 Integrator's guide mentions a none-existent path?
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
com.businessobjects.webpath.rebean3ws.Activator
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
null

Logon failed when connecting to XML data source over HTTP

I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
Does the URL for the HTTP data source have to conform to some specific pattern? For example, must the URL end in .xml?
Kelly

Sorry Brian,
This is a public forum, if no one can help you do have the option to purchase a support case:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you
Don

"logon failed" error when connecting to XML data source

I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
I have tried a local HTTP source as well as the same source running on Amazon EC2.
Any ideas?

Thanks for the help.
I am new to crystal reports, so I do not understand your suggestion. Both of those points look like they are related to Adobe Flash.
I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
When connecting to my source from a browser, it works fine. When using my source as a local document instead of over http it works fine. It is only when connecting to my source over http that I get the failed logon error.
Kelly

IPhone 5 cellular data services failing

ISSUE/SYMPTOMS: iPhone 5 ONLY: Cellular Data stops intermittingly, cellular data locks up without warning, Wi-Fi data connection not working on occasion, iCloud contacts, calendar and reminders not updating, Find My Phone not working, mail or Internet not available or server time-outs. No error messages though. All of these are symptoms of no data service. Problems seem to be related to iPhone 5 failing to switch between LTE and 4G or 3G data services on AT&T.
My iPhone 5 32GB AT&T version (iOS 6.0.2) along with my clients and family using iPhone 5 in the state of Oklahoma are having this issue on their AT&T iPhone 5's: no cellular data connection re-established if at anytime the LTE connection is lost or weak. As with iPhone's prior to iPhone 5, the iPhone 5 is supposed to drop down to the next tier of data service and re-connect to cellular data service when the higher speed cellular data service is not available. Apparently this is not working well on the iPhone 5.
What led me to research this LTE issue was that my iPhone was not syncing on iCloud with contacts, calendars and reminders with my other iOS devices. Other times this issue became apparent was when iMessage quit sending and receiving until I would reboot my iPhone (sometimes it would finally send the message as a “text message”). When I had these problems I also found out I was not getting any cellular data service for Internet browsing, mail, Maps, Find My iPhone, etc. This would happen without notice. In other words I would not receive any notice or error message that data service had stopped other than the fact I was not receiving any mail, iMessages, or iCloud sync updates. My only resolution was to reset or reboot my iPhone several times a day, and that would resolve it about 70% of the time.
I have talked to Apple Support on 2-3 occasions in the last week and AT&T Support twice in the last 2 days. If it is really true, only the AT&T Technical Support Advisor informed me of a nationwide issue relating to iPhone 5 and LTE: iPhone 5's are not re-connecting to 4G or 3G cellular data service once the LTE data connection is lost or dropped... the voice calls continue to work, but cellular data service fails and stays locked up without an error message until the customer reboots the iPhone.
Obviously this is very unacceptable. We depend on these data services and at minimum need to know when it stops working instead of finding out from a phone call that someone sent us an important email or something.
The AT&T representative also said that both AT&T and Apple are aware of and are working on the issue as it is a nationwide problem with iPhone 5 and LTE. The Apple Support Advisors I talked to made no mention of this "known" issue. AT&T said that it is partly AT&T responsibility because the capacity of LTE is overloaded and cellular data connections are dropping because of the lack of coverage and/or capacity. They actually refunded my data service for a whole month in apology for the inconvenience (I did not even ask for that--I just want my data service to work). But they also said that Apple has responsibility in this issue because the iPhone 5 should drop down and re-connect to the next lower tier of data service when LTE is not available or lost; instead, it is locking up somehow or it still thinks it is connected to LTE when it is actually not. I don't know how accurate these statements are, but my problem is real.
TEMPORARY WORK-AROUND / FIX FROM AT&T: Disable LTE on the iPhone 5. Or when you figure out that data is not coming to your iPhone, use Airplane Mode ON/OFF for a few seconds to force re-connection to a tower without rebooting the iPhone. You can Disable LTE on the iPhone 5 in SETTINGS/GENERAL/CELLULAR. I have disabled LTE on my iPhone 5 and have not had any of these cellular data issues since.
Disabling LTE is not acceptable either, but it is working. At least I seem not be losing connection or locking up without knowing it. In my office over the course of a day, my iPhone 5 will jump back and forth on LTE and 4G sitting in the same place. Disabling LTE has stopped this and the problem, but the iPhone 5 should switch cellular data services seemlessly just like the phone switches towers on a phone voice call seemlessly (most of the time).
WI-FI ALSO STOPS WORKING SOMETIMES AFTER THIS LTE disconnect / lock-up issue: That has been my experience along with my clients and family as well. If you use Wi-Fi a lot on your iPhone it will hide this LTE issue until you leave your Wi-Fi and get on LTE and then drop LTE (silently) and then go back to your Wi-Fi. My experience has been I have to reboot the iPhone to even get Wi-Fi working again after that happens.
I do not know if some of these comments and analysis are really accurate or valid or not... all I know for sure is since I upgraded my iPhone to the 5 along with my other family members and clients, we have had "no data" on many occasions and are continually rebooting our iPhones and looking for what is wrong.
My questions to the support community are these:
     1. Is anyone else having this issue? Or is it just me and my few? Maybe a lot of people do not realize they are not getting their data because they are on Wi-Fi most of the time or they are just rebooting and not trying to identify the real problem. AT&T said it was nationwide iPhone 5/LTE issue. Anyone else heard that from either Apple or AT&T?
     2. Is this an iPhone 5 / Apple issue or is AT&T solely responsible? Or is it both? Where do we get a solution??? Is AT&T LTE holding false connections with iPhone 5 or is the iPhone 5 failing to recognize a dropped LTE cellular data connection and then failing to attempt to re-connect with 4G or 3G?
     3. Did I miss where this issue is posted? I searched Apple Support and Communities and did not get any hits. Any updates or further insight on the issue? Any other fixes other than Disabling LTE?
      4. If this is in fact a real issue belonging in part to the iPhone 5, we need to escalate Apple’s attention to it.
Thanks in advance for your help and feedback.

Thank you fellow users and experts for your feedback and updates. Sorry about the large font on the original post... accidental via cut and paste.
I have escalated the issue with both Apple and AT&T. I actually got senior level troubleshooters from both Apple and AT&T on the phone at the same time... rare moment. Here are the key points of the update:
     1. AT&T did NOT confirm the earlier statement by another AT&T Technical Support Agent that this was an emerging nationwide issue about iPhone 5 and LTE losing data connection and not reconnecting at a lower level or re-connecting to LTE once the signal came back. So that earlier statement was not accurate as suspected by all of us. The senior tech at AT&T said he has seen this issue sporadically over the last month or so, but only with about 3-4 customers. He said it seems to be location or phone dependent (some phones not all phones).
     2. The Apple Tech was satisfied that all that could be done to eliminate my issues possibly relating to my instance of software / iOS had been accomplished except erasing my iPhone and restoring as a new phone (I have avoided this inconvenience with the argument that other family/clients with the iPhone 5 have had the same problem).
     3. AT&T went so far as to examine which towers I had been connecting to over the last week and looked at other technical data that could possibly explain the issue. I now know I have 3 towers that provide LTE within 4 miles of my home/office, one within a half mile. But so far there is nothing to explain or even properly identify the issue. AT&T offered me to take my phone to an AT&T store, try to force replicate the problem there, if so, the store would put my SIM card in a brand new iPhone 5 (just to test) and try tor replicate the problem again. If replicated on a new phone, there is a deeper issue; if resolved on a new phone, the answer is obvious. I have not taken the time to do this yet.
     4. On Friday, Jan 4, 2013 while talking and between the tech support calls (on a different phone), I was able to re-create the problem 2 separate times in my home/office by forcing my iPhone to weaken its connection to service (burying it under electronic gear) and then waiting a few minutes, then trying to browse the Internet--no data service unless I manually reset the connection. I am only able to cause the issue to occur if there is at least 15 min of idle time after a weak signal condition AND only if I don’t completely lose a connection to cellular voice service. It seems that if you go down to NO SERVICE the phone will do new a search and keep searching until reconnects to LTE or other signals correctly, but a weak connection seems to be strong enough for voice service but can sometimes cause the LTE data service to stop without reconnecting to LTE, 4G or 3G unless I manually intervene. It also seems that idle time with a weak connection is also necessary to re-create the problem manually. Since Friday, I have not been able to re-create the problem. This has been an intermittent problem, so who knows.
FYI, I have never had this problem with my new iPad (also on AT&T LTE) that has been with me when the iPhone fails to have data service, but my iPad is never in my pocket or other places with perhaps less signal.
Again, if you are connected to Wi-Fi on your iPhone 5 most of the time, you may never notice this issue if you are even having it.
So far no progress on the real issue or resolution, but both Apple and AT&T have put forth very admirable effort.
If you or others you know are having this issue, please take the time to post a reply to this issue. Thank you.

Wcf Data Service fails when more than 8properties in the 'select=' portion

Hi:
I am using WCF Data Service and Oracle
EF Provider is ODAC11.2 Release 4
Wcf Data Service fails when more than 8 properties are specified in the 'select=' portion of the URI
here is my code
var q = from c in this.ctx.SALESORDER_ITEM
select new
c.SORDERDETAILID,
c.IID,c.DMFLAG,c.OWNERID,c.SKUID,c.SKU_ID,c.TRADENO,c.SOURCEID,c.SORDERID
excetion:
InvalidOperationException: An error occurred for this query during batch execution. See the inner exception for details
The inner exception is null, but the DataServiceClientException states: Value cannot be null Parameter name: value
the exception is thrown in base.OnStartProcessingRequest(args) method (overridden).
Here is the call stack as well:
at System.Data.Services.WebUtil.CheckArgumentNull[T](T value, String parameterName)
at System.Data.Services.Internal.ProjectedWrapper.set_PropertyNameList(String value)
at lambda_method(Closure , Shaper )
at System.Data.Common.Internal.Materialization.Coordinator`1.ReadNextElement(Shaper shaper)
at System.Data.Common.Internal.Materialization.Shaper`1.SimpleEnumerator.MoveNext()
at System.Data.Services.Internal.ProjectedWrapper.EnumeratorWrapper.MoveNext()
at System.Data.Services.DataService`1.SerializeResponseBody(RequestDescription description, IDataService dataService)
at System.Data.Services.DataService`1.HandleNonBatchRequest(RequestDescription description)
at System.Data.Services.DataService`1.HandleRequest()
Is there a max number of properties in $select statement
I think may be it is oracle provider's problem ,but i don't konw how to debug it Can anyone help me
Any help is greatly appreciated

I believe the null/empty string issue is unrelated to the 8 column issue, at least for ODP.NET. For example, let's take the original query in the OBE:
http://.../yoursvcfile.svc/EMPLOYEES?$select=EMPLOYEE_ID,FIRST_NAME,LAST_NAME,SALARY,DEPARTMENT_ID,DEPARTMENT,EMAIL,PHONE_NUMBER,MANAGER_ID
Let's make all the columns selected not nullable. You can do this with the Oracle Dev Tools. Specifically, PHONE_NUMBER and FIRST_NAME are the only nullable fields. I make them non-nullable and re-run the query and the same error occurs. Thus, these values should never be made null. Moreover, in all 107 rows, none of these row values consist of empty strings anyway.
Looking into the problem further, WCF DS is calling methods in the System.Data.Services.Internal namespace.
http://msdn.microsoft.com/en-us/library/system.data.services.internal.aspx
Specifically, we see your issue when the ProjectedWrapperMany method is called. You will notice that there is ProjectedWrapper0, ProjectedWrapper1...ProjectedWrapper8 methods also present in the same namespace. As soon as the number of columns exceeds 8, ProjectedWrapperMany is called and we see the error. We're going to ask MS to help analyze the issue since this is an .NET-internal method being called.

Data Services 12.2.3.0 BODI-1112015 Adapter metadata import failed

Hi Experts,
I am using Data Services 12.2.3.0.
I have an issue in importing functions through 'Adapter' type datastore into Data Services. I can open the datastore and see the list of functions available, but when I try to import them, I get the error BODI-1112015 Adapter metadata import failed.
The setup and the errors are as below.
The adapter datastore is setup as below.
I built a new keystore called clientkeystore.jks in the ..\bin.Then created the .CSR file, and then imported the signed chained (I believe it's chained certificate) certificate of the server hosting the wsdl into the keystore.
Thanks for the post http://scn.sap.com/thread/1589052 . After changing the metadata character set to utf-8, I can see a list of functions when I open this New_Datastore in Data Services. It proves that the setup for the datastore has no problem parsing the wsdl file and give me the list of functions in it.
However, the error appears when I try to import them.
Error is:
Adapter metadata import failed. Error message: (BODI-1112015) Error parsing the <TheFunctionToBeImported> included in the XML sent by the adapter to represet a function <Error importing XML Schema from file <adapter_schema_in.xsd>:<XML parser failed: Error <Schema Representation Constraint: Namespace 'http://result.form.v81.api.keysurvey.com' is referenced without <import> declaration> at line <13>, char <46> in < < xsd:schema xmln:xsd=http://www.w3.org/2001/XMLSchema" xmln:tns="http://result.form.v81.api.keystore.com" xmlns:diws="http://businessobjects.com/diwebservice" targetnamespace="http://www.businessobjects.com/diwebservice"><xsd:import namespace='http://v81.api.keysurvey.com' schemaLocation='C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice\FormResultManagemenetgetRespondentsgetRespondents0.xsd'/>
<xsd: import namespace='http://result.form.v81.api.keysurvey.com' schemaLocation='C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice\FormResultManagemenetgetRespondentsgetRespondents2.xsd'/> ........
When comparing it with the wsdl file(as below), it is worth nothing that the schemaLocation is changed to a local directory under C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice while it was not the case in wsdl. The schemaLocation is on the server.
I am wondering if the redirection from the server specified in the wsdl file to the local directory has caused this error. The error 'namespace is reference without <import>' is apparently wrong as the <import> is just there.
Or there is any other reason behind this.
I appreciate any adivce or question from you!

I have reached the exact same error as this post http://scn.sap.com/thread/3190403
The error is
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_builder.c(876) Specifyingservices and modules directories using axis2.xml but path of the library directory is not present
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_builder.c(261) Processing transport senders failed, unable to continue
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\dep_engine.c(939) Populating Axis2 Configuration failed
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_init.c(195) Loading deployment engine failed for client repository C:\Program Files (x86)\SAP BusinessObjects\Data Services\ext\webservice-c\axis2.xml
As it is identified as an version problem, this issue is not going to be investigated any further.
As an alternative, can try to use Oracle 11g SOAP_API.sql.

TREX 7.1 IIS logon failed http service start failed

TREX 7.1 Rev 36 wurde in folgender Systemumgebung installiert:
Windows Server 2008 R2 Standard (64 Bit)
Java: Sun JSE 1.4.2 64bit (1.4.2_25 Rev b02)
Umgebungsvariablen JAVA_HOME=C:j2sdk1.4.2_25-x64 gesetzt bzw. PATH ergänzt
um C:j2sdk1.4.2_25-x64jre in
IIS 7.5 wurde installiert
Problem: Beim Schritt "Configuring the TREX Web Server" (Seite 48f.) bleibt der Service "httpserver" als einziger im roten Zustand.
aptrex01 31005 httpserver - http.//aptrex01:31005/TREXHttpServer/TrexlsapiExt.dll
Ein Restart-Versuch ergibt:
"Restarting the http service finished:
TREXIISCtrl.exe -ul -iisrestart /tns:aptrex01:31001
IIS logon failed. Wrong sidadm password used by TREXIISCtrl.exe
or no sidadm password stored in TREXIISCtrl.exe.
HttpServer could not be restarted."
Die SAP-Hinweise 1423381, 1008299 und 1029783 sind bekannt.
1423381: IIS 6.0-Kompatibilität wurde nachinstalliert
1008299: der IIS wurde bislang noch NICHT in den 32-Bit-Modus gesetzt
1029783: die beiden Dateien msvcp71.dll und msvcr71.dll waren zwar nicht im angegebenen exe-Verzeichnis zu finden, wurden aber von C:TEMPClt-InstSystem32 (Datum 12.01.2010) in die aufgeführten Verzeichnisse kopiert.
Der Blog /people/bettina.knauss/blog/2006/12/11/trex-admin-tool--troubleshooting-if-httpservice-is-not-running ist bereits bekannt (Bettina Knauss), ebenso dieser SDN Thread:
(CRM2007 to Trex server issue).
Mit freundlichen Grüßen
Rüdiger Höckel
apetito AG
SAP Basis

Hi Mark,
I know the SAP Note 1483929. When I execute the command it breaks.
\usr\sap\TXD\TRX03\exe>trexiisctrl -ul -storeprops /ap:<PASSWORD> /sp:<PASSWORD> /tns:txdci:30305
Environment variable DIR_EXECUTABLE not set, using SAP_RETRIEVAL_PATH/.. as fallback
SAPLOCALHOST='txdci'
SAPSYSTEMNAME='TXD'
SAPSYSTEM='03'
SAP_RETRIEVAL_PATH: 'I:\usr\sap\TXD\TRX03\txdci\'
TARGET: 'I:\usr\sap\TXD\TRX03\txdci\'
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Kind regards,
Roland

Data services job failes while insert data into SQL server from Linux

SAP data services (data quality) server is running on LInux server and Windows. Data services jobs which uses the ODBC driver to connect to SQL server is failing after selecting few thousand records with following reason as per data services log on Linux server. We can run the same data services job from Windows server, the only difference here is it is using SQL server drivers provided by microsoft. So the possible errors provided below, out of which #1 and #4 may not be the reason of job failure. DBA checked on other errors and confirmed that transaction log size is unlimited and system has space.
Why the same job runs from Windows server and fails from Linux ? It is because the ODBC drivers from windows and Linux works in different way? OR there is conflict in the data services job with ODBC driver.
===== Error Log ===================
8/25/2009 11:51:51 AM Execution of <Regular Load Operations> for target <DQ_PARSE_INFO> failed. Possible causes: (1) Error in the SQL syntax;
(2)6902 3954215840 RUN-051005 8/25/2009 11:51:51 AM Database connection is broken; (3) Database related errors such as transaction log is full, etc.; (4) The user defined in the
6902 3954215840 RUN-051005 8/25/2009 11:51:51 AM datastore has insufficient privileges to execute the SQL. If the error is for preload or postload operation, or if it is for
===== Error Log ===================

this is another method
http://www.mssqltips.com/sqlservertip/2484/import-data-from-microsoft-access-to-sql-server/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Logon failed error when pushing data from dataset

Hi,
I am trying to embed a Crystal report in an ASP.NET 2005 web page, but every time I run the page I get the following error:
Logon failed. Details: crdb_adoplus : Object reference not set to an instance of an object. Error in File C:\DOCUME1\PB_IT_AN\ASPNET\LOCALS1\Temp\DIPSummary {DC347D6B-44F8-441F-8940-4A16ACB54E76}.rpt: Unable to connect: incorrect log on parameters.
I have set up the report using a simple xsd schema in my project which corresponds to the data being extracted from the database (SQL Server 2000) elsewhere within the project. This is being populated into a datatable (dtPCDipSummary) which is then put in a dataset and used as the data source for the report. My code is as follows:
                DSDipSummary.Tables.Add(dtPCDipSummary);
                oRpt.Load(Server.MapPath("DIPSummary.rpt"));
                oRpt.SetDataSource(DSDipSummary);
                crvDIPSummary.ReportSource = oRpt;
                crvDIPSummary.DataBind();
I don't understand what the report is trying to log on to, as the only thing it points to is the schema definition within the project - no reference to an external database.
I have scanned through numerous references to the same error on the internet and tried everything I thought might help but without success.
Please can someone point me in the right direction to get a solution to this?

I deleted the report completely and rebuilt it from scratch, and also added names for the data table and data set generated within the project and finally, success!
Jason, thanks so much for your help which got me moving on this again.

Tunneling failed in Data Service 2.5.1

We created a set of application which all use Data Services
RTMP using port 2038. In the services-config.xml we set up in the
my-rtmp channel definition to use rtmpt as the protocol. All
applications are compiled with this service-config.xml.
For most users it is working fine, however for some of our
corporate user, behind restrictive firewalls, a connection to the
data services can not be made. The application throws a generic
send failed message.
Since we are using the rtmpt protocol, what can we do to make
sure our corporate users are able to use our applications?
Thanks,
-Rogier

It seemed the problem was fixed. However, as we set rtmpt as
the only channel, our other users were experiencing a big drop off
in performance due to the tunneling.
I read a very good blog entry:
http://www.infoaccelerator.net/blog/post.cfm/setting-up-rtmpt-failover-on-lcds
where Andrew talks about using rtmpt as failover for those
users that cannot use rtmp.
We implemented the structure he described:
- channel definition for rtmp in services-config.xml
- channel definition for rtmpt in services-config.xml
- channel definition for polling-amf in services-config.xml
- define both channels as default channels in
data-management-config.xml in the order rtmp, rtmpt, polling-amf
Everybody was able to use the data services..

Data Services 4.0 logon failed

Similar Messages

Maybe you are looking for