Data Services Designer doesn't work in Windows 7 64bits

Hi Experts,
I have installed the DataServices Designer 12.2.0.0 in my Windows 7 Premium 64 bits. When I starts the DS Designer nothing happens, but in the task manager of Windows 7, I can look for the process *AL_Designer.exe *32 )running
Any idea ?
Regards,
Rodrigo Silveira

Rodrigo,
Check to see if your video vard is configured for dual monitors. If it is, and you only have one monitor, the Designer window may be on the dual display. This URL might also be helpful:
Link: http://malektips.com/windows-7-move-off-screen-hidden-window-application.html
PK

Similar Messages

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

ISight just doesn't work on Windows 7 64Bits

I'm a new MacBook Pro user for a few days. I was attracted by the design of MacBook and knew I could install Windows on it, so after shopping for some time, I decided to get MBP 13". I got Windows 7 64Bits installed yesterdat; all the drivers are installed as well. I went to Control Panel\System, and I saw "Built-in iSight" listed. However, the camera device just doesn't work. In Control Panel, I didn't see the "Imaging and Scanning" icon. I tried to uninstall and reinstall the driver and no luck. I'm already using the latest Boot Camp, and I just don't know what to do now. I really need the camera working. Can someone help?

Does this help? http://discussions.apple.com/message.jspa?messageID=11953256#11953256
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why Itunes doesn't work in Windows 7 64bit

can anyone tell how to download it Itunes 11

dyou have all win patches installed?
I have Win7 (legally) for 2 month now, and I had also some probs... but I used to have IT 8.2, and had problems updating to 9.0.
Try to get IT 8.2 Setup anywhere, install it, and then update to 9.0... that helped for me :-D

Data Services Designer 14 - Large Log files

Hello,
we're running several jobs with the Data Services Designer 14, all works fine.
But today a problem occur:
The Data Designer on a client produces after finishing a big job a very large log file in the Data Services Designer folder with 8 GB.
Is it possible to delete these log files automatically or restrict the maximum size of the created log files in the designer?
What's the best way?
Thanks!

You can set to automatically delete the log files based on number of days.
I have done this in XI 3.2, but as per the document, this is how it can be done in DS 14.0.
In DS 14.0, this is handled in CMC.
1. Log into the Central Management Console (CMC) as a user with administrative rights to the Data Services application.
2. Go to the u201CApplicationsu201D management area of the CMC. The u201CApplicationsu201D dialog box appears.
3. Right-click the Data Services application and select Settings. The u201CSettingsu201D dialog box appears.
4. In the Job Server Log Retention Period box, enter the number of days that you want to retain the following:
u2022 Historical batch job error, trace, and monitor logs
u2022 Current service provider trace and error logs
u2022 Current and historical Access Server logs
The software deletes all log files beyond this period. For example:
u2022 If you enter 1, then the software displays the logs for today only. After 12:00 AM, these logs clear and the software begins saving logs for the next day.
u2022 If you enter 0, then no logs are maintained.
u2022 If you enter -1, then no logs are deleted.
Regards,
Suneer.

The ADF Mobile preview pane doesn't work under Windows 8.

The ADF Mobile preview pane doesn't work under Windows 8 64bit even I use Jdeveloper version 11.1.2.4.0,but I use windows 7 64bit or windows xp works fine.
How to fix it, please.
Thanks !

Hi,
I installed JDeveloper 11.1.2.4 on my Windows 8 machine and then the ADF Mobile extension. I can open the previewer for ADF Mobile. So there is no problem with this on Windows 8. I used the generic installation, which is that I installed the JDK and then run the Java -jar command for the JDeveloper install.
Frank

Export PDF converts filled PDF form without the data - Turns filled PDF form onto blank Word doc. Is there a solution to this or did Adobe just sell me a service that doesn't work?

Export PDF converts filled PDF form without the data - Turns filled PDF form onto blank Word doc. Is there a solution to this or did Adobe just sell me a service that doesn't work?

ExportPDF is not for forms. In general, converting forms to Word is a really, really bad idea which can even cause legal problems. Work with the form as a PDF. Acrobat (not Reader) can export form data as simple text for example.

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Data Services Designer Issue with Job Server

I am on Business Objects Edge Pro using the Data Services Designer. When I try execute a job I get "The job server you have selected is not working." In addition to that when I try to make any personal change to the environment I get a BODI-1260016 error. Finally when you go to the help and about they show both the Job Engine and Job Server not responding.
I have opened up my CMC and it shows all servers enabled and functioning. I do not know where to go from here.
Thanks
Cassidy

Voila. I know I am a bit late to the conversation, but here was my solution. I was running Designer on my local machine. We also have Designer on the server. So I decided to remote to the server and compare settings. When the server desktop came up, good old Windows was there, announcing that BODS had changed since the last time it was run, and would I like to allow it to run (Y/N/Cancel)? Thanks, Windows. I said Yes, then went back to my local workstation, tried again to run a job, and no problem.
This has happened with other software services (scripted ftp for example) that run on servers. Seems it can happen after a Microsoft Tuesday, or after software is upgraded. Always remember to log on to the server and clear any security dialogs that are preventing your service from running. Not really a BO solution, but it was my solution. YMMV.

Data Services Designer - Error when pulling large source tables

Hi all,
I have been trying yo load data from an SAP table - BSIS into MS SQL server database using BO Data Services Designer XI 3.2. It is a simple data flow with one souce table (BSIS).
When we execute the job, it says what is mentioned below:
*"Process to execute Dataflow is started"*
*"Cache statistics determined that DataFlow uses <0> caches with a total use of <0> bytes. This is less than the virtual memory <1609564160> bytes available for caches. Statistics is switching the cache type to IN MEMORY."*
*"Dataflow using IN MEMORY cache."
It stays there for a while and says "Dataflow terminated due to error"
In the error window, it says DF received a bad system message.
Does not specify the error... It asks to contact the customer support with error logs, ATL files and DDL scripts.
Can anyone help me out???
Thank you and regards,
Suneer.

Hi,
please do not post the short dump in this forum.
I blieve the system will read from table dt_iobj_dest.
The problem is that 0FISCPER, 0FISCYEAR and 0FISCVARNT are not registered.
You can register the infoobject 0FISCYEAR and 0FISCVARNT
retroactively:
1) se24, CL_UG_BW_FIELD_MAPPING
2) F8 -> test environment
3) GET_INSTANCE, do not use IT_FIELD_RESTRICT
4) IF_UG_BW_MAPPING_SERVICES
5) REGISTER_INFO_OBJECT
6) specify I_RFCDEST
            I_INFOOBJECT
   attention: I_RFCDEST is case-sensitive
kind reg.
Michael
ps. please do not forget to assign points.

Backlight doesn`t work on Windows Seven~ Please help!!

I have Macbook Pro Z0G5 model
My backlight doesn`t work on Windows Seven!
Does anyone know how to turn it on??

It is working properly now. it was a problem with classpath
settings. Ensured that the classpath is according to what is
there in the install docs + sp11 readme. It is all fine.
Regards,
Bala
"Suresh" <[email protected]> wrote in message news:<3cc54106$[email protected]>...
Make sure that u have the latest service pack jar file ( for example weblogic510sp11.jar
for service pack 11 - use service pack 8 or later for better NTREALM configuration
) ahead of the weblogicaux.jar in your classpath. This should solve the problem.
Suresh.
"YP Wang" <[email protected]> wrote:
OS: Windows 2000
WLS: 5.1 with sp 7
I run java weblogic.security.ntrealm.NTRealm username password and I got
exception
like:
----->NTDelegate.useAltDomain is NULL!
Exception in thread "main" java.lang.NoSuchFieldError: useAltDomain
at weblogic.security.ntrealm.NTDelegate.initFields(Native Method)
at weblogic.security.ntrealm.NTDelegate.loadlib(NTDelegate.java:132)
at weblogic.security.ntrealm.NTDelegate.<init>(NTDelegate.java:56)
at weblogic.security.ntrealm.NTRealm.<init>(NTRealm.java:39)
at weblogic.security.ntrealm.NTRealm.main(NTRealm.java, Compiled
Code)
Does any one know what's wrong with it? Thanks.
YP

Data Services Designer - Very Slow on VPN

Hello,
Any idea why Data Services Designer is very slow and many a times goes into Not Responding state. I'm using this client tool to connect to the Data Services Repository + Servers via VPN.
It takes few minutes to load the jobs or to save the changes. Some times hangs.
Wanted to know if anyone is facing similar issues, and any workaround/setup changes to eliminate these delays...
Regards,
Madan
Edited by: Madan Mohan Reddy Zollu on Mar 12, 2010 9:24 AM

Data Services Designer is communicating with the repo (to store/retrieve objects) and the jobserver (to execute jobs and get status/log files) so if there is a slow network connection, response time in the Designer could become problematic.
One way to solve this is use CITRIX or terminal services to have your Designer close to the database and only screens are send over the slow connection. In the Windows installation guide there is a chapter that documents how to setupDesigner in a (multi-user) Citrix environment.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
tt2

Question - new to BO Data Services Designer - how to automatically transform varchar column data to upper(varchar) across all columns in a table?

Hello -
New user to BO Data Services Designer. Company is using Data Services Version 12.2.
I have many tables that all need the same transformation- converting varchars fields to upper(varchar) fields
Example:
I have a table called Items. It has 40 columns, 25 of which are of type varchar.
What I have been doing is ....
I make the Item table as the source table then create a Query transform that is then attached to a new target table called - ITEMS_Production.
I can manually drag and drop columns from the source table to the query and then in the mapping area I can manually type in upper(table_name.column_name) or select the upper function and then select the table.column name from the function drop down list.
Obviously, I want to do this quicker as I have to do this for lots and lots of tables.
How can set up Data Services so that I can drag and drop an upper transform quickly and easily or automate this process.
I also know Python-Java so am happy to script something if need be.
the logic would be something like -
if there is a column with a type varchar, add the upper() transformation to column. Go to next column.
Excited to be using this new tool-
Thanks in advance.
Ray

Use the DS Workbench.

Data Services Designer doesn't work in Windows 7 64bits

Similar Messages

Maybe you are looking for