Data Services through WiFi have suddenly stopped working

Hi there,
I own a Blackberry Curve 8900 on o2 UK. I have a data plan and everything was working fine. As I live in a rural part of England where some areas are black spots for signal, I realised that I can use all data services through WiFi.
I am currently in a region of Afghanistan where there is no GPRS/EDGE coverage, my phone only shows as GSM, however untill last week I was still able to use BB Messenger and email through a WiFi connection.
If I open my browser on the phone, I can still use it to access websites, however when I try to send an email or PIN, I straight away get the red clock symbol. It does not even seem to attempt to send, as the red clock is almost simultaneous with pressing send.
The only event that coincides with this problem is the installation of OPEN DNS on the WiFi network I am connecting to. Is it possible that OPEN DNS could be blocking 'data service' or 'blackberry internet service', if I am right in saying that these features use BIS even through WiFi? What would I need to tell my network administrator to look for?
Any help would be much appreciated,
Kind Regards

Okay after some research I have found that;
- The Host Routing Table should have entries in it,
-Mine doesn't.
It certainly used to have them as I remember checking it, I'm thinking this could have been wiped by changing the SIM cards. Therefore I'm going to need to re register next time I'm an area covered by GPRS/EDGE.
So my next question: Is there any way of registering the Host Routing Table through WiFi or manually adding data? I have registered before and I do have the BB data plan.
Thanks again

Similar Messages

  • Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

    My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

    The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

  • My question mark and forward slash key have suddenly stopped working.  have I pressed something to make this happen.  Any ideas.

    My question mark and forward slash key have suddenly stopped working.  Have I pressed something I shouldn't have.  Any ideas what to do.

    judith147 wrote:
    My question mark and forward slash key have suddenly stopped working. 
    If they do nothing at all, double check system preferences/speech and make sure they have not somehow gotten set as the trigger for Text to speech or speech recognition, etc.
    Also try an external keyboard.  If it works ok, then your internal keyboard is probably damaged and needs repair or replacement.

  • Some commands have suddenly stopped working, e.g.; move to, open with now give no list of options

    in pnotoshsop CC some commands have suddenly stopped working e.g.; move to, open with provide no list of  options

    If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
    Try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Some third Party Applications have suddenly stopped working

    My Onyx, ClamXav. Tiger Cache Cleaner and Speed Download have suddenly stopped opening when I click the application. Eudora, Firefox, NeoOffice, Quicken and MT Newswatcher still function normally. I can't download anything, probably because Speed Download is set to perform that function but isn't working.
    The only other unusual sign is that the Sleep function is also taking 10-15 sections to kick in when I click it from the pull down menu. Any idea what's happening?
    MacBook 13" White 2.0 GHz   Mac OS X (10.4.10)   512 memory cache

    John, thanks for that info.
    1. Does Safari actually crash?
    If so, could you copy & paste the most recent report
    for us here?
    As indicated, I deleted Safari 3 without using the uninstall app; as a result even Safari 2 is not in my apps folder. And in fact when attempting to deal with this problem I found and deleted everything on the computer with "Safari" in the title. And don't ask me to reinstall Safari 2 from the Options package on my install disk; I've already tried that and the Options package won't open.
    2. Could you check your System Preferences, and tell
    us what is listed in the login items? (Blue
    Apple>Sys Prefs>Accounts>YourAccount>Login Items.
    "iTunes Helper," Kind: "Application;" three listings for "Expander Daemon," Kind: "Unknown;" one listing for "Expander Daemon," Kind: "Application;" AdobeResourceSynchronizer, Kind: "Application;" "CrossOver CD Helper," Kind: "Unknown;" "MultiAlarm Check," Kind: "Unknown."
    3. Do a "Get Info" on the Safari app in your
    Applications Folder.
    What version does it say it is? (Select Icon, press
    the Apple key along with the letter "i" key).
    As noted above.
    MacBook 13" White 2.0 GHz Mac OS X (10.4.10) 512 memory cache
    MacBook 13" White 2.0 GHz Mac OS X (10.4.10) 512 memory cache

  • TS1381 Numbers one through nine have randomly stopped working on my built in Keyboard. Does anyone know why? I have a MacBook Air.

    I was on a website and I had to type in a quantitiy in numbers when I realized that one through nine on my built in keyboards on my macbook stopped working. Shift doesn't change anything. I was switching back and forth between a word document and the website. When I turn on my keyboard viewer and press down on the number it does not become highlighted in the viewer. I'm clueless. Does anyone know what to do to get my numbers working again?

    BDAqua
    I accidentally hit the numlock key  recently on my Pismo - this disables the number keys 1 2 3 4 5 & 6 is actually 'clear' and switches the
    7 8 9
    u i o
      j k l
       m
    to
    7 8 9
    4 5 6
      1 2 3
       0
    Now I know that the MacBook Air and many more Macs have discontinued the 'numlock' KEY and therefore its function, BUT it got me to thinking, so I did a little Google research...
    It seems that quite a few Apps have functions associated with the 'numeric keypad' that can be achieved on laptops that have none by engaging the numlock.
    There was a workaround for MBAir (et al) - plug-in a USBkeyboard that DOES have numlock and voila! - the COMPUTER & OS function fine.
    I wonder what would happen if one were to plug in a USB keyboard > engage the numlock > press keys on the laptop keyboard? Both would work, I think.
    If so, what would happen if one were to leave the numlock engaged and UNPLUG the USB keyboard? Would the computer know to disengage the numlock function? If not, would it require replugging the USB to disengage? Would restarting reset it? If this function is happening in software (it is in fact as there are many Apps that can assign functions to keys and so does OS X in Tiger's Keyboard & Mouse PrefPane > Keyboard Shortcut TAB - tons of 'em!!)
    Could the  Original Problem here be in software? Some App running that hijacked the keyboard while active in the browser? He did say it went away!! and would look into it when returned from trip.
    my brain hurts (Monty Python)
    ÇÇÇ

  • HT1430 My mail service with Yahoo just suddenly stopped working.  Can't access Yahoo.  Restart did not help.  Help

    My Yahoo mail service stopped working on my Iphone.  Works fine from my PC.  Help  Did restart but no help.

    Hello Bad Don,
    Thank you for using Apple Support Communities!
    I would recommend performing the troubleshooting steps in this article named iOS: Unable to send or receive email found here http://support.apple.com/kb/ts3899
    Try an alternative Internet connection.
    If your email is provided by your Internet provider, try connecting from the home network.
    If your iOS device has an active cellular data plan, try to disable Wi-Fi:  Tap Settings > Wi-Fi and turn off Wi-Fi.
    If not, try a different Wi-Fi network.
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
    If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
    If none of that resolves the issue, I would backup and restore the device with iTunes.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the best,
    Sterling

  • Lots of Apps have suddenly stopped working...Help!

    I've got an iBook G4 running 10.5.8 and for some reason a couple of weeks ago Safari stopped working. It would crash on launch every time. Then other apps started to follow, crashing on launch. I decided to update to 10.5.8 and Safari worked, but other apps still no longer work, like Firefox and 1Password and a bunch more. I've tried uninstalling some of the apps and reinstalling them, but I still have the same issues. I've tried running Onyx and fixing permissions, but still no dice. Also, every once in a while the computer won't come out of sleep. The computer will turn on, but the screen stays black and every now and then I get the blue screen of death for several hours. It feels like the iBook is on the way out. Any thoughts on how to save it?

    I have a similar problem. And I really don't know how it happened. All was fine, I turned it off and when I switched it on next morning nothing worked.
    Basically all my applications (apart from a dictionary, a music program and my system preferences) just bounce once and don't open. also, my desktop is empty, which it wasn't before the problem started. Even the finder won't open. But everything still seems to be on the hard disk because the music is still there and I can change the desktop picture choosing from my picture folders.
    I tried to fix it with the instructions from the link you posted but didn't work. Thought it could be "Disk, permission, or cache corruption" or "Corrupted preferences other than those of the affected applications". Problem is that I can't run SMART diagnostics because I can't open the disc utility when putting in mac osx install disc. Also, I can't download anything to fix it because none of my browsers work.
    Any ideas?

  • Can someone help with why these have suddenly stopped working - no file changes

    MSN MoneyCentral Investor Stock Quotes
    MSN MoneyCentral Investor Major Indicies
    MSN MoneyCentral Investor Currency Rates
    (the Microsoft Web Query Files -IQY
    Stopped working on Dec 22,  2014

    Hi Wayne,
    PG team is working on this issue now, we would try our best to fix it in a short time.
    Thanks for your patience and understanding.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • IPhones WiFi Connection Suddenly Stopped Working

    Woke up this morning and my iPhone is failing to connect to my home WiFi network (Uverse through a 2WIRE 3800HGV-B router, WPA Personal security). My Macbook and my wife's iPhone are still connecting without any problems, so I know the network is good. I've tried reentering the password; rebooting the iPhone; and turning WiFi off, forgetting the network and building the connection anew, but no dice. I also made sure the iPhone's software was up to date (it was). Haven't had a chance to try any other WiFi networks yet.
    Any ideas?
    Thanks,
    Nate

    Tried #1; didn't work. As for #2, since I synced after this began, wouldn't that just restore that last backup and thus be ineffective? And for #3, what's the best way to do so and then restore everything I want to keep (accounts, pics, etc)? (I don't want to try any of these more drastic measures before having a chance to see if the iPhone connects to other known networks, hopefully Monday or Tuesday I'll be near some).
    As for the router/MAC thing, this iPhone has worked on this network without problem for five months, since I first set it up. There have been no changes to any part of the configuration.
    Thanks,
    Nate

  • IWeb sites have suddenly stopped working, can't "visit", won't display.

    Hello. I have two sites up, both published to "Mobile Me". One has third party domain forwarding. Both worked perfectly, including the forwarding, until Sunday morning when: http://www.acarguy.net/arnaldoburgosstudios/Home.html (which is masked as www.arnaldoburgosstudios.com) stopped loading and I went straight to the iWeb error page. If I loaded the unmasked url, (visited from iWeb) I could see the site and it worked until today. My site forwarding service said everything on their end is ok. They get the same error messages using Firefox as well. I re-published the entire site and now neither site will load and I get a blank page @ www.arnaldoburgosstudios.com and I can't "visit" either site from iWeb at all. My car blog, which was totally unaffected before today, no longer works either and both sites display one of these error messages:
    Not Found
    or
    Safari can't open page: Too many redirects occurred trying to open “http://www.acarguy.net/arnaldoburgosstudios/Home.html”. This might occur if you open a page that is redirected to open another page which then is redirected to open the original page.
    Can someone tell me what's wrong and how to fix it?

    UPDATE: After reading 10 pages of help I tried two things:
    System Preferences > MobileMe > log out > entered "garbage name + password" (to reset the preferences) > logged in correctly
    System Preferences > MobileMe > Back to My Mac > turned it OFF.
    Suddenly both sites loaded correctly and I can see them on my computer. However, the sites still don't display at all on 10.5.x Macs (G5 tower here, friends iMac in another state) but do display and act correctly on our old G4 running 10.4.x

  • Some navigation bar links have suddenly stopped working

    I have been producing a site in iWeb '09 for some time, with no problems. It is hosted by MobileMe.
    I use a custom-built navigation bar that is saved as a test page and duplicated as and when I need a new page. There have been no problems at all until suddenly the links on the navigation bar on one page (Blogs) ceased to work. At this point nothing had been modified at all. All the other links on the page work perfectly.
    Naturally I checked to see if a) here was something masking the links or b) if, for some reason, the link-enabled text boxes had been moved Backwards. They hadn't. The links on my test page are still working, as are all the other navigation bar links on the site.
    As I was planning to stop the use of comments on the Blogs page, I created a new page, using the White Blogs template, but without the ability to comment. I recreated the content and used the same working navigation bar as before, copied and pasted into place. All the navigation bar links work perfectly in iWeb '09 but once again, fail to work when published. The other links on the new page work perfectly.
    Main site is: http://www.midsomernortonplatoonacf.org.uk.
    Click on the Blogs link to see what I mean. Now try the following URL: http://www.midsomernortonplatoonacf.org.uk/MidsomerNortonPlatoon/TESTPAGE.html that will take you to the hidden test page. Click on the Reports link, that works perfectly, to go to my newly created, comment-less, "Blog" page - same problem!
    Any suggestions would be very much appreciated.

    Dirtyrobot,
    Ah ha! A cunning plan, but I'm sorry to say that, whilst it's a great idea, I'm one step ahead of you. I've done the usual Cmd+A to reveal everything, but there is nothing extra. I've brought all the text boxes with the links to the front as you suggested, but again nothing.
    The only thing that I did notice, whilst moving the entire contents of the page up and down, was that there was a hidden line near the top of the page - not an actual physical line that could be selected, but a sort of 'edge of code area' that was sometimes visible, BUT only when moving a block up or down over it. Neither changing Footers and Headers nor the Padding makes any difference. There is obviously something in the page code that I can't access using any of the tools in the page layout or format boxes in the Inspector. The fact that it HAS worked before, with absolutely NO changes to the page, is what has got me hacked off! The identical Nav Bar works on every other page, being merely copied and pasted from my master test page each time.
    Curious...

  • My MBP 7,1 wifi connection suddenly stopped working. It was working fine before until the battery emptied. I turned it on but it froze so I tried to reset it. Then, after that it no longer detect any wifi signal in any areas I go.

    Hi Everyone. My MBP 7,1 didn't have any wifi issues not until 2 weeks ago. The laptop's battery got empty and when I tried to turned it on, the computer just froze. So I tried to reset it. However, I noticed that the wifi or airport can no longer detect any wifi signal. There were instances that it wouldn't turn on when I shut it off but now, it seems okey. I tried the zapping of PRAM and deleting all the things needed as I saw in different threads but it still not working. The ethernet works fine but I still need the wifi. Its been 2 weeks already. I don't have an Apple Store near me coz I am in southern part of Philippines. Can someone shed light on this? Thank you so much.

    Hi!! To add more to the issue, the other day, my airport card is nowhere to be found. It now says no airport card installed which is really crazy. I also noticed that my MBP freezes during start up and I had to zap the PRAM so it would open up. Anyone there who experienced the same thing? I'd really appreciate your suggestions. Thanks!

  • Can anyone explain why all of my Spry Assets on a live website have suddenly stopped working?

    Can anyone explain why all of my Spry Assets on a live website have stopped responding? I have checked that the Spry CSS and JS files are in place. Then checked the files on Dreamweavers live view and they are not working there either. It was fine a few weeks ago, it is almost as if the web browsers have stopped rending Spry, for example, the links for the collapsible panels are not even being recognised as links.
    I am using 'old' spry assets on Dreamweaver CS4 (if that makes a difference). The Spry Assets used are Tabbed Panels and Collapsible Panels.
    Thanks for your help.

    Something has been going on, when I look at the bottom of your document (as pasted below), this is normally all at the top after the links to external style sheets.
    <script src="js/jquery-1.10.2.min.js"></script>
    <script src="js/lightbox-2.6.min.js"></script>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
       <script type="text/javascript" charset="utf-8" src="Menu_Photography_edgePreload.js"></script>
       <script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
       <script type="text/javascript">
    <!--
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
      var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
      if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_findObj(n, d) { //v4.01
      var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
      d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
      if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    //-->
    </script>

  • Iphone 4 Apps (non Apple) have suddenly stopped working

    I let the battery run completely flat on my iphone 4 last night - fell asleep listening to tune in radio. When I plugged the phone back into the charger the date on my phone had reset to 1 January 1970 and the time was about 8 hours behind UK time. All of the apps icons were still there but when I click on the icon the app title page momentarily flashes on the screen before failing. The apple apps are working fine and the ipod music is all there.
    I noticed from other posts that a similar problem occurred last year with the iphone 3gs. Has anyone else experienced this problem with the iphone 4 and can anyone suggest how I can get my apps to work. I really want to avoid having to reset the phone and reload all the apps if possible.

    Try downloading a free app from the iTunes app store with your iPhone and using the app. If the new app work, try the others.

Maybe you are looking for