Data Set copy takes longer than normal, nothing happens

Hello guys,
I've Server 2012 Std. (was migrated from 2K8 R2 to 2012 Std.) with SCDPM 2012 SP1.
Following components are installed: KB2822782, KB2853210, KB2877075, KB2886362.
Since ca. 171 hours the data set copy runs, nothing happens since that. Transferred data is sill on 536.879.13 MB.
Has anyone had it already?
Regards
Rodi

Sorry i don't really know how to access the boot messages? All other distros stored this information in /var/log/boot but i assume Arch doesn't :-/
peter@antartica ~ $ systemd-analyze blame
5s 12ms 753us [email protected]
276ms 771us wicd.service
170ms 510us bluetooth.service
163ms 497us systemd-udev-trigger.service
136ms 982us alsa-restore.service
114ms 708us laptop-mode.service
109ms 867us lm_sensors.service
83ms 663us tmp.mount
73ms 285us systemd-vconsole-setup.service
73ms 251us systemd-tmpfiles-setup.service
68ms 116us polkit.service
67ms 1us sys-kernel-debug.mount
64ms 340us systemd-sysctl.service
63ms 773us dev-mqueue.mount
60ms 100us var-tmp.mount
59ms 797us systemd-user-sessions.service
56ms 847us dev-hugepages.mount
50ms 242us systemd-logind.service
50ms 139us sys-kernel-config.mount
46ms 682us systemd-remount-fs.service
42ms 955us systemd-journal-flush.service
36ms 900us udisks2.service
36ms 807us systemd-udevd.service
18ms 279us upower.service
16ms 458us rtkit-daemon.service
1ms 864us systemd-random-seed-load.service

Similar Messages

My mac pro 13 takes longer than normal to start?

My mac pro 13 takes longer than normal to start. What do I need to do to speed up the start up process?

with "normal" are you comparing it to other MacBooks? or to your model in the past?
installing a SSD would increase the boot up time a lot if you don't have one already...
also check what apps you have set to automatically open on startup because some/a lot will slow the startup down

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrong

What backups do you have?

Ipod Classic 120GB takes longer than normal to sync

Since updating my iTunes my 120GB iPod Classic seems to take a while to sync or does it rather erratically. I mean it starts syncing and iTunes will say "syncing" and the ipod window will simply say "connected" then it will revert back to saying "syncing in progress". Could that mean something might be wrong with it?
Bearing in mind I had to wipe my laptop with Windows 7 the other day and reinstall everything.
Everything does sync up but Im worried about the time it takes to sync and the conflicting image screens I get
Message was edited by: MSolari

with "normal" are you comparing it to other MacBooks? or to your model in the past?
installing a SSD would increase the boot up time a lot if you don't have one already...
also check what apps you have set to automatically open on startup because some/a lot will slow the startup down

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Locking entities takes longer than consolidation

Why would locking/unlocking our entity tree take longer than a consolidation?
HFM 11.1.2.1

There really isn't anything you can do about it from an application perspective. Make sure when you lock that no other processes are taking place so you're not competing for CPU and RAM with a currently running data load or consolidation. Make sure you have good hardware both on the HFM app server and the database server (I'll avoid a rant here about poorly configured virtual environments...). From a process perspective, try to design a process where users responsible for the base entities lock their own entities so you're never exposed to locking all of them yourself.
Some customers are very happy to use third party utilities such as Amosca's EPM Maestro to automate this, among other tasks. It won't speed up the actual lock, but it will make it easier for you to get the work done.
--Chris

Importing mpgs takes longer than it should

Importing mpgs takes longer than it should. I import 2 hr mpgs on a 6core 32gig ram machine & it takes too long. cs5.52

Wow. Sounds like a nice machine Steve. How long does a 2hr mpg take to import?
I just tested it out, and for me it takes about 5 min. ...which, in my opinion, is still too long, and should take no longer than it does to import something into PPro.
I understand your frustration there.
I think I mentioned before that Encore uses mp2 DVD files best. If you import things as mp2 or the DVD m2v file format, there is virtually no import time, and you do not have to transcode everything.
That said, unless there are things going on under the hood that I don't know/understand, I still agree that importing video files to timelines in Encore should take no longer than importing into Premiere. We don't need Encore to author or transcode until we're ready to export.

Emptying the trash taking long than normal

I started to have a problem to empty the trash, is taking longer than normal to empty. This started two months ago. Any ideas of what coud it be?

Hope this helps.
http://reviews.cnet.com/8301-13727_7-10420037-263.html

Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before. Has Microsoft taken over Apple software?

SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.

Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done...

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

Password Reset Emails take longer than 6 hours to arrive, expired once they finally show up

HelloI have searched the boards and found instances of people with the same problem, but no solutions. I have been going back and forth with skype support, but all they send me are canned responses with the same useless instructions over and over..... and despite my requests to read and actually reply, or to elevate my questions to a supervisor, all I get are canned responses over and over again. The bottom line is my wife forgot her skype password, we attempt to request a password reset token be sent, said token takes longer than the 6 hours validity period to arrive and is useless by the time we get it, then we are prompted to enter her email for another reset token, which takes more than 6 hours to arrive, completing this ridiculous circle... Advise, ideas, help are all greatly appreciated Thanks

Bad news.I spent the last 4 days going back and forth due to the same issue. The email arrives after 3 hours (should we consider an improvement?) but at the time I check the email, the token is expired so I need to re-initiate the process. Very annoying and not up to today's industry standards for password recovery. Even banks take 10 minutes the most... Bottom line, Skype says this is an issue they recently expereienced. Based on the previous post, the term RECENTLY is very vague.

HT2486 Iam trying to download data from a group in my address book into Numbers. When I click on the data to move and drag to Numbers nothing happens. Using OS X ver 10.9.2 iMac

Iam trying to download data from a group in my address book into Numbers. When I click on the data to move and drag to Numbers nothing happens. Using OS X ver 10.9.2 iMac

With Numbers 3.2 (released April 2014) drag and drop works on my machine again, either onto the canvas or into an existing table.
What also works (as Wayne described): select multiple contacts, command-c to copy, and (after clicking the canvas or a cell) command-v to paste.
SG

NewMacPro 4cor. Seems to take longer than I expected to boot up. This normal?

I just got my new MacPro 4 core with 512GB SSD and 16GB RAM. D300 GPUs.
I have noticed that when I start it up i have a white screen for longer than I had expected befor the user login screen appears.
Anyone else seen this? Running Mavericks 9.2. I have not loaded the latest security update as I have heard it can be a bit problematic.
How long does your nMacPro take from power on to login screen?

Disconnect all your perhipherals and start looking there for an issue.
Do a SAFE BOOT once, then restart, then do a restart again. What is it now?
Go into Recovery Mode and repair disk at two points, the top raw drive level, and the Mac OS volume partition both.
Do you have Windows Boot Camp or something else on the drive as well?
Longer is not going to help as can be seen. But let's assume longer means some time frame of more than 15 seconds? and you went to control panel to select default partition after insure with Repair Disk and Safe Boot it is in good working order, and nothing is attached affecting booting.
Did it do it on day one? when did it change? what was done in that time?

Infopackage takes longer than usual

Hi
I've got an Infopackage that normally loads at 7 mins long.
But intermittently (e.g. once a week), the loading will take more than
1 hour.
May I know what is the possible cause for such problems?
Rgds
Rusyinni

1. Limit the amount of created data packages for each load between 1000 -1500 as described in below mentioned SAP OSS note:
892513 - Consulting: Performance: Loading data, no of pkg, req size
Note: 1000-1500 = sum of data packages over all data targets, i.e. with three targets 350-500 packages
How to limit the amount of data packages for the delta load:
Go to transaction RSA1 select your dedicated infopackage -- menue-- DataS. Default Data transfer --enter the max. nummber of data packages to be created for each delta load.
2. Global level :Use Transaction RSCUSTV6 for changing configuration setting for all the infopackages globally :
(i).Frequency with which status Idocs are sent : It means how many data-IDocs are described by one Info-IDoc.In simple terms after how many data idocs 1 info idocs to be sent .The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.You should choose a frequency between 5 and 10 but not greater than 20.
(ii)Datapacket size (Number of Data Records per Package) The basic setting should be between 5000 and 20000 depending on how many data records you want to load
.Recommendation :You should not divide up the quantity of data into too large a number of packets since this reduces performance when uploading. The number of data packets should not be more than 100 per loading process.
(III) ROIDOCPRMS : In order to make the RSCUSTV6 settings work you also need to do the related setting in ROIDOCPRMS in source system .
3. Increase the parallelization of the infopackage if possible
Got to transaction SBIW  increase the amount of wp which can be used.
Please read also OSS note:
595251 - Performance of data mart: Deactivating tRFC sending in BW
4.. Our Infopackage consists of 3 type of message types RSINFO , RSREQ , RSSEND etc. There is a standard program RSEOUT00 in the source system that is used to pushed IDOCS to OS layer .Therefore create variants for the above message type for this program in the source system .Also create some Background job for this to be run after every 30 minutes .You should not increase the frequency more than this .
Hope this helps .

Apps take longer than 15 seconds to get deleted

I got my iPhone 4s last September amd since then I've updated the firmware twice hoping that would solve the problem but it didn't so please tell me what else i can do:
When i hold an app to delete it, it does start to wriggle immediatly but when i press the delete button it takes more than 15 seconds for the are you sure message to pop up. I don't normally delete apps so i keep forgetting that that bug is there but when i do delete apps its when i urgently need space to take a video or something so its really frustrating when it takes me over ten minutes to just delete a couple of apps and yes it doesn't happen for just one delete it happens for each delete. Ever since i upgraded to 5.1.1 the freeze time decreased a bit to 15-30 seconds it used to be longer but i could really use a permenant fix for this. I searched around a bit and didn't see that anyone else had complained of this problem so i dont know what to try and i really need someone to tell me how to fix it. Thanks!

It is also possible the the disk space is low. How much space do you have left on your phone?

Data Set copy takes longer than normal, nothing happens

Similar Messages

Maybe you are looking for