Data size increase more than 5 fold after essbase services hangs up

I have a situation where data explodes by more than 5 fold after essbase hangs. This data explosion occurs not just at level 0 but at the parent also. The logs does not really tell me anything, but it really seem to be a consistent process.
Any thoughts?
Thanks

If you export the level 0 data iin column format I bet you see a lot of either zero data or data which is repetitive; I've never seen essbase just spontaneously make data without a calculation or incorrectly setup member formula causing it.
What are the circumstances around the hanging condition? How do you get out of the hang condition? When was it stable last and what changes have been made to the outlilne and/or calculations since this behavior began?
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

Error message "Transfer date 30.06.2007 is more than one year after the clo

Hi SAP expert,
I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
Hope u guys can help me. Thanking u in advance.
Regards,
Nazrul

Hi SAP experts,
any solution for my porblem?
TQ

Cant we create a custom PA infotype whose size is more than 1000 chars?

can we create a custom PA infotype whose size is more than 1000 characters
i have tried this way i have given 4 fields in PM01 transaction with the data element 255 so the total size is 1020 it is throwing an error. pls help......

Hi,
as described in the following documentaion the length of the data could be 1500 bytes.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm
Regards
Bernd

How we will know that dimension size is more than the fact table size?

how we will know that dimension size is more than the fact table size?

Hi,
Let us assume that we are going to take Division and distribution channel in a dimension and assume we have 20 distinct values for Division in R/3 and 30 Distinct values for Distribution channel .So Maximum, we can get 20 * 30 records in dimension table and we can take rough estimation of records in the cube by observing the raw data in source system.
With rgds,
Anil Kumar Sharma .P

Can we open more than one "folder" at a time in Bridge?

When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
Please alleviate my ignorance.

Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
Not so quick way: Select menu File => New Window. Open the second folder there.
If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
1) View the parent folder in bridge.
2) Open the Filter palette.
3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

Unable to view image if the size is more than 3KB using XML Publisher.

Hello,
We are printing PO approver signature using xml publisher (rtf) on a pdf.
If the size of the image is 3KB or less, the image gets printed.
But, if the size is more than 3KB the image does not get printed.
Additional Info:
1. The signature is stored as jpg image in fnd_lobs table.
2. On following code is mentioned in the rtf
<fo:instream-foreign-object content-type="image/jpg">
<xsl:value-of select="IMG_SIGNATURE"/>
</fo:instream-foreign-object>
3. We are using the following function that converts BLOB to CLOB.
CREATE OR REPLACE FUNCTION XX_BLOBTOBASE64
b IN BLOB
RETURN CLOB
IS
sizeb PLS_INTEGER := 4080 ;
buffer RAW(4080);
offset PLS_INTEGER DEFAULT 1;
RESULT CLOB;
BEGIN
-- dbms_lob.createtemporary
-- lob_loc => RESULT
-- , cache => FALSE
-- , dur => dbms_lob.CALL
-- LOOP
-- BEGIN
-- dbms_lob.READ
-- ( lob_loc => b
-- , amount => sizeb
-- , offset => offset
-- , buffer => buffer
-- EXCEPTION
-- WHEN no_data_found
-- THEN
-- EXIT;
-- END;
-- offset := offset + sizeb;
-- dbms_lob.append
-- ( dest_lob => RESULT
-- , src_lob => to_clob(utl_raw.cast_to_varchar2(utl_encode.base64_encode(buffer)))
-- END LOOP;
DBMS_LOB.createtemporary(lob_loc => RESULT, CACHE => FALSE, dur => 0);
Wf_Mail_Util.EncodeBLOB ( b, RESULT );
RETURN RESULT;
END;
Requesting any of you to let us know if there is any method to resolve this issue.
Thanks,
Angelica.

Hi,
Are you using Outlook.com to send/receive emails? Based on my research, we can only add an image/ picture in your e-mail signature that’s Web based (picture that is available in existing websites or stored in an online storage). See:
http://answers.microsoft.com/en-us/outlook_com/forum/osettings-oemailset/add-logo-to-outlookcom-signature/4455facf-0926-42a6-aad7-756de662a865
Since this forum is for general questions and feedback related to Outlook desktop application, if you are using Outlook.com, I'd recommend you post your question in the Outlook.com forum:
http://answers.microsoft.com/en-us/outlook_com/forum?tab=Threads
The reason why we recommend posting appropriately is you will get the most
qualified pool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Creating form - want to change font style and size in more than one field at a time HOW??

creating form - want to adjust font style and size in more than one field at a time - HOW??

Select the fields with the mouse, right-click one of them, go to Properties
and set the settings you'd like them all to have.
On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]>

How can i sync more than one folder from My Pictures to my iphone 4?, how can i sync more than one folder from My Pictures to my iphone 4?

Hi,
how can I sync more than one folder of pics from My Pictures on my computer to my iphone?

http://support.apple.com/kb/HT4236

I red that Oracle Data Integrator provides more than 100 KMs out-of-the-box

I red that
Oracle Data Integrator provides more than 100 KMs out-of-the-box.
Is anybody have any idea how I can reach or view it or use it ?

I got it its under <Oraclehome>oracledi>impexp

Source system contain more than one fold then they are not processed

when a mail box for a source system contain more than one fold they are not necessarily manage in the right sequence order (FIFO)
The folders stand for material update flows.

Hi XI Experts,
I have a problem with source directory of the File Adapter,
XI system is not reading the files from the source directory in the sequence when there is more than one folder .
See the below description regarding the same.
"when a mail box for a source system contain more than one fold they are not necessarily manage in the right sequence order (FIFO)
The folders stand for material update flows."
Please update me as soon as possible.
Regards
sreenivasulu

Can my 600MHz P-3, 256MB Ram handle a data acquisition of more than 1kHz with waveform chart support?

please suggest tools for acquiring high speed 8 analog channel data.
can my 600MHz P-3, 256MB Ram handle a data acquisition of more than 1kHz with waveform chart support?

Arun,
I have performed data acquisition on a computer with lower specs than the one you described, at rates greater than 1 kHz. I don't quite understand the "waveform chart support" portion of your question, but if you are asking if it is possible to plot the acquired data on a Waveform Chart in LabVIEW, this should not be a problem.
If you have more specific questions, let me know.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

SELECT MORE THAN A FOLDER TO OBTAIN INFOS

Hi Folks,
how can I do to select various folders and obtain just one message window with the total amount in bytes? When I select more than a folder and then select "obtain infos" Mac Os opens various message windows but I want a single message window like a Windows System.
Thank in advance.
LS

After selecting all folders, right-click one of the items, hold down the Control key (Get Info becomes Get Summary Info), select Get Summary Info. Or, if you hold down the Option key instead, select Show Inspector (I honestly don't know what the difference is between both panels). Also, CommandOptionI does the same thing.
Edit:
The difference between Get Summary Info and Show Inspector is that Show Inspector dynamically updates its information. If you add or subtract more items to your selection set, the Inspector will update its display to reflect the new selection set. Summary Info, on the other hand, just displays a static panel reflecting only the initial selection (regardless of whether or not other items have been included or excluded since).
Message was edited by: A.Carlo

Dear All, I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me. Thanks Vijay

Dear All,
I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
Thanks
Vijay

Hi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH,

Adding more than one folder to Photos on iPod 30 GB

Hola.
I have a 30 GB iPod that I can't seem to get to add more than one Photo folder. Since I updated to iTunes 7, it won't work (previously this wasn't a problem). It will only allow me to add one folder of pics and I don't use iPhoto.
I want to add more than one folder of pics to my iPod and iTunes 7 won't allow me to select that option. I've updated my iPod and iTunes and Quicktime (that shouldn't have anything to do with it).
Any suggestions???

Ok. I found the solution to my problem. You have select the PICTURES folder THEN click the second radio button that asks you to select more than one folder.
If you go directly to the folder you want and then try to click that second radio button, it won't allow you to!!
It only took 3 hours later . . .

How do I use more than one folder for screensaver on my mac

I have 3 separate folders that I want my computer to use when it switches to the screensavers but I can only get it to use one folder. I really want it to switch choose from the 3 different folders. Someone set it up for me before so I know it does it, I just can't figure out how. Thanks!

The presets from earlier versions of GR should all be in the same place anyhow.. so reinstalling GR5 into it's correct locvation shouldn't affect anything regarding those other presets. In fact, as far as I can recall.. GR5 should ask if you want to import older presets when you first run GR5 standalone (The app version of GR5 in your applications folder) after install....
Then those same presets should be present in in the AU version of GR5....
Also GR4 (So long as you updated it to the latest version via the Service Center) should also continue to work with Logic Pro anyhow.. and load when you load an older project which used that version....
Finally, any version you may have installed elsewhere.. won't work with Logic Pro because LP uses the AU Component version that is installed by the NI installer and therefore located in your components folder... Those other versions are more likely to be copies of the standalone version.. which LP9 doesn't use.

Data size increase more than 5 fold after essbase services hangs up

Similar Messages

Maybe you are looking for