Data Source 0PM_OM_OPA_1 extraction strategy

Hi Experts,
Could any one please guide me on Extraction strategy of Data source 0PM_OM_OPA_1
Thanks in Advance,
Nitya

closing this thread

Similar Messages

  • Single Standard data source which extracts material master and vendor master data

    Hi all,
    I have a client requirement where user wants to view material master and vendor master in a single report. Is there any standard data source which extracts both the data together..
    Thanks!
    Arvind

    Hi,
    Two are different master info objects and can't get them from one data source.
    think about multi provider or  info set on two master data objects to club them.
    Info object - 0MATERIAL and  data source - 0MATERIAL_ATTR
    Info object - 0VEDNOR and data source - 0VENDOR_ATTR
    Thanks

  • Data source and Extract Structure

    Hi all,
    I have a doubt on Data source and Extract Str,
    when i used one info cube with some char and kf's
    after i did extraction shall we change the extract strcuture prequently other wise better to use all the predefined extract strcuture hide in data source.
    if i hide in datasource after extraction i want to use some of hide fields, so we can use it? if we can use how can we extract data for that specified hide fields to bw side.

    If you wont to create the genaric data source at that time
    you can create cube with some char and kf.
    after extraction you wont to modify the structure ? if you mofify
    the structure then replicate the data source and delete the data
    and upload the data from r/3 to bw.its not correct way every time modifying the
    structure.if you put hide means that fields are not coming to
    bw side.if put modify the hide field ,first goto rsa6 edit data source
    remove the hide check box and save after come to bw replicate the data source
    delete the data and load the data (if you wont full data for hide field)
    if you dont load full load means only available upto data only what ever field you modify the
    hide to unhide,

  • No data in R/3 data source after extraction!

    Hello All,
    i am extracting the data from R/3 source system ( 4.7 ides system).
    after succesffully transferring the data source and replicating it to the BW, i had created a infocube and scheduled the info package so that R/3 data source data gets uploaded into the Info cube created.
    after scheduling in the header tab of monitor screen i found the error messege as "no data in R/3 data source, check your data source in R/3".
    is it that data does not exist in R/3 Business content data source or is that data has not uploaded into BW?
    can nay body here thorw some light onto it?
    Ravi

    Hi Ravi,
    Please check the tables associated with your datasource and look if the data is available inthe respective tables.
    You can also check the extracted records in T.code RSA3 in R/3 for your datasource.
    Hope it helps!!!!
    Regards,
    Amit

  • SM37 - "pause" V3-update job while importing data source and extract struct

    Hi
    Insted of deleting an hourly schedulated V3-update job and the recreating it (after a import of a extract structure and a data source) I came to think about whether it is possible to, kind of, pause the job that I otherwise would delete and recreate.
    Is this possible some how?
    My thought:
    1. Find the job in released status.
    2. Select the job and change it (top menu Job-->change)
    3. Change the scheduling to some day in the future
    4. Change job status from released to scheduled
    5. Import the extract structure and data source.
    6. Change the schedule job back to hourly run.
    7. Now the job should run on hourly basis again....
    By the way: what do I import first, the data source or the extract structure?
    Thanks in advance and kind regards,
    Torben

    We did delete and recreate...

  • Data source 0CCMS* extraction failed

    Dear Expert,
    I am trying to extract the following data sources from our ECC6.0 system.
    0CCMS_ASR_DATA
    0CCMS_DSR_DATA
    0CCMS_WEBAS_STATREC_DATA
    but the error message "Error 6 in function module RSS_PROGRAM_GENERATE" always come up once the extraction process started.
    Please your help on this.
    Thanks and Regards,
    Budi

    The problem is that this  datasource are a kind of exotic
    datasource-type. There are Segmented datasources.  That is,  if you look
    at their extract structure e.g.  CCMSBI_DSR_EXTSTR  the datatype of the
    fields cannot be interpreted correctly by RSA3.
    You can check them in transaction RSA2 and you will see that
    both of them are of Type SEGM, therefore it is not possible to
    test them from RSA3.
    regards,
    Colin |Moloney

  • Any data source to extract material price or Standard cost history

    Hi All,
    Currently we are using data source 0CO_PC_ACT_05 for material price extraction.
    But it seems this will only extract current period, previous period and previous year last period.
    But my requirement is to extract the material price history for any old periods.
    Do we have any table from where we can extract this details? or any standard data source through which we can extract this details?
    Thanks,
    Muruganand.K

    Hi
    Check MBEWH (Material Valuation: History)
    Thanks
    Kalyan

  • Controlling Data source (0CO_PC_PCP_10) Extraction setup

    Hi Guys,
    I want use controlling data source 0CO_PC_PCP_10 for cost estimate itemization report. and the data target is 0COPC_C10. FIRST TIME I AM WORKING ON CONTROLLING SIDE , please tell me the steps how to setup the data source in R/3 side, and how to activate the data source in r/3 side
    please send the steps asap , i will assign the full points.
    thanks
    kk

    Hi KK,
    Check these links if they r useful...
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
    http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
    Regards,
    Ram.

  • Data source not extracting Noted Items

    Hi All,
    I want to extract records from fbl3n and Noted Items.
    I feel 0fi_gl_4 extracts from the same. My issue is it doesnt pick the Noted Items.
    I read and came to know Note number 411758 helps to bring this, but our ECC sustem is in 617 component and we are getting
    error message as SAP Note 0000411758 cannot be implemented.
    Can you help me with New SAP Note or do I require to do any config?
    Regards,
    Venkatesh

    Hi Kiran:
      Take a look at SAP Note 609847 - "BW: missing info for Info sources 0SGR, 0SCN, 0CGR".
    Regards,
    Francisco Milán.

  • Report painter -output parameters,Data source,Extract parameter, report

    Hi expert,
    1)What report painter -output parameters,Data source,Extract parameter, report mean for and what are the difference?
    2)I have create new report painter and transport to  Test server using T-code:GCTR and I find that the T-code always point to old report. As I had check the SE93 the D_SREPOVARI-REPORT is point to report group.Why this happen?
    3) Does creation of new report or modification of the report always need to select the extraction option so that it will able to display the relected changes? Because, I have done modification on the report but it is not reflected the changes even i save until i have to create the extraction is able to display the report but every time i run the report need to select the extraction with option to choose new extract or old. Kindly advice how to save and create the report painter and save will display reflected result .
    Please help

    Hi BR Christian,
    Thank you for the prompt reply.
    I have few querys as below:
    1)Do we every time create new report by copying the existing report painter need to select output parameter, data source and extract parameter in order to be able to display the new report?
    2)when modify existing report painter and save it do we need to select output parameter, data source and extract parameter in order to be able to display the modify report correctly?
    3) What are the different between right click copy the report inreport painter compare with create report painter with copy GRR1?
    4) What are the T-code for modify the report group?
    5) When I create a new report with the right click copy in GRR1 and modify the report painter column only and everything remain the same just the report name different why when execute the report it always appear in the selection screen with report button which have option button to select the 2 version  of report which one is the destination report that I copy from and one is the new report? How to set the report when execute will only display the new report only without need to select the option with just new report only?
    6)For transferring reports you can use GR37 (export) and GR38 (import) can be use to transport from one client to another client? What is difference between GR37 compare with  GCTR?
    7) If I use GR37 and GR38 it is mean no need to create the transport request which as usual we create transport se10?
    we can directly import to another client ussing GR38?
    8)When we create a new report with copy with the existing report with just modify the report colunm and the report name difference only what are the setting example: report,report group need to be selected to be include to export/transport to another client?
    9) What are the difference between library and report group?
    10) Can we set Se93 to execute only report not report group? How?
    11) when using GR37 to transport it is also include the report group,library and the particular report?
    12) Can I include the variable in the column header to display fiscal year which I have selected from the selection screen?
    How and which variable should i use?
    please help.
    many thanks
    Edited by: KH on Jun 18, 2011 6:52 AM
    Edited by: KH on Jun 18, 2011 6:55 AM
    Edited by: KH on Jun 18, 2011 7:06 AM

  • Data source creation for service contract configuration

    Hello all,
    I have to create a data source for extraction of service contract configuration. I think this could work like data source creation for sales order creation, but I don't know waht to enter in transaction CTBW. Anyone here has done this previously? Any pointers and/or the strategy you've used will be useful.
    Kind regards,
    Simon

    Hi,
    If you are asking about "CRM sales contracts", The following help gives the info about standard ODS and Datasource.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d5/9fcd3b869e7d72e10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • What are the steps need to be taken care  for MM data sources  while extrac

    what are the steps need to be taken care  for MM data sources  while extracting  from R/3 tables
    and please provide the Steps involved in R/3 side
    thnaks
    Racha

    Hi,
    For Inventory Management, you can have a look at the following link.
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

  • Data source for getting PM order cost.

    Dear all,
    I have created a DSO and used the data source 0PM_OM_OPA_1 - this is done to get a report which will give details of the planned and actual cost orderwise and with value category description.
    I am only getting one cost when checked in the data in the target - how can i get both planned and actual cost in my report?
    Experts suggestion will be highly appreciated.
    Regards,
    M.M

    Hi,
    the CO-Sources (and PM is similar there) deliver plan and actual costs in different rows separated with the characteristics 0VTYPE and 0VERSION (this one separating different versions of plan data) in your case you will get in your transactional data:
    ServiceOrder   0VTYPE    SWG (i leave the rest of the keys and attributes out)
    SO1000          20             15.000 €   for your plan date
    SO1000          10             10.000 €   that are your actual data
    so what wil happen if 0VTYPE is not a Key in your DSO is that first the plan record is updated in DSO and then the second actual record overwrites this value becaus both have the same key SO1000.
    You have to define carefully what keys you use in DSO to avoid this. If you can try create a test-Cube on base of the DataSource fields and look how the data are displayed in there because a cube regards all fields as key's.
    regards
    Christoph

  • How to connect to different data sources in  XI 3.1 UNIVERSE?

    hi experts,
    We are going to migrate from BO 6.5 to  BO XI3.1.
    and we have different data sources to extract and generate the reports using various tools like Webi,Crystal Reports, Deski etc.
    1         How to connect to different data sources like SAP BI query, DB2, Oracle etc,, provide me the step by step solution.
    2     We need to migrate the universes and reports from BO 6.5 to BO XI 3.1 using the Report Conversion Tool.
    can we directly convert from the deski reports to Webi or do we need to migrate first through Import Wizard?
    3    Scheduling the Reports through Infoview
    4    Various issues and how to resolve those issues, we generally face while scheduling, and while creating the queries like for example time out errors etc..
    5    BO Security
    6    Universe creation with best practices and the loops,contexts,aliases etc..
    please provide me the step by step solution documents and links.
    thans in advance
    venuscm

    I would recommend to take a look at the official documentation. YOu can find this here
    http://help.sap.com
    NAvugate to SAP BusinessObjects->All products and the select the product you want eg. BusinessObjects ENterprise or Universe designer and the appropriate version XI 3.1. Take a look at the admin and the user guides.
    Currently the Data FEderator will allow you to buid a universe that access data from various data sources. Another option is to merge queries from different universes at report level.
    Regards,
    Stratos

  • Missing Source in Generic Data Source in CRM

    Hi All,
    Currently I am having an issue with a Generic Data Source in CRM. The consultants have actually build a data source by referring to the transparent table. I am not too sure how he did it.
    Whenever I open up the transaction RSO2 to look at the data source, the "Extraction from DB View", "Extraction from SAP Query" and "Extraction by Function Module" is totally blank.
    How would I know how does the consultant setup this extractor? Is there any other program that will have some kind of code to pull it from which transparent table?
    Thanks.

    Hi David,
    Your datasource is based on "extraction using Function module". You need to check the function module SMOX3_GET_DATA in se37 and find the tables from where the data is fetched.
    Also check this blog by Roberto to find the table and fields: /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
    Bye
    Dinesh

Maybe you are looking for