Data Source activation error

Hi
I have activated 2LIS_13_VDKON, i need to enhance the structure with some fields. WHen i append the structure with ZKAWRT of component type KAWRT (currency field) its not appending and giving me error is check table needed to be given. Infact KAWRT field doesnot have check table. I am doing this in ECC 6.0
can someone help me with what to do?

Hi,
in your enhance structure you have to maintain the TAB currcy/quant fields with the reference table and ref. field (currency) to which your KAWRT refers to.
For instance if it is the same currency than your condition value, you should maintain MC13VD1KON as ref table and WAERK as ref. field.
hope this helps...
Olivier.

Similar Messages

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

Data source activated in RSA5 but error in RSA3

Hi,
I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction Message no. RJ012").
Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
Thanks
Arunava

Bhanu,
Thanks again for your super fast reply. This really solved my issue.
However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
I would really really appreciate.
Thanks
Arunava

0CUSTOMER_ATTR Data source Activation Problem

Hi,
I am trying to Activate 0CUSTOMER_ATTR Data source at BW side. Its giving warnings
     'Field UMSAT ( Position 76 ): Packed numbers should have an odd number of digits'
while Activating
     "Error when creating transfer structure /BIC/CCBB0CUSTOMER_ATTR in source system "
     "Error when activating DataSource 0CUSTOMER_ATTR "
Regards,
varun

Hi,
try to replicate the datasource and then run program RS_TRANSTRU_ACTIVATE_ALL for this infosource in SE38.
If this does not help take a look at this forum threads:
Transfer Structure Error
Error while activating Transfer structure
Error when activation transfer structure..........,
Error activating Infosource
The warning 'Field UMSAT ( Position 76 ): Packed numbers should have an odd number of digits'
should be no problem because it is a content object.
Regards
Andreas

Data Source Activation - Master data u201CSource Not Activeu201D (Func. Mod. based)

Generated an export data source, message appears that it is u201CSuccessfully generatedu201D. I then selected the logical Source system and u201CReplicated all data sourcesu201D
I checked in RSA2 (data source repository in BI) and it exits.
Now that I am trying to use the generated datasource to load another MasterData Char Attributes, I get the error message u201DSource Not activeu201C, I am trying to create a transformation from 1st infoObjectu2019s export datasource to this object (both are of the same type etc)..
I am aware that we can use the program RSDS_DATASOURCE_ACTIVATE_ALL but this only works if we can see the datasource is RSDS (which I can not for this Datasource, perhaps the reason being that it is Function Module based? )
How else I could activate it? What other steps I should take or anything that can help me?   Please give your suggestions and I will say THANKS the SDN way.

I had the same problem today with an export DataSource generated on a planning area in our production SCM system.
I debugged running RSDS_DATASOURCE_ACTIVATE_ALL in our QA system for the same DataSource amd saw that the program calls function module RSDS_DATASOURCE_COLLECTION_ACT to do the activation. I ran the function module in production using the same parameters.
Our DataSource is 9A_PRG_PA for source system SCP100. I used SE37 to run function module RSDS_DATASOURCE_COLLECTION_ACT with these parameters:
I_T_OBJNM     9A_PRG_PA                     SCP100
I_WITH_CTO
I_CONTEXT     'ACTIVATE_ALL'
I_FORCE                     X
This made an active version of the DataSource appear, and I was then able to run RSDS_DATASOURCE_ACTIVATE_ALL to activate it properly.
Cheers,
Paul

Data source activation

HI Experts,
we are enhancing the data source 0CRM_SRV_PROCESS_H.After replicating the data source in bw,we are mapping the info objects with fields in transfer rules.When we are activating the transfer rules in BW it is giving the error no psa data exist for the data source.
and when we go to display data source the Active version is "does not exist".and it is not at all allowing to activate the transfer rules.
I tried RS_TRANSTRU_ACTIVE_ALLl,but it is taking long time and it is not coming.
I also go through the sap notes mentioned in the earlier posts,but does not work.
We are using 3.5.Can any one help me how to rectify this error.
Thanks in advance
sridath
Edited by: sridath on Aug 24, 2009 7:55 AM

Hi All,
we tried all the possible ways to activate the data source,but was fialed.
Now we are deleting the data source and replicating again,as it is already there in production.after transporting the new replicated data source the psa data will be lost.
in order to get the psa data how do i proceed further.
please help me..
sridath.

Data source Replication error in BW Quality system

hi experts,
when i replicate the data source in BW QUALITY SYSTEM it is giving the below error.
Invalid call sequence for interfaces when rec
changes.
plz find the long text
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.
After replication of data source changes are not reflecting in BW QUALITY SYSTEM.
REGARDS
venuscm

Hi,
Hope you have checked whether the DS has been transported to R/3 Quality and got activated before Replication in BW quality.
Check RFC connections between the systems.
Check RSLOGSYSMAP table in both Bw & R/3 to confirm the system mappings.
Try replicating again.......
Regards,
Suman

Warning in data source activation in R/3

Hi experts,
While activating the data source 0salesorg_attr it shows the
following warning:
============================================
Generating DataSource 0SALESORG_ATTR
The extraction structure V_VKORG_BW of DS
0SALESORG_ATTR is a view. This allows no CustApp.
============================================
I want to replicate this datasource into bi.
Anyone please provide me the solution.
Full points will be assigned.
Thanks & Regards,
V N.

hi,
hope u might have tried to change the structure hence might said the warniing, from RSA5 select the DS then Activate/Transfer then in RSA6 do select the required filed and save.
chk the data availabilty in RSA3 and then perform replication process in BI.
Ramesh

Data Source Activation in BI 7.0

Hi all,
I have seen lot of discussion on this subject in this forum but still having a problem. We are on BI 7.0 and Source System is ECC 6.0
I have activated datasource in Source system and replicated it in BW. My datasources are by default going into 3.x Datasources (R3TR ISFS). I read that it will pop for new datasource or 3.x datasource, it did not happen to me. I do not see any such thing in context menu of source system either.
SAP help documents state that "If SHDS is available for the D-TLOGO object in the BI shadow content, the relevant metadata is replicated in the DataSource (R3TR RSDS". Where can I find this shandow content in BI,
Can any one please help to resolve this.
Thanks in Advance
SN Dubey

Hi Chaitnaya,
This way is also not working. I am mentioning the steps here.
1. Activate data source in Source System. It is working fine in RSA3 as well.
2. Replicate datasource in BI. It is getting replicated successfully. No popup for confirming type of datasources.
3. It is automatically creating 3.x datasource.
Is there setting that I am missing either is source system or BI?
Regards
SN Dubey

HTTP XML Data Source authentication error

Morning All,
I have just started playing around with using XML as a data source for my CR4Ev2.0.1 reports.
I have managed to create the local inline reports and change their data source loacation with no current
issues.
I am now trying to create the HTTPXML reports using code from Ted's BLOG.
I manage to create a new report, and can open it in design, I can see the data source structure but as
soon as I try browse the data or preview my report I get the following error
Cannot Open file
Server returned HTTP response code: 407 for URL:
http://myserver/httpxml.xml
I had a quick look up the 407 error and it seems to be a Proxy authentication error, we do have a proxy
server setup which requires a username and password.
Before I go through what I have tried I want to confess that for this httpxml.xml file all I did was take my
inline.xml file and rename it and make it avaliable via a URL. So this might be the whole problem but I
am sure this is ok.
So I have tried turning off the proxy server as this URL is local so I dont need to go through the proxy.
If I go to the URL in my browser it works fine and I do not need to enter any proxy details.
Thats the problem with my HTTP XML attempt.
If I use the code as is, from Ted's BLOG, for
Crystal Reports off of HTTP XML data URL
and try use the following 2 URLs
propertyBag.put(
"Http(s) XML URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/orders.xml");
propertyBag.put(
"Http(s) Schema URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/orders.xsd");
propertyBag.put(
"Http(s) XML URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml");
propertyBag.put(
"Http(s) Schema URL", "http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xsd");
But I get the following errors
Exception in thread "main" com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon
Error: {0}---- Error code:-2147217393 Error code name:dbLogonFailed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.byte(Unknown
Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.addTable(Unknown
Source)
     at com.businessobjects.samples.CreateHttpXML.main(CreateHttpXML.java:90)
Caused by: com.crystaldecisions.reports.common.LogonFailureException: Logon Error:{0}
     at com.crystaldecisions.reports.queryengine.Connection.br(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.bs(Unknown Source)
Any ideas as to what my issues are or what I am missing.
Thanks in advance.
Darren
Edited by: Darren Jackson on Apr 28, 2009 2:12 PM
Is there any documentation as to what entries I can use in the property bag.
Like is there a ("ProxySet", false) or something along those lines?
Edited by: Darren Jackson on Apr 28, 2009 5:28 PM
I have made a little more head way.
I saved the Orders.xml and Orders.xsd files onto my webserver and editied the code to only worry about
the Orders and ignore the Customer files.
I now create my reports, open them in Eclipse to design them, but when I try preview the data it is now
asking me for a username and password. I have tried all combinations that I can think of for our systems
but none work.
Grrrrrrrrrrrrrrr

I have subsequently determined that my main problem was my "cached" proxy settings within Eclipse.
Even though I removed the proxy settings in Eclipse, it still required me to restart Eclipse after which it
all started working ok.
That was my main problem, but I am still interested in the Property Bag options that I mentioned before.
If proxy settings are needed, how would one go about setting these details?
Thanks
Darren

data-source problem error 503

i m using oracle10g database . through jdev-embedded 0c4j , i want to run my strut application . i m having problems with data-source entry.
i give either of following 2 entries in struts-config.xml and get this error
503 Service Unavailable
Servlet error: Initializing application data source org.apache.struts.action.DATA_SOURCE
my data-source entries are
1
data-source type="org.apache.commons.dbcp.BasicDataSource"
name="jdev-connection-DBConnection1"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott" password="tiger"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"/>
ps :- i have added dbcp in my default project properties
or i use
<data-source name="jdev-connection-DBConnection1"
class="com.evermind.sql.DriverManagerDataSource"
location="jdbc/DBConnection1CoreDS"
xa-location="jdbc/xa/DBConnection1XADS"
ejb-location="jdbc/DBConnection1DS"
pooled-location="jdbc/DBConnection1PooledDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott" password="tiger"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"/>

To get quicker help (or to get help at all), please use a more suitable forum. I think, your problem is not a general database problem, but very specific. Try
http://forums.oracle.com/forums/index.jsp?cat=13
(topic OC4J/J2EE)

Hyperion Planning Data Source Configuration Error

Hi,
I'm trying to configure Planning. I'm at the last step of the configuration utility, and trying to configure "Data Source Configuration" for Planning.
When I try to do it, I Create the Datasource, I give the Datasource name, and I select the database (which Oracle), and it throws me the error at the step Relational Storage Configuration Details:
com.hyperion.planning.HspDSRdbPanelManager, ERROR, Relational Database Connection Failed:= :[Hyperion][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (******) was not recognized by the Oracle server.
I'm sure that I'm entering the correct database details. But still not able to understan why it is not accepting it.
I'm picking up the SID from the TNSNAMES.ora correctly. I'm able to login to the Db via sqlplus with the same username,pwd and SID. Also able to connect to the Db via TOAD using the same credentials.
But not able to configure the Planning!!!
Kindly help.
Thanks.

Which version of planning are you referring to, what OS has it been installed on.
Does your tnsnames ora have different names in the configuration
net_service_name=
(DESCRIPTION=
(ADDRESS=(protocol_address_information))
(CONNECT_DATA=
(SERVICE_NAME=service_name)))
Is the net_service_name the same as the service_name, if they are different have you tried both of them?
Cheers
John
http://john-goodwin.blogspot.com/

Capturing Data Source Activation in a transport

Dear Gurus,
I 'm using the 0TR_LP_1 data source for my data loading and facing the following issue.
In DEV system , this data source have been activated by one of the developer but not captured in any of the transport request.
How can i capture the activation in another transport so that this data source can be activated in QAS and PRD system via transport.
Thank you
BR

Hi ,
You can fix this issue by following the below steps.
1--> Go to T code RSA6
2-> Find your data source --> Click on Object Directory Entry
4--> Change the package --> It will ask you for a transport
5--> Save it >Double click on your data source> Generate data socrce
6--> Then transport your data source
On the BW side
1--> Replicate data source
2--> If required reactivate transfer and communication structure using standrad programs.
This will solve your issue.
-Vikram Srivastava

Planning data sources configuration error

Hi,
We have installed epm 11. Within workspace there is the option to manage planning data sources. When this is run a couple of error messages appeared saying the awb database is not running another about the configuration not being correct. All the planning configuration was complete though.
Has any experienced problems with manage plannin data sources?
Thanks,
Nathan

Hi,
Awb database? Have you configured EPMA? Sounds like your config may not be correct.
If you have installed EPMA make sure it is correctly configured.
Seb

Data source - activation problem

Hello,
when I try to transport a datasource from the development system to the QA-system I always get the error:
Syntax error in GP_ERR_RSAPTD1, row 25 (-> long text)
Message no. RG102
Diagnosis
Field '/BIC/CE8CO_PA_02A' is unknown. It is neither in one of the specif
What could be the problem?
thanks

Hi,
export data sources of InfoCubes are transported with the associated InfoCube, you should not try to transport the export data source separately. Just pick up the cube and transport it, that should sove the problem and the exprot data source should be there, maybe you need to replicate data sources to see it.
Regards
Michele

Data Source activation error

Similar Messages

Maybe you are looking for