Data source enhancement while loading deltas
Hi Experts,
I've a scenario that while loading deltas do we perform data source enhancement if we can how do we do that.
This is i got a requirement, to enhance 2LIS_11_VAITM, while loading deltas. Now how do I go about this what are the exact steps that i follow to enhance.
Could s'one help in this regard because i'm new to the ABAP.
Thanks & Regards,
Amar
hi,
Go to the extract structure of this datasource and display the extract structure of the datasource in SE11 and click on APPEND STRUCTURE and click on the tick mark and try to add the fields required into the lines. You need to populate the data on to these new enhanced fields in the user-exit. But when you move these transports to production environment, you have to stop deltas and re-initialize the datasource....
Hope it helps...
Similar Messages
-
OSB: Cannot acquire data source error while using JCA DBAdapter in OSB
Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PMHi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
<connection-properties>
<properties>
<property>
<name>xADataSourceName</name>
<value>jdbc/SOADataSource</value>
</property>
<property>
<name>dataSourceName</name>
<value></value>
</property>
<property>
<name>platformClassName</name>
<value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Getting Duplicate data Records error while loading the Master data.
Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
RajuHi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy. -
Master Data Source Enhancement
Hi Gurus
I have a table in SAP which has customer, Sales Organization, Distribution Channel, Language (which is in EN always) and Customer Sales Text...
The Customer Sales Text is maintained at Sales Organization and Distribution Channel level..below is the example of one record...
Customer Sales Org. Distr. Channel Lang. Customer Sales Text
123 01 01 EN Blank (No text here)
123 01 02 EN Blank (No text here)
123 01 03 EN Blank (No text here)
123 01 04 EN Blank (No text here)
123 01 05 EN John Mathwes (Text appears here)
123 01 06 EN Blank (No text here)
so when i pull the data to BI i need to see only one record with Customer and text only (no Sales org and distr. Channel necessary) which has the Customer text value (5th record in above example)..
I created Data source in SAP and pulling the data to BI in DSO with customer and customer text....it's sorting and getting the latest distribution channel record (6th record in above example0
Can yo uplease tell me is there any way that i can get the record which has customer text in it..(any possibilities of writing abap routine in info package) or any data source enhancement with abap code...
can you pelase tell me the abap code that needs to be performed to solve the issue...
Thanks in advance
sailendraSort the RESULT_PACKAGE by customer and customer text in the endroutine of your transformation.
After the sort, the record with text for customer will be the last record and it will overwrite the other records in the DSO which has blank values.
Just add the below sort statement in your end routine.
SORT RESULT_PACKAGE[] BY CUSTOMER CUSTOMER_TEXT.
As per the sample records mentioned in your post, after the sort, 5th record will become the last record and this will overwrite the other records which has blank value in the DSO.
--- Thanks... -
Data source Enhancement for Sales Item
Dear SDN Mates,
We are enhancing the data source 2LIS_11_VAITM, when i try to enchance extraction structure it is not allowing to enhance. Showing a message :"2LIS_11_VAITM does not allow enhancing or append structure"
Mates if you came across these difficulties please let me know and suggest any ideas.
Thanks and Regards
Arun SHi,
Have a look at these links:
[SAP BW Data Source Enhancement|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16]
[Data Source Enhancement|Data source Enhancement Code Samples;
Hope it helps...
Regards,
Ashish
Edited by: Ashish Tewari on May 11, 2009 12:16 PM -
Data Source Enhancement for 2LIS_06_INV
Hi BW Experts,
We got a requirement. We have to work on Data Source Enhancement.
2LIS_06_INV is a LO Data Source. 3 extra fields required in existing Data Source.
That 3 Fields are available in single Table only.
I never worked on Data Source Enhancement.
Please can anyone tell me the steps.
I have read the forums but i did not understand it.
Thanks in advance
Regards,
Anjalihi anjali,
Every organisation has different structures so, the standard structure dosnt fit for all, in this situation u need to go for enhancement. based on your need u have add some field to std structure.
Check out this link...this z the best pdf for enhancing data source....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
pdf 'enhancements in sap bw' with steps
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Enhancement
User exit
hope it helps... -
Short Dump while loading Delta from ODS to ODS
Hi Experts,
I have run into a short dump error while loading delta from one ODS to another via a process chain.
Following is the error message:
Error analysis
Short text of error message:
Request 0000259294 is not completely activated. Please activate it again
Technical information about the message:
Diagnosis
Activation of request 0000259294 has terminated, or is not yet
complete.
System response
Procedure
If the process has terminated, all of the requests that the system
was unabe to activate in the most recent activation process have to
be reactivated before the new requests can be activated.
If you are not able to carry out this activation step, delete the
relevant requests from the administration of the ODS object (on the
Requests tabstrip).
Procedure for System Administration
Message classe...... "RSM1"
Number.............. 180
Variable 1.......... 0000259294
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
Can someone help me resolve this?
Thank youCheck the status of request SID 259294 in ODS, whether the Activation got completed or not. If not wait till the activation completes.
If there is any problem in the activation process, correct that complete the activation process and load the ne request that you want to load..
Regards
VJ -
Text not visible for the new fields created for Data Source Enhancement
Hi .... I am working on Data Source Enhancements. I created few fields and append then to the Data SourceStructure . I also have populated the fields with data. The problem with a field is that I am not getting the text displayed in RSA3 ..Instead I am getting the field name itself.
Example:
FieldName DataElement Datatype length dec Text
ZZDOCTY AUART CHAR 4 0 Sales Document Type
ZZNOODL ZD_NODL NUMC 1 0 Number of Deliveries
In the above example the field ZZDOCTY is showing me the description in RSA3 i.e. Sales Document Type whereas the field ZZNOODL is not showing the text. Instead it is directly giving the fieldname ZZNOODL. Is it because of the fact that I created a Data Element for that field ??? and as I did not use the predefined data element as I did for ZZDOCTY???? Please reply me soon.....I need to display the text as "Number of Deliveries" instead of ZZNOODL........I am working on 7.0.....May be the fields are hidden.
Go to RSA6 select your data source and on the tool bar there will be a pencil butonto change. Click that and at the bottom, you will lots of check boxes.
You go the field that you have enhanced and see whether the HIDE boxes are checked. If so, uncheck them, save and execute RSA3.
Ravi Thothadri -
HI SDNers,
I have done data source enhancement with 6 key fig and added those key fig to DSO in DEV and I need to move it to QA. Do I need to delete the data of DSO in QA before move. Do I get any issue with transportation? Actually this is most sencitive data for my client is it possible without deleting data?
Thanks,
SwathiHi Swathi,
You need not delete data from the ODS if you have only added fields to this object. If the no of records in the ODS are more the import of the changes will take a little longer. There should not be any problem.
Best Regards,
Murali. -
Data source enhancement thru function module
Folks,
I am trying to figure relation between data source enhancement, package, function module etc?
I see a function module where enhancement is done. when I go and try to see master data exit EXIT_SAPLRSAP_0002 ... I see include but I do not see reference of function module in this include?
All these codes are so simple... but I am struggling to figure out all these relation RSAP0001, exit_saplrsap* - include inside and function module attached?
Can somebody give very simple connection for all these components?
Thanks,
-SMHi,
All these codes are so simple... but I am struggling to figure out all these relation RSAP0001, exit_saplrsap - include inside and* function module attached?
Please note that for enhancing certain standard objects for meet customer needs, SAP provides different customer exits where we can code as per our requirements.
These customer exits starting with EXIT********* will be grouped by Enhancements e.g. RSAP0001
Thanks for your response. In RS02 it is clear that we can mention function module name for data source - that is good for generic extraction. But what do we do when we are enhancing SAP extractor?
When you want to enhance SAP extractors, you go for customer exits.
EXIT_SAPLRSAP_001 for Transactional datasources
EXIT_SAPLRSAP_002 for Master datasources
EXIT_SAPLRSAP_003 for Text datasources
EXIT_SAPLRSAP_004 for Hierarchy datasources
in se37 screen in table tab - sometime we see extract structure - that will establish which functional being called for which data source, but in my case - I do not see anything in table tab?
If your datasource is function module based, then the function module which is mentioned in RSO2 for your datasource would surely have e_t_data in tables tab with its associated type.
Only if the datasource is standard one and is processed by function module e.g. 2lis_18_i0notif which is processed by MCEX_BW_LO_API function module, these would not have associated type mentioned for them. To get their structure, you can go to RSA5/ RSA6 -
Data source Enhancement with Function Module
Hi all!
I have a requirement like I have to enhance my Generic Data source.
Let me make it clear!
I have 10 field in R/3 which I am able to get into extract structure using Generic Data Source on the corresponding Table.
I have another field on my extract structure, say ZEXMFLD1 which is updated by a function module ZZ_FUNC_MODULE_SAMPLE.
I came to know that Data source Enhancement can be done, but don't know how.
Request your guidance in this. Can u please let me know how I can achieve this?
Thanks,
SriHi Sri,
You can enhance generic datasources also.
For that you have to use below function modules based on your datasource type.
EXIT_SAPLRSAP_001 - Transactiona data
EXIT_SAPLRSAP_002 - Master
EXIT_SAPLRSAP_003 - text
EXIT_SAPLRSAP_004 - Hier
First check in CMOD(TCODE) whether component RSAP0001 is assigned to any project. If it is not assigned to any project(fresh system), assign it to a project by creating it.
Ex. ZBW. If it is already assigned, go SE37.
For transaction data go to function module EXIT_SAPLRSAP_001(Trans data) and start your logic.
CASE i_datasource.
WHEN 'your data source name'.
call you Function module - CALL 'ZZ_FUNC_MODULE_SAMPLE'.
pass the imported value from above FM to c_t_data.
close case with ENDCASE.
Let me know if you need more info.
- Kalyan. -
Data source enhancement using BADI
Hi,
We had a 2LIS_* extractor which is enhanced with ZZ fields.
I look for the sode in CMOD which i couldn't able to find any
My assumption is the data source is enhanced using BADI.....As i am not familiar with BADI's how can i create for my data source enhancement code in BADI
ThanksHi ,
Not sure on your question.
Is the Enhancement already done and you want to check whether it is done in BADI/CMOD.
Or
You want to populate the Data using BADI/CMOD.
In any case you can use CMOD or BADI to populate the data ,the recomendded is BADI which can be created in SE24..you can google for some Docs on its creation and steps to be followed.
And if tis CMOD you have to create a project and then write the code and for that also there are DOcs avaliable.
Rgds
SVU -
Data source Enhancements Using Badis
HI gurus,
Can you please let me know the process in detail to implement the data source enhancements using badi's.
Please provide me the step by step proceedure.
Appropriate answer will be highly rewarded.
Thanks,
Shashikanth.http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
I have a few links for u! Just download the documents and have a reading. You will get an idea:
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4493c4a6-0301-0010-62a2-efd6ded61e04
Reward points if helpful
Regards
Edited by: Aadil on Jan 23, 2008 8:42 AM -
Error while loading Delta request from one ODS to another
Hi,
I have 2 ODS . ODS1 is the source ODS and ODS2 is the target ODS. ODS1 has full loads daily
I have initialised delta from ODS1 to ODS2 and i was loading delta on a daily basis.
Today while loading from ODS1 to ODS2 it failed. Then i deleted the data from ODS2 (Target ODS) and tried loading again. But it again said 'No delta possible'. So i deleted the full loads from ODS1. But when i load again it says the previous delta is invalidated since the full loads in the ODS1 are deleted. Can anyone of you please let me know how to handle this situation without re-initialising.
Regards,
PramodHi,
I am not sure if you can go ahead without initializing again.
I feel you may not have reset the datamart before pulling the repeat delta. This was a mistake. On top of that you have pulled a Full request. It should have been ideally a full repair.
If you still have that full request in target try converting that into full repair by using this SE38 > RSSM_SET_REPAIR_FULL_FLAG (Change a full request to full repair request ) .
If it works you have a chance of continuing with your deltas. But you may have lost the last delta.
If it doesnt work and you have not pulled any delta after that load you have two options to retrieve the delta.
1. See if its in PSA. then pull from PSA and once done force request to green , next delta should be fine.
2. If its not there try reset the datamart in source ODS and pulling the delta again.
If both doesnt work you may need to perform full repair and then reinit.
Thanks,
JituK -
Duplicate Data records occured while loading
Hai Experts
While loading Duplicate Data records occured earlier there was less no of records i used to delete the duplicate records in background in PSA. Now i am having more records which i am confusing which to delete and which not to delete. Since it is a flatfile loading with delta update mode. and when i went to infopackage it is showing update subsequently in data target in hide position and i went through process chainipdisplay variant---- and made status red--- selected updated subsequently in data target
ignore duplicate data records. and i want to trigger the subsequent process. if we go through process monitor i can rspc_process_finish. I i go display variant then what is the process.......................... is there any function module.Select the check box " Handle duplicate records key" in DTP on update tab.
Thanks....
Shambhu
Maybe you are looking for
-
How can I use "Free Selection" in Dunning?
Hi, I am trying to generate the Dunning notice for only Customers that have the Dunning Area Code as 01. For that I am using the 'Free Selection". I have selected the Customer master and then the dunning area and didn't checked the Exclude box and th
-
Hi, can you please tell me the physical table name which can hold all the routines that we create in SE38 transaction? also tell me is there any table which can hold all the transfer structure routines? Thanks & Regards, Vijaya
-
Hi...Experts.... Requirement: From our PI 7.1 System we have to connect to MS-SQL Server 2000 using JDBC. Execution : We have downloaded Microsoft SQL Server JDBC Driver 3.0 ...and...Microsoft SQL Server JDBC Driver 2.0 ( We mean we tried both driver
-
I cannot downlaod a previously purchsed version of photoshope elements on a new computer...I get an error 413...header length to large...what do I do?
-
Profit Center Hierarchy Process Chain fails
Hello Friends, I have Profit Center Hierarchy load using Process Chain daily. Last night it failed. The log says : Saving Hierarchy Month 00 is not plausible. Does anyone have any idea about it. jose