Data source for crm table CRMD_ORDERADM_I

hi experts,
could you please tell me the standard data source for crm table CRMD_ORDERADM_I ?
Thanks a lot!

Hi,
There would be many data sources based on this table CRMD_ORDERADM_I.
Example.
Opportunity Item Attributes - 0CRM_OPPT_ATTR_I
Bids - 0BBP_TD_QUOT_1
Depends What exactly are you looking for.
Regards,
Joe

Similar Messages

Standard Data Source for FMGLFLEXT Table

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello Sasi and Kirun,
Thanks for your reply,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Data source for ECMCT table

hi,
can some one tell me the data source we should use for extracting data from ECMCT table?
the potential data source we identified is 3EC_CS1A but there is no documentation available on this data source.
could you documentation provide us the supporting docs or note no?
thanks in advance!!!
NA

Hi Samir,
welcome on board !
Take a look here:
http://help.sap.com/saphelp_nw04/helpdata/en/6c/4d6637a04c2367e10000009b38f8cf/content.htm
Hope it helps!
(and please don't forget to reward the answers..it's a way to say thanks !)
Bye,
Roberto

BW data source for R3 table glpcp

Hi BW folks,
I would like to create a data source in BW for table glpcp. Does anyone know of an existing one that I could use?
Kind regards,
Cheryl

Hi Abhijit,
The table glpcp table exists in R3. It contains PCA planned line items. and is a detail file. Glpct is the summary level table and has corresponding data source 0ec_pca_1.
Kind regards,
Cheryl

Data Source for CRM Servies item 0CRM_SRV_PROCESS_I

Hello BI Experts,
When Extracting with 0CRM_SRV_PROCESS_I
with Transaction 'RSA3' in CRM System,
I'm not always getting the Product ID even though
I can see that Product id Exists in transaction CRMD_BUS2000116 - Maintain Service Processes ,
Please advice,
kobi

Hi,
Then triggered the initialization of delta without data transfer for data source -0CRM_SRV_PROCESS_I.
Request gets loaded into the target and is activated successfully?
if you ran info pack - init without data transfer then what you loaded to target?
But when I open the scheduler -> initialization options for source system, I could see that the initialization was not successful?
Mean is there any error?
You ran info pack - init without data transfer? then whats the info pack log says?
is it green status with 0 reocrds or red?
Delete old init if exist.
Re run info pack - init without data transfer and check it.
Thanks

Data Source for Table CRM_KNVH_TEMP

Hello Experts,
I have an issue related to the Hierarchy of Partner number. I have checked the data source like :-
0CRM_BP_SALES_HIER
0BPARTNER_HIER
in the 0BPARTNER_HIER hierrachy, i didnt get the required data but in hierarchy 0CRM_BP_SALES_HIER there is the required data but when i executes the info package, it throws an error message of duplicate records. please tell me that how can i handle the duplicacy in the hierarchy. is there any data source for the table CRM_KNVH_TEMP so that i can directly use that Hierrachy DS for the info object
also let me know whether it is possible if i can use the data souce 0CRM_BP_SALES_HIER in the info object 0BPARTNER.
Thanks in advance
neha

Hi Pradeep,
Please also check the following link,
http://help.sap.com/saphelp_sm40/helpdata/EN/ab/bcc99b16db422e86af45b659712912/content.htm
Regards,
Amit

Need urgent help to generate SPL Data Sources for Line Items

Hi All,
I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource successfully.
But I am not able to generate the Line Items-DataSource. I am using the same procedure.
Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource from a ledger called ZP for which I am having trouble.
I would greatly appreciate if someone can get back to me ASAP.

During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
I hope I could explain the issue. Looking forward for some advice.

Looking suitable CRM data source for Marketing Plan & Campaign

Hi Experts,
I'm a BI guy & looking suitable CRM data source for Marketing Plan & Campaign.
and the related base tables from where it picks the data.
I saw two DS,
0CRM_MKTPL_CAUSAL                 Extraction of MDF Causal Data
0CRM_MKTPL_VO_TRANS               Vouchers Usage extraction
but not sure if it is correct one .
and also a DS 0CRM_SALES_ACT_I                  Activity Item
here business has created some test data for Market Plan & Campaign which i can see using Tcode crmd_order but could not able to see the same data in RSA3 from 0CRM_SALES_ACT_I .
Please hekp me.

got the solution!

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

Error generic data source for table VBAK in SAP R/3 7.01

Hi
When I was trying to create generate data source(RSO2) from table VBAK. The system replies that
Invalid extract structure template VBAK of Data Source ZSD_SALES
You tried to generate an extract structure with the template structure VBAK. This operation failed, because the template structure quantity fields or currency fields, for example, field ZZLFAMT refer to a different table.
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Regards
Anand Reddy

Hi,
use 2lis_11_vahdr instead.
But in addition, you need to create a view on vbak and the reference table/s of the keyfigure units, add the unit fields as well as all fields of vbak to the view and use the view for the generic datasource instead of the table.
Siggi
Edited by: Siegfried Szameitat on Oct 5, 2010 2:46 PM

Switch data sources for only 1 table?

Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
tables to use the main data connection, but can't figure out how?
My logical guess would be in the table properties, but that's not it.
Any ideas?
TIA, ChrisRDBA

Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
tables to use the main data connection, but can't figure out how?
My logical guess would be in the table properties, but that's not it.
Any ideas?
TIA, ChrisRDBA
Hello,
If your three data connections from different database, I don't think we can combine three data connections into one in Tabular model design surface. If you need to only use one data connection for your Tabular model, please try to combine your underlying
tables into one database.
Please point out if I have something misunderstood.
Regards,
Elvis Long
TechNet Community Support
Thanks Elvis. As stated above, all tables reside in one DB.
TIA, ChrisRDBA

Data Source for BSEG Data base table

Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.

Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards.

CRM 7.0 - Enhancement of Data Sources for interactive Reporting

Hallo All,
I would like to know whether anybody has positive experience with the enhancement of CRM Data Sources for interactive Reporting. I read that the enhancement of Customer fields should be possible (Those Data Sources below the Hierarchy node /CRMBW/ROOT).
I have seen that the extract structure can be enhanced via RSA6 (as for other data sources).
Questions:
1. Which USEREXIT / BADI has to be used to fill the added fields?
2. Does it work?
Best regards

Hi!
Those DS are not meant to be enhanced manually but only by one of the following two ways:
1. Adding custom fields with the Application Enhancement Tool (AET) in the CRM UI.
2. Adding SAP fields with the Interactive Reporting Enhancement Workbench (IREW).
The AET is available since CRM 7.0. Please find more details in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     WebClient UI Framework
                         Application Enhancement Tool
The IREW is available since CRM 7.0 EhP1. More details can be found inside TX CRMD_IREW or in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     SAP Customer Relationship Management
                         Analytics
Best regards

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

Help needed: Data source for Facilities management (tables VTB_ASGN*)?

Hi all,
I am looking for a data source for facilities management in R/3 (PI 2004_1_470)
The tables are concerning VTB_ASGN* etc.
every feedback is highly appreciated and rewarded.
Thanks and regards,
Sally

Hello Sally,
Did you ever find a solution to this issue?
My client is also looking to do reporting on facilities in BW and integrate this data into liquidity planning in SEM-BPS. However, it looks like this will have to be a custom extractor calling one of the two function modules either FTR_FC_GET_COMMITMENT or FTR_FC_GET_COMM_DRAW_FEE.
Gregory

Data source for crm table CRMD_ORDERADM_I

Similar Messages

Maybe you are looking for