Data source for deposit advice xml and check writer xml

Could someone please tell me where I can find the data source for the Deposit Advice XML and Check Writer XML programs. Since these executables are now a spawned process (PYUGEN), I don't know how to get to the data source. I was able before to look at the queries in PAYUSPST.rdf and PAYUSCHK.rdf. Where are these queries located now? Any help is appreaciated.

Hi All,
I applyied the patch 6399100 and i got the seeded Check Writer (XML) and Deposit Advice (XML) programs.Im able to run the Check Writer (XML) with Parameter (Check Style :Seeded Archive Check Writer Template ) but where as the im unable to run the Deposit Advice (XML) due to Error msg: "No enties found for list of vales"for the 'Check Style' Parameter.
And for the above (only for Deposit Advice) i am not able to ecexute the SQL script given in the Doc ID : 459306.1 due to the error msg : cannot insert NULL into ("HR"."PAY_REPORT_CATEGORIES"."REPORT_GROUP_ID") if i see query the select * from apps.pay_report_categories where short_name like 'ARCHIVE%' there is no record exixts for ARCHIVE_DEPOSIT....
for this we required any other patch/setups.
And is the "Third Pary Check" will support XML Publisher ??
Any respose will be greatly appriciated.
Thanks,
Madhu
Message was edited by:
user589951

Similar Messages

  • Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

    Hello All,
    We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
    As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
    Looking forward to your prompt help.
    Thanks,
    Rahul

    Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
    I attached a RTF template to the concurrent program to have the output in XML.
    When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
    I also tried looking into the XML generated through View XMl and there too no output file is generated.
    I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
    All pointers to this issue are welcome.
    Thanks,
    Rahul

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Looking suitable CRM data source for Marketing Plan & Campaign

    Hi Experts,
    I'm a BI guy & looking suitable CRM data source for Marketing Plan & Campaign.
    and the related base tables from where it picks the data.
    I saw two DS,
    0CRM_MKTPL_CAUSAL                 Extraction of MDF Causal Data
    0CRM_MKTPL_VO_TRANS               Vouchers Usage extraction
    but not sure if it is correct one .
    and also a DS 0CRM_SALES_ACT_I                  Activity Item
    here business has created some test data for Market Plan & Campaign which i can see using Tcode crmd_order but could not able to see the same data in RSA3 from  0CRM_SALES_ACT_I  .
    Please hekp me.

    got the solution!

  • ODS as data source for the next ODS - can't see the name in the DS list

    Hello, experts!
    Need your help.  I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS.   The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS  data source name either).  I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem. 
    Any suggestions?
    Thank you.
    Alina.

    OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
    In my system the screen can show more than 900... must be one of your user settings in the gui...
    just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
    In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
    Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
    hope this helps...
    Olivier.
    Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

  • Data source for the concurrent program 'Send Separate Remittance Advices'

    Hi All,
    We have requirement to develop a custom report to send the remittance to the vendors.
    But we are unable to figure out on how to get the data source for the standard program 'Send Separate Remittance Advices'.
    The program is of the type Java concurrent program. Is there any way to get the XML tags for this program.
    Thanks,
    Manoj

    hi,
    pls see:
    R12 Send Separate Remittance Advice - Data Source (srini)
    and also:
    http://apps2fusion.com/apps/14-fwk/69-java-concurrent-programs
    http://oracle.anilpassi.com/xml-publisher-concurrent-program-xmlp.html

  • Segments in Check Writer XML data source

    Hi,
    Can anyone tell me what are the Segments 1-10 in the XML data source that I see for Check Writer (XML) when I use "Third Party Checks". I tried populating few fields in the Entry values for the corresponding element but that didn't work.
    We need an additional field to populate some reference number that needs to be printed on the check and we would like to use one of these segments since it eliminates the customization.
    - <EMPLOYEE_THIRD_PARTY_PAYMENTS>
    <ORG_PAYMENT_METHOD_ID>63</ORG_PAYMENT_METHOD_ID>
    <PERSONAL_PAYMENT_METHOD_ID>103704</PERSONAL_PAYMENT_METHOD_ID>
    <CHECK_DEPOSIT_NUMBER>166986</CHECK_DEPOSIT_NUMBER>
    <SEGMENT1 />
    <SEGMENT2 />
    <SEGMENT3 />
    <SEGMENT4 />
    <SEGMENT5 />
    <SEGMENT6 />
    <SEGMENT7 />
    <SEGMENT8 />
    <SEGMENT9 />
    <SEGMENT10 />
    <PRE_PAYMENT_ID>4077062</PRE_PAYMENT_ID>
    <VALUE>151</VALUE>
    <PREPAYMENT_ASSIGNMENT_ACTION>1363042534</PREPAYMENT_ASSIGNMENT_ACTION>
    <ORG_PAYMENT_METHOD_NAME>TP Bethesda</ORG_PAYMENT_METHOD_NAME>
    </EMPLOYEE_THIRD_PARTY_PAYMENTS>

    Ok..found it. Those are the bank details.

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

    What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
    Please help me out.
    thanks,
    sapsdnhelp

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • XML data source for grid

    I am using web services to read an XML file that contains a schema.  I am using the input as the data source for a grid.  When the grid is populated it does not appear that the schema is interpreted.  All the decimal values are presented as strings and are not sorted correctly.  Is there something specific that I need to do to invoke the schema?

    Worst forums ever! Nobody can help with the insertion of a
    currencyvalidator in a datagrid itemeditor?

  • Can Discoverer be used as an XML Data source for XMLP ?

    I am wondering if Discoverer can generate an XML Data Source for XMPL.
    I have heard that Discoverer Viewer can have XML as an output. Is there a way of using this XML output with XMLP and, if yes, how to batch both steps ?

    Hi
    My understanding is that Discoverer does not generate XML data as an ouput that XMLP can consume. The XML is does generate is actually an XML RDF for Oracle Reports.
    XMLP is integrated thou, when you export your Disco report to PDF thats XMLP doing the conversion to PDF for you.
    Regards, Tim

  • How to find unsued Transfer Rules and Data Sources for a Master Table...??

    How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

    Hi
    Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
    Cheer
    Ans as expected, Please reward

  • Using an SAS2008 Cube as a data source for BI Publisher errors

    Hi All,
    I am trying to use a SAS 2008 cube as a data source for a report in BI Publisher. When I defined the data source under the admin section I gave it the following details:
    Data Source=ntsasqa01;Provider=msolap.3;Initial Catalog=WWPR_SMG
    With a username / password that has access to the cube.
    When I try and test the connection the OC4J instance stops running and the test does not finish or error. If I use the data source and then setup a report and then try and view data I get an error like the one below:
    /app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll (     0509-022 Cannot load module /app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll.
         0509-103 The module has an invalid magic number.)
    I am not sure if the error is related to the initial issue of not being able to complete the test.
    I need to find a solution though as I have to make use of MDX to access the cubes.
    Please could someone give me some advice.
    Thanks,
    Kim.

    Hi Kim
    1. SAS cubes are not currently supported - http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf. Unless SAS cubes can use the MS drivers?
    2. If you try and pursue it you might check the permissions on the ddll in the error to ensure you have rights over it.
    Either way you are not supported with a SAS cube so you are kinda on your own. Sorry I dont use SAS so Im not going to be much help other than stating the obvious :0)
    Regards
    Tim

  • How to change the jta-data-source for projects in EJB 3

    Hi all,
    Sorry my english! :)
    I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
    I explain:
    In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
    I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
    I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
    What kind of changes (workaround) I could make to solve this problem?
    Thanks a lot!
    Luciano

    Hi,
    There are COOM data source which may suits your needs.
    please check data source
    0CO_OM_WBS_6
    0CO_OM_WBS_3
    Base tables are COSP and COSS.
    Check about coom data source, if not suitable then go for custom data source.
    About table cross verify with your source team.
    Thanks

  • Using InfoSets as Data Source for segmentation

    Hi Experts,
    I'd like to use my own InfoSet as Data Source for segmentation.
    The goal is, for example:
    Select all BPs who have Leads (Just simple one to describe my question).
    So I've created new InfoSet which joined tables:
      CRMD_ORDERADM_H
      CRMD_LINK
      CRMD_PARTNER.
    The question is how should I restrict the InfoSet to use only object type "CRM Lead" (CRMD_ORDERADM_H = 'BUS2000108') and partner function "Activity partner" (CRMD_PARTNER-PARTNER_FCT = '00000009')?
    I've managed to do this by small addtitional coding in Record Processing in the InfoSet as:
    CHECK crnd_orderadm_h-object_type EQ 'BUS2000108'
      AND crmd_partner-partner_fct EQ '00000009'.
    But it seems that it's not the best way (and no the best practise's one) because all records from the joining are processed and for each of the record this conditions are checked.
    It'd be better, I think, to put this conditions as selection options. But it doesn't work (or I didn't do it properly). What I've done is: I've made them as selection criterions in my InfoSet and put default values for them. But segment builder didn't use them (default values) as I can see.
    Appreciated for your any advices.

    Hi Monica,
         Ofcourse query will be written by BW consultants but the requirement should be passed on by Business. CRM Functional Consultant responsibility is to understand the Business requirement and should guide BW consultants. Also make sure that BW system is in the CRM landscape for such requirement.
    regards
    KK

Maybe you are looking for