Data source for ECMCT table

hi,
    can some one tell me the data source we should use for extracting data from ECMCT table?
the potential data source we identified is 3EC_CS1A but there is no documentation available on this data source.
could you documentation provide us the supporting docs or note no?
thanks in advance!!!
NA

Hi Samir,
welcome on board !
Take a look here:
http://help.sap.com/saphelp_nw04/helpdata/en/6c/4d6637a04c2367e10000009b38f8cf/content.htm
Hope it helps!
(and please don't forget to reward the answers..it's a way to say thanks !)
Bye,
Roberto

Similar Messages

  • Data source for crm table CRMD_ORDERADM_I

    hi experts,
    could you please tell me the standard data source for crm table CRMD_ORDERADM_I ?
    Thanks a lot!

    Hi,
    There would be many data sources based on this table CRMD_ORDERADM_I.
    Example.
    Opportunity Item Attributes - 0CRM_OPPT_ATTR_I
    Bids - 0BBP_TD_QUOT_1
    Depends What exactly are you looking for.
    Regards,
    Joe

  • Standard Data Source for FMGLFLEXT Table

    Hello Friends,
    The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
    Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
    Appreciate help in this regard.
    VB

    Hello Sasi and Kirun,
    Thanks for your reply,
    The requirement is resolved by the following:
    If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
    http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
    Regards,
    VB

  • BW data source for R3 table glpcp

    Hi BW folks,
    I would like to create a data source in BW for table glpcp.  Does anyone know of an existing one that I could use?
    Kind regards,
    Cheryl

    Hi Abhijit,
    The table glpcp table exists in R3. It contains PCA planned line items.  and is a detail file.  Glpct is the summary level table and has corresponding data source 0ec_pca_1. 
    Kind regards,
    Cheryl

  • Data Source for Table CRM_KNVH_TEMP

    Hello Experts,
    I have an issue related to the Hierarchy of Partner number. I have checked the data source like :-
    0CRM_BP_SALES_HIER
    0BPARTNER_HIER
    in the 0BPARTNER_HIER hierrachy, i didnt get the required data but in hierarchy 0CRM_BP_SALES_HIER there is the required data but when i executes the info package, it throws an error message of duplicate records. please tell me that how can i handle the duplicacy in the hierarchy. is there any data source for the table CRM_KNVH_TEMP so that i can directly use that Hierrachy DS for the info object
    also let me know whether it is possible if i can use the data souce 0CRM_BP_SALES_HIER in the info object 0BPARTNER.
    Thanks in advance
    neha

    Hi Pradeep,
    Please also check the following link,
    http://help.sap.com/saphelp_sm40/helpdata/EN/ab/bcc99b16db422e86af45b659712912/content.htm
    Regards,
    Amit

  • Need urgent help to generate SPL Data Sources for Line Items

    Hi All,
    I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
    Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource   successfully.
    But I am not able to generate the Line Items-DataSource. I am using the same procedure.
    Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource  for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource  from a ledger called ZP for which I am having trouble.
    I would greatly appreciate if someone can get back to me ASAP.

    During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
    Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
    I hope I could explain the issue. Looking forward for some advice.

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • Error generic data source for table VBAK in SAP R/3  7.01

    Hi
    When I was trying to create  generate data source(RSO2) from table VBAK. The system replies that
    Invalid extract structure template VBAK of Data Source ZSD_SALES
    You tried to generate an extract structure with the template structure VBAK. This operation failed, because the template structure quantity fields or currency fields, for example, field ZZLFAMT refer to a different table.
    Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
    Regards
    Anand Reddy

    Hi,
    use 2lis_11_vahdr instead.
    But in addition, you need to create a view on vbak and the reference table/s of the keyfigure units, add the unit fields as well as all fields of vbak to the view and use the view for the generic datasource instead of the table.
    Siggi
    Edited by: Siegfried Szameitat on Oct 5, 2010 2:46 PM

  • Switch data sources for only 1 table?

    Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
    tables to use the main data connection, but can't figure out how?
    My logical guess would be in the table properties, but that's not it.
    Any ideas?
    TIA, ChrisRDBA

    Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
    tables to use the main data connection, but can't figure out how?
    My logical guess would be in the table properties, but that's not it.
    Any ideas?
    TIA, ChrisRDBA
    Hello,
    If your three data connections from different database, I don't think we can combine three data connections into one in Tabular model design surface. If you need to only use one data connection for your Tabular model, please try to combine your underlying
    tables into one database.
    Please point out if I have something misunderstood.
    Regards,
    Elvis Long
    TechNet Community Support
    Thanks Elvis. As stated above, all tables reside in one DB.
    TIA, ChrisRDBA

  • Data Source for BSEG Data base table

    Hi Every one,
    I need to create a data source for the data base table BSEG (Function Module Extraction).
    I have followed below steps.
    I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
    If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
    So Could you please explain me how to extract currency fields.

    Hi,
    Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
    0FI_GL_4
    http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
    0FI_GL_14
    http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
    To use 0FI_GL_14, you should use the new GL in ECC side.
    On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the  the currency field, you will see the ref. field, give the reference unit field in this area.
    Regards.

  • How to find unsued Transfer Rules and Data Sources for a Master Table...??

    How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

    Hi
    Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
    Cheer
    Ans as expected, Please reward

  • Help needed: Data source for Facilities management (tables VTB_ASGN*)?

    Hi all,
    I am looking for a data source for facilities management in R/3 (PI 2004_1_470)
    The tables are concerning VTB_ASGN* etc.
    every feedback is highly appreciated and rewarded.
    Thanks and regards,
    Sally

    Hello Sally,
    Did you ever find a solution to this issue?
    My client is also looking to do reporting on facilities in BW and integrate this data into liquidity planning in SEM-BPS. However, it looks like this will have to be a custom extractor calling one of the two function modules either FTR_FC_GET_COMMITMENT or FTR_FC_GET_COMM_DRAW_FEE.
    Gregory

  • Standard BI Data Source for FMGLFLEXT

    Hello Friends,
    The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
    Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
    Appreciate help in this regard.
    VB

    Hello,
    The requirement is resolved by the following:
    If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
    http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
    Regards,
    VB

  • How to create the generic data source for Labour costs report in BI (actual& plan costs)?

    Hello Guru's
    My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
    I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
    Please help on this to going forward.

    Hi,
    There are COOM data source which may suits your needs.
    please check data source
    0CO_OM_WBS_6
    0CO_OM_WBS_3
    Base tables are COSP and COSS.
    Check about coom data source, if not suitable then go for custom data source.
    About table cross verify with your source team.
    Thanks

  • Can you use SQL as a data source for a project in the same way you can in Excel?

    Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
    the data from the stored procedure as a series of tasks?
    Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
    it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

    No, You can not use sql as a data source for a project.
    You have 3 options to achieve it:
    1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
    2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
    3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
    create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
    kirtesh

Maybe you are looking for