Data source for new FIGL

Hi:
I generated the data source for the totals records of FIGL( new ).
But how to get the data source for line items?
Should I still use the 0FI_GL_4 for that?
Thanks.
Eric

N0 you need to create ur own generic datasource for line items - it is not delivered.
0FI_GL_4 reads BSEG and BKPF
where as the new Gl line items is based on table FAGLFLEXA

Similar Messages

Data Source for NEW GL extraction

Hi Experts,
I have to load the data from ZTable, Flex, BKPF tables. Most the fields which I want to extract those are available in 0FI_GL_4 but I have heard this is not useful with New Ledger set up.
Please suggest me how could I extract the data from these tables.
Thanks,
Kumar

its the not the fileds that play an important part in the extraction, rather the concerned table the datasource is extracting from. Try to extract data thru the gl4 datasource is if the numbers reconcile with the expected result. If not you might need to consider FAGLFLEXA(line items) or FAGLFLEXT(totals).
0FI_GL_4 is not a suitable datasource for the new ledger. Infact the new ledger doesnt have a delievered datsource for line items. It does have a datasource for totals, see if that might of use to you.
If that doesnt suit you would need to develop a generic extractor to extract from the ur tables or FAGLFLEXA.
for further discussions on this, ceck this thread:
New GL Line Item Extraction

Standard BI Data Source for FMGLFLEXT

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Standard Data Source for FMGLFLEXT Table

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello Sasi and Kirun,
Thanks for your reply,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP

Hi BW Guru's
We have install the Standard Data Targets from Business Content. Now i want to do the same for Master Data can any one help me in selecting the relevant master data data sources for the following Data Targets.
Your help will be appreciated.
FI-GL
INFOCUBE    0FIGL_C01    General Ledger: Transaction Figures
INFOCUBE    0FIGL_C02    Cost of Sales Ledger: Transaction Figures
INFOCUBE    0FIGL_VC1    General Ledger: Financial Statements
INFOCUBE    0FIGL_VC2    Cost of Sales Ledger:Financial Statements
INFOCUBE    0FIGL_C10    General Ledger (New): Transaction Figures
INFOCUBE    0FIGL_R10    General Ledger (New): Transaction Figures Remote
INFOCUBE    0FIGL_V10    G/L (New): Balance Sheet and Profit and Loss
INFOCUBE    0FIGL_V11    G/L (New): Balance Sheet and Profit and Loss Remote
FI-AP
INFOCUBE    0FIAP_C02    FIAP: Transaction Data
INFOCUBE    0FIAP_C03    FIAP: Line Item
Thanks in Advance,
Ganni

AC --> AC-IO -
                                    All DataSources
FI --> FI-IO -
                                    All DataSources
FI --> FI-AR --> FI-AR-I0 -
                    All DataSources
FI --> FI-AR -
                                     0FI_AR_4, 0FI_AR_10,0FI_AR_6
FI --> FI-AP --> FI-AP-I0 -
                     All DataSources
FI --> FI-AP -
                                     0FI_AP_4, 0FI_AP_6
FI --> FI-GL --> FI-GL-I0 -
                     All DataSources
FI --> FI-GL -
                                     0FI_GL_10
LO--> LO-IO -
                               All DataSources
SD--> SD-IO -
                                     All DataSources
SAP-R/3-IO -
                                     All DataSources
PI-BASIS--> 0CA_GD --> 0CA_GD-IO ---     All DataSources

Line Items Data Source for General Ledger

Hello everybody,
I'm trying to generate a Data Source for Line Items (new General Ledger) in transaction FAGLBW03. When I generated a Total Record-Data Source, everything was done correctly. When I try to generate a Line Item-Data Source, I receive following error message: "Extractors for general ledger documents are not yet supported". I was looking for any SAP notes that would explain this issue, but I couldn't find anything.
Could you please tell me how can I generate Data Source for Line Items? Add some SP, use some another transaction, ...?
Thank you for any help
Janule

Hi,
Can u tell me how did u solve that problem.
i m facing same.
/sachinkumar.

Data source for SQR reporting

Is it possible to use the Brio Query or Report Results as a data source for an SQR report? Instead of accessing a database for an SQR, can I use the Results section instead?

N0 you need to create ur own generic datasource for line items - it is not delivered.
0FI_GL_4 reads BSEG and BKPF
where as the new Gl line items is based on table FAGLFLEXA

How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

Using InfoSets as Data Source for segmentation

Hi Experts,
I'd like to use my own InfoSet as Data Source for segmentation.
The goal is, for example:
Select all BPs who have Leads (Just simple one to describe my question).
So I've created new InfoSet which joined tables:
CRMD_ORDERADM_H
CRMD_LINK
CRMD_PARTNER.
The question is how should I restrict the InfoSet to use only object type "CRM Lead" (CRMD_ORDERADM_H = 'BUS2000108') and partner function "Activity partner" (CRMD_PARTNER-PARTNER_FCT = '00000009')?
I've managed to do this by small addtitional coding in Record Processing in the InfoSet as:
CHECK crnd_orderadm_h-object_type EQ 'BUS2000108'
AND crmd_partner-partner_fct EQ '00000009'.
But it seems that it's not the best way (and no the best practise's one) because all records from the joining are processed and for each of the record this conditions are checked.
It'd be better, I think, to put this conditions as selection options. But it doesn't work (or I didn't do it properly). What I've done is: I've made them as selection criterions in my InfoSet and put default values for them. But segment builder didn't use them (default values) as I can see.
Appreciated for your any advices.

Hi Monica,
Ofcourse query will be written by BW consultants but the requirement should be passed on by Business. CRM Functional Consultant responsibility is to understand the Business requirement and should guide BW consultants. Also make sure that BW system is in the CRM landscape for such requirement.
regards
KK

Data source for fixed assets

Hello All,
I would like to know what is the new version of data source for fixed assets. I believe it is 0FI_AA_20. But, this data sources has less number of fields compared to the old version data sources viz. 0FI_AA_11.
Which data source is presently being used widely. Is IT 0FI_AA_20 or is it 0FI_AA_11. If so, for what reason?
In case you are using old version data source viz. 0FI_AA_11, how did you justify to the client that 0FI_AA_11 is the appropriate data source.
Regards.
Shanker Ramabhotla

Hi Lokesh,
Thanks for your reply.
We have already implemented the notes in our development vut it did not help. It looks like we have a problem with the extractor checker too. I ran the extractor checker today but the total record count is exceeding the records in there.
If anyone has faced a similar situation with this particular data source, then please provide me valuable inputs.
Any help would be greatly appreciated.
Thanks,
Vinay

Data Source for BSEG Data base table

Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.

Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards.

Data source for new FIGL

Similar Messages

Maybe you are looking for