Data Source for Notofication Items 1.2B-2.0A (0QM_C03)

Hi
I have to activate and load the Cube Notofication Items 1.2B-2.0A (0QM_C03) as a part of Busness Content Activation for PM/QM.
SAP Help says that the data will be loaded from the InfoSources 2LIS_05_S292 and 2LIS_07_S296 (Transaction data for notification items), but there are no Data Sources available for these InfoSources in the Business Content.
Does anybody know ow to get the data for these Infosources or for this InfoCube?
TIA
Abhishek

Go to tcode RSA5 in R/3.  Those datasources are no longer in use.  Use 2LIS_05_Qxxxxxx.  The datasources you listed were broken up into these datasources awhile back.  
Not sure why you need to use the old 1.2B/2.0A stuff since it is about 9 years old and obsolete.
Brian

Similar Messages

  • Need urgent help to generate SPL Data Sources for Line Items

    Hi All,
    I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
    Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource   successfully.
    But I am not able to generate the Line Items-DataSource. I am using the same procedure.
    Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource  for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource  from a ledger called ZP for which I am having trouble.
    I would greatly appreciate if someone can get back to me ASAP.

    During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
    Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
    I hope I could explain the issue. Looking forward for some advice.

  • Line Items Data Source for General Ledger

    Hello everybody,
    I'm trying to generate a Data Source for Line Items (new General Ledger) in transaction FAGLBW03. When I generated a Total Record-Data Source, everything was done correctly. When I try to generate a Line Item-Data Source, I receive following error message: "Extractors for general ledger documents are not yet supported". I was looking for any SAP notes that would explain this issue, but I couldn't find anything.
    Could you please tell me how can I generate Data Source for Line Items? Add some SP, use some another transaction, ...?
    Thank you for any help
    Janule

    Hi,
    Can u tell me how did u solve that problem.
    i m facing same.
    /sachinkumar.

  • Data source for new FIGL

    Hi:
    I generated the data source for the totals records of FIGL( new ).
    But how to get the data source for line items?
    Should I still use the 0FI_GL_4 for that?
    Thanks.
    Eric

    N0 you need to create ur own generic datasource for line items - it is not delivered.
    0FI_GL_4 reads BSEG and BKPF
    where as the new Gl line items is based on table FAGLFLEXA

  • In 4.1 BO Client Tools not able to find data source  for BVM

    Hi All,
    In 4.1 BO Client Tools not able to find data source  for BVM
    Its creating issue .
    So if any body have any solution please let me know.
    Regards,
    Abhishek

    java.lang.NoSuchMethodError: org.w3c.dom.Node.getTextContent()Ljava/lang/String;
         at customertree.XmlLoader.readData(XmlLoader.java:127)
         at customertree.XmlLoader.<init>(XmlLoader.java:69)
         at customertree.CustomerTreeFinal.jbInit(CustomerTreeFinal.java:240)
         at customertree.CustomerTreeFinal.init(CustomerTreeFinal.java:858)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source
         at java.lang.Thread.run(Unknown Source)and then inside the code... this is where i get my first error
    clients.setRowId(list2.item(i).getTextContent());

  • Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP

    Hi BW Guru's
    We have install the Standard Data Targets from Business Content.  Now i want to do the same for Master Data can any one help me in selecting the relevant master data data sources for the following Data Targets.
    Your help will be appreciated.
    FI-GL
    INFOCUBE    0FIGL_C01    General Ledger: Transaction Figures   
    INFOCUBE    0FIGL_C02    Cost of Sales Ledger: Transaction Figures   
    INFOCUBE    0FIGL_VC1    General Ledger: Financial Statements   
    INFOCUBE    0FIGL_VC2    Cost of Sales Ledger:Financial Statements   
    INFOCUBE    0FIGL_C10    General Ledger (New): Transaction Figures   
    INFOCUBE    0FIGL_R10    General Ledger (New): Transaction Figures Remote   
    INFOCUBE    0FIGL_V10    G/L (New): Balance Sheet and Profit and Loss   
    INFOCUBE    0FIGL_V11    G/L (New): Balance Sheet and Profit and Loss Remote   
    FI-AP
    INFOCUBE    0FIAP_C02    FIAP: Transaction Data   
    INFOCUBE    0FIAP_C03    FIAP: Line Item   
    Thanks in Advance,
    Ganni

    AC --> AC-IO -
                                        All DataSources
    FI -->  FI-IO -
                                        All DataSources
    FI -->  FI-AR --> FI-AR-I0 -
                        All DataSources
    FI --> FI-AR -
                                         0FI_AR_4, 0FI_AR_10,0FI_AR_6
    FI --> FI-AP --> FI-AP-I0 -
                         All DataSources
    FI --> FI-AP -
                                         0FI_AP_4, 0FI_AP_6
    FI --> FI-GL --> FI-GL-I0 -
                         All DataSources
    FI --> FI-GL -
                                         0FI_GL_10
    LO--> LO-IO -
                                   All DataSources
    SD--> SD-IO -
                                         All DataSources
    SAP-R/3-IO -
                                         All DataSources
    PI-BASIS--> 0CA_GD --> 0CA_GD-IO ---     All DataSources

  • Data source for SQR reporting

    Is it possible to use the Brio Query or Report Results as a data source for an SQR report? Instead of accessing a database for an SQR, can I use the Results section instead?

    N0 you need to create ur own generic datasource for line items - it is not delivered.
    0FI_GL_4 reads BSEG and BKPF
    where as the new Gl line items is based on table FAGLFLEXA

  • Stored Procedure used as a data source for an Apex report

    Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
    Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ?
    Thank you.

    >
    Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "920338".
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
    Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ? When asking a question about "reports" it's firstly essential to differentiate between standard and interactive reports. Standard reports can be based on tables, views, SQL queries, or PL/SQL function blocks that return the text of a SQL query. Interactive reports can only be based on a SQL query.
    "Stored Procedures" are therefore not an option (unless you are using the term loosely to describe any PL/SQL program unit located in the database, thus including functions). What would a procedure used as the source of a report actually do? Hypothetically, by what mechanisms would the procedure (a) capture/select/generate data; and (b) make this data available for use in an APEX report? Why do you want to base a report on a procedure?

  • Data source for crm table CRMD_ORDERADM_I

    hi experts,
    could you please tell me the standard data source for crm table CRMD_ORDERADM_I ?
    Thanks a lot!

    Hi,
    There would be many data sources based on this table CRMD_ORDERADM_I.
    Example.
    Opportunity Item Attributes - 0CRM_OPPT_ATTR_I
    Bids - 0BBP_TD_QUOT_1
    Depends What exactly are you looking for.
    Regards,
    Joe

  • Looking suitable CRM data source for Marketing Plan & Campaign

    Hi Experts,
    I'm a BI guy & looking suitable CRM data source for Marketing Plan & Campaign.
    and the related base tables from where it picks the data.
    I saw two DS,
    0CRM_MKTPL_CAUSAL                 Extraction of MDF Causal Data
    0CRM_MKTPL_VO_TRANS               Vouchers Usage extraction
    but not sure if it is correct one .
    and also a DS 0CRM_SALES_ACT_I                  Activity Item
    here business has created some test data for Market Plan & Campaign which i can see using Tcode crmd_order but could not able to see the same data in RSA3 from  0CRM_SALES_ACT_I  .
    Please hekp me.

    got the solution!

  • Unable to generate "Export data source" for Master data infoobject

    Hi Gurus,
    I'm in BW 3.5
    I need to generate "Export data source" for a master data info object.
    I followed below steps:
        I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
        In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource  was successful"
    Problem:
    Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
    Could anyone please help ????
    Thanks,
    Venkat

    Hi Venkat,
    I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
    However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
    If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
    Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
    -Vikram

  • Standard BI Data Source for FMGLFLEXT

    Hello Friends,
    The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
    Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
    Appreciate help in this regard.
    VB

    Hello,
    The requirement is resolved by the following:
    If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
    http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
    Regards,
    VB

  • Standard Data Source for FMGLFLEXT Table

    Hello Friends,
    The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
    Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
    Appreciate help in this regard.
    VB

    Hello Sasi and Kirun,
    Thanks for your reply,
    The requirement is resolved by the following:
    If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
    http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
    Regards,
    VB

  • Can you use SQL as a data source for a project in the same way you can in Excel?

    Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
    the data from the stored procedure as a series of tasks?
    Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
    it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

    No, You can not use sql as a data source for a project.
    You have 3 options to achieve it:
    1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
    2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
    3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
    create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
    kirtesh

  • S_ALR_87012168 - Due Date Analysis for Open Items - How to add a column?

    Hello,
       I am trying to add a characteristic to the output of this report. I am trying to add the Reference field from BKPF to the list of available characteristics to choose from. It is available in the dynamic selections list so the field should be available in the program, I am just not sure how to get it onto the char. list.
    S_ALR_87012168 - Due Date Analysis for Open Items
    Any help would be greatly appreciated!

    Sorry but had to go in a different direction...
    Thanks!

Maybe you are looking for