Data source inactive in the quality system

Hi all,
I transported R/3 datasource from DEV to QA and replicated datasource in to BWQ but the datasource in QA is inactive eventhough it is in active mode in R/3 QA system. When I checked the RSOLTPSOURCE  table there is no entry for my datasource. When i try to transport the transfer rules it is giving error 'DataSource xxxxxxxx does not exist in source system XYZ of version A'. How to activate the datasource in BW quality system.
Could any one help me to resolve this issue.
Thanks in advance.
Mandadi

Hi,
Firstly nly the active data sources in the source system will be available for useing in the bw.
R/3 check whether the datasource is active or not. If not active activateit.
If active , on the bw side replicate that particular datasource. and activate it again through program <b>RS_TRANSTRU_ACTIVATE_ALL</b>
Hope this helps
Janardhan Kumar

Similar Messages

  • Transporting a Data Source and Hierachie to the Quality System

    Hello,
    i have following problem.
    I want to transport a  generic data source from our development system into the quality system.
    In the development system the hierachie looks like
    New-Hierroot
    ->CO
        ->ABB
             ->Datasource ABB
    When i transport the data source into the quality system the hierache looks
    New Hierroot
    ->Nodesnotconnected
      ->CO
          ->ABB
               ->Datasource ABB
    How can i solve this problem? Transaction rsa9? We dont have business content on our r/3 systems and iam not allowed to change such settings...??
    Thank you greetings

    i don't understand that exarctly.
    Transport connectionscreen is se09? (what transaction is that?)
    and whatis a dev to Q mapping
    Sorry iam new..
    Message was edited by:
            Katsumoto

  • Unable to load the data into Cube Using DTP in the quality system

    Hi,
    I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
    I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
    Please suggest .
    Thanks,
    Satyaprasad

    Hi,
    Some Infoobjects are missing while collecting the transport.
    I collected those objects and transported ,now its working fine.
    Many Thanks to all
    Regards,
    Satyaprasad

  • Change master data of business consolidation directly in the quality system

    Dear All,
    I need to change master data of business consolidation directly in the quality system.
    Anyone an idea?
    Kind regards,
    Marilia

    Welcome to SDN.
    There are SAP Notes 933024, 804057 and 592239 that provide a means of opening UCWB only for master data objects.
    Another possible work around is to make the updates in BW and use the synchronization programs UGMDSYNC and UGMDSY20. However for FS Items and Cons Groups all of the master data elements such as breakdown category and period of first consolidation are not available for entry in BW so for these characteristics the maintenance must still be completed in UCWB.
    Edited by: Dan Sullivan on Jan 4, 2011 10:59 PM

  • PSGUID Field in the Hide in the Quality System,Unhide in Dev System

    Hi all,
    We have applied note 929584 to get the GUID filed in the Standared extractors.
    That is perfectly applied & we have tested in BW development & R/3 Dev.
    same request we have trasported to Quality system but in some data sources GUID , CPR_GUID & OBSNR fields are in the HIDE .
    I have done the following things:
    1. I have checked in RSA2 of Quality system those filelds are "Fileds to be trasfered" check box is unchecked *( But not in DEV)
    2.RSA6 also those filed are with HIDE Check box ( But not in DEV).
    3. I have reactivated the datasources in DEV sytem once agin & Retrasported but still those fileds are in the same situation.
    So please suggest me How I have to unhide these fileds in the Quality System.
    Please suggest me.
    Thanks,
    Kiran Manyam
    Edited by: kiran manyam on Apr 1, 2009 11:03 AM

    Hi Rajiv,
    Thank you very much for the quick reply. I created an entity adapter and did things as you said .. But start date field is not getting pre populate. what i want is once the user clicks on the "Users -- > Create" link create user page should loaded and system date need to be shown as the start date..
    For an example in create user page 'change password at next logon' chek box is already checked(prepopulated) once the create user page is loading. Likewise what i want is when user creation page is loading display the current system date as the start date..
    I think now my problem is clear to you..
    will it be possible to do.. can you please help on that....
    Regards,
    i.k.

  • What actions should be taken while working with  the quality system

    Hi all,
    The development phase has been completed, I would like to know what are the steps we need to follow when we are working with  the quality system.
    I have some doubts regarding this could any one give the inputs please.
    1. Where should we create any Roles and Authorizations.Dev/QA/Prd
    2. Where should we  craete process Chains. Dev/QA/Prd.
    3. Can I transport the queries without using  Bex transport. What will happen If i dont use the Bex transport.
    Thanks in Advance
    Regards
    Kumar

    Hi Kumar,
    your BW quality system will be connected to your R/3 Production system from where you'll extract the real time data and do testing which includes estimation of downtime in case of filling up of the set up tables and so on...
    the most general procedure is to create the Roles and Authorizations in teh development system and then transport it across to production through your quality system...
    Process chains you afford to create it directly in your production system itself... that's no big deal...
    And of course, you'll have to transport the queries only using the BEx transport.. there's no other go for this as its the standard procedure given by SAP...
    Hope it helps..
    Regards
    Manick

  • SMSY Data Source changes after performing Managed System Config

    Hello everyone,
    I am working with Solman EHP1 SPS26.  I have setup up my central SLD to push system data to my Solman local SLD which is then retrieved from Landscape Fetch to SMSY.  Initially, everything seemed to be working and all data sources reported SLD.
    However, once I performed the Managed System Confirguration wizard for a particular technical system, that systems data source would change to TMS/RFC under SMSY.  It's actually not even that consistent.  For example, the server says source is RFC, the product system says TMS/RFC and some of the product instances still say SLD.
    Is this normal for this to happen after connecting a managed system?  Will these systems still be updated via the SLD considering SMSY_SETUP is configured to use the SLD?
    Anyone's help would be greatly appreciated.
    Alex

    Hello,
    If you notice in SMSY this is not an editable field.
    It is reporting the last datasource used.
    Thefore when you made a change via managed system setup that became the last data source used.
    So yes it is normal to see this change.
    If you have configured the datasource to be the SLD, it should continue to update these systems.
    Where you need to watch out is making manual changes in SMSY, as the SLD can view this as a different system to the SID it knows and will generate systems with known SIDs appended with a suffix variable to distinguish it, as the SLD will not overwrite manual changes, and will create new systems instead.
    But the field in SMSY reflects the last data source used.
    Hope this helps some.
    Regards,
    Paul

  • 0EC_PCA_3 does not return data in RSA3 if the target system is entered

    Hello all,
    Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
    Datasource 0EC_PCA_1 works fine for the same target system.
    There is one thread dealing with the same problem but the person does not provide the solution he found.
    Does anyone know what the issue is?
    Regards and thanks,
    József.

    The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.

  • How to change the Data sources after deploying the application ??

    Hi All,
    i want to know how to change the Data sources after deploying the application to the application server ???
    I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

    Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

  • Data source properties for the rulefiles.

    Could some one explain what is the use of field edits like move/split/join/create of data source properties for the rulefiles.

    move/split/join/create are very useful loading data without going back to source file and changing them. For example
    you have an entity dimension with member names like
    east10569
    east10658
    if you want to add a prefix for these members to make them unique, you can use those field edits.
    the other uses which I saw is concatination to create unique names etc.
    hope this helps

  • How to findout the data source information for the perticular tables

    Hi,
    Can you please tell me the process to findout the data source information for the perticular tables .
    For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
    I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
    Thanks.

    Hi,
    Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
    I have searched in help.sap.com but I didn't find any information on this .
    Please let me know is there any way to know the data source details for SAP Tables.
    Thanks

  • What is the data source name and the data target name for the table COSP

    Hi,
    Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
    in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
    here we are using all the business content extractors and BI content cubes and odss.
    please reply immediately as its very jurgent isssue.
    Thanks,
    ashok

    answered

  • Requirement 607 does not work in the Quality System

    Hi,
    I have the following problem. We have transported the entire developed applications from Development System to the Quality System.
    Maintained one output type through T-code MN04. The self created requirement 607(output control) doesn't take
    any effect in the Quality System. I have set a breakpoint in the code (within Requirement 607 coding) it doesnt
    stop there. Clearly said it does not work similar as in the Development System. There is everything OK.
    Did you ever come into across with such a problem. Please help me on this topic.
    Friendly Regards
    Marco

    Hello Marco
    I had once a very similar problem like yours and it was indeed due to a problem of generating these odd exits as described by Roger.
    The SAP note which helped to solve the problem was: [Note 28683 - PERFORM_NOT_FOUND: VOFM routine is not active|https://service.sap.com/sap/support/notes/28683]
    Regards
      Uwe

  • Failed to acquire DAS with data sources that match the specified OCE

    Please help, Thank you all.
    We are migrating Oracle databases from Windows to Linux servers. Currently, I have no problem to use my desktop Hyperion Intelligence Designer 8.5 with new oce file to connect to Linux. However, I published the same oce file to Hyperion Performance Suite 8.5 then I got “Sever Error [2018]: Failed to acquire Data Access Service with data sources that match the specified OCE”.
    I launched Service Configurator, in the “Local Service Configurator - DAS1_host”, the “Database JDBC URL is point to Linux server. Also, I added ODBC connection to Oracle database on Linux in the “Properties of Data Access Service: DAS1_host’s Data Source”. Database of JDBC URL in BI1_host, AZ1_host, PUB1_host, SM1_host, LS1_host, UT1_host, BPS1_host, AN1_host are also point to Linux server.
    The “Remote Service Configurator” has ES1_host’s” Storage” with JDBC URL point to Linux server. The same for RM1_host’s and NS1_host’s “Storage” with JDBC URL point to Linux server.
    Is there some missing configuration on the server? Thank you in advance.

    You should login to my oracle support to look into this ID.
    This is the solution mentioned
    Solution
    1) In the .profile file, you will find the definition of the LD_LIBRARY_PATH variable. However, the path to 64 bit libraries is probably appended before the path to the 32 bit libraries(%ORACLE_HOME%/lib32). Therefore, please reverse the order in the definition so that the 32 bit libraries get loaded before the 64 bit libraries.
    Then, restart all services.
    2) Oracle 9.2 was the first Oracle release which defaults to using the 64 bit libraries in the 'lib' directory and the 32-bit libraries that we need are in the 'lib32' directory.
    Therefore, please have the%ORACLE_HOME%/lib32 placed in front of the LD_LIBRARY_PATH environment variable definition.Then, restart all services.
    3) Please check that users have read and write access to the files located in the %ORACLE_HOME%/lib32 folder.
    4) Check the permissions of the libclntsh.a file(located in the %ORACLE_HOME%/lib32 folder) are set to rwxr-xr-x
    5) Recreate the OCE connection in DAS and restart DAS in CMC.
    6) Restart all the BIPlus Services and process the query.

  • Probelms while replicating Data Source and transport into test system

    I find  the following error messages whilre transporting into test system.
    DataSource 0EC_PCA_1 does not exist in source system of version A.
    Mapping between data source 0EC_PCA_1 and source system  is inconsistent.
    DataSource 0EC_PCA_1 does not exist in source system  of version A.
    Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
    any ideas please..........
    Enhanced the Extract structure and activated the data source in Source system
    Replicate the Data source in BI  and install the Infosource through BI Content  activated and transport them to Test system.

    Hi,
    1.First transport the data source from R/3 dev to R/3 quality
    2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you  data source may not appear)
    3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
      activate these info objects and collect in another request
    4.transport these info objects from BI dev to  BI quality
    5.transport entire data source to bw quality.
    Thanks,
    Tarun Brijwani.
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Maybe you are looking for