Data Source Limitation for Selectors

I have built a dashboard, which has about ~900 rows and 254 columns of data when I use a filter or an accordion menu as my selector the component will not allow the Source Data range to exceed 215 rows. .
For a filter when selecting the data source Xcelsius thinks about it for a while and then when it frees up the data source field is blank. For the accordion menu the file crashes after I've exceeded so many lines of data.
I am using Xcelsius2008 SP3.

Hi,
This is the Xcelsius SDK forum so I will move this over to the Xcelsius forum.
Try to design your dashboard with high level pre-aggregated data (see the [best practices|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a084a11c-6564-2b10-79ac-cc1eb3f017ac]), 900 rows is quite a lot but 254 columns is the bigger issue here.
Regards
Matt

Similar Messages

What are the Non SAP data sources supported for Analysis workbooks?

AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.

HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

Data source value for data source reportData was null

hi i'm using struts 2 and jasperreports my problem is
it generate a pdf file with labels but no data in it..
and when i try to look at the logs of my sun application server
it says Data source value for datasource reportData was null.
reportData is an ArrayList of Personnel object.
here is my code..
public class EIS_HR_004_JASPER extends eisSupport {
    private String reportId;
    private String dateStart = null;
    private String dateEnd = null;
    private String pdfFile;
    private final static String _REPORT_FOLDER = "EIS_HR_003";
    private Report thisReport;
    private String dateRange;
    private ArrayList<Personnel> reportData;
    public String execute(ActionMapping mapping,ActionForm form,
            HttpServletRequest request, HttpServletResponse response)
            throws Exception {
        ReportBean reportBean = new ReportBean();
        setThisReport(reportBean.getReport(getReportId()));
        reportData=new ArrayList<Personnel>();
        Personnel p1=new Personnel();
        p1.setSurname("Dela Cruz");
        p1.setFirstname("Juan");
        p1.setExamcode("CSC111");
        p1.setExamdate("January 1,2003");
        Personnel p2=new Personnel();
        p2.setSurname("Cruz");
        p2.setFirstname("Miguel");
        p2.setExamcode("CSC222");
        p2.setExamdate("December 2,2003");
        reportData.add(p1);
        reportData.add(p2);
     try {
          JasperCompileManager.compileReportToFile(
                    "apps/reports/templates/hr004.jrxml",
                    "apps/reports/templates/hr004.jasper");
     } catch (Exception e) {
          e.printStackTrace();
          return ERROR;
         return SUCCESS;
    public ArrayList<Personnel> getReportData() {
       // setReportData();
        return reportData;
    here is part of my struts.xml
<action name="EIS-HR-004_JASPER" class="eis.report.EIS_HR_004_JASPER">
            <result name="error">/apps/reports/ReportNotFound.jsp</result>
            <result name="success" type="jasper">
                <param name="location">apps/reports/templates/hr004.jasper</param>
                <param name="dataSource">reportData</param>
                <param name="format">PDF</param>
            </result>
        </action> i dont know why it doesnt retrieved the data from the ArrayList?
please help me..Thanks in advance.

Hi,
Looking at the code, it seems you are compiling a JRXML and that is all.
Instead, you should fill it with data and then export the result to PDF.
No wonder you don't see any result.
You need to learn more about how JasperReports work. For a start, I can tell you that you could compile JRXML files as part of the application build process using an Ant task, and not dynamically, like you did. But no matter how you compile the report template, you actually need to fill it with data, using the JasperFillManager and then export it to PDF using the JasperExportManager.
You can see all this in our samples in the /demo/samples folder that is part of our project distribution package. There is even a sample Web application in the /demo/samples/webapp folder.
I hope this helps.
Teodor

Data source creation for service contract configuration

Hello all,
I have to create a data source for extraction of service contract configuration. I think this could work like data source creation for sales order creation, but I don't know waht to enter in transaction CTBW. Anyone here has done this previously? Any pointers and/or the strategy you've used will be useful.
Kind regards,
Simon

Hi,
If you are asking about "CRM sales contracts", The following help gives the info about standard ODS and Datasource.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d5/9fcd3b869e7d72e10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

What is Attr data source name for SOLD,BILL and SHIP TO PARTY

Hi all,
I want master data source names for these SOLD,BILL and SHIP TO PARTY.
Bill to party,Ship to party and Sold to party Master data source names.
Plz give me Some help on this.
i want solution very urgently.
Thanks,
Guna.

Dear Gunasekhar,
There are no separate datasource for 0sold to, 0ship to and 0bill to parties.
They are referrenced to 0CUSTOMER in BW. and the datasources for 0customer are 0CUSTOMER_ATTR and 0CUSTOMER_TEXT.
Assign points if useful
Regards
Venkata Devaraj!!!

OracleAS Data Source Plugin for OmniPortlet for SAP

Hi,
What is the later version for the OracleAS Data Source Plugin for OmniPortlet for SAP ?
Still BETA release ?
thanks

Hello,
We get the same error message for our WD4J application now
"JCo data source missing for type: class com.company.application.main.model.Tvm1T class com.sap.aii.proxy.framework.core.DataAccessException"
Does anybody know the reason for this?
Thanks,
Robert

Remove data source queue for datasource

Hi,
How to remove data source queue for datasource ?
Regards,
Patrick

Depends on which datasource you are dealing with.
Normally you can just delete the delta queue from transaction RSA7 in the source system. If you are dealing with logistic datasources it might be different.
Hope it helps.
BR
Stefan

Data source properties for the rulefiles.

Could some one explain what is the use of field edits like move/split/join/create of data source properties for the rulefiles.

move/split/join/create are very useful loading data without going back to source file and changing them. For example
you have an entity dimension with member names like
east10569
east10658
if you want to add a prefix for these members to make them unique, you can use those field edits.
the other uses which I saw is concatination to create unique names etc.
hope this helps

Help req in table s525 ( any standard data source avaialable for table s5)

Hi all,
i want to know any standatrd data source available for the table s525 - MRP Exception Message Detail
pl help me on this ..
Thanks
sivakumar r

pl any one help me
any std data source available for the table s525

How to findout the data source information for the perticular tables

Hi,
Can you please tell me the process to findout the data source information for the perticular tables .
For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
Thanks.

Hi,
Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
I have searched in help.sap.com but I didn't find any information on this .
Please let me know is there any way to know the data source details for SAP Tables.
Thanks

No master data source mainatenance for object

Dear SDN.
I want to look for master data for object but it gives message.
No master data source mainatenance for object.
What is going on wrong.

Hi,
When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
Regards,
Amruth

Report that uses web services as data source, prompts for database logon

I have a crystal report that uses web services as a data source. When I deploy the report to Infoview it prompts me for a database username and password. Since I am not using a database it should not prompt me for these. I tried various options in the CMC->database settings for this report but it still prompts me for the database logon info or tells me that the database logon information is incorrect.
The report work fine in the Crystal Reports Designer.
Does anyone know how I can prevent this report from prompting me for the database logon info ?
Thanks,

What options have you tried in the CMC?
Have you tried running the report in Crystal Reports installed directly on the Enterprise machine?

Remote Data Source Settings for Lotus Notes CWS

I have installed the Crawler Web Service for Lotus Notes on a box seperate from Machine hosting Portal Server. After that I did all the migrations successfully at the portal side as mentioned in installation guide. But while configuring Remote data Source ,in Authentication Page , i am not getting an edit box to specify the User ID file.Its just have edit box to specify password.
Its taking the last user id that was used in the Notes Client on that machine, or more specifically the KeyFilename setting in the Notes.ini file
How can i set the User ID File(to be considered).
Moreover there is an error
An error occurred while validating the remote XUI service. Verify the Web Service settings, including the SOAP Encoding Style.
Can anybody provide pointers on configuring the Remote Data Source for Lotus Notes database
Thanks in Advance

Hi,
I would check this with the Lotus Notes guys. If the mail is OK in SOST, then SAP is delivering the mail correctly. There is something wrong with the Lotus Notes client itself. I have seen this same problem and I have alos witnessed the HTML email to crash the whole Lotus client. (This lead to a situation that it was just easier to send the plain text emails.)
Regards,
Karri

Why is the Microsoft Office Access Database Engine data source looking for a workgroup information file?

While trying to import to MSSQL2012 from SSDT using the wizard from an Access 2013 DB (.accdb) which is password protected, I get the following error with the username blank and the password field correctly populated:
Cannot start your application. The workgroup information file is missing or opened exclusively by another user. (MicrosoftOffice Access Database Engine)
But according to this link:
http://office.microsoft.com/en-us/access-help/what-happened-to-user-level-security-HA010342116.aspx
MSA10 and beyond shouldn't need workgroup information files, although it's not clear to me if they are
created/used or not.
I can point the wizard to some local version of system.mdw at Advanced -> All -> Jet OLEDB:System Database, and then the error becomes:
Not a valid account name or password. (Microsoft Office Access Database Engine)
for any username I can think of.
Questions:
1. Why does this data source insist on looking for a workgroup information file even though user-level security should be disabled?
2. Why does the Open dialog box for the Microsoft Access Database Engine have *.mdb as the only selectable filetype?
3. How can I get around these errors for an .accdb that is password protected?
Thanks!

Hi JordanPG,
To connect to Access 2007 or later database, we need the Microsoft ACE 12.0 OLE DB driver. SQL Server only installs the Microsoft Jet 4.0 OLE DB driver which can be used to connect to Access 2003 or earlier database. Besides, the Microsoft Jet 4.0 OLE DB
driver only has 32-bit version, but the Microsoft ACE 12.0 OLE DB driver has both 32-bit and 64-bit version. However, the 32-bit and 64-bit Microsoft ACE 12.0 OLE DB drivers cannot be installed on a single server.
According to your description, you can use the 64-bit SQL Server Import and Export Wizard to load data from the Access database, so the 64-bit Microsoft ACE 12.0 OLE DB driver is installed on your computer. Since the BIDS/SSDT is a 32-bit application, the
64-bit Microsoft ACE 12.0 OLE DB Provider is not visible in BIDS/SSDT. So, when you said that you select “Microsoft Access (Microsoft Access Database Engine)" in the SQL Server Import and Export Wizard (it is actually the 32-bit version) started by the SSDT,
I think it should be “Microsoft Access (Microsoft Jet Database Engine)”. Because the Microsoft Jet 4.0 OLE DB driver only supports Access 2003 or earlier format, it threw the error “Test connection failed because of an error in initializing provider. Unrecognized
database format 'C:\myDB.accdb'”.
In this situation, you have two approaches to avoid this issue:
Launch the SQL Server Import and Export Wizard (64-bit), and select “Save SSIS Package” to “File System” on the “Save and Run Package” page. Then, the package will be saved to a specified directory. After that, you can add this existing package to a SSIS
project. The status of the corresponding OLE DB Connection Manager should be Work Offline, or the OLE DB Source will throw an error about 32-bit driver if the Connection Manager is not in Work Offline status, you can ignore that and the package can run successfully
in SSDT as long as the project is set to run in 64-bit runtime mode.
However, for the SSDT 2012 integrated with Visual Studio 2012, the 64-bit runtime mode is disabled. In this situation, to run the package in SSDT, you have to uninstall the 64-bit Microsoft ACE 12.0 OLE DB drivers and install the 32-bit one. Here is the
download link:
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Regards,
Mike Yin
TechNet Community Support

Data source enhancement for text

Hi,
I have a datasource 0customer_attr and it has also zfield .now requirement is to load the text of that zfield also in BW. I have a doubt about that whether I have to enhance ocustmer_attr ie add new field into it or I have to create a generic data source for it.
Thanks,
Saurabh

Hi,
customer_attr is fetching data from extract structure and this is based on kna1 table and kna1 table has some z fields . for those zfields we have custom table and in custom table(ztable ) we get the data from there respective r table . ie we have acq code in custom table(and in also data source and extract structure and kna1 table) and we require acq description also in BW. and acq code & desc is maintain in its respective table(its a z table ).
i also see the enhance abap code which is fetching data for acq code .
i have a doubt whether i add one more field to 0cust_attr or create generic data souce as it is Zfield.
Thanks,
Saurabh

Data Source Limitation for Selectors

Similar Messages

Maybe you are looking for