Data source rsa3

hi,
   in rsa3 how we can make the extarct call data record calls constant.
i.e how we can set the default value for this when doing extraction into bw.
regards
pls assign points if helpful.

Hi,
RSA3 is only a Checker, you should use either the InfoPackages to set this go into the InfoPackage > Scheduler > dataSource default transfer
or alternatively you can set this globally in SBIW in both BW and in R/3
Data Transfer to the SAP Business Information Warehouse > General Settings > Maintain Control Parameters for Data Transfer

Similar Messages

  • COPA data source RSA3, RD155

    Hi,
    when we run the RSA3 for COPA data source 1_CO_PA2901000_ACC we get error RD155 " No Source could be found to answer the search query".
    Any ideas
    Umang

    Hi,
    check out this link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler
    hope this helps
    assign poins if helpful
    Janardhan Kumar

  • Data is not coming in RSA3 for LIS Data Source 2LIS_02_S174

    Hi BW Experts,
    We got one requirement on LIS. I haven't work on LIS previously.
    Data Source Name: 2LIS_02_S174, This is activated and able to see in T-Code: OMO2.
    First we checked the contents of S174 in SE11 & RSA3 and found 0 Records before filling the Setup Tables.
    Then we filled the Setup Tables for S174 and finally got 0 Records in RSA3 as well as in S174 table also after filling the Setup Tables.
    I have Given version name : &(A
    We dont know, what are the settings we need to do before filling the Setup Tables. But we checked job overview in SM37 and it was taking 120 Sec.
    Thanks in advance
    Regards
    Pinky Reddy

    Hi Pinky
    Yes, LBWG is the generic T Code for deleting the setup tables of any application area. You need to enter your application area number in LBWG which deletes the content of all the setup tables pertaining to that application area.
    Please make sure before performing LBWG that you have activated the extract structure for the particular Datasource in LBWE.
    For filling 2LIS_02_S174, use OLI3BW.
    Thanks
    Nirmit

  • Fields missing from Data Source but displayed in RSA3

    Hello Experts
    I have an issue while finding for a field in the data source. As I am looking for some fields : MABST, MINBE, EISBE on BW Side but not found. When I llok the same fields in ECC Side in the table RSOSFieldmap, then I get these fields in 0MAT_PLANT_ATTR Data Source. In the same time , the fields are not available in the Data source on BW Side as well as on ECC Side(while goin thru RSA6). Also when I execute the RSA3 for the data source, I am getting the data in the Missing Fields. How it can be possible? Also plz let me know how can I make these fields available in Data Source.
    I replicate the data source, also i looked for the hidden fields, but still not succeed.
    Thanks in advance
    Neha

    Hello,
    TO unhide the field,
    Just Goto T.code RSO2 > press change button.> unhide the filds and --> Generate the Datasource
    or
    Goto RSA6 --> select the Datasource and --> press change button (pencil icon) --> unhide the filed --> Save and Generate the Datasource.
    Try the above two option and check if it is working.
    also go thru the below post
    BI : Hidden field Datasource
    Hope this helps,
    Sri...

  • Unable to find a data source in RSA5 which can be seen in RSA3.

    Hi there,
    I am unable to find the business content data sources in RSA5, but I can find the same data sources in RSA3 (extract checker).
    I need these data sources to be replicated to BW and take it up further.
    Any light on the above issue will be of great help.
    Thanks in advance.
    Regards.

    Guys
    Regarding my previous messages, None of the posts where working out for me. I Had tried all the possibilites of your messages,but I am facing the same problem
    1. I am unable to find data source in RSA5,But I had find the data in RSA3. Pls let me know how you guys what me to go. It will be really appreciated. pls let me know from ground level how do you want me to dig in to the issue.

  • Data source activated in RSA5 but error in RSA3

    Hi,
      I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction    Message no. RJ012").
      Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
    Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
      Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
      Thanks
    Arunava

    Bhanu,
      Thanks again for your super fast reply. This really solved my issue.
      However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
      But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
    I would really really appreciate.
    Thanks
    Arunava

  • System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.

    Hello Experts,
    I got short dump while executing data source 2LIS_11_VASCL in RSA3.
    The details are as follow.
    When importing object "MC11VA0SCL_TAB", the structure did not match the
    structure of the target object. The error occurred in component
    no. 567.
    This may be due to one of the following reasons:
    - the structure is actually different (the next field has, for
      example, a different data type) or
    - the same sequence of components were exported and imported,
      but the fields were from other include units.
    I have checked source and target fields and those are of same length and data type.
    Could you please give some points why this short dump occurs.
    Thanks
    Konda Reddy

    Hi,
    This error is not between BI and R/3.  It is within R/3.  You may have setup data and then modified the datasource.
    Delete setup data, generate your datasource again.  Setup data and try again.
    If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
    Cheers....

  • Generic Data Source is calling multiple times in RSA3

    [color:red}<Moderator Message: This topic has alread been discussed a lot of times. Additionally there are weblogs related to it. Please search the forums and/or the blogs for this issue>
    Hi experts,
    I have the requirement to get data from Generic Data Sources with function Module,
    after finishing the FM I have checked in extact checker(RSA)
    in the internal table I_T_DATA is displays 281 records,
    but in RSA3 it shows 112560 records, I found that the FM is calling multiple time by executing one time in RSA3.
    1.what would be the problem
    2.where is the porblem is it in FM coding or any other places to check.
    <removed by moderator>
    Regards
    Vijay
    Edited by: Siegfried Szameitat on Feb 3, 2009 11:45 AM

    Hi Savita,
    I don't understand clearly from your reply regarding flow you transported and what all you transported.
    You need to first transport objects in R/3 and import them.
    Then transport Infoprovider, Datasource in BI assuming depenedent Infoare Infoobject, application component already transported.
    Then transport your Infosource, Update rule, Transfer rules, Infopackage.
    Hope you understood.
    Ravi

  • Short Dump Error when we check the Data Source in RSA3

    Hi. Experts.
                       We are using  Data Source 2Lis_13_VDITM and when we try to check in RSA3
    for recorts it is going short dump. I am just providing the error information.
                  An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
                   Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "MC13VD0ITM_TAB", the component no. 96 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX".
                        The data type is "N" in the dataset, but "X" in the program.
            Since I don't have much knowledge in ABAP, Please help me out regarding this issue. Suggest me possible solution and let me know if you need any further information.

    Hi,
    Try adding a TRY CATCH block in the extractor function module to catch the exception.
    For the type mismatch you will have to make sure the variables are of same type or they can be type converted.
    Use the debug mode of RSA3 to find what data is being exchanged.
    You will need to change your extractor to avoid the dump.. or ensure that the value being passed to that object is correctly being passed(correct format)
    Cheers
    Kiran

  • I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b

    i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
    what would be the cause

    Hi,
    I guess you mean the target table in BW, correct?
    First replicate your DSource in BW
    Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
    You should now see the field in your PSA table.
    hope this helps...
    Olivier.

  • Payroll data source error in rsa3

    Hi,
        I have a requirement that I have to extract payroll data source 0hr_py_01 , But when I check the records in rsa3 tcode , I got the message  0 data records selected.
    So I gone through different forums , I used the sap notes 672514 & 397208. I used P_BAS_ALL in ALEREMOTE User profile but no use.  Plz solve the problem.
    can any one guide me plz
    Thank you
    Edited by: Srikanth.T on Feb 27, 2012 11:04 AM

    hi
    thank you for your replies, i checked the t-code pc_payresult , this does'nt have any data.  in rsa3 i found the records for 0hr_py_1 .
    this rsa3 problem was solved by giving authorization by basis.  by using su53 t-code
    can you suggest any solution thank you.
    Edited by: Srikanth.T on Feb 28, 2012 6:05 AM

  • Missing Codition Types at 2LIS_13_VDKON data source  in RSA3 Tcode.

    Dear All,
    i am getting problam with 2LIS_13_VDKON data source in RSA3 Tcode.
    When i am checking it, some condition types are missing.
    i checked it condition types are active also.
    and reloaded setup table.
    Still same problam is coming .
    please provide me your inputs.
    Regards
    SSMS

    hello
    How did you solve your problem. I m getting exactly same issue where some cond types (active) are missing.

  • Short dump in RSA3 --Z Data Source

    Hi,
    I created a Z data source based on view and i appended extract structure to insert ZZ fields.
    When i execute the data source it is showing me short dump how shall i proceed
    I checked the view conditions and it is extracting data and showing now error and i checked the enhancements i have written in CMOD and checked the program it is displaying No syntax errors
    Please advise me on how to correct the errors....
    If need further info of short dump please ask
    Runtime Error          DBIF_RSQL_INVALID_RSQL
    Exception              CX_SY_OPEN_SQL_DB                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLRSA3" had to be terminated because one of the
    Statements could not be executed. 
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail belo.The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', waS neither                                                           caught nor passed along using a RAISING clause, in the procedure "RSA3_GEN_GET_DATA" "(FUNCTION)"                                                                               
    Since the caller of the procedure could not have expected this exceptio to occur, the running program was terminated.           
    The reason for the exception is:                                      
    The data read during a SELECT access could not be inserted into the target field.                                                         
    Either conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
    Information on where terminated                                                                               
    The termination occurred in the ABAP program "SAPLRSA3" in "RSA3_GEN_GET_DATA".   
    The main program was "RSFHGEN2 ".                                                                               
    The termination occurred in line 226 of the source code of the (Include)          
    program "LRSA3U03"                                                               
    of the source code of program "LRSA3U03" (when calling the editor 2260).          
    Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in   
    the                                                                               
    procedure "RSA3_GEN_GET_DATA" "(FUNCTION)" but was not handled locally, not       
    declared in the                                                                  
    RAISING clause of the procedure.                                                  
    The procedure is in the program "SAPLRSA3 ". Its source code starts in line 5     
    of the (Include) program "LRSA3$03 ".                                             
    Program
    002150                                                                            
    002160       CASE G_S_INTERFACE-UPDMODE.                                          
    002170         WHEN 'F' OR 'C' OR 'I'.                                            
    002180   * First data package -> OPEN CURSOR                                      
    002190           IF G_COUNTER_DATAPAKID = 0.                                      
    002200   * Open Cursor for dynamical SELECT                                       
    002210             OPEN CURSOR WITH HOLD G_CURSOR FOR                             
    002220             SELECT * FROM (G_S_OLTPSOURCE-EXTRACTOR)                       
    002230                    WHERE (L_T_DYNAMIC_SELECT).                             
    002240           ENDIF.                                                           
    002250   * Fetch first data package                                               
    >           FETCH NEXT CURSOR G_CURSOR                                       
    002270                        APPENDING CORRESPONDING FIELDS OF TABLE E_T_DATA    
    002280                        PACKAGE SIZE G_S_INTERFACE-MAXSIZE.                 
    002290           IF SY-SUBRC <> 0.                                                
    002300             RAISE NO_MORE_DATA.                                            
    002310           ENDIF.                                                           
    002320           G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.                   
    002330         WHEN 'D'.                                                          
    002340           PERFORM FETCH_GEN_DELTA IN PROGRAM (L_GEN_PROGID)                
    002350                           TABLES E_T_DATA                                  
    002360                                  L_T_DYNAMIC_SELECT                        
    002370                                  G_T_FIELDS                                
    002380                           USING  G_S_INTERFACE-MAXSIZE                     
    002390                           CHANGING L_FLG_NO_MORE_DATA.                     
    002400           IF L_FLG_NO_MORE_DATA = 'X'.                                     
    002410             IF NOT L_T_BDCPS[] IS INITIAL.                                 
    002420               L_T_BDCPS-PROCESS = SBIWA_C_FLAG_ON.                         
    002430               MODIFY L_T_BDCPS                                             
    002440                    TRANSPORTING PROCESS WHERE PROCESS = SBIWA_C_FLAG_OFF.

    Hello,
    This thread is answered. Was it the table space or something else?
    We may have a similar issue as recently posted in thread:
    "Short dump in SAP R/3: SQL statement buffer overflow?"
    Best regards
    Thomas

  • No data in R/3 data source after extraction!

    Hello All,
    i am extracting the data from R/3 source system ( 4.7 ides system).
    after succesffully transferring the data source and replicating it to the BW, i had created a infocube and scheduled the info package so that R/3 data source data gets uploaded into the Info cube created.
    after scheduling in the header tab of monitor screen i found the error messege as "no data in R/3 data source, check your data source in R/3".
    is it that data does not exist in R/3 Business content data source or is that data has not uploaded into BW?
    can nay body here thorw some light onto it?
    Ravi

    Hi Ravi,
    Please check the tables associated with your datasource and look if the data is available inthe respective tables.
    You can also check the extracted records in T.code RSA3 in R/3 for your datasource.
    Hope it helps!!!!
    Regards,
    Amit

  • Unable to get the data in RSA 3 for the data source 2LIS_03_BX.

    Hi Xperts,
    we are loading the data sources(2LIS_03_BX) by using MCNB transaction but not getting the data in it.
    can any one please tell me how to load the data into it with step by step process.
    regards,
    satish

    Hi,
    To see the data in RSA3 you need to do the setup of data for the particular data source through SBIW transaction.
    The Rsa3 transaction displays the data present in the setup tables of the particular data source.

Maybe you are looking for