Data source selection check box Enabling

Hi All,
Good day, This in Ravi .
I need one small help from you.
We have a data source named 0co_pc_pcp_01.
we need to check the selection check box  for the field ELEM(cost component number).
But it was in disable mode.
Please could you tell how to eanble that selction check box.
Bcoz i need to set that option for that field and have to load in BW with selctions in infopackage.
Please could you help me reagrding this, waiting for your replies.
my maild id is [email protected]
Thanks & Kind Regards
Ravi

Hi Ravi,
Which system is it? R/3 Dev pr R/3 QUAL? If it is R/3 Dev then you can goto the TCode RSA6 select your data source and click on the pencil icon on the menu bar. It will ask for a Transport Request, you can give one and then it will take you to the change mode of the data source, there you can do the changes and generate the data source.
But if it is R/3 QUAL then you can't change it there straightaway. You have to first change it in R/3 DEV and collect these changes in a Transport Request and then transport it to R/3 QUAL.
Hope it helps..

Similar Messages

  • Enable selection check boxes in CO-PA datasorce

    HI BI gurus,
    I have an CO-PA datasource,
    in datasource level some fields are not enabled ,it wont allow to select or reselect the options, that selection check box is automatically set 'M' version ,which means 'Must Required' ,now i want to change this 'M' to P flag ,
    in BW i know that how to do ,in BI i don't know how to do that,
    cause : while loading time in infopackage level which is asking KOKRS: controlling area Range ,and PERVI: fiscal period is asking,if u wont give this options it wont load the data
    i dont want this restrictions in Data selection also ,plz  help me
    Thanks and Regards
    prakash.v
    Edited by: Prakash V on Jan 2, 2008 10:20 AM

    You can write a sample code in update rule to delete undesired currency type:
    delete data_pakage where 0currtype = 'B0'.
    Not sure on 0currtype name.
    Hope it helps.
    Regards

  • Re: Retrieving data from the check box group.....

    Hi all,
    I am new to webdynpro Java. I'm facing a problem while retrieving data from the check box group..
    I've taken a simple type "Status" and Node with value attribute named status and set the property of that attribute as the simple type. This attribute is bound to the checkboxgroup.The cardinality of the Node is 0..n
    But i am unable to read the checked items of the group.
    Please help me out in solving my problem........

    Hi,
    Use the following
    for (int x=0; x< wdContext.nodeTest().size(); x++)
         if( wdContext.nodeTest().isMultiSelected(x) )
                     // Selected Element
              IWDNodeElement nodeElement = wdContext.nodeTest().getElementAt(x);
               nodeElement.setAttributeValue("<Your Attribute> ", <Value>);
              //Ex setting value for attribute called Name
              nodeElement.setAttributeValue("Name", "Test");
    Regards
    Ayyapparaj

  • How can i turn on source determination check box by default in p.req

    heloo
    how can i turn on source determination check box on in p.req mean whenever i use me51n  in pop up sceen it should already be checked.
    second how can i creat p.o form p.req automatilaly and then send it to edi.
    what i do't wana use me59n iwant system once i create p.req and it has valid source just create p,o and send it to vendor.
    thanks

    Hi
    You can switch the Source determination indicator on whenever you enter..
    1) Go to Personal settings in ME51N Screen>select default Values tab>if you do not find Source determination field then click More fields move the field to line 1. Now you check this field and save it.
    2) To create PO from PR make sure you have valid source of supply assigned to PR and Auto PO checked in VMR & MMR, Inforecord with Valid condition exist. Run the tcode ME59N and the system will convert the PO from PR.
    3) To send the PO to Vendor via EDI you need to set up EDI with the help of Abaper by using message determination procedure and EDI/ALE setting.
    Hope it helps
    Karthik

  • BOXI3.0: Universe and Local Data Source Selection

    Hi all. I am Alias.
    I have one question. For the full XI3.0 installation, one of the products is Web Intelligence Rich Client.
    In Web Intelligence Rich Client, we can have Data Source Selection which is Universe and Local Data Source. But for Web Intelligence/InfoView, we can only select universe, or maybe canu2026 I need to explore more but still could not find it.
    Hope you guys can help me on this matter.
    Best regards,
    Alias

    Hi Jacques.
    Thanks for the link.
    WRC we need to install for every user desktop right? But for Webi/inforview we only install at server.
    In term of licensing, how it works?
    Regards,
    Alias

  • How to Save the multiple selection check box values into the database

    i have the multiple selection check box implemented in UI through drop down list,i can choose the desired values from the drop down through checkbox, but i m unable to store these values and commit the values into the database all at a time.

    You can access the values using listbinding and can then store them as a string by using a delimiter.

  • Multiple Selection Check Box

    Hi
    I want to allow the user to select multiple items via a checkbox displayed as LOV.
    I've managed to display all the LOV entries as check boxes just by selecting a LOV but it only stores one of the items I've selected in that LOV.
    I need a checkbox system that stores data like a shuttle control, i.e. 1:2:4:9 etc
    Is this possible without using Add-on JavaScript library's?
    Thanks
    Adam

    You can access the values using listbinding and can then store them as a string by using a delimiter.

  • Extracting values from multi select check boxes delimeted by ":"

    A set of check boxes in an Apex form produces "V1:V2:V3" in the target field, these are the key fields from a dynamic selection lists based on a table that contains the key and value fields. Does anyone have a sample SQL fragment that will produce a record for each one of the values ?
    FORM_TABLE
    ID (1)
    CB_TARGET (V1:V2:V4)
    LIST_TABLE
    KEY_F (V1),(V2),(V3),(V4) etc.
    VALUE_F (Value 1), (Value 2), (Value 3), (Value 4 ...)
    Even though there is only a single row in this example in the "FORM_TABLE", how can this be transformed to :
    1, V1
    1, V2
    1, V4
    Regards
    H

    Does anyone have a sample SQL fragment that will produce a record for each one of the values ?Does it have to be SQL? The simplest approach is probably PL/SQL, using the <tt>apex_util.string_to_table</tt> function.
    For a purely SQL-based solution, use whatever string-to-row technique is appropriate to your situation.

  • How to get the sum of selected check boxes?

    I have created this simple form with several fields. Fields can be selected via a check-box and they have a price listed.
    I would like to have the sum of each selected product, added in total.
    You can check it out here: https://www.dropbox.com/s/wl1bqz4fa0vlrsk/Student%20Form.pdf
    Help.. anyone?

    it's me again..
    here's a solution: http://forums.adobe.com/thread/929801

  • How to make data source to be RDA Enabled?????

    hi experts,
    Could you please give me step by step procedure to make data source to be enabled?
    i did try in ROOSOURCE table and try to debug it but i couldn't succeed.
    please help me out regarding this.
    regards
    vadlamudi

    Hi Venu,
    You use the data transfer process (DTP) for real-time data acquisition to transfer data to the DataStore object from the PSA. In the DataStore object, the data is available for use in reporting.
    Refer the following links on the same which will be helpful for u.:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f80a3f6a983ee4e10000000a1553f7/content.htm
    also refer:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
    Real-Time Data Acquisition -BI@2004s
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f80a3f6a983ee4e10000000a1553f7/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3db14666-0901-0010-99bd-c14a93493e9c
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3cf6a212-0b01-0010-8e8b-fc3dc8e0f5f7
    http://help.sap.com/saphelp_nw04s/helpdata/en/52/777e403566c65de10000000a155106/content.htm
    https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
    Thanks
    Assign points if this helps

  • Selecting (checking boxes) within Library in iTunes

    Is there a quick way to select or deselect (checking boxes) within your library (or specific playlist) as a means to control the items that you want to move to the ipod? Usually in a similar environment, you have an option to select all of the boxes and check them or the reverse in an attempt to control selection.
    Can anyone help? Apple(corp) suggested this support forum.
    Thanks (in advance)
    David

    Make a selection by clicking on the first track and shift-clicking on the last one for consecutive tracks or command-click on ones that are non-contiguous (you can combine these techniques). Then control-click on the selection and choose "Check (Unselect) Selection".

  • Deletion of single or multiple rows by selecting check boxes?

    Hi ,
    I want to delete a row or no of rows  in a table by selecting the check boxes.COuld any one suggest me how to do this?
    Regards,
    Ram

    Following is the JavaScript sample you may have to tweak the code to fit your situation....
    // Invoke the Instance Manager to remove the current instance of the detail subform.
    _<SubformName/RowSOMName>.removeInstance(index of the object to remove)
    //_Section2Detail.removeInstance(this.parent.index); //in my case I have a delete button next to each row when clicked that will pass the index of the parent(row index as it is part of that row).
    // Invoke the recalculate method to update the form calculations.
    xfa.form.recalculate(1);

  • Printing selected check boxes

    I am creating a form where a user can check up to 20 check boxes... How can a make it so only the SELECTED/CHECKED check boxes get printed. I think i can make a hidden subform where as the boxes are checked it populated the name of that box... then make that hidden sub field visible only at print. Can anyone give some guidance, thanks!

    The code I had in my reply is generalized code can be used with any checkBox irrespective of name. No customizations required to get what you need. In the code "this" references the object that code is associated with hence you do not have to specify the name of the object. So use the same code over and over with each check box as indicated.

  • Issue With select Check box in advance datagrid

    Hi
           i am using advance datagrid having hierarichal data.There is one column having checkbox and one header renderer(CheckBox) on top giving functionality of select all.when i clicked on select all checkbox , all the checkboxes in that column not showing checked unless  i collapse or expand the heirarichal data or scroll the advance data grid,similar is the case with unselect checkbox.however internally values are selected and unselected as per functionality but checkboxes are not show checked/unchecked in first go.i have tried following things to refersh the data but nothing worked.
    refreshing the arrayCollection and then calling invalidateList() on the grid.
    IHierarchicalCollectionView(adg.dataProvider).refresh();
    so please  guide me .
    Thanks in advance
      Vineet Osho

    we have a field to bind the checkbox selected status, such as 'selected', when the data['selected'] = true means the checkbox is checked, otherwise is unchecked
    the itemrenderer code:
    public class CheckBoxADGItemRenderer extends CenteredCheckBox
                        public function CheckBoxADGItemRenderer()
                                  super();
                        override public function set data(value:Object):void
                                  super.data = value;
                                  invalidateProperties();
                        override protected function commitProperties():void
                                  selected = data['selected'];
                                  super.commitProperties();
    when click the header renderer checkbox, change the collection data 'selected' field, when checked, data['selected'] = true;
    then invalidate the check column properties,
    eg:
    private function invalidateCheckColumnProperties():void
                                  var i:int = 0;
                                  var n:int = listItems.length;
                                  var instance:IInvalidating;
                                  for (i = 0; i < n; i++)
                                            instance = listItems[i][0] as IInvalidating;
                                            if (instance)
                                                      instance.invalidateProperties();
    Hope help for your.
    Huang

  • How to stored data after clicking check box save in data base table

    TABLES:mseg,mard,mkpf.
    TYPE-POOLS:slis.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
                   smatnr FOR mseg-matnr MODIF ID m2,
                   swerks FOR mard-werks MODIF ID m3,
                   slgort FOR mard-lgort MODIF ID m4,
                   slgpbe FOR mard-lgpbe MODIF ID m5,
                   scharg FOR mseg-charg MODIF ID m6,
                   sbwart FOR mseg-bwart MODIF ID m7,
                   skostl FOR mseg-kostl MODIF ID m8,
                   saufnr FOR mseg-aufnr MODIF ID m9,
                   srsnum FOR mseg-rsnum MODIF ID m10.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
               pse RADIOBUTTON GROUP radi,
               bps RADIOBUTTON GROUP radi.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETER:layout TYPE i.
    SELECTION-SCREEN END OF BLOCK b3.
    DATA:BEGIN OF itab OCCURS 0,
         mblnr LIKE mseg-mblnr,
         matnr LIKE mseg-matnr,
         werks LIKE mard-werks,
         lgort LIKE mard-lgort,
         lgpbe LIKE mard-lgpbe,
         charg LIKE mseg-charg,
         bwart LIKE mseg-bwart,
         budat LIKE mkpf-budat,
         menge LIKE mseg-menge,
         meins LIKE mseg-meins,
         kostl LIKE mseg-kostl,
         aufnr LIKE mseg-aufnr,
         rsnum LIKE mseg-rsnum,
         checkbox TYPE c,
         END OF itab.
    DATA:  gt_fieldcat TYPE slis_t_fieldcat_alv,
           gw_fieldcat TYPE slis_fieldcat_alv,
           gt_layout TYPE slis_layout_alv.
    START-OF-SELECTION.
    SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
        msegmenge  msegmeins msegkostl msegaufnr mseg~rsnum
    INTO TABLE itab FROM
              mseg JOIN mard ON mardmatnr EQ msegmatnr
                   JOIN mkpf ON msegmblnr EQ mkpfmblnr
                   WHERE mseg~matnr IN smatnr.
      IF sy-subrc EQ 0.
        SORT itab BY matnr.
        PERFORM display_alv_output.
      ENDIF.
    *&      Form  display_alv_output
          text
    -->  p1        text
    <--  p2        text
    FORM display_alv_output.
      REFRESH gt_fieldcat.
      gw_fieldcat-fieldname = 'MBLNR'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 1.
      gw_fieldcat-seltext_m = 'material document'.
      gw_fieldcat-key = 'x'.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'MATNR'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 2.
      gw_fieldcat-seltext_m = 'material'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'WERKS'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 3.
      gw_fieldcat-seltext_m = 'plant'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'LGORT'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 4.
      gw_fieldcat-seltext_m = 'storage location'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'LGPBE'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 5.
      gw_fieldcat-seltext_m = 'storage bin'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'CHARG'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 6.
      gw_fieldcat-seltext_m = 'Batch number'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'BWART'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 7.
      gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'BUDAT'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 8.
      gw_fieldcat-seltext_m = 'Posting Date in the Document'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'MENGE'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 9.
      gw_fieldcat-seltext_m = 'QUANTITY'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'MEINS'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 10.
      gw_fieldcat-seltext_m = 'Basic unit of measure'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'KOSTL'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 11.
      gw_fieldcat-seltext_m = 'Cost center'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'AUFNR'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 12.
      gw_fieldcat-seltext_m = 'Order Number'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-fieldname = 'RSNUM'.
      gw_fieldcat-tabname = 'itab'.
      gw_fieldcat-col_pos = 13.
      gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
      gw_fieldcat-key = ' '.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
      gw_fieldcat-col_pos = 14.
      gw_fieldcat-fieldname = 'CHECKBOX'.
      gw_fieldcat-seltext_m = 'Compltd'.
      gw_fieldcat-checkbox = 'X'.
      gw_fieldcat-edit = 'X'.
      APPEND gw_fieldcat TO gt_fieldcat.
      CLEAR gw_fieldcat.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        I_CALLBACK_PROGRAM                = 'ZREPORT'
        IS_LAYOUT                         = gt_layout
        IT_FIELDCAT                       = gt_fieldcat
       TABLES
         t_outtab                          = itab
      EXCEPTIONS
        PROGRAM_ERROR                     = 1
        OTHERS                            = 2.
    ENDFORM.                    " display_alv_output
    this is mycode .
    send me replay.

    Hi Lakshmi,
           Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
    Regards,
      Jayaram...

Maybe you are looking for