Data source using Fn.Mod. in R/3 shows 53 records but in BW side show error

Hello gurus,
I have created a data source in R/3 , when tested showed 53 records, but in BW side when i did extraction it failed, & put me an error message saying
" error occured in source system"
Points will be awarded for any kind of response.
Thanks and regards,
Anurupa.

Hi,
Try what is given above.
Also check SM37 job log (In source system if load is from R/3) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' or cpicerror for any datapacket in SM37.
SM21 - System log can also be helpful.
If you are 3.5 try this also
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you should be able to overcome this issue.
Hope this helps.
Thanks,
JituK

Similar Messages

  • Cannot create data source using custom third-party driver

    Hi,
    I've just installed Weblogic Server 10.3.6 and I'm getting problems creating a generic data source using my own third party jdbc driver which I had no problems doing in Weblogic Server 10.0; this is what I did in 10.0;
    before starting server i put my driver jar file (and any jar files it needed) in the lib folder of the domain user project which weblogic appends to the classpath during server startup
    inside weblogic console -
    1. first page - provided a data source name and jndi name and selected 'other' for database type
    2. second page - selected 'other' for jdbc driver
    3. third page - deselected the global transactions
    4. fourth page - provided database name, username, host name, port, and password.
    5. fifth page - provided driver class, url, database user name and password (didn't bother with the test)
    6. Selected target server
    I then saved and activated changed and was done.
    This what I did for 10.3.6
    did the same thing I did for 10.0 before server start up
    inside weblogic console -
    1. first page - provided data source name and jndi name and selected 'other' for database type
    2. second page - selected 'other' for jdbc driver
    3. third page - deselected the support global transactions
    4. fourth page - here's where things are different - page only asked for database username and password, which I give.
    One this page I get a criptic error saying 'errors must be corrected before proceeding' - no other message as to what these errors might be either in the console or the cmd window of the server. I tried making changes to the provider authenticiation of the security realm but no luck. I tried following password creation requirements, I even tried proceeding to the next page without entering anything on this page, all no luck. I have no idea what's going on.
    Hope someone can help.
    Sam.

    I've fixed the class issue but am struggling a bit with SQL Server authentication. I'm running in mixed mode (originally set to Windows authentication but I've modified the security setting), I've enabled TCP/IP and Named Pipes, I've created a user (who I can log in to SQL Server Mgmt Studio successfully with), but still get a connection refused error.
    Any insight? Thanks.

  • What is an ageing report? What are the data sources used to develop an agin

    Hello BW gurus,
    I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
    Thank you.
    TR.
    •     Developed AR ageing report, created invoice layout and processed invoices.
    What is an ageing report? What are the data sources used to develop an aging report
    •     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts. 
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    •     Involved in the end to end implementation of BW at Reliance Group as a team member.
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
    a full life cycle project?
    •     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
    What are aggregates why do you need them?
    •     Prepared design documents from the Business Requirement documents and identified the
    relevant data targets for satisfying the customer requirements.
    What are the design documents does one prepare, please give an example. 
    Is cube a data target?

    What is an ageing report? What are the data sources used to develop an aging report
    Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
    customer (credit)  for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
    Requirement gathering, blueprint creation, development etc
    Refer to posts on Sap Methodology  and Sap lifecyle
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
    Please check these links
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
    What are the design documents does one prepare, please give an example.
    Design document is basically a document to say  how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets  to be used and how data shld be stored  for providing the client a solution they need.
    Is cube a data target?
    Yes cube is a data target.
    Hope this Helps
    Anand Raj

  • Error  while creating Generic data source using FM

    Hi Experts,
    I try to create a generic data source using the Function Module via the  transaction RSO2. I got the following error messages.
    " Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
    " Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
    " Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
    "The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
    for all 10  fields of type CURR.
    How shall i handle this issue..........any suggestions please........
    thanks in advance
    cheers
    sailekha

    Hi,
    Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
    Hope this helps,
    Regards,
    Carlos.

  • OLAP cubes from heterogeneous data sources using XML DB

    hi.
    Q:1
    How we can create an OLAP cube (XML cubes) from XML data sources if using XML DB.
    Q:2
    How we can create an OLAP cubes from warehouses and flat files and covert these cubes into XML cubes.
    Q:3
    Is there any other tool (Except Analytical workspace manager AWM) which supports the construction of OLAP cubes in XML format from heterogeneous data sources?
    Edited by: user11236392 on Aug 21, 2009 3:50 AM

    Hi Stuart!
    Your undersatnding is partially correct. i am working for providing an architecture for XOLAP, XML is one of my data source.
    The idea is to generate uniform cubes from heterogeneous sources that can be integrated into a global cube. instead of building Oracle OLAP cubes from all the sources (this work is already done) i want to generate an XCube from XML data sources using XQuery.
    On the other hand if we have generated the Oracle OLAP cube from other sources like warehouses or flat files. i have to convert these Oracle OLAP cube into XML cube for uniformity. in an research paper i find that there is an operator Xcube embedded in XQuery which converts the multidimensional data (cube) into XML cube. im looking for the implementation of this operator in Query that how this operator works.
    hope u understand my architecture. but if u still have some confusion, kindly give me ur mail id. i will mail the diagram of my architecture.
    thanks.
    saqib

  • Connecting through Data Source using JNDI

    I would like to connect my application to sql server database through data
    source using JNDI. But when i try to bind the data source object with the
    logical name, i am getting following exception. How can i ger rid of this
    error ? How can i provide the initial context ? I thought Java would create the default initial context by itself. But it doesn't seem to be true. Any type of help would be appreciated.
    -Prashant
    Exception :
    Naming Exception :Need to specify class name in environment or system
    property, or as an applet parameter, or in an application resource file:
    java.naming.factory.initial
    javax.naming.NoInitialContextException: Need to specify class name in
    environment or system property, or as an applet parameter, or in an
    application resource file: java.naming.factory.initial
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:651)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
    at
    javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:283)
    at javax.naming.InitialContext.bind(InitialContext.java:358)
    at RegDataSource.regDataSource(RegDataSource.java:30)
    at RegDataSource.main(RegDataSource.java:52)
    Source code :
    public class RegDataSource
    public RegDataSource()
    private void regDataSource()
    try
    com.microsoft.jdbcx.sqlserver.SQLServerDataSource sds =
    new
    com.microsoft.jdbcx.sqlserver.SQLServerDataSource();
    sds.setServerName("servername13");
    sds.setDatabaseName("test");
    Context ctx = new InitialContext();
    ctx.bind("jdbc/EmployeeDB", sds);
    catch(NamingException e)
    System.out.println("Naming Exception :" + e.getMessage()
    //+ "\n" + e.getExplanation()
    //+ "\n" + e.getResolvedObj()
    //+ "\n" + e.getResolvedName()
    e.printStackTrace();
    catch(Exception e)
    System.out.println("Exception :" + e.getMessage());
    public static void main(String[] args)
    RegDataSource regDataSource1 = new RegDataSource();
    regDataSource1.regDataSource();

    Thanks you very very much for your prompt reply and helping me out. I have following questions.
    1) Now i am able to bind data source object to the logical name. But the problem is that whenever i try to look up the data source object by providing logical name (i.e. DataSource ds = (DataSource)ctx.lookup("jdbc/EmployeeDB") ), it returns always null. I don't know why it doesn't return the correct data source object ?
    Following is the code used to bind datasource with the logical name
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.fscontext.RefFSContextFactory");
    env.put(Context.PROVIDER_URL, "file:/TEMP/jndi");
    Context ctx = new InitialContext(env);
    //Properties p = new Properties();
    //p.put(Context.INITIAL_CONTEXT_FACTORY,
    // "com.sun.jndi.fscontext.RefFSContextFactory");
    //Context ctx = new InitialContext(p);
    ctx.bind("jdbc/EmployeeDB", sds);
    Following is the code used to look up for the bound object
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.fscontext.RefFSContextFactory");
    env.put(Context.PROVIDER_URL, "file:/TEMP/jndi");
    Context ctx = new InitialContext(env);
    DataSource ds = (DataSource)ctx.lookup("jdbc/EmployeeDB");
    2) I am writing client server application in which my client is going to access the SQL Server 2000 to read/write database related data. The reason behind using the JNDI is that i don't want my client application to kwon which driver (sql) and database i am using. It is going to provide the great flexibility whenever i can make my application to use other database like Oracel, sybase, etc. without changing any code most probably. In this situation, which JNDI service provider to use ? I am not sure about "File System" service provider be the ideal choice for this type of situation. so please let me know which JNDI service provider is the ideal for this situation.
    Any type of help would be appreacited.

  • Which Process Chain or DATA Source uses Queue MCEX02

    Hi plz tell me which pc or data source uses Queue name - MCEX02,MCEX04,MCEX05,MCEX05_1,MCEX08,MCEX11,MCEX12,MCEX13,
    Actually these queues entries are blocked in ECC Environment.
    Also provide any document on running jobs thorough LBWE.
    Thanks
    Nilesh

    Hi,
    MCEX02,MCEX04,MCEX05,MCEX05_1,MCEX08,MCEX11,MCEX12,MCEX13 these are the extract structure names of the datasource for the applicaitons Sales, Billing, Delivery, Purchasing....etc.
    If you goto LBWE based on the application component number you can find the datasouurces like 11, 12, 13 are for sales, delivery, billing repectively.
    Check the below link for LO extraction process steps.
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    Hope this helps.
    Veerendra.

  • How to create Geniric data source using the SAP FUNCTION MODULE

    Hi,
    I want to create genric data source using function module
    MD_STOCK_REQUIREMENTS_LIST_API (delivered by sap)
    for this function module where I can find  Extract Structer
    or I have to create ?
    How can i use this ?
    Thanks in Advance

    Hi Shilpa,
                  Check here..........
    Using function module as the generic extractor
    Generic Delta Update using Function Module
    Document regarding R/3 extractors using function module/user exits
    Generic extractors using FM

  • Connecting to Oracle Data Source using SSIS

    Hi Guys,
    Please I am working on a BI Project that requires me to connect to an oracle data source using SSIS.
    Can someone assist me with the required steps to achieve that. 
    I dont want to use a third party tool.
    Thanks
    me

    Hi lilutchay,
    If the SQL Server Integration Services is Enterprise or Developer edition of SQL Server 2008, we can use
    Microsoft Connector Version 1.2 for Oracle to connect Oracle databases with version Oracle 9.2.0.4 or higher, Oracle 10.x or Oracle 11.x. If the SQL Server Integration Services is Enterprise or Developer edition of SQL Server 2012, we can use
    Microsoft Connector Version 2.0 for Oracle to connect Oracle databases with version Oracle 9.2.0.4 or higher, Oracle 10.x or Oracle 11.x.
    While if we want to connect to other Oracle version databases, we can use
    OLE DB provider for Oracle which has been tested in SSIS labs and is recommended by Microsoft.
    For the detail steps for Microsoft Connector for Oracle, we can refer to the first blog suggested by Deric. For more details about the use of connecting to oracle using Oracle Provider for OLEDB from SSIS, please refer to the blog below:
    http://www.databasefun.com/archives/591
    Reference:
    SSIS with Oracle Connectors
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • I'm trying to create a list using CustomSchemalXml property in ListCreationInformation object in CSOM. But, the code throws an error "Invalid List Schema".

    I'm trying to create a list using CustomSchemalXml  property in ListCreationInformation object in CSOM. But, the code throws an error "Invalid List Schema". Any pointers on how to set the CustomSchemalXml property?
    Sri

    Hi Lakshmanan,
    Thanks for your reply.
    I checked this post and there was no solution to the problem there. I undersand we cannot create a list based on custom template in CSOM, but what I'm looking for is how of form xml and set it to CustomSchemalXml
     property, so that everytime when I want to create a list with similar content types and stuff, I can just set the
    CustomSchemalXml  property. 
    Sri

  • I want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

    i want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

    Try temporarily turning off all your firewall and antivirus software until the download has completed.

  • XML Data Source using SSRS intgrated in ShaPoint

    I am trying to use an XML soap data source in my report and use the report in my SharePoint site but I get the following error: (SharePoint integration is configured as trusted site) we changed it to windows authentication but get errors on all reports.
    (error below when using windows security)
    An
    error has occurred during report processing. (rsProcessingAborted)
    Cannot
    impersonate user for data source 'dsSkillsMatrix'.
    (rsErrorImpersonatingUser)
    This
    data source is configured to use Windows integrated security. Windows integrated
    security is either disabled for this report server or your report server is
    using Trusted Account mode. (rsWindowsIntegratedSecurityDisabled
    (error below when using no credentials) I also have unattended execution account set as well but it still asks me for credentials when running the report.
    An
    error has occurred during report processing. (rsProcessingAborted)
    The
    data extension supports Windows Integrated Security and No Credentials
    (anonymous request) only. (rsXmlDataProviderError
    im not sure why it tells me this im using the No credendtials option here.
    I read this but I did everything they said and I still have the errors above
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/acc247b4-3257-47da-9531-fdad5bebcbd4/web-service-as-dadatource-with-basic-authentication?forum=sqlreportingservices

    Hi Pablo
    Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
    Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
    1. You have to have R12 and
    2. You'll need to wait for the patch
    On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
    Regards, Tim

  • Error while creating data source using Oracle Enterprise Manager 10g

    Hi,
    I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
    However, I get an error when I try to create a data source.
    The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
         <data-source
              class="com.evermind.sql.DriverManagerDataSource"
              name="TestDS"
              location="jdbc/OracleCoreDS"
              xa-location="jdbc/xa/OracleXADS"
              ejb-location="jdbc/TestDS"
              connection-driver="oracle.jdbc.driver.OracleDriver"
              url="jdbc:oracle:thin:@hostName:1521:test"
              username="user"
              password="password"
              min-connections="5"
              max-connections="20"          
              inactivity-timeout="30"
         />
    When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
    quote:
    Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
    unquote:
    Could somebody tell me what I'm doing wrong ?
    I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
    I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
    Any help will be greatly appreciated.
    Thanks,
    Shyam

    Thanks for your reply , Steve.
    I noticed that there is a default datasouce on the EM with the following parameters:
    <data-source
              class="com.evermind.sql.DriverManagerDataSource"
              name="OracleDS"
              location="jdbc/OracleCoreDS"
              xa-location="jdbc/xa/OracleXADS"
              ejb-location="jdbc/OracleDS"
              connection-driver="oracle.jdbc.driver.OracleDriver"
              username="scott"
              password="->pwForScott"
              url="jdbc:oracle:thin:@localhost:1521:oracle"
              inactivity-timeout="30"
         />
    The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
    What should be the values for location and xa-location attributes from my "test" data source?
    Any help will be greatly appreciated.
    Thanks,
    Shyam

  • Error while creating data source using table KONP

    Hi Frnds,
       I am creating  a data source (RSo2) from Extraction from view, using the Table KONP , then i getting an error saying that
    Field KBETR with reference field KONWA: ZOXPTS0031 is to replace reference table RV13A
    Message no. R8390
    Field MXWRT with reference field KONWA: ZOXPTS0031 is to replace reference table RV13A
    Message no. R8390
    Field GKWRT with reference field KONWA: ZOXPTS0031 is to replace reference table RV13A
    Message no. R8390
    Regards
    rakesh

    You have to include reference fields also in the extract structure.

Maybe you are looking for