Data sources for infosource 0HR_PA_EC_01

Mistake about this problem, you can close it, sorry!
Edited by: Artur Rodriguez Coma on Feb 13, 2009 1:47 PM

pls go thru this...
http://help.sap.com/saphelp_nw70/helpdata/en/a5/fa5789e50bb84d9ad0380f139b1ea6/frameset.htm
u may get some picture..
rgds,

Similar Messages

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Data Source for MTTR/MTBR

Hi all,
Can somebody say which is the correct data source for MTTR/MTBR. I'm trying to use 2LIS_17_I0NOTIF. But it doesn't have fields for start & end date, time of malfunction. But these fields are mapped in standard infosource 2LIS_17_NOTIF.
With regards,
VMKumar.

Hi Jijo,
We are using 2LIS_17_I0NOTIF and it has both AUZTB (Malfunc end) and AUZTV (Malfunc Start)....check again.
Regards.
Edited by: Venu Gopal on Jul 7, 2009 3:35 PM

Data source for sop

Dear All,
Can anybody help me in finding the data source for the cube 0sop_c01(sales operation and planning)
Is there any other cubes for sop?
Thanks & Regards,
Yunus
Edited by: yunus on May 13, 2008 9:58 AM

Hi,
InfoCube: 0SOP_C01
This InfoCube takes the data from the InfoSource SOP Planning Data (0SOP_PLANNING), which provides the time series data for planning with Sales and Operations Planning (SOP).
Regards,
NR

What are Data sources for 0PUR_c10

Hi ,
Now iam activating BCT for 0PUR_c10 cube in BI 7.0
before activating in BI side can i know
1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
2. plz tell me , what are master data info objects in BW side for MM data ?
i will assign points .....
Thank u
PSR


1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
PO delivery schedule lines are first consolidated in an ODS through data from the InfoSources Purchasing Data (Document Schedule Line Level) as of 2.0B (2LIS_02_SCL) and Offsetting Confirmation and Goods Receipt (2LIS_02_SGR).
http://help.sap.com/saphelp_nw70/helpdata/en/bb/e99a3d35cf6f53e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/41/2b52e35f153014e10000000a114e5d/content.htm
Do look for the dataflow/network diagram for 0PUR_C10 in Metadata Repository - you can find the BContent Flow.
2. plz tell me , what are master data info objects in BW side for MM data ?
Right click on ODS's & Cubes in MM - Infosource Overview - This will give the list of loadable data targets for associated Datatargets.
Go to RSA5 search for the datasources.

Is it possible to use same data source for two info cube

Hi,
My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
"0IC_C03".
Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
Pls. help.
Regards,
viren.

Hi,
You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
Cheers,
Kedar

ODS as data source for the next ODS - can't see the name in the DS list

Hello, experts!
Need your help. I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS. The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS data source name either). I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem.
Any suggestions?
Thank you.
Alina.

OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
In my system the screen can show more than 900... must be one of your user settings in the gui...
just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

Generic Data Source for Hierarchies

Hi guyz,
Can any body tel how to create generic data source for hierarchies, plz give me the steps to do it.
Thanks & Regards
Veera

1. Generate the DataSource for FI-SL sets using the BW IMG (Transaction BW07).
2. FI-SL sets are not compounded in OLTP. If you want to extract FI-SL sets for a coumpound characteristic in BW, proceed as follows:
a) Select the 'BW InfoObject (characteristic) is compounded' field and enter a data element (compound information of the meta data).
b) After generating the DataSource, execute compounding in a customer exit. To do this create, a project for the SAP enhancement RSAP0001 in Transaction CMOD, and program EXIT_SAPLRSAP_004 (ZXRSAU04) as described in the attachment.
3. Execute the following steps in BW:
a) Update the meta data for the FI-SL sets in the InfoSource tree.
b) Maintain the transfer structure and transfer rules.
c) If the extracted set hierarchies contain intervals, you must allow intervals in hierarchies for the characteristic in BW. Check the hierarchy properties of the characteristic in Transaction RSD1 and set the "Intervals in hierarchies allowed"
4. With this solution you can only extract sets created in Transaction GS01 (set class 0000).
If the hierarchy list in BW for the set data source is empty, first check in the OLTP system whether set class 0000 contains suitable sets at all. To do this, start Transaction GS02 (not GS03!). Field Set class may be displayed; if this is the case, enter 0000 there. Position the cursor on field Set name and select F4. Enter the table and field name you specified in Transaction BW07 in popup "Select sets" and select "Continue (Enter)". If message GR003 "An appropriate object was not found" is displayed, the hierarchy list in BW is also empty.
5. For CO groups (set class 01xx), the following DataSources are contained in the standard delivery
·     0ABCPROCESS_0107_HIER                    Business process
·     0ACCOUNT_0109_HIER                       Account number
·     0ACTTYPE_0105_HIER                       Activity type
·     0COORDER_0103_HIER                        Order
·     0COSTCENTER_0101_HIER                    Cost center
·     0COSTELMNT_0102_HIER                     Cost element
·     0PROFIT_CTR_0106_HIER                    Profit Center
·     0STKEYFIG_0104_HIER                      Stat. key figure
On principle, sets can also be created for the DDIC fields of these objects in R/3 GS01.
From Release 4.0, this no longer makes sense since the CO groups can then be used anywhere in FI-SL.
With regard to the conversion of sets to CO groups in Release 4.0, please refer to the FI-SL-VSR Release Information for 4.0A and Notes 92029 and 51132.
6. For other set classes, no DataSources are delivered.

Standard BI Data Source for FMGLFLEXT

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Standard Data Source for FMGLFLEXT Table

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello Sasi and Kirun,
Thanks for your reply,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

OIM 9.1.0.2 - Weblogic JDBC Multi Data Sources for Oracle RAC

Does OIM OIM 9.1.0.2 BP07 support Weblogic JDBC Multi Data Sources (Services>JDBC>Multi Data Sources) for Oracle RAC instead of inserting the "Oracle RAC JDBC URL" on JDBC Data Sources for xlDS and xlXADS (Services>JDBC>Data Sources> xlDS|xlXADS > Connection Poll> URL) ?
If yes, is there are any other modifications that need to be made on OIM, or just changing the data sources?

Yes, it's supported. You install against one instance directly of the Rac Server. Then you update the config.xml file and the jdbc resource in your weblogic server with the full rac address. It is documented for installation against RAC. http://docs.oracle.com/cd/E14049_01/doc.9101/e14047/database.htm#insertedID2
-Kevin

Data sources for infosource 0HR_PA_EC_01

Similar Messages

Maybe you are looking for