Data sources which delivers Delete images!!!!!

Hi SDN,
Can i know what are the avialable datasources in R/3 that are capable of delivering Delete images especially i want to know form SD applicaton.
Regards
Sujan

hi,
u can find it by sing the roosource table by going to se11.
regards
pls assign points if helpful.

Similar Messages

Single Standard data source which extracts material master and vendor master data

Hi all,
I have a client requirement where user wants to view material master and vendor master in a single report. Is there any standard data source which extracts both the data together..
Thanks!
Arvind

Hi,
Two are different master info objects and can't get them from one data source.
think about multi provider or info set on two master data objects to club them.
Info object - 0MATERIAL and data source - 0MATERIAL_ATTR
Info object - 0VEDNOR and data source - 0VENDOR_ATTR
Thanks

Data Source is in Inactive state while replicate datasource in BI 7.0

Hello,
When I replicate the datasource ZW_MAT_PLANT(My own data source which is combination of MARA and MARC) in RSA1-Datasources it is coming by default in inactive mode. In this inactive mode i can not delete this data source assignment adn i can not go inside this data source. While i click change icon to go inside the datasource it is giving me the error like you have no authorization for this datasource.
But from SU53 screen shot i have authorization for this.
Please help me in this.
Thanks and Best Regards,
Anitha Sukhaavsi

Hi,
I am facing the same issue. Did you get the solution for this?
Thanks,
Pal

Mass collection of data sources in Transport request.

Hi All,
I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
Can you please guide me a easy way to capture all the data sources in transport request.
Thanks.

Hi,
you might be able to create a new Transport request and add the datasources manually.
check out the table roosource for the sources. you can find your's by filtering on tstpnm.
add the sources with object 'R3TR' and subobject 'OSOA'.
regards
Siggi

Newbie XML data source questions

Post Author: tel
CA Forum: Data Connectivity and SQL
I'm trying to use the XML data source via http and i'm running into a couple of issues.
First, we have separate environments for development, QA, and production. Each environment will have a seperate URL to retrieve the XML for the report. I would like to use the same report design to access each environment. Is there a way to update the URL in the data source (or replace the data source with one that has the correct URL) without having to re-add the fields to the report design?
The second issue is similar. I can't seem to get Crystal to recognize changes in the XML format (new fields for example) without having to delete and recreate the data source (which automatically removes all the associated fields from the report). Is there a way around this, or again, a way of re-creating the data source without it removing the existing fields in the report?
Thanks,

Post Author: rosariosanto
CA Forum: Data Connectivity and SQL
I have the same problem. Where can I find help about setting the data source when connecting to a web service. Since the hostname is hardcoded in the report, it is necessary to update it in the code.

Delta Issue in Generic data source

HI all ,
    I have a HR generic data source .which extracts only two records ffrom the source for so many days during delta.
   I checked in RSA3 .It shows 16000 records nearly. I did init without data transfer and then delta,still it picks onlys same 2 records .
   Delta setting in RSO2 is Numeric pointer with new status for changed records with field name as"cheque number"
   In BWdatasourceExtraction tab--Deltaprocess is AIE After Image by extractor.Iam not able to choose any other delta process type as it is built from R/3 .I think because of this process type.
anybody faced the same problem .. I tried many ways.. please guide me how to solve. this issue.

HI Prashanth,
                    I checked RSA7 now and I found the problem .In RSA7 the pointer for cheque number is 991749. The delta record created has cheque number 005409 which is lesser than the pointer ,thats why the record is not picking i guess.
       now ,If this is the case ,How can I give delta field.The generic datasource is built on only one table PAYR ,and having cheque number and other fields as keys in the table PAYR.Date is not a key in the table. Please help how to proceed
Thanks
Rgds
Pradeep

How to replicate Generic data source from R/3 to BI

Hi,
I have created generic datasource in r/3 using view. I replicated to BI.
I selected for DataSource (RSDS) instead of selecting 3.x DataSouce.
Now what r the steps to load data into cube.
Please help me in this regard. Please give me detail steps to proceed further.
Thanks,
Jaswantha

Hi,
About Generic Extraction:
In Sometimes the Standard Extraction Does not Satisfy the Customers Needs that time We have to use Generic Extraction.
generic extraction is also classified in to three types
using
1. View
2.Infoset query
3.Function module.
Procedure:
-->Go to Tcode : RSo2,
-->There give the name of data source which you want to create like
transaction data source or master data attribue or Text data source.
-->enter
-->again in the next screen you need to give application like SD or MM
etc
-->in the same screen need to select table/view or infosetquery or
function module. these are different ways of creating data sources.
-->Give the name for the same like if u r creating data source on table
give the name of table.
-->click on Generic delta which will there in application tool bar and
fil the required columns in that screen like type of delta and all
-->continue and save
-->it will give all the fieds
-->enable the check boxes based on your requirement like selection or
hide or field only..
-->save
please see the below links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Re: Generic Extractor - Delta
Re: Generic Extractor - Delta
Please do check the link for step by step for generic xtraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
service.sap.com/bi -> BI InfoIndex
sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
Assign points if useful.

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

STANDARD DATA SOURCE 2LIS_11_VAHDR NOT GETING DATA

RESPECTED GURUS
I AM A NEW BI USER. I AM TRYING TO EXTRACT DATA FROM 2LIS_11_VAHDR WHICH IS A STANDARD DATASOURCE THROUGH RSA3, BUT I AM GETTING A MESSAGE "0 RECORD FOUND" BUT THERE ARE PLENTY OF DATA. I WAS TRIED WITH THE OTHER STANDARD DATA SOURCES AND GETTING THE SAME MESSAGE" ZERO RECORD FOUND".PLS GUIDE ME HOW I WOULD I GET DATA.
REGARDS
ABHAY MAHODAYA

Hi Abhay,
The data source which you are trying to use is comes under logistics. To take the logistics data from R/3 to BW set up table needs to be filled up. To fill the set up table follow the below mentioned procedures.
First Delete the set up table to avoid data duplication:
Go to T.Code: SBIW -> Settings for Application Specific data sources (PI) -> Logistics -> Managing Extract structures -> Initialization -> Delete the contents of the setup table
Fill the set up table:
Go to T.Code: SBIW -> Settings for Application Specific data sources (PI) -> Logistics -> Managing Extract structures -> Initialization -> Filling in the setup table -> Application specific set up of statistical data
Choose the relevant node to perform the set up based on your requirement.
Remember while filling the set up table no entry sould get posted in the relevant tables. So while you do this in production system, you may have to request for user locking for the relevant T.Codes.
All the best.
Regards,
Sarath.

Data in PSA content is different than the data source

Dear Experts,
I am using Process chain to update info cube from data source of a z table. In the process chain, the PSA request request step is having the PSA table number of the correct data source. The info package and the DTP also have the correct data source.
But after executing the process chain, the info cube is not updated with the required data source. It is updated with data from some other data source which is belonging to a different custom table.
I have checked the Extraction of the data source in RSA3. This is extracting from correct data source. But when I check PSA contents through process monitor in process chain log for DTP, I found the PSA content data is different from the data source.
I am totally confused, how this is possible. Can anybody advise me to troubleshoot and fix this issue.
Thanks and regards
Murugesan

Dear Igor,
The PSA request is being deleted in a previous step prior to loading the info package. I can see every time when I run the process chain, the old request number is deleted and a new request number is created.
Still the same issue is persisting.
I also observed one more thing that the second time when we repeat the same process chain, the correct data source data is loaded in the info cube and PSA table. Only during the first time, the PSA table and Info cube it is not updating with the right data.
thanks and regards
Murugesan

How to enhance copa data source.

Hi,
I have to enhance copa data source 1_co_pa300beka_o01. Actually I have to add one field vstel from VBAP table to this data source.
Can you tell me full procedure about enhancing data source ?
It can not be done directly. I think i have to delete and re-create data source in R3 system.
For this i have to do all thing in KEB0 .
Am i right?
So please tell me full procedure to enhancing copa data source also tell me if i enhance copa data source , which type of problem can be come at BW side.
Thanks
Devesh Babu

I'm not sure if we can enhance CO-PA datasources. Even if you can enhance, whenever there are changes to the Operating concern in R/3 you would have to delete and re-create the datasource. While doing this you would have to re-do the appends again. DS 2lis_11_VAITM extracts data from VBAP. Check if the datasource already brings this field. Otherwise enhance it. In the CO-PA dataflow lookup the DSO which has VBAP data from the datasource and get the necessary field.
Other option is to ask functional folks to add the field to the CO-PA operating concern.

Retrieve data source connection string from reportserver.dbo.DataSource

I would like to retrieve the connection string (and credentials) for each of my data sources (without having to click on each individual item). The DataSource table has a column called ConnectionString, but the data type is image, which cannot be converted to varchar. Does anyone have any ideas of how to pull this information from the database?
I have tried converting to binary/varbinary, and then converting to varchar, but I get garbage back.
Note: I am currently using SSRS 2005
Thanks,
Marianne

Hi Jin,
I downloaded your script and was impressed with the information it retrieves, however, it is not formatted very well with the name of each data source being on the same line as the previous data source so I updated the script to create a blank line between
each data source block, and also to include the login credentials used by the data source, and the path for the data source, which is very useful in being able to locate the data source for editing in Report Manager. However, it is not retrieving all data
sources and I don't know why. I know this for a fact because there are data sources defined that are not in the output of this script but I don't know enough about VB to improve the script further, or how the report server is configured to ensure the code
finds the missing data sources.
Here's the updated script.
'=============================================================================
' File:      PublishSampleReports.rss
' Summary: Demonstrates a script that can be used with RS.exe to
'      publish the sample reports that ship with Reporting Services.
' This file is part of Microsoft SQL Server Code Samples.
' Copyright (C) Microsoft Corporation. All rights reserved.
' This source code is intended only as a supplement to Microsoft
' Development Tools and/or on-line documentation. See these other
' materials for detailed information regarding Microsoft code samples.
' THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
' KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
' IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
' PARTICULAR PURPOSE.
Public Sub Main()
    rs.Credentials = System.Net.CredentialCache.DefaultCredentials
    'Create the parent folder
    GetCatalogItems(String.Empty)
End Sub
    ' <summary>
    ' recursivly get folder items from report
    ' server catalog; render to treeview control
    ' </summary>
    ' <param name="catalogPath"></param>
    ' <param name="parentNode"></param>
    Public Sub GetCatalogItems(ByVal catalogPath As String)
        Dim items As CatalogItem()
        Try
            ' if catalog path is empty, use root, if not pass the folder path
            If catalogPath.Length = 0 Then
                ' no recursion (false)
                items = rs.ListChildren("/", False)
            Else
                ' no recursion (false)
                items = rs.ListChildren(catalogPath, False)
            End If
            ' iterate through catalog items and populate treeview control
            For Each item As CatalogItem In items
                ' if folder is hidden, skip it
                If item.Hidden <> True Then
                    ' ensure only folders are rendered
                    If item.Type.Equals(ItemTypeEnum.DataSource) Then
                        'use the GetDataSourceContents to get the definition of the data source.
                        Dim definition As DataSourceDefinition = Nothing
                        Try
                            definition = rs.GetDataSourceContents(item.Path)
                            Console.WriteLine(item.Name)
                            Console.WriteLine(item.Path)
                            Console.WriteLine("Connection String: {0}", definition.ConnectString)
                            Console.WriteLine("Extension name: {0}", definition.Extension)
                            Console.WriteLine("UserName: {0}", definition.UserName)
                        Catch e As SoapException
                            Console.WriteLine(e.Detail.InnerXml.ToString())
                        End Try
                        Console.WriteLine(item.Name)
                        Console.WriteLine()
                    ElseIf item.Type.Equals(ItemTypeEnum.Folder) Then
                        ' recurse
                        GetCatalogItems(item.Path)
                    End If
                End If
            Next
        Catch ex As Exception
            Console.WriteLine(ex.Message)
        Finally
            'Do nothing
        End Try
    End Sub
To run this I use:
rs -i GetPropertiesOfDataSources.rss -s
http://<reportserver_name>/reportserver > DataSources_<reportserver_name>.txt
But as I mentioned it is not picking up all of the data sources and I don't know why. I also don't know why it's so difficult to find all the data sources from within Report Manager. I'm new to SSRS but was told that prior to SQL 2005, this information was
easily available using Management Studio to connect to the report server but now it's buried in the Report Manager and not accessible from one spot. Bad move by Microsoft apparently. You'd think that there would be an easy way to find all of the data sources.
We need to migrate the SQL Servers on which reports are running, but we have tons of reports and, historically, little documentation for them so we need to be able to determine where all the data sources are so we know which to update. This is proving extremely
difficult. Your script helps but is not comprehensive.
Any and all help is appreciated.
Michael MacGregor, Senior SQL Server DBA, Carlson Marketing

Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

Create two or more data sources and mapping to DSO

Hi,
I´m using SAP Netweaver BI 7.0.
If there are two or three data sources which have to be mapped to DSO which field from Data Sources has to be mapped to which field in DSO?
Is it possible to have only one DSO or should it be three DSOs because of the three Data Sources?
The thing is I have created one view out of three tables. For the view I have created one DSO. Everything worked fine. But now the requirements have changed because of currencies.
The view I have created is now mixing currencies because in the view is only one currency field, which is filled from the three tables. Two tables have different currencies and one table has one currency.
The one currency of the one table is important and should stay like it is.
I´m thinking about something like three different currency key fields in DSO which are mapped from data source. Also for every field of data source mapping with corresponding field in DSO.
Some hints? I have found articles in SDN about creating data sources and so on but they don´t help me in this matter.
Thank you in advance!

Thank you guys for explaining! I´m new to SAP BW and trying to better understand.
I`ll try it also with the view. It sounds "easier".
But if I´m doing it with the 3 data sources, that means that for each currency field of the data source I will need an corresponding currency field in the DSO for mapping.
Is it possible to have 3 times the 0Currency field in the DSO and each data source currency field will be mapped to the DSO?
If that would work the 0Currency has to be contained in the key figures.
But if the 0Currency is contained in each key figure will the assignment of currency work correct?
+For example:+
Data Source1:
Turnover in Euro.
(All currency is in Euro)
Data Source2:
Profit in Dollar.
Profit in Euro.
Profit in Yen.
Profit in different currencies available.
Data Source3:
Sales in Dollar.
Sales in Euro.
Sales in Yen.
Sales in different currencies available.
For mapping from DataSources to DSO if it is possible to have 3 times 0Currency in DSO:
Data Source1 currency fiield ---> DSO 0Currency
Data Source2 currency fiield ---> DSO 0Currency
Data Source3 currency fiield ---> DSO 0Currency
Does it make sense?

Data sources which delivers Delete images!!!!!

Similar Messages

Maybe you are looking for