Data storage and Confidentiality

How long is data stored by FormsCentral?
Can I request the removal of specific data?
Will FormsCentral access any of the data I collect?

The data is removed when you delete your form.
Randy

Similar Messages

  • Data storage and read

    Hello all,
    I got a problem in data storage and read. I used the combination of "Open data storage", "Write data" and "Close data storage" to store some data as an array as shown below.
    And used the inverted combination to read data as shown below:
    As shown the data file is in tdm form. This works fine in my computer, both the VI and the stand alone application. However when I run the stand alone application in a target pc, the storage file can't be generated!
    I don't know if it's the problem of my code or the problem of the target pc, since the target pc has tiny memory card with few drivers installed. I'm wondering if anybody could help me fix this problem. If there's other way I can store and read the file? or if I can make the target pc generate the tdm file.
    Thanks!
    Chao
    Solved!
    Go to Solution.

    What error is being presented when the file isn't being generated?  Is it an error with permissions?  Or an error with a folder not existing?  Can you manually make a file in the location where you expect the file to be generated?
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Data storage and retrieval

    I am working on a project that requires the storage and retrieval of about 70 unique values per class. There are also about 60 different instances of this class- all with 70 unique values.
    For security reasons, I am reluctant to use a separate database to retrieve and store these values and have opted for Collections, using Hashmaps or Treemaps to store and retrieve. Is this the only way forward?
    Have been working on Java for only 18 months so still a bit green. Any guidance would be appreciated.
    Thanks

    I do need persistant variables and a database is certainly the tidiest option however, the data security required is not only to preserve the data integrity but it is also of significant commercial worth, hence the attraction of going down the hashmaps/treemaps route. The aim is to deploy the software without needing to reference an external or local database.
    I'll do a bit more research into database security before scrapping the idea altogether.
    Thanks
    Kola

  • S6 IPSec Service Data Storage and WiFi Calling

    Hi,
    Can any other S6 owners tell me the storage size of the IPSec Service application.
    Then can you tell me if you have wifi calling enabled.
    I am getting the run around between EE and Samsung as I think there is a data leak in the wifi calling.
    My IPSec Service application is taking up 5.16GB and there is no way to clean this other than a phone reset.
    Cheers
    Ian

    I have the same issue. Only 1.6gb though. I heard this is some sort of memory leak and 5.1.1 should fix this issue. But being EE and a Samsung device, who knows when the update will arrive! 

  • Data storage and aggregation levels

    Hi,
    I want to know, in facts and dimensions, where is data stored? Is it on multiple levels of aggregation? Or it does not depend from aggregation and it is stored at the lowest level?
    Thank you.

    hi,
    It is not stored as aggregations,the data is stored as de-normalised format and that data is picked up by BI server and process the data accordingly applying the conditions and coming to aggregations it will push down the functions applied on that to lower level.
    hope it clears your doubt.
    By,
    KK

  • Use an external HD with Airport Extreme to access it for data storage from computers  connected to the WiFi network?

    Can I connect My Passport HD into my Airport Extreme's USB port to access it from my computers (27" iMac 2012 now using Yosemite) on that Wifi network for data storage and retrieval purposes?

    Yes, if the AirPort base station's hardware supports 802.11n. The drive needs to be formatted as Mac OS Extended (Journaled), FAT16, or FAT32, and may need to be connected through an USB hub with its own power supply.
    (117777)

  • Data storage in Swing application

    I'm currently developing a book collection application, which allows a user to search/add/delete entries. I thought about data storage and figured that perhaps just using XML files would be best, since there would only be a few hundred records involved. Would it be easiest to use JAXB for this type of thing? Or perhaps an XML database instead of a few XML files? I'd really appreciate any hints or comments.

    My personal opinion: no, keep it simple.
    A simple XML handling is done by both:
    dom4j www.dom4j.org (better documentation), and
    jdom[7b] www.jdom.org (better performance the last time).
    Use for instance dom4j-full.jar with XPath support for element selection.

  • My iphone 4 has no data storage. I have deleted all apps, music and texts and it still says I only have 1.9 GB available. There is nothing in my storage.

    My iphone 4 has no data storage. I have deleted all apps, music and texts and it still says I only have 1.9 GB available. There is nothing in my storage.

    The problem could be that you don't have enough storage on the device itself, not on iCloud.  Go to Settings>General>Usage to see how much "Storage" you have available on the device.  Farther down the list is the available storage on iCloud.
    Also check:
    Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well.  Tap Show All Apps to get the complete list of apps and MB used for backup storage.
    A device needs many MB of storage in order to perform a backup to iCloud.
    Also see:  http://support.apple.com/kb/ht4847`

  • For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

    If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
    If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847.  It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email. 
    The other area to look at is your text messages.  These are included in the backup.  If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup.  If that's the case, deleting these may make a big difference.

  • I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data in addition to backing up the hard drive?

    I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?

    Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?
    Yes, but if you move the "original" data on your iMac to the Time Capsule....then the "original" data is now on the Time Capsule disk. 
    When...not if...the Time Capsule disk has a problem, you have no backups for this data.
    Perhaps a much safer plan might be to add an external hard drive attached directly to your iMac. Then, move the data to that drive from the iMac.
    Now, Time Machine will back up both your iMac and the external hard drive so you have "originals" on one drive and backups on another. Would that plan work for you?

  • Exchange 2010 SP3 UR2 and Event 4999 = AirSync, M.E.Data.Storage, M.E.D.S.AppointmentTombstone

    Hello together,
    i'm having the following event on my cas servers every about 30 minutes:
    Event 4999 MSExchange Common
    Watson report about to be sent for process id: 5780, with parameters: E12, c-RTL-AMD64, 14.03.0151.000, AirSync, M.E.Data.Storage, M.E.D.S.AppointmentTombstone..ctor, System.OverflowException, 7f09, 14.03.0158.001.
    ErrorReportingEnabled: False
    it looks like it is a known bug fixed in SP3 UR3 (http://support.microsoft.com/kb/2891587/de) ?
    http://support.microsoft.com/kb/2888911/de
    they are talking there about a workarround to delete the problematic "thumbstone data". but how to find and identiy them before deletion ?
    "To work around this issue, use the MFCMAPI tool to remove the corrupted tombstone data."
    thanks for feedback,
    best,
    martin

    Hello Martin,
    I have a user who is having this exact same issue. I know this thread is a few months old, did you ever find an answer to where the corrupted tombstone data was located at?
    thanks,
    Emmanuel Fumero Exchange Administrator

  • Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

    I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
    Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
    ...errors with the following output:
    An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
     Additional information:
     [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
    es..
        + CategoryInfo          : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
       OutlookConnectivity], CasHealthStorageErrorException
        + FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
    I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG.  The command works well if run a CAS server in the active DB site.

    Hi,
    Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
    https://www.testexchangeconnectivity.com/
    Thanks,
    Simon Wu
    TechNet Community Support

  • Hi,i need to upgrade my 13"late 2011macbook pro with an ssd drive.i have noticed there is a system hard drive for booting up and a data storage hard drive that my computer uses,are these the same hard drive i can see inside my laptop?

    hi,i use logic pro 9 and cubase to record,produce and master audio recordings and have bought a mac as recommended.have upgraded to 8gig memory (which i was told was the maximum you could upgrade a macbook pro)and still my recordin is slightley behind plauback.i need to replace my hard drive with a solid state drive to solve the problem.i have seen on youtube how to replace the hard drive but have noticed on the disk partition information that there is a 500gig harddrive for the system(booting up ect)and a 500gig harddrive for data storage,are these the same unit?i need to be sure im upgrading what the system uses to an ssd as well as the data storage or the problem wont be solved.i have an external hard drive so i have been looking at a smaller,faster ssd. hope you can help!

    DaisyMay wrote:
    Firewire 400/USB 2.0/1.1
    I would recommend not settling for less then USB 3 or hold out for Thunderbolt, if your machine is capable. Firewire 800 minimum.
    MacBook Pro, Mac OS X (10.7), 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop6.0

  • Windows 7 64bit Raid 1 Data Storage setup with UEFI and 6TB drives

    i just bought a GigaByte MB with UEFI bios, 1 SSD 128GB drive for the OS (boot up), and 2 6TB drives for use in a raid 1 setup for the data storage.
    I have been able to install win 7 64bit using the UEFI dvd drive.  I have been able to define the 6TB mirror via the bios (under the Intel Rapid Storage Technology option) .  But when ever i go into windows, and check under Disk Management, i don't
    see the raid 1, i see two drives listed for the data, each at 1492 GB.   I should be seeing 1 drive at 5.4TB.  
    note: I have tried re-installing win7 64bit many times to see if i have missed something.   When i run setup off uefi dvd drive, i see that drive 1 (of what should be part of the mirror) and drive 2 are listed there at the reported 1492 GB size each.
    So it seems that win7 doesn't see that mirror that i created via the bios. So is this a bios setting problem somewhere?   i presume on this screen i should see the correct mirror size already.
    Also, do i need to install win7 via the uefi dvd if  i don't want to boot off those large drives (i just want to boot off the ssd. But when i did try that using a legacy mode, i couldn't later try to create a single large drive for the mirror using
    GPT formatting.  it just wasn't an option.  although the mirror was recognized as 1 drive, but broken into 2TB and 3TB.)
    what could i possibly be doing wrong??  
    Thanks for any help

    Thank You Roger.   I did call Gigabyte.   This is how i solved it with the gigabyte support team. 
    1.   Don't try installing Win7 64bit sp1 and setup RAID at the same time.  (even go ahead and unplug those raid drives if you have it plugged in).   The OS should be installed first on the boot drive, but make sure the BIOS is already set
    to RAID (not AHCI.  If you already installed OS under AHCI, you need to reinstall OS.  i find this crazy because what if you decide to install raid down the road.. to an existing machine.. you can't do that because of this).     Make sure
    to install OS with the UEFI dvd drive option (i had done this).
    2. Once the OS is installed, install all drivers that come for the Motherboard... That should include intel Raid drivers. (note gigabyte support didn't tell me to do this, but i didn't want to take a chance to have to reinstall OS again or have more problems,
    but it makes sense.)
    3. Now i have the GA-H97-Gaming 3 mother board, it had Bios F3.  I upgraded it to F5 as per support tech.
    4. turn off machine, and replug in the two 6TB drives.
    5. after reboot, i find out that i no longer see Intel RAPID Storage Technology. (this should have displayed when i set the SATA Mode Selection to RAID before i started all this business... it did under bios F3, but not under F5.. bug??  i think so,
    so i plan on letting gigabyte know about this).  This is a problem.  In Intel RAPID Storage Technology is where you define the RAID in the first place.    OK, well after several reboots.. i tried to use CTRL-I to get to intel's interface
    rather than that of the gigabyte bios.   Voila... i define the Mirror... 
    6. I am able to boot into OS.   I got to Drive Management.  I now see 1 6TB drive.  I initialize it of course using GPT.  Format it.  All all looks good now.   
    Hope this helps someone.. took me enough tries to get it right.   I really am bothered about requiring the OS installed in the correct SATA mode just to get RAID working.  As i mentioned, you can't change your mind afterwards without reinstalling
    OS.   Also i couldn't even get the OS setup to start when i had those raid drives plugged in.. so make sure to unplug them.
    Best Regards.

  • I know have a document and data storage on my iTunes. how do you get rid of it

    i know have a document and data storage on my iTunes. how do you get rid of it

    Very helpful, ty.
    FYI for others. I also had to disable the Default Tab 1.0 addon.

Maybe you are looking for

  • How to use Amplitube plugin?

    I installed Amplitube Live, put it in the Audio/plugins/components folder and have no idea how to use it in GB. I want to see what it will do to harmonica. I tried another IK product, a demo, Sampletankfree, and got nowhere with that either. IK says

  • Colors not showing up in Photoshop. Worked fine the first day, now when I click on a color it comes out in gray tones. Pop up about RAM storage?

    Just downloaded Photoshop and there was a pop up box that mentioned my RAM and something about not enough RAM left for certain 3D features, filters, and image/color graphics(?). I continued. Everything was working fine the first time I went to use it

  • Help: URL encoded in Base64 not working with SP4

    With SP1, there was no problem but after installing SP4 (don't know whether it is accidental), this problem started occurring and I don't know what caused it. Here is the description: I have SP4 running on Solaris 8. An applet is launched and sends a

  • Upload to Phase 2 of HFM when Phase 1 is closed

    Hi everyone, Im facing a challange, that im struggeling with. User is creating one file, containing information about IC and normal BS and PL. The IC Information is send 4 days earlier as the remaining informations. After the first upload the phase i

  • Manual Create TOC Anchors in Exported ePub

    Does anyone have a good tutorial on how to manually insert invisible TOC Anchors into the ePub xhtml files? I have just finished laying out a novel in which I'm using images as chapter headings instead of actual text.  Because of this, I can't just h